Are LR adj. lost when reinstalling LR?

Similar Questions

• features lost when reinstalling windows 7 ultimate?

  During my first installation of windows 7, he had this thing like organizing on the desktop. It has different subjects and the subjects had shortcuts to my programs. It would be like "microsoft office" and when I clicked on tiny shortcuts seems that has forged ties to Word, PowerPoint, etc. I recently had to pass on my hard drive to a new because it was a failure and I just reinstalled windows 7 and I can't get it back. I don't know what it's called, but it's kind of similar to ObjectDock if you know what it is. I was wondering if anyone knows what his name and how can I get it back? Note: it is not a gimmick.

  I ended up calling dell today because I realized other things are missing, and they helped me to find out what it was called. It is called dell dock. It is therefore useful if you haven't already you should watch it upward and install it! but thanks for trying to help me!

• Lost when reinstalling CS3 Design Premium fonts

  Due to a virus, I had to erase the hard drive of my computer. I reinstalled the software Adobe CS3 Design Premium and have noticed that I lost fonts in the process. (All the open type fonts: Adobe Jenson Pro, Porky, to name a few). I began with Adobe CS2, but did not put that on the computer with the re - install. I search in the collection of fonts from CS2 disc and can't see any missing fonts.

  Does anyone know if I did something wrong, or how to recover fonts?

  Thanks for your help,

  Cathy

  Windows XP operating system

  Eight fonts Adobe Jenson Pro family were bundled with Creative Suite 2.0, 3.0 InDesign and InCopy CS2, InDesign CS2. Was the set of included fonts: Regular, Italic, Bold, Bold Italic, Semibold, Semibold Italic, Light and Light Italic.

  If you have disks for one of these products, you should be able to find the fonts Adobe Jenson Pro here.

• Possible bug? Change the geometry on the hair, the changes are lost when the model is saved, then loaded into fuse again.  Is this a bug?

  When I save the changes to the hair using the tool change the geometry in a file .fuse on the computer.  These changes are lost when I load the model to the fuse.  Is this a bug?

  Saved to disk:

  

  Reloaded in fuse:

  

  Post edited by: Allan Chaney I've included screenshots.

  Thank you much for the details.  I tested it on Windows and Mac and reproduced.  Doesn't seem to be a bug (but not a guarantee).  I've done some characters, recorded their soft-mod-ness very well.  I connected with the engineers for more tests and we will have fixed as soon as possible!

• Value of cluster lost when you leave the structure of the case

  Hi all

  I'm having a problem with a particular VI I'm working. (FYI it's in Labview 8.0)

  The VI is set to run a current source, voltmeter and thermometer, then recording and graph the data in various ways that can be selected by the user.

  Everything seems to work fine except a particular graphic method. When I try to graph current compared to the tension, the current value is lost estates. In a case the current and voltage are combined to form a cluster, and then leave the case structure to be later appended to a table of cluster.

  However, the value of the cluster is lost when the chart is set for the voltage vs. Any other method and it works correctly.

  I can't understand why this is happening as it does not make much sense than other methods of work charts, but this one isn't when it is coded the same exact other than having the different variables.

  I have attached the VI with added indicators showing that the value of cluster is lost once he leaves the box structure. Any help would be appreciated.

  Thank you very much and I apologize for my extremely messy VI.

  -Nathan Cernetic

  You really need to boil this down to something we can run and reproduce the problem.

  Have you tried to break a few relevant connections and rewire? Something is possibly corrupt.

  Besides being a mess, your VI has quite a few glaring errors.

  Let's take a look at the structures at the top right:

  • 90% of the code is the same in all the structures of three cases, so all that needs to be inside the structure is the small part where you built the table 2D. All the rest is outside of the case.
  • The structure of the sequence has no useful function.
  • Why do you need to reverse the table with each iteration of the small loop FOR? Once before the loop would be sufficient. Right?
  • Why you use table built inside the small loop FOR, but no autoindex on the edge of the loop? All you ever get is an array containing exactly one element, no matter how the loop runs. Seems unnecessary! (see below for an alternative image).
  • You wouldn't even need to reverse if you want to use "built the table" instead of "insert into the table at position 0" in the central part.

  

  Other: You constantly hammer all nodes of your property. The only need that will be called when things change. Again, you have far too many cases. For example, in the structure of the case where you are having problems, the same nodes of property exist in all cases. A single instance of the property node belong outside the case and only the string inside each case constants. Whenever the code is the same in all cases a case structure, which code belongs to the outside!

• audio is lost when the video is imported in windows live movie maker but works when it is open in windows media player.

  audio of my video is lost when I import into windows live movie maker, but can be heard when played in media player. video is from jvc camcorder handy, file type is: MOD (video clip)

  Just because a file is played in Windows Media Player
  does not ensure that it will be compatible with the film

  Maker. Might be worth trying to convert MOD files
  before you import into Movie Maker WMV format.

  Perhaps the following links will propose a few ideas:

  Use. MOD with Windows Movie Maker files
  http://www.YouTube.com/watch?v=m31Ji4U5jWI&feature=related

  How to edit JVC. MOD files in a few easy steps
  http://www.YouTube.com/watch?v=ZY-cKaCEUJ4

  How to convert AVI files to Movie Maker MOD files
  http://www.ehow.com/how_5854160_convert-AVI-files-Movie-Maker.html

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• recover passwords to login lost when locked

  How can I recover password of connection lost when im completely locked

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• Are there special procedures when I update mode NX - OS (standalone) mode ACI of NX - 9 K?

  Hello world

  I have two questions.

  First of all, are there special procedures when I update mode NX - OS (standalone) mode ACI of NX - 9 K? For examples, NX - OS version, cards online, EPLDs, licenses and so on. And is it possible back ACI mode mode NX - OX, too?

  Secondly, I know that fabric module (below, FM) s are paired FM1 and 2, 3 and 4, 5 and 6, respectively when there are 48-Port 1 / 10 G T/F Module in the chassis. In this case, if the FM in slot 2 to lose, both links to slots 1 and 2 would be lost because the mux detects the loss of slot 2 and therefore takes traffic slot 1 also, that is, the slots are paired. If so, what are the benefits of an investment FM full? Please share your knowledge with me clear ^ ^

  All your help will be appreciated.

  Paul

  Paul,

  Sorry for the delay... Answers to your two questions.

  1. FM can go in one of the remaining slots. The line cards have Muxes them bound to each FM which is "installed" in the switch.

  2. you original question was related to the switches in the mode of the AIT.  As of today, there is limited line cards that operate in mode of the AIT.  3 FMs provide the necessary conditions for the rate of the line more most of the previously mentioned such line cards.  That said, once you install a N9K X9736PQ a minimum of 6 FMs are needed.  So if you have a failure on one FM, your BW system in the tissue deteriorates. The BW is shared across all line cards until the failed FM is replaced.

  T.

• PS CC 2015 crashed. Now get the exit code 7 When reinstalling. [was: DF024]

  My PS 2015 CC crashed today, I deleted the creative cloud together and when reinstalling PS this message was little matter what I've done

  Exit Code: 7 Please see specific errors below for troubleshooting. For example,  ERROR: DF024 ...
     -------------------------------------- Summary --------------------------------------  - 0 fatal error(s), 2 error(s)  
   ----------- Payload: Adobe Preview CC 1.0.0.0 {A3B6E381-F2E8-47CD-87B4-96B1E3FF61D3} -----------  
  ERROR: DF024: Unable to move file at "C:\Program Files (x86)\Common Files\Adobe\Installers\
  adobeTemp\{A3B6E381-F2E8-47CD-87B4-96B1E3FF61D3}\_2052_3ee4c568d0054f5b21d63d4fe818c79c" to 
  "C:\Program Files\Common Files\Adobe\Plug-Ins\CC\Generator\preview.generate\node_modules\ws\build\Release\bufferutil.node" 
  Error 32 The process cannot access the file because it is being used by another process.. 
  Try setting correct permissions to the specified file/folder or parent folder, so that admin has rights to modify it.(Seq 2053) 
  
   ----------- Payload: Adobe Photoshop CC 2015 Core 16.0.0.0 {793C2BF7-A4FE-4608-91C9-9282C5801C21} -----------  
  
  ERROR: DF024: Unable to move file at "C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\
  {793C2BF7-A4FE-4608-91C9-9282C5801C21}\_1821_b39804d28f53936006bc03a1ca161e6b" to "C:\Program Files\Adobe\Adobe Photoshop CC 2015
  \Required\DynamicLinkMediaServer\DNxHDCodec.dll" Error 32 The process cannot access the file because 
  it is being used by another process.. 
  Try setting correct permissions to the specified file/folder or parent folder, so that admin has rights to modify it.
  (Seq 830)  ------------------------------------------------------------------------------------- 
  
  the files dont exisit, and no other programs are open.
  
  
  Help please!!!

  The Adobe Creative Cloud Cleaner tool allows to solve installation problems

• Why model brushes I created are no longer available when I reopen a file?

  I work a lot with brushes of boss, but for these last months that they have not saved properly and are no longer available when I the reopening a file... is anyone else having this problem? For years, this has not occurred. I can't work or even work around him why? Any ideas?

  Brushes is saved in the file.

  When you open a different file, there are different types of brushes.

  Depending on what types of brushes, they are, they also get lost when you save to an older version.

  What exactly do you have? What types of brushes? Have you created a library? What kind of file save you?

• 1. can't connect to VMWare Server when no network 2. Comments or lost when lost network connections

  Hello

  I have two guests of computer virtual on my laptop.

  1. I can't connect to VMWare Server when there is no network.

  This means that I can not launch the guests when I'm at home (with no network) or on the road.

  2. the connections are lost when lost network.

  As a corollary to article 1 above, if I am connected to the work, and that the network is lost, my connections are lost for the guests.

  How to configure VMWare so that this doesn't happen, please?  (I inherited the setup of a colleague who has left, so I don't know how it has been implemented).

  'About' gives:

  VMware Infrastructure Web Access

  Version 2.0.0

  Generation 116487

  VMware Server

  Version 2.0.0

  Build 116503

  T.I.A.

  ALF

  Hello

  If you want to connect, try: https://127.0.0.1: 8333 or https://localhost:8333.

  BTW. You can upgrade your VMware Server to the latest version, as I see you are using the beta version.

  J.

  You can read the document undermine , Impossible to open the VMWare - Server and Remote Console-

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

  Post edited by: janlib

• hidden and included hyperlinks lost when convering eml to PDF

  We are using PDF Creator 1.4.3 and convert .eml to PDF files using the PDF Creator printer.

  We are experiencing a problem where hyperlinks hidden and included .eml files are lost when it is converted to PDF.   Is there any solution for this?

  Any help in this regard would be highly appreciated.

  Thanks in advance!

  You can contact the support of PDF Creator or use a forum for PDF Creator. It is not an Adobe product.

• Is there an 'official' list of certificates that are installed by default when you install firefox?

  Is anyone aware of the 'official' list of certificates that are installed by default when you install firefox?

  Hi JLed, Yes - please refer to https://wiki.mozilla.org/CA:IncludedCAs

• I've installed a plugin to add the tab "duplicate" to the context menu for tabs. This was lost when I stupidly updated FF4 (my bad!). I don't remember how I added this feature, which is STANDARD with IE8, FF3.6! Tab Manager disobeys.

  I had installed a plugin to add the tab "duplicate" to right-click menu for tabs. This was lost when I stupidly updated FF4 (my bad). I don't remember how I added this feature, which is STANDARD with IE8, FF3.6! Tab Manager disobeys. WHY IS - IT NOT A STANDARD CONTAINED IN FF4?

  Could this be the add-on you think:

  https://addons.Mozilla.org/en-us/Firefox/addon/duplicate-this-tab/

• Country & keyboard codes when reinstalling Qosmio Player

  When reinstalling Qosmio Player gives me a selection of countries and the keyboard codes without any explanation of what they mean.

  Is thate a list somewhere?

  Hello

  There you can change the settings for your keyboard type and country settings.
  If you're in Germany, you can select from 1.
  But I think you can use the help of the Qosmio player option.
  By pressing the F1 key, the Guide should appear.