ARC mouse doesn't respond better after battery change

Similar Questions

• HP Wireless Bluetooth Z5000 MB: Stopped my mouse clicking after battery change wireless

  I was using the mouse Bluetooth Z5000 successfully for about 5 months until that the battery needed to change.  Now the mouse does not control as he did, that is, a discreet, noterrtic, and surface mouse click not at all.  A little help, please?

  Hi @Justjoan123,

  Thank you for your update.

  I suggest you contact HP support for further assistance that you have excluded from software.

  Please contact HP to Contact HP Supportassistance.

  Please update me the results.

  Thank you

• Phone locked after battery change

  Hello world

  I replaced my battery on my 3 g phone and now everything is gone and I get a connect to the iTunes message? Help, please

  Thanks in advance

  Looks like you screwed up when you changed the battery.

  Now that you've opened the iPhone that apple will have nothing to do with it once again.

• ARC mouse and wireless keyboard to stopped working after update

  On Tuesday, my keyboard Microsoft's ARC mouse and wireless are busy to my desktop HP running Windows 7 Ultimate.  Since then, there has been a number of updates installed and the ARC keyboard and mouse are no longer works.  I got out my old clumsy Laser Keyboard 6000 and plugged in and it does not work this is how I write this.  But enter the Device Manager or the installed Microsoft keyboard application does not show the ARC keyboard or a mouse as even installed.  I plan to do a system restore, but I probably need security updates installed on 4/14.  Ideas?

  UPDATE:

  Thanks for the suggestions.  I would have thought than to simply unplug it disconnected and reconnected the cause would detect automatic to reinstall drivers, as suggested by @cookie7746 - but it was not detecting the keyboard and the mouse at all, even at the start of the system when only the BIOS is running.  Who told me I could have a hardware issue not only a software driver problem.  I followed him there down to a faulty USB Extender.  Not related to the software, but a hardware problem.  When I replaced the USB Extender that the connections for the mouse and keyboard of the CRA is well connected, everything works.

  So suggestion for those who encounter it: try restarting and during switching on, press the function keys that you use to enter the BIOS settings screen - it is usually CTRL/A or F10 or something - it will usually tell you in a message is displayed briefly that you start.  If it works, you know that you have a good physical connection and the problem is a Windows driver issue.  If this does not work, the problem is not with Windows - it's a hardware connection problem that can be caused by low batteries or dead in the camera (I had this happen to me) or something with USB connections.  Best suggestion at this point is to start eliminating things (like me) by unplugging it the USB Extender, I had these connected directly to USB ports on the computer.  With this process of elimination, you should be able to narrow down the problem.  Good luck!

• The mouse is not responding in screen saver mode

  When my phone goes to the screen sleep screen my mouse will not respond and when I move it so that the screen saver turns off, but the keyboard works. I'm using the Toshiba provided the default screensaver when I bought the laptop

  Can someone help me with this problem?

  Hello

  So, first of all: the screen saver has absolutely nothing to do. It s of a driver problem and I suggest you to update your driver software of touchpad and touch pad.

  A better idea would be to uninstall everything that has to do with the touchpad, and then install the latest version of this software.

  Another good idea would be to update all existing drivers in your system and do all the updates system (related to windows).

  Greetings

• WZC doesn't stay on after restarting my computer HP mini.

  Original title: WZC

  WZC doesn't stay on after restarting my computer, HP mini, WIndows XP Home edition SP3. Whenever I need to restar it manually. Please respond immediately. Thank you.

  Hi shyambhatn,

  Thanks for posting in the Microsoft Community.

  Before you start the troubleshooting steps, I need the information required.

  1 did you changes to the computer?

  2. are you referring to Wireless Zero Configuration (WZC) Service?

  Method 1:

  I suggest you to see the links and check.

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702/en-us?p=1

  Method 2:

  I suggest you run the System File Checker and verify.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  See also:

  How can I disable wireless configuration and enable Windows XP Wireless Auto Configuration services

  http://support.Microsoft.com/kb/968682

  Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.

• the desktop icon doesn't responde

  the desktop icon doesn't responde after I run vaio care, whenever I do system restore I have windows vista

  Hi Burela,

  The desktop icons cannot answer for various reasons, including the links broken or corrupt, malwares, viruses, etc..

  Method 1:

  Please visit the following link to fix the problem.

  http://support.Microsoft.com/GP/system_maintenance_for_windows

  Method 2:

  If method 1 does not resolve the problem, please start the computer Safe Mode and check if desktop icons answer. Please refer to the city link below to start the computer in Mode safe:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3:

  If the desktop icons work properly in Mode without failure, you can perform the clean boot and check with the program or the conflicting service. Please see the link for the steps to perform the clean boot below mentioned:

  http://support.Microsoft.com/kb/929135

  Method 4:

  If the problem persists, try to create a new user account and check if that helps. Please visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Kind regards

  Gaurav Prakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Arc mouse recognized but does not work

  I have a Microsoft Arc mouse I got a few days before... I just got the possibility to use it today and when I inserted the dongle installed system drivers and device recognized as a mouse Arc... but when I moved the mouse nothing would happen... When I fold and re - open the mouse the green light for 20 sec. and then turns off again... and no blue light comes from the bottom of the mouse.

  I tried to install Intellipoint, nothing helps...

  Please advice!

  --

  b0iNg.

  Hi - I actually found the problem and the solution.

  The problem is related to the Microsoft Bluetooth power management feature. You must turn off the power for the bluetooth mouse management.

  Unfortunately, I discovered the issue after I returned the device to Microsoft. Given that Microsoft was aware of this feature, that I'm really surprised to see that:

  1. It is not mentioned in the manuals for the Arc Mouse
  2. He is not mentioned anywhere on the help of the advice provided by Microsoft
  3. He made public not much at all

  I bought a Logitech mouse - which had exactly the same problem, and that's when I realized it was a systematic problem. I kept digging and came across the answer that worked - disable power management.

  I'm surprised that it is not made more transparent - I see forums and others that it is a very big problem. Epic fail for Microsoft on this one.

  In any case, I hope this helps others!

  -Brant

• Microsoft Arc Mouse does not work properly.

  Original title: arc mouse problem

  I have an arc mouse. When I turn on the computer it works, but when everything started the pointer just stops and of course the mouse does not respond. I tried several times to uninstall and then install the drivers again and restuarted the computer.the butteries are new.what can do?

  Hello

  Thanks for the reply.

  I suggest you to contact technical support for Microsoft Hardware to improve the assistance.

  Visit the link to contact the material Support

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Using the windows-related issues feel free to post on Microsoft Community.

• Satellite L70-A-K5S bluetooth mouse is not responding

  I used LaserTravel Logitech bluetooth mouse V470 for a few years with Toshiba Satellite P300 (Windows Vista).

  Now, I upgraded to a-L70-K5S and reconnected the mouse for this laptop.
  After using it for a few minutes, the mouse is no longer in effect.

  If I pass/enable the mouse, it works fine. Sometimes he wakes himself.
  I tried to install the software of Logitech (SetPoint), does not help.

  When I reconnect the mouse to the old Satellite it works fine.
  The mouse is supposed to be supported in Windows 8.

  Maybe the batteries BT goes out for some reason?
  Any ideas?

  At this stage it s not easy to say if there is a problem with your laptop s BT or maybe the mouse BT or perhaps the compatibility between BT mouse and win 8.

  I found this article in the knowledge base on the page of Logitech V470 BT connection problems.

  [My V470 Cordless Laser Mouse for Bluetooth does not work: http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/20491/section/troubleshoot/crid/398/lt_product_id/3287/tabs/1, 3,2,4, 5/cl/we, en]

  You should check it out.

• Win XP on Satellite M30X does not start after battery was flat

  XP on M30X will not start after battery was flat! Safe mode, last work... nothing works!
  The restore CD offers 3 options1: new installation, 2 toshiba recovery utility (expert mode) und 9 output.

  How do the XP Recovery console, or how to use 2 to restore the system without losing any files.

  Thanks for the tips.
  It is a nite Mare...

  Wolf
  Good day

  The point is that the Toshiba Recovery CD does not have the Windows XP repair console.
  The restore CD contains the image of Toshiba and you can just reinstall the system on the HARD drive and no repair.

  Now you have 2 options of recovery.
  First called standard recovery option would be to format the entire HARD drive and reinstalling the image.
  The second option called recovery expert allows you to reinstall the operating system on a selected partition. Then only this partition will be formatted.

  If you do not want to format the whole HARD drive then you select the second option and select the partition to a new operating system.

• Is my computer better after BIOS update?

  Dear Sir.
  I have the idea that my tecra M2 works better after upgrading the bios (from 1.3---> 1.5): sometimes I had the problem that wifi has not begun well, the fan was too often running: after the upgrade of these things worked much better!
  Some people have the same experience?
  Thanks in advance
  Dr. weekx reg

  Hi Reg,

  It is quite possible that you will see some 'differences' in the behavior patterns of your laptop after BIOS upgrade to a later version. Each new version of a BIOS can contain corrections or adjustments to the previous ones and values parameters and can even contain new features. Unfortunately, the new version of the BIOS can also contain changes that may negatively affect the system or make it less compatible with the old facilities and devices.

  I generally adopts the principle that the BIOS should be updated if a specific problem is currently experienced in the hope that the latest version of the BIOS can be beneficial.

  I am pleased that your update has worked well for you on this occasion.

  Best wishes

• 4340 proBook s: 4340 Probook s camara doesn't work anymore after upgrading WINDOWS 10

  Internal to the device doesn't work anymore after upgrading WINDOWS 10.

  All the drivers are up to date.

  I also downloaded the HP device drivers, but they offer several types.  I don't know what device to install.

  Also, I don't know what I can do.

  If someone can help me...?

  Thank you.

  The problem is resolved.

  Not in the way I wanted to (using the internal camera), but I bought an external camera.

  It works without any problem.

  So for me the problem is resolved.

  Thank you for given applications.

• Microsoft Arc Mouse will stop when the lid is closed

  I have a samsung R505 running vista. Now, I chose to connect it to my TV with an HDMI cable. I would like to place the laptop in a cabinet under the TV and use my keyboard and mouse wireless Arc MS, but when I close the lid of the portable computer, the mouse freezes and jumps from one point to the other when he moves. This happens when the cover is open.

  I have configured windows not to sleep when the lid is closed and I checked and my mouse drivers are up to date.

  Any help on this would be appreciated. Please let me know if you would like more information on my put upward.

  Thank you
  Chris

  Hi Chris,

  You can uninstall the mouse and try to download the latest version of the software and the mouse drivers and check.

  You can read the following article and try Method 1 to uninstall the software.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  You may rfer to following article to download the latest version of the software and drivers.

  ARC mouse Software and Driver Downloads

• waterproof function water after battery replacement

  I use xperia z2 of the last six months. My phone does not work well. But I need to know whether or not water proof feature will be retained after battery replacement. A comment on this topic.

  You replace the battery? If you do this in a sony service, they will keep the waterproof ability to water from the unit.