as the program installation using vmware

Similar Questions

• Error message: windows\system32\difxapi32.dll isn't is either not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for

  Hello

  I keep getting error messages when I use the computer. It started two days after you download an update from Windows. A sample of the error is:

  C:\windows\system32\difxapi32.dll is not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  I use a vista. I don't know how to solve this problem, many want to help.

  Thank you.

  Hi Colinthebrave:

  Start with this little tool to help get rid of the error, once your system is stable again and then try to run your updates again.

  Thank you for your message; Let us know how it goes.

  o

  o The System Restore tool

  If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose another restore point and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Don
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: _ "Sidebar.exe - bad image"__windows/system32/sfc.dll is not designed to run on windows or it contains and error. " Try to install the program by using the original installation media or contact your system administrator. __

  Help, please!
  I started my computer today and it came with this error:

  "sidebar.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click on OK, then he said:

  "Acrotray.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click OK and then it says:

  "hpqtra08.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  Also I got an error report saying that windows sidebar stopped working.

  My computer is VERY slow in all the commands I give.
  I also tried to run the sfc (System File Checker command) and acts like he is going to run the program, but then just closed.

  Do you have an idea what is happening with my computer and what I can do to fix this?

  Thank you very much!

  Hi deacon829,

  You did changes to the computer before that happened?

  Step 1: Start the computer in safe mode and check if the problem persists, to do this, follow the steps below,

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: If you try to install any application before this program, try to uninstall them.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  If this solves the problem, you can deduct that the demand is probably corrupted, damaged or incompatible. You can check with the manufacturer of the program for more information.

  Step 3: System Restore: System Restore to put the computer's system files to an earlier point in time.

  Look for steps to restore of the system in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  If the problem persists,

  Step 4: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How tio changes the programs installation directory, I want to install?

  How tio changes the programs installation directory, I want to install? I'm trying to install a lot of programs is always installed in "Local disk C" that low memory space. Please tell me how can I install the programs in other folders such as "Local disk D and E and F. And also please tell me that the directory in which the widows is installed when reached about his memory limit, does windows performance issues.

  Win needs 15% free space for proper operation.

  Using various hacks registry posted on various sites to redirect the default program installation folder to another drive is not supported by MS and can cause problems.

  Most of the programs when you install them have the option for a custom install, where you can specify where / which drive to install, but not all programs have this option. Even if you install a separate drive various files/folders will be written on victory drive.

  If the drives D, E & F are separate partitions of a disk, you will need to modify/extend partition in win

• He said that the program I use is no longer supported. What should I do?

  I am trying to download the trail for photoshop, and it won't let me download it because it says that the program I use is not more taken in charge. Ive tried to get good upgrade download, but cannot find anything. What should I do?

  I don't think the current version works

  Minimum requirements for programs of cloud... scroll down and check each program

  -http://helpx.adobe.com/creative-cloud/system-requirements.html

  The only version that might work is CS6, and is going on 4 years and is no longer updated

  Link to buy the CS6 via phone http://www.adobe.com/products/cs6.html read all the way down

• I bought the upgrade to lightroom from Adobe site 6, regularly paid with credit card, receive e-mail of confirmation of payment and the serial number, just start the program installation insert the serial number provided to me by email and I get this wa

  Bought @I upgraded lightroom to Adobe site 6, regularly paid with credit card, receipt of payment confirmation e-mail and serial number, just start the program installation insert the serial number provided to me by email and I get this warning: COULD NOT VALIDATE THIS serial NUMBER for LIGHTROOM CALL SERVICE since the upgrade I paid I might have a valid serial number thanks

  Have you contacted service the customer the message instructed? Generally, we cannot help with password issues in this forum.

• Problem uninstalling the program "installation source for this product is not available. Verify that the source exists and that you can access.

  OK, Windows Vista. Try to uninstall unused programs, (SimsLife) and met with the message: "the installation source for this product is not available.  Verify that the source exists and that you can access.  I'm trying to UNINSTALL a product that exists. How to find the source in order to uninstall the program?

  Hello

  Sometimes when you uninstall programs it may be other applications of the dependent files.  Some programs will leave them behind and others will take all during the uninstallation.

  Troubleshoot installing or uninstalling programs

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

  Download the free version of CCleaner and use the uninstaller to uninstall the application

  http://www.Piriform.com/ccleaner/download

• The duplicate files. Same file appears in different directories - how to identify the programs that use these files?

  Hello

  Question 1 - I have a list of duplicate on my computer files. Very often, the same file appears in two or more different locations. So I guess this could mean different copies of the same file is used by various programs. It would then be important to know what program is using this file prior to the removal of duplicates.

  Question 2 - it would be possible to point all programs that use a file given in one place? That is to centralize the location of a file. What I think, could eliminate the need to have different copies at different locations. If so, how is it please?

  Thank you for your help.

  The duplication that you see is the result of a bad installation program written by eSupport. It has nothing to do with Microsoft. I could do this:

  1. Rename the folder c:\eSupport in eSupport.junk
  2. Wait a week or two.
  3. If all goes well, remove the renamed folder.

• Connect two VMs via the connection to the local network using VMWare Player

  So this topic can be posted already, but I'm at the end of the roll, trying to find a solution. I have VMWare player installed 3.1.4 on an enterprise_x64 of Windows 7 system. I configured two virtual machines: OS1 comments: Red Hat Enterprise Linux Server 5.5_x64 and OS2 comments: WIndows 7 Ultimate_x64. I need the Linux server to act as a database server in the system environment, that I am creating. The Windows 7 VM will be the client PC. The Linux server is configured to be it's own DHCP server, so ideally the client PC connects to the field of tht and also follow the Linux server IP address.

  I tried all the options of networkign for each virtual computer, but no sem to create this type of connectivity. How to configure the network settings in VMWare Player to make two virtual computers can communicate with each other via a virtual network? (Communication with the host pc is not necessary)

  The short answer is to manually install the lack vmnetcfg.exe, Editor of virtual networkand configure VMnet2 without DHCP and host vNIC and then configure manually each virtual machine network adapter to use Custom VMnet2.

  The longer answer has already been given so many times that you should be able to find detailed directions, however...

  To install the lack vmnetcfg.exe, virtual network editor, run VMware-player-* .exe-e c:\vmptmp go to a command line and then in the c:\vmptmp folder, locate the file c:\vmptmp\network.cab and extract (double-click on the .cab file) vmnetcfg.exe (virtual network editor) file in the working directory of VMware Player usually ' C:\Program Files\VMware/VMware Player ' you can create a shortcut to it and place it with the shortcut of VMware Player if you want to access more easily to her.  This utility is not installed by default is however necessary to turn off the automatic bypass on VMnet0 if the system is multihomed and two or more physical host from the NETWORK adapter is active or you want change VMnet1 and VMnet8 subnet addresses or additional VMnets.

  The you must manually change the configuration of each virtual machine's .vmx file in Notepad, change an existing parameter and add another.

  Change:

  ethernet0.connectionType = "nat"
  

  TO:

  ethernet0.connectionType = "custom"
  

  Add:

  ethernet0.vnet = "VMnet2"
  

  Note: Regardless of connectionType ethernet (n) shows it should be changed to "custom".

  Be sure also to Machine virtual are stop, not suspended and VMware Player is closed when you edit the .vmx config files.

  Here are some pictures to show.

  Here in the VMnet2 virtual network Editor is selected and is how it should be if you what to use your own DHCP server and the host does not have a vNIC.  You can change the IP address as a result of your needs.

  

  Here's the value VM card network NAT settings.

  

  This is what network settings Virtual Machine map will look like after you change the configuration of the Virtual Machine's .vmx file to use Custom VMnet2.

  

  BTW if you replace the Machine network card virtual settings through the user interface customized by something else then you will need to manually edit the .vmx config file to retrieve.   With VMware Workstation, you do not need to manually install the virtual network editor and should not manually edit the .vmx config file as the custom list box is still present and shows all VMnets to select from.

• (Beginner) of the initial steps for the new installation of vmware workstation & guest os

  Hi, very new for the virtual machine. I need help on what type of software (vmware), need and the first steps of the installation.

  Current configuration: a portable 3 separate HD, 1 computer = Windows 7, 2 = XP, 3 is Linux RH. I have manually swap HD to work on each operating system.

  Req: A laptop with Windows 7 as main OS and two other OS (XP and Linux) Guest.

  (1) I prefer not to install OS and the entire application again for the guest operating system (XP and linux), will like to convert, copy, etc.

  (2) can I install multiple OS (XP) for testing of applications and then delete them?

  (3) can I use a different version of an application in a guest operating system?

  The software that I need to buy:

  VMware workstation 7.1

  Version of the converted VMware?  (this may be free, I think)

  ThinApp 4. ???

  If these are vmware software that I need is a step by step installation, in particular of the convert.

  Thank you, ralph

  Hi Raoul,.

  Welcome to the forums.

  VMware vCenter Converter Standalone is a free download that is accessible to everyone, so you can use it to convert your existing machines.

  For testing purposes, you can create a virtual machine "or" with all standard applications, and then use the function 'linked-clone"of the workstation. In this way, you can have several machines quickly with the same basic configuration to test different applications.

  It is more complicated to have multiple versions of the same application in a single virtual machine. ThinApp seems to be the solution, but it should require the application packages (I have no experience with ThinApp) construction. It's a bit complicated just to test. Way the easiest would be to create a new virtual machine for each version of the application.

  Workstation and the converter are very easy to install if you use a standard configuration.

  Good luck.

  Concerning

  Franck

• Maskme has been removed. Why? It was the program is useful that I needed

  I use an add-on called Maskme that tells the fake addresses linked to the actual e-mail. When you want to stop the spam that result, all he has to do is block the e-mail. Mozilla recommends another program which is a program of password and not what I use and it does not hide emails.

  That's happened? A good bit add on which I used a lot.

  If it cannot be restored, I'll finally have to return to another browser, reluctantly, because it's one of the programs that I use a lot, as well as one that uses activeX (which only works on Explorer). It seems that Mozilla is decreasing gently my choice!

  Look at the first entry on this search page;

  https://addons.Mozilla.org/en-us/Firefox/search/?q=Maskme

• I did a system restore and boot has changed. The only program that I can open is all the others, that I wonder select the program to use to open with Explorer. What should I do?

  It is no longer a row of icons at the bottom right, and asked me to choose a program to use to open files

  Hello and welcome to Microsoft Answers. It seems that your computer is infected with malware. The first thing you need to do is re - associate your executable files with applications.

  First

  Click Start > run > type cmd in the Run dialog box, and then press ok. On the line of command prompt type "assoc.exe = exefile" without the quotes. If you are unable to open the applications follow the second below.

  Second

  Right click on start > search. Type rundll32.exe in the field of the files to be searched. Choose to search for your main drive (usually C). Select the search hidden files and folder advanced features. Click on the search button to start the search. In the results list, find the associated rundll32 file C:\WINDOWS\ServicePackFiles\i386. Right-click on rundll32 to the left of the directory above and choose 'open file location '. The rundll32.exe file should be highlighted when the folder opens. Right-click on the file and choose copy. Then, in the search results list, right-click on rundll32 which corresponds to C\Windows\system32\rundll32.exe and choose "open file location". Again the file should be highlighted. Right-click on the file and choose Remove. Right click again in a free space in the folder and choose Paste. If this does not resolve your problem, you will need to get a windows OS disk and extract the file from there.

  Once this problem is solved, you will need to perform several anti-malware analysis. You should start with Malwarebytes. Make sure that you update the parser before the scan.

  Malwarebytes.org

  How to use Malwarebytes

• system error message uninstall lavasoft ad-aware 2008 - the program is using 50% CPU allmost

  someone please help, I am trying to uninstall lavasoft ad-aware 2008 and the next goes to show on the screen, system error has occurred. Description.could not connect to the service, you are running this application as another user. application ends, the program uses allmost 50% CPU please help

  Hello nigelrichardson,

  Check the information of Lavasoft on error 1814.

  http://www.lavasoft.com/mylavasoft/support/FAQs/how-to-resolve-AdAware-2008-high-CPU-issue-or-system-error-1814

  This will help you solve your problem.

  Thank you

  Marilyn

• The program I use is called Defraggler is a simplified version of windows Disk Defragmenter. It is not defragment my disk correctly. It is said that it has completed the defrag but it's still 23% defragmented files defragmentation

  The program that I use is called Defraggler, it was created by piriform LTD and it is a simplified version of windows Disk Defragmenter. It is not defragment my disk correctly. It is said that it has completed the defrag but it's still 23% defragmented files defragmentation. I pressed defrag again and again but he still took no action and said always full defragmentation when clearly there is no. I myself had a look at the options and settings and it should properly according to them. Any help will be kind of you. Thank you.

  http://Forum.Piriform.com/index.php?s=6f56df458b93b49ff84c76f6fcd13a05&ShowForum=19

  Kindly repost of Piriform Defraggler forums for help with their programs.

  http://docs.Piriform.com/Defraggler

  And read the Defraggler troubleshooting, info etc. at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.SnapFiles.com/reviews/Auslogics-Disk-Defrag/adiskdefrag.html

  You might try the Disk Defrag at the link above instead of Defraggler.

  See you soon.

  Mick Murphy - Microsoft partner

• ORACLE_UNQNAME undefined for the Oracle installation using a silent mode

  Hello Oracle Experts,
  
  I am trying to install the version of 11 g R2 to oracle using silent mode on RHEL 5.4 X 86 64-bit.
  
  I followed the instructions in this link (to save the answer file as "db_cfg.rsp" of the Oracle installation by GUI method.)
  http://download.Oracle.com/docs/CD/E11882_01/install.112/e10840/app_nonint.htm#BABFEECI
  
  . / runInstaller-silent - noconfig responsefile - /home/oracle/Downloads/database/response/db_cfg.rsp
  
  No editing change on these files in the folder response: (dbca.rsp, db_install.rsp, netca.rsp) which was created from the runInstaller
  
  Successful ran the lsnrctl status shown below:
  -------------------------------------------------------------------------------------------
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = HA - DB1)(PORT=1521)))
  Summary of services...
  Service 'HADB1' has 1 instance (s).
  'HADB1' instance, State LOAN, has 1 operation for this service...
  Service 'HADB1XDB' has 1 instance (s).
  'HADB1' instance, State LOAN, has 1 operation for this service...
  The command completed successfully
  -------------------------------------------------------------------------------------------
  
  The '.bash_profile' file has
  ORACLE_SID = HADB1
  ORACLE_UNQNAME = HADB1
  
  The file "oratab" has
  HADB1:/U01/app/Oracle/product/11.2.0/Db_1:Y
  
  But I was not able to launch the Enterprise Manager 11 g Web GUI.
  1st,
  [root@HA-DB1 bin] #. / emctl status dbconsole
  ORACLE_UNQNAME environment variable not defined. Please install ORACLE_UNQNAME in unique name of database.
  
  2nd,
  [root@HA-DB1 bin] # export ORACLE_UNQNAME = HADB1 (ALSO tried orcl1)
  similar to the file name dbca.rsp which has DB_UNIQUE_NAME = "orcl11g.us.oracle.com" for the ADDINSTANCE and DELETEINSTANCE tests.
  
  I also found that the (INSTANCENAME = "orcl1" in section ADDINSTANCE) is the other (INSTANCENAME = "orcl11g" in section DELETEINSTANCE) the dbca.rsp file.
  
  3rd,
  [root@HA-DB1 bin] #. / emctl status dbconsole
  OC4J Configuration problem. /U01/app/Oracle/product/11.2.0/Db_1/OC4J/J2EE/OC4J_DBConsole_HA-DB1_HADB1 not found.
  
  Thanks for your help.
  HY

  Salvation;

  root@HA-db1 bin] #. / emctl status dbconsole

  OC4J Configuration problem. /U01/app/Oracle/product/11.2.0/Db_1/OC4J/J2EE/OC4J_DBConsole_HA-DB1_HADB1 not found

  This error please try the command below:

  . / emca - dbcontrol db config< it="" will="" ask="" u="" some="" question="" liks="" sys="" user="" pass,="" lsnr="" port="" etc.="" please="" give="" correct="" value="" and="" retest="">

  Respect of
  HELIOS