as paso con el en el esxi converter 5?

Similar Questions

• VMWare Converter / ESXi - convert before installing ESXi?

  I need to convert a physical machine into a format that VMWare ESXi will be able to run. The problem is that I have not and can not install VMWare ESXi until this conversion is already done. VMWare converter standalone client customer has two options for the type of destination:

  • Machine virtual VMware Infrastructure (while the right choice, apparently, I can't pick it that I have not yet installed ESXi any where)

  • VMware Workstation or other virtual machines to VMware

  When I choose the second option, I can "Select VMware product", however, ESX/ESXi is not an option. One of these options will convert to a format that ESXi will be able to run once installed without additional conversion?

  I think I should choose VMware Server 1.x as I think it's running version 4, like ESXi hardware.

  The release notes for Converter 4 State that ESXi 3.5 is a goal taken in charge in the future you will be just able to select ESX for the destination and you will be fine.

  In this case, you can select the VMware Workstation or other Machine virtual VMware opton and store than the P2V would be the machine on a Windows share. You can then use again later on, converter to convert the virtual machine in ESX format.

  The user guide for the product says that it is possible and taken care of.

  If you found this helpful, please consider awarding points

• Convert from Fusion to ESXi

  Hello

  I am faced with moving images of VMware Fusion, into an ESXi environment.
  I installed the OVF tools and tried to convert the tool with the command:
  > ovftool image.vmx image.ovf
  I'm not sure this is the right command. in any case, it does not for me - I get this error:
  "Error: could not open the disc: Virtual Disk.vmdk.
  Completed with errors.
  
  
  My OS is obviously Mac OS X. VMware Fusion 5.0.1. OVF tool 3.0.1

  If VMware tells you to use OVF - so who am I to argue against that?

  Personally, I think the OVF is a tool very stupid - it simplifies to the extreme the vmx file you have and writes the result to an xml file.
  Several details of your virtual machine get lost there.
  Then it converts your vmdk existing in a format that can not be used natively by ESXi.

  Subsequently the ESXi convert vmdk must be imported / converted a second time.
  The ovf file is then interpreted another time and with a little luck the ESXi knows how to make a vmx of it...

  You can get results more reliable if you download the vmx directly with the vmdk - then you only need to convert vmdk format once.
  Most of the time that the vmx needs no change at all - it really is not necessary to torture your innocent VM with OVF tool

• Como leer USB desde virtual machine in VMWARE ESXi 4.0?

  A cordial Saludo a todos.

  Tengo wont in a server the Vmware ESXi 4.0 platform, sober cual tengo una virtual machine en Windows Server 2003.

  Necesito UN por favor me indicandome como debo hacer para leer desde the virtual USB devices help machine Win. Server 2003.

  Desde el client Vsphere, ingreso a virtual machine of the Delcourt config, there are added el driver USB (ver imagen adjunta), pero ahun sigue sin funcionarme.

  Quedo muy atento a sus comentarios.

  Saludos.

  Para aquellos con VMWare ESXi 4.0 Estos his los comandos para fornuis 4.1, the gran novedad 4.1 are el soporte para Máquinas Office USB.
   
  De el addition of VMware ESXi en el sitio of mailing package. :

  http://downloads.VMware.com/d/info/datacenter_downloads/vmware_vsphere_hypervisor_esxi/4
   
  ESXi 4.1 (change ZIP ESXi 4.0)

  The ultima version available

  A1 knew servidor con VMware vSphere client ESXi.
  Apague (poweroff) todas las maquinas office desde el servidor.
   
  Haga click derecho sober el arbol y poner ESXi a mantenimiento modo.

  UNA vez hecho esto, vaya has the config of VMware vSphere data of the client - datos almacen - almacen click on database "sober" derecho y push-button.
   
  Tenga into account that el anterior are 'SUFFER', haga click en el y luego undergo. Archivo zip en el almacen of data.
   
  El siguiente paso are al por Existing VMWare Server access.

  If ssh without esta en VMWARE habilitada, siga los pasos following in her console server:

  ALT + F1 para as aparezca algo in the pantalla, escriba "sin soporte.

  the root contrasena ingresar

  VI / etc / inetd.conf

  descomentar the line that contains parameters of the SSH los y el archivo save.

  REINICIAR el servidor.

  Ready, con el servidor enable Existing through SSH.

  Comprobacion del archivo:

  esxupdate - package = / vmfs/volumes/datastoreI/upgrade-from-ESXi4.0-to-4.1.0-0.0.260247-release.zipcheck

  If "Check OK", run the change:

  esxupdate - package = / technical vmfs/volumes/datastoreI/upgrade-from-ESXi4.0-to-4.1.0-0.0.260247-release.zip

  NOTE: este 'almacen of datos' are el number of su almacen of datos e caso, I can change number, entonces uno el

  LS / vmfs / Volumes /.

  Y ver el number that in su almacen of datos esta.

  Once completed the change, el servidor is reiniciara, por lo that connect acaba con el client of VMware vSphere, quitar el mantenimiento modo y las maquinas office.

  Important note:

  Run USB, las maquinas office debe ser version para el 7 y add el driver USB en the virtual machine if is is in version 4, the fuera Máquina virtual con simplemente haga click derecho in the part superior su version 7 of change.

• Brain status anomalía ESXi

  Hello to all,

  I like turned out one chiarimento in Re has delle anomaly che rilevo nei brain contenuti nei miei host vmware (ESXi version 4.1/5.1).

  Accedendo del mio e of vSphere ESXi interfaccia con andando nella sezione Configuration-> health status (vedi sotto immagine) ho noticed che he sensore dei brain mi marked it following problema per tutti i presenti nella macchina brain:

  Disc or disk drive Bay 1 1 0: Drive Fault - Deassert

  Disc or disk drive Bay 1 1 0: Predictive Failure - Deassert

  Disk or disk Bay 1 1 drive 0: critical table - Deassert

  Disc or disk drive Bay 1 1 0: table failed - Deassert

  Disc or disk drive Bay 1 1 0: rebuild underway - Deassert

  Lo status dei brain in normal (vedi sotto immagine) e e tutti i brain works correctly (nel RAID not this sound system disk in failure).

  Ho noticed anomalía in different host, material con questa e versioni ESXi different.

  

  E' possibile avere a chiarimento in re al problema just esposto?

  Grazie

  Ciao,.

  Dall hai postato, che interfaccia di health ti vedo che sta dicendo che NON hai problemi.

  Tramite quell'interfaccia vedi tutti i sensory che he CIM del tuo Server ti e mostra he loro e quello che vedi status ' da interpretarsi come:

  "di sensore he Failed Array by it drive bay drive 1 1 e' ok ' ossia non e' didn't.

  I have sensory che vedi are dal Comptroller che stai using e dai caricati provider: case cerca I provider date by I vari host nei siti del Winery.

  Giuseppe

  --

  Giuseppe Guglielmetti

  2014/1/11 rbertolini [email protected]<>[email protected]>

  Https://communities.vmware.com/index.jspaVMware communities >

  Brain status anomalía ESXi

  created by rbertolinihttps://communities.vmware.com/people/rbertolini> in Italy area VMware User Group - discovers the discussion completehttps://communities.vmware.com/message/2333151#2333151>

• Problema con el HA of Vsphere 5.1 (Las MV no vuelven a host known)

  Hola, tengo a small problem that no puedo did. Results that we are doing the tests con back 5.1 ESXi host (838463) in los which back vswitch, uno ambos tienen para management y VM y el otro para the conexion con el NFS resources. Editor os envio a como estan configurados organigrama pequeno.

  We have a physical server con el Vcenter 5.1.0 (947673) con a cluster HA of 7 mv. Host1 El the da vm1 of las mv, vm2, vm3 recursos y vm4. Vm5 El HOST2 tiene las vm, vm6 vm7. The config led Admission Control disabled esta el el host2 is no tengo suficientes don't slot free para soportar todas las mv.

  El caso are cuando forzamos a Quebec falle el HOST1 el HA works y levanta las mv vm1, vm2, vm3 y en el HOST2 vm4. El problema viene cuando el HOST1 vuelve a estar in linea are maquinas is intentan levantar el HOST1 pero finalmente en no lo towers there is only HOST2 en el.

  Perhaps hemos pensado than could por ser a tema of lack of resources available for pero hemos s las premium the tests has the reversed y compares lo mismo, cuando no hay is levantan el otro pero a fallo en UN hosts in las mv no vuelven was able to host original cuando esta este is running.

  ¿Sabriais fits porque esto happens?

  MUCHAS gracias.

  Hello that tal.

  The main function of HA are precisely levantar las MV del caido in one of the hosts remaining led host cluster.  Cuando el that host fallo vuelve a las operating system of estar, lo of normal than MVs don't automatically vuelvan a host said, a menos that las muevas con manualmente vMotion, DRS made o para balancear carga between los hosts led Cluster.

  ASI're como HA, las MV works no volveran a su original host a less than tengas DRS.

  Saludos,

• Backup ESXi 4.0

  Is,

  Estoy varios ESXi 4.0 host implementado y estoy evaluando mejor manera hacer backup las VMS, en lo puedo hacer princio're apagarla y copy los VMDK o well if lo quiero en caliente tomo UN instant y performed the same copia. El tema esto are lo tengo do yo a mano, no lo puedo programar, brought instant tomar relalizar e even VM ware vSphere CLI pero por las encender a tema of license no puedo hacer nada, consultar solo if esta burning o simplemente apagada.  Buscando information meeting los backup VCB pero tiendo Québec por no usar con is you can ESXi.

  Me gustaria conocer como ustedes en los ESXi 4.0 backup alternative

  Desde el tiempo por leer mi message thank is.

  A gran Saludo!

  Martin Morana

  Hola

  Yo tenia el mismo problema y una pero respond there manual eligibility.

  1-. Form el .vmx the Máquina quieres hacer copia al destino

  2 - snapshot Realizas UN

  3 - form todos los ficheros instant deltas del los menos y el .vmx al destino

  4. - instant the origen Máquina el Borras.

  Puedes crear a script that is run in el esxi (a console through the unsopported) y you realice las actions... pero para mi the mejor forma fue una buena documents step by step y manualmente realize el backup.

  Saludos

  If upon esta u otras answer useful, por favor considered el puntos seleccionando respuesta correcta o util como asignar

  If you find this or any other answer useful please consider giving points by checking the answer useful or appropriate.

• ESXi and Virtual Center

  Hello

  I am currently running esx 3.5 and VC 2.5.

  I have a lot of spare equipment (thanks to VMware ) and had the idea to install esxi use local storage on some of them and use them for testing.

  (1) can import these boxes esxi in my esx virtual center server to manage (is not part of my clusters) and no intendion HA DRS Vmotion etc and therefore still free licience or do I need a licience esxi VC?

  (2) what I could use to migrate mailboxes to existing test of esx with SAN to my local storage under esxi, converter Enterprise Edition or just simply copy and paste on the network?

  Thanks in advance

  Joe

  Don't forget to backup EVERYTHING before you change anything

  (1) manage ESXi boxes requires additional licenses for VC agent on them, you can't do this with the free version.

  (2) converter would be the simplest solution (Standalone v4 is now available, for free, no more distinction between free/enterprise)

• Sober nuevas LENOVO ALL IN ONE Verciones...

  Quiero comprar una pc ALL IN ONE, depronto the C325, the pregunta

  Ahora con el lanzamiento Windows 8 WHICH SALDRAN?

  EL MISMO C325 saldra con windows 8? o saldra otro modelo 2013

  Hola pixelway,

  Yet Lenovo no ha anunciado as pasos con who will take the introduction of windows 8, no hay certeza that este sistema saldra con windows 8. Lo mejor are expect hasta el lanzamiento,'re in unos Días, y ver.

• Consideraciones al hacer a Cluster

  Amigos Buenos dias, I have some concerns estoy instalar finished a Vcenter 5.1 there are shouts cluster of United Nations later datacenter para crear el, pero tengo las I need which concerns a poco Orientación, mi stage son real back servidores IBM 3690 X 5 con una ESXI license essential VMware more. estan por traerme una SAN DELL pero deseo ir creando al Cluster segun lo that he read estas would be las configs ideal mas para crear mi cluster:

  -enable HA

  -enable followed host

  - Disable: allow VM power on operations that violate constraints of availability

  -Enable el VCA para los procesadores

  Tengo una duda con respecto a los ESXI uno, uno ellos tiene currently unas 6 maquinas office en production al hacer el cluster esto afectaria a las estan in production?

  sldss

  Hola,

  Puedes crear el cluster hosts sin, con UN, con los back, como lo desees host. No have any, puedes hacerlo tranquilo problema. Remember el cluster como configurar has said, con HA, host, monitoring, control VCA y el Admission.

  A greeting.

• ColdClone

  UNA pregunta,

  Creo that esta respondida, pero not the encuentro, :-D

  To donde me bajo el coldclone? in las descargas no lo encuentro y Necesito hacer una imagen UN Redhat UN y solo to me compares ese metodo.

  Gracias!

  Hola tocayo:

  Abajo in the foot of the page in el apartado support choose the option downloads & Patches. Busca con después el text converter boot cd, apareceran several options, choose the 3.0.3. Cuando elijas descarga aparecera a .exe are el instalador y UN .zip are el creador del boot CD.

  A greeting.

• Run 64-bit VM 7 Workstation in ESX 4 VM

  I've been scratching my head for the past few hours to see if it was possible to run VMware workstation within an ESX 4 VM. Our desktop deployment team wants to create their basic images to deploy outside (as Ghost) within the server that is virtualized. So far, I found the guide to enable vmware workstation in a machine virtual esx - http://communities.vmware.com/docs/DOC-8970

  Are there tricks to allow 64-bit workstation vms in this scenario?

  I also noticed that if you run a CPU checker, it reports that the CPU is not VT enabled inside the virtual machine, but the external host is enabled. ESX removes access VT of the guest OS? I'm sure we can come to a workaround, but I'm just curious of my knowledge... Thank you!

  Lance

  Simply create your golden VM image directly into a virtual ESX (i) machine. You can use vCenter converter 4.2 to convert the VM ESXi virtual Workstation machine, if necessary. The project I support is likely going to go that route... master VM on ESXi, convert VM Workstation, then capture/deploy with SmartDeploy.

• Copy files of UN USB has a data store

  Nuevo gran duda:

  Tengo una en UN USB VM.

  Traspasar VM one esa wants a virtual mi infrastructure data store.

  Quiero el Connect USB a host UN y hacer copia her al DataStore as pertoque.

  How should hacerlo? El etectara El ESX USB? Home will be necessary reiniciar el?

  Saludos.

  Xavier

  VCP4 and professional VCP3 certified VMware.

  -

  ---

  If upon that esta o any other campaign respuesta ha sido utility, votalas. Gracias.

  If you find this or any other information useful or appropriate, please consider giving points. Thank you.

  Buenas

  Simplemente al pinchar UN disco usb, esx el lo's a ver como/dev/sdX, con lo you is montarlo y cease knew contenido al/vmfs/volumes/datastore

  Said you lo del porque luego converter you tocara con trastear el vmkfstools para convert el do disco al formato thick thin o use you esx porque no admite el formato del disco server.

  If esta u otra respuesta're util, por favor su marca used notificador.

  Gracias / looks

• Problema Storage VMotion

  Hola,

  He tenido a problema con el storage vmotion is the virtual machine will ha been parada y sin poder arrancar. Error of El ha sido el siguiente:

  An error general system: Storage VMotion: consolidate online in case of failure: a necessary file was not found. Must manually consolidate the records of the child.

  That means melting manualmente estos discos? Como puedo hacerlo?

  Data store El donde tengo maquina ha been, cada uno los discos, con a fichero delta, como cuando haces UN snapshot. Supongo lo usa durante el proceso del SVMotion y como no ha terminado correctamente to han been alli.

  Someone can help me?

  Buenas Masill

  Svmotion El you crea durante el proceso una 'snapshot especial' in los discos mover HA there're the what ha been enganchada al fallar el proceso, instant estas tienen nomenclatura-dmotion < disco > hard

  If miras el directory of the Máquina deberias ver algo como esto:

  Maquinita - flat hard

  Maquinita.VMDK

  Dmotion - scsi0:00_Maquinita.vmkd

  Dmotion - scsi0:00_Maquinita - delta.vmdk

  Lo primero antes of nada, if you can, haz una copia of you virtual Máquina para as tengas a seguro in case of disaster

  Luego brought melting las snapshots utilizando el comando vmkfstools para building UN fichero con hard snapshot is established of este modo nuevo: vmkfstools-i < del fichero snapshot number > < Nuevo fichero >

  Pejplo: vmkfstools-i dmotion - scsi0:00_Maquinita.vmdk /vmfs/volumes/LUN1/RecuMaquinita/maquinita_disco1.vmdk

  Boring este paso con cada Georgia disco.

  UNA vez are tengas todos los discos consolidados, anadelos has the virtual machine sustituyendo a los 'cascados' e brought the Máquina arrancar.

  Espero you ayude

  Saludes.

• Question about joining and separating some simple traces

  Hello, I have a vector image of a logo and here to recreate the 'e' appearing in the image here without the missing gap, where a picture point used to be.  I'm fairly inexperienced in Illustrator and seeks advice on the best way to associate this zone in the most simple way and smoother appearance possible.

  Further, since I will use this to get an effect of masking in Flash, I would like to know how I can separate the areas of intersection on the left side of the "e", so it appears as a worm - like single line/swoosh.

  Thanks for any advice.

  -Courtney

  

  Courtney,

  Assuming that there is no question pending of the copyright, you can:

  (1) cut each of the anchors away with the scissors tool.

  (2) join each part of the path by dragging on the Anchor Points to attach with the direct Selection tool and CTRL / Cmd + J, now you straght join parts with corner at both ends Points;

  (3) ClickDrag every Coner Point with the tool convert point of anchor (the pen tool launcher) to get the right curves, it may take a few tries until you get them right.

  You can cut the tail where it joins the back of the e with the scissors tool. (you can repeat 2) and 3) If you want to join the pieces with curves.

  Always work on a copy when you destroy work.