Office upgrade to win 8

Similar Questions

• WHY WHY WHY I PAST so MUCH BLOODY TIME ON BLOODY WINDOWS QUESTIONS WHERE THE * they PUT MY OFFICE 2010 IN THE BLOODY UPGRADE TO WIN/8

  I'm sick and tired of ruining my bloody life hunting victory/8 questions and my tracking where my office 2010 went I did not the bloody time, where is my "OFFICE 2010"

  Win/7, and it was done through a download and had to reboot a couple of times before came out correctly and not the Office of Skydrive isn't the office, I mean, I prefer my office that I bought "the Office 2010, fortunately I have my office in my other computer as I installed it on my three computers , but it's my main computer and I would like to ask Tommy, is there a way I can transfer my office lock stock and barrel on this computer if you please and please excuse my ignorance on the matter, but I have some questions around a head injury, which leaves me confused when you try to follow the instructions.

  Thank you for your time

  If you have performed an upgrade in place dedicated to Windows 8 of Windows 7, Microsoft Office 2010 is still installed and must be localizable/able to work without any problem.  So the link I gave in my original answer which - when visited - explains how to start a Microsoft Office application in Windows 8 * if * Microsoft Office is installed.  Given the trouble you've had so far, I would first try the instructions 'charm research' on this page.
   
  If you have performed a clean installation somehow (rather than an upgrade) - then, you need to install Microsoft Office 2010 again from the installation media.  If it's a download (Microsoft Office), you must either download it again or if all goes well you copied the files/Installer downloaded to external media.  You also need a product key for Microsoft Office 2010 in this case.

• After the upgrade to WIN 8, Office and other programs are lost?

  After the upgrade to WIN 8, have been uninstalled all of my programs, including Office 2010. Does anyone know if there is a way to get back programs without having to reinstall everything?

  If you have selected "keep settings of Windows, files and applications, then you should still have Microsoft Office installed. You have not selected this option during installation?

  

  Besides being able to keep your Windows settings and personal files, you can keep your personal files too during the upgrade to Windows 7. If you choose No, Windows 8 place your files in a folder named Windows.old.

  If you have not selected these options, you will need to reinstall your programs since the original installation disc.

  

  To launch your applications, go to the start, screen by pointing your mouse pointer on the left corner of the screen of Windows 8 and click on it.

  

  Do scroll to the right and start your application.

  For more information about how to install Windows 8 applications, see the following article:

• How to get windows 7 ISO for computer laptop w/win 7 preinstalled, upgrade to win 10 in July, recently replace HD / reinstalled win 10

  Dell Inspiron N5010, windows 7-64 bit preinstalled when you purchase. one of the first free updates for windows 10 in July. recently replaced (fatal) of hard drive and reinstalled windows 10. I'm trying to get an ISO of windows 7.  This has proved to be quite difficult. my attempt to replace my hard drive using the old product key failed because the site does not accept the keys to the pre-installed versions.  If I understand it well in an article I read it says that when I upgraded to win 7 to win 10 product key remained the same. However, when my hard drive has been replaced and windows re-installed 10 this product key has been replaced with a digital license.  I have 3, possibly 4 questions: 1) has my product key now a digital license? 2.) If Yes, this digital license can be used for windows 7 ISO? If Yes, where can I find the digital license? (4.) If none of the above, any suggestions how I can get a copy of windows 7 Iso? I am very frustrated and ideas.

  Thanks VeeW

  When you upgraded from a previous version of Windows or get a new PC preinstalled with Windows 10, what has happened is that the hardware (your PC) will get a digital right, a unique signature of the computer which is stored on the Microsoft Activation servers. The real Windows 7 or Windows 8 license you were using previously will be exchanged with a key to the diagnosis.

  Whenever you need to reinstall Windows 10 on this machine, go just to reinstall Windows 10. It automatically reactivates.

  Therefore, there is no need to know or get a product key, if you must reinstall Windows 10, you can use your Windows 7 or Windows 8 product key or use the reset function in Windows 10.

  If you are prompted to enter a product key, click on "I don't have a key" and "do it later".

  Even when you switch to Windows 10, you can return to Windows 7 at any time. Get Windows 7 reinstall media will be dependent on certain factors.

  1: you may contact Dell to recovery media:

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/en/backupcd_form?c=us&l=en&s=Gen

  1-800-624-9896

  2: Download and create a bootable, then reinstall using the product key on the COA certificate:

  Microsoft Windows and Office ISO download tool - HeiDoc.net

  then

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• How to stop Windows Update to force an unwanted win7 upgrade to win 10

  Can someone tell me how to stop Windows Update to force an unwanted Win 7 upgrade to win 10.

  Currently, I have 50 + 'important' updates pending and 3 updates "optional" (which one is ranked 10 Windows), but even with 10 Windows Update is not selected and the value "hide this update" the only option shown in Windows Update is upgrading to Windows 10.

  Any attempt to install ONE of the other Win 7 or MS Office updates translates into Windows Update, saying that it is downloading Windows 10.

  I would like to install updates Windows 7 (and MS Office), but given the way that Microsoft has put on several occasions customers for a forced update to win 10, I'd really rather not count on leave install Win 10 and just hope that the 'Roll Back' option really works without leaving me right where I am now.

  I used this: http://blog.ultimateoutsider.com/2015/08/using-gwx-stopper-to-permanently-remove.html

• Just upgraded to Win 7 Pro to XP Pro - could not find a way to create shortcuts!

  OK, just for the record, I'm on Windows 7 Pro, just upgraded to Win XP Pro, a MacBook Pro using Parallels 8. So far, I love Windows 7, a cleaner and sharper than XP interface. But since I don't have installed it for a few days, I run into some nagging problems. As...

  ... OK, I agree with Office 365 and have all the programs under "other programs > Office 2013." For the life of me I can't understand how to create shortcuts to office programs.

  Can anyone help?

  Thank you

  Clinton

  Make a right click the program under Office 2013 list and go to send to-> Desktop (create shortcut)

  Do this with all programs.

• I upgraded to win 10 now creative cloud is a blank page and apps are tests of ideas until I cancel

  I upgraded to win 10 now creative cloud is a blank page and apps are tests of ideas until I cancel

  Hello

  For the white cloud screen creative,.

  Reference:--

  :New Creative Cloud application unusable: it is empty!

  and also try:-screen black at sign - in | Creative Office Cloud app

  For the trial;

  First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

• How the upgrade to win 10 going to happen?

  How the upgrade to win 10 going to happen?

  Please check this thread
  https://Forum.Toshiba.EU/showthread.php?83832

  You will find the information provided by Toshiba as well as details of Microsoft about the new Windows 10

• Satellite M840 - no upgrade to win 8?

  M840 satellite is not in the list cell phones supported upgrade 8 Win.
  But research has shown that the drivers support.

  Where ican are they?

  ?? LP, me please!

  Hello

  On the page of the Toshiba UE driver you can find Windows 8 for the Satellite M840 PSKFJV pilots.

• Satellite L755-M1M3 driver sound problem after upgrade to win 10

  Salvation;
  I have problem with audio driver Toshiba Satellite L755-M1M3 after upgrade to win 10, the sound does not normally work in YouTube or Facebook even when I play the video files from my computer it is dug into the sound or noise goes, I update the driver but not help, can you help me please, I have Toshiba backup files how can I restore it?

  Inability of Toshiba to make the solution, always shocks me. !!! ???

• HP 450-011: delete the recovery partition after upgrade to win 10?

  I have a new HP 450-011 and it came with Win 8.1 and the recovery with the letter D: drive partition.  I did the upgrade to windows 10.  I made a set of recovery DVD for win installation 8.1.  Is there a reason for me not to delete the D: drive and replace it with my information?  I seriously doubt I'll want to roll back to 8.1 Win.

  Greetings,

  Have you tested the Win 8.1 HP Recovery disks before installing Win 10?

  A question is: If you need technical assistance from HP tech for a possible hardware problem. HP normally requires that the factory installed operating system to take in charge. This policy of HP may have changed during the upgrade to win 10. I do not suspect.

  You can export the recovery, Partition because it will not work now in any case.

  But you need a way to go back to win 8.1 when you need HP warranty support.

  Since you have already upgraded to Win 10, the only way to check the recovery of 8.1 Win disks is to use them and start all over again. Or the support of disks/USB recovery HP Win 8.1 on a new equivalent or larger HDD or SSD. A good installation means that you have now the factory install on this disk.

  It's a lot of work.

  The problem of guaranteed support is your problem.

  I have eliminated this problem by installing Win 10 on a new SSD. I have HP Win 8.1 on a separate SSD and win 10 on a different SSD. Possible guarantee problem solution means earn 8.1 running on HP SSD factory to check the problem of winning 10 SSD.

  Hemdani

• Blue screen after upgrading to Win 8.1 - Satellite C850 - 17G

  A year ago, I bought a Satellite C850 - 17 G (PSKCCE) with Windows 7 pre-installed. For a small fee, I upgraded to Win 8. Worked well.

  In November 2013, I wanted to do the free update to Win8.1. There I estimated at 2.5 months and a lot of reading on the forums to complete the upgrade to 8.1 Win. Everything worked fine for about 3 weeks.

  Can I get some updated windows up-to-date pressed, restarted the laptop and it ended the history of success.
  Blue screen and I had this option was to force back to the factory settings.
  So here I am again with Windows 7.

  On the Toshiba site, I see now that my model of laptop, Satellite C850 with part No. PSKCCE is not a model of support for the update 8.1 Win. Can someone tell me why?

  It will support in the future?

  > On the Toshiba site, I see now that my model of laptop, Satellite C850 with part No. PSKCCE is not a model of support for the update 8.1 Win

  Hmm, I guess you're wrong because on the Toshiba UE driver page I could find drivers Windows 8.1 for the Satellite C850 PSKCCE
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp

  BSOD issues are really bothersome, because this can happen due to hardware malfunction or also due to problems of system or driver.
  Same 3rd party software could affect systems

  That's why it very difficult to say what might cause this problem without checks unique pieces, the pilot, and the reporting system.

• dv4-1220us: do you really need to uninstall ATI Catallyst to upgrade to win 7 of win Vista on a dv4-1220us not

  Do you really need to uninstall ATI Catallyst to upgrade to win 7 of win Vista on a dv4-1220us not

  Hello

  Normally SO but also sepending on what you are doing. This is a new installation or an upgrade. No need to uninstall both. Why you must ask this question?

  Kind regards.

• HP Envy M6: My HARD drive is not bad on my computer? I have reloaded Win 8 and upgraded to Win 8.1 but he keeps crashing

  Hi need help and answers from an expert!

  My HP Envy M6 Recenly has stopped working correctly, so I decided to recover as soon as possible.  She still had the same problems, so I decided to restore factory with recovery USB flash drive I did.  Always had the same problem happens after I rebooted 8 Win and improved to 8.1.  It would work for a few minutes and stop working I used chkdsk and it says it fixed a few problems with the drive.

  I went through the same steps another 3 times!  After each time that once I had that he would be running again after a clean reinstall.  I would like to run chkdsk and it looks like he fixed some error, but last time, it wouldn't or couldn't find some files to run and crashed.  I tried loading Acronis and tried to reinstall the backup from there but that also failed to correct the problem.  I came to the conclusion that my HD is physically wrong?

  I guess the recovery process would reformat the partitions before you reinstall so it's not a logic error (software)?  From the recovery partition, the recovery Flash disk media and recovery software acronis can fix this, I can only assume, there is a problem with the drive itself?

  Is there a way to check this?  I don't mind replacing the drive to a SSD, so this isn't a problem, but I can't seem to find a product key.  Nothing printed on the bottom.  I read somewhere that it is now integrated with the motherboard bios so can I just use the recovery media that I did on a flash drive?

  Also, I have my backup file but I could never find the location of the image my wife loaded as the photo of "lock" screen which I do not have a copy of.  I have the backup files for windows 8.1 by Acronis and according to me, a Windows backup file on a backup drive, but I was wondering if these "locked screen hidden image" would be held somewhere in these data?  It is not under the images and I have never been able to find or understand where windows keeps this image.  I used the search without success.

  Of course, this is not critical, but I hate losing this particular image.  I hope it's keep somewhere in my back upward and when restoring with a new drive hard I can reload the backup and restore.

  So I really ned knowledge step by step: my HD is bad?  How can I check without having to spend hours to reload only to fail?

  Why chkdisk does not?  Or should I simply replace HD and if so what can I use the new disk recovery media and product ID will be accessible through the motherboard?

  I intend to upgrade to win 10, but I need Win 8 loading first, then move to 8.1 then move to Win 10?  Also in the future if it crashes how can I recover to win 10? Since it is free now but will not be later.  The upgrade will allow me to make a copy (a copy) to win 10?

  A lot of questions, but please provide the fastest solution to my problems and concerns.

  Thank you in advance!

  FM Hawaii

  Hello fmhawaii ;
  
  I read your post on your PC crashing and wanted to help.

  It certainly seems that your hard drive has failed.  Some PC allows the drive to check in the BIOS: test a hard drive in the BIOS. HP® customer support

  If that confirms that the disc is bad, then you will need to replace it.

  As for activation, you are right in that, with Win8x machines, the product key is embedded in the motherboard UEFI firmware, however, the instructions in this link, show you how to recover: find product - key for Windows 8

  When you restore from recovery media, which is supposed to automatically read product key, so you will not have to enter something to activate reinstall it.  My guess is that the drive problems that prevented from happening.

  Acronis allows you to mount an image file by using a drive letter, and once you do this, you should then be able to browse through the content to find the file you want.  However, depending on what part of the logon icon changed, it might be embedded image in a Windows system file, and unless there is a separate copy of this image, it will be very difficult to recover.  IF you Google it, you might be able to find downloadable tools for disassembly of this file and subseuent extraction of this file.

  I wouldn't hurry to Win10, but if you choose to follow this path, don't forget to make a new advance Acronis backup, then you can return to a system of Win8x of work if something is wrong - as the Win10 GoBack function is known to be unreliable.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• HP ProBook 440 G2, fingerprint reader works not when I upgraded the Win 7 Pro form to win 8.1 Pro

  My HP ProBook 440 G2, finger print reader does not when I upgraded the Win 7 Pro form to win 8.1 Pro.

  Device manager showing the biometric reader works correctly. But in fact, the finger printer reader is not reading or senseing. It seems that the part "dummy". Please help me to correctly configure step by step for that matter.

  Thank you

  Hillet

  Have you installed the software driver validity sensor fingerprint for Windows 8.1?

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943811 & swItemId = ob_134806_1 & swEnvOid = 4158

  See page 64 in the manual Windows 8.1 according to the configuration of fingerprints of validity information

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=6943810 & docid = emr_na-c04371762 & docLocale = en_US