Error message on the printer

Similar Questions

• I just bought a dell 2335dn MFP printer. I'm trying to run a my network. I get an error message on the printer saying "initialization"?

  just bought a dell 2335dn MFP printer. I'm trying to run a my network. I get an error message on the printer saying "initialization"?

  Seams to me you should seek support from Dell.
  Have you installed according to the instructions of Dell or did you just connect to the top and hope?

• Cannot print and get an error message from the printer saying to close the scanner cover

  Original title: I can't seem to print on my Epson Workforce 845.

  I can't print from my computer running Windows 7 Home. I get an error message from the printer telling me to close the scanner cover. I can print without problem of my computer running Windows 7 Enterprise.

  Hello

  (1) is your computer connected to a network?

  (2) did you of recent changes to the computer before the show?

  (3) what is the exact error message?

  You can run the troubleshooter printer on the computer that faces the question and check if it solves.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can also consult the following articles and check if it helps to solve the problem.

  Printer in Windows problems: http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Install a printer: http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  For any further assistance, I'd contact Epson printer manufacture support.

  Here is the link: http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=184583&infoType=overview

• SE error message saying the printer cannot communicate with the computer cause of blocked files.

  Original title: DRIVER of PRINTER BLOCKED

  A COMMS. ERROR MESSAGE ME SAYING THAT MY PRINTER CANNOT COMMUNICATE WITH MY PC. AFTER COMPLETING THE USUAL HARDWARE CHECKS THAT I USED THE SERVICE CENTER OF DELL ONLINE THAT REMOVAL OF TWO STATES ' DLEACOMS. EXE' AND ' DLEAWBGW. EXE ' MUST BE RELEASED TO ALLOW MY PRINTER TO WORK.

  I SEE NO REFERENCE TO THESE FILES IN THE WINDOWS FIREWALL AND TO THIS DAY THE ONLY WAY AROUND THIS PROBLEM IS TO REMOVE THE PRINTER AND REINSTALL, BUT IT WORKS FOR A SHORT PERIOD. I USED (BY REMOTE CONTROL) THE STATION OF SOLUTION DELL THREE TIMES BUT EVEN THEY EVENTUALLY REMOVE ALL AND REINSTALL THE PRINTER.

  SOMEONE HAS AN IDEA HOW THESE FILES CAN BE UNLOCKED?

  I suggest to disable CAPS LOCK key since your message is all in the capital and difficult to read. Have you tried to add to the exception in the Windows Firewall? Try also to change your network connection for work or at home instead of public. Also make sure you installed the latest version of the driver and are compatible. Also try to run the tool:

  http://support.Microsoft.com/mats/printing_problems/

  If the problem is not resolved, contact Dell customer service.

• My operating system is Windows XP Home Service Pack 3. In the process of printing two jobs, first filled, but second one hung up. Error message was the print spooler does not.

  I followed the suggestion to use start > Control Panel > administration tool > services > print spooler > properties.

  System in automatic mode but State of the said service stopped.

  I get error 1075: the dependency service does not exist or has been marked for deletion.

  Printer worked this AM, but stopped working between two print jobs.

  I used Mr. Fixit to diagnose and fix the problem. Mr. Fixit indicates the print spooler service is not running, but cannot fix it.

  Is there a source code for Windows XP service pack 3 which can be downloaded to replace the corrupted code?

  Thanks for your help

  Curry:

  I have followed your suggestion after that someone else provided the steps for me to do the program accept net start spooler.

  The error message was THAT SYSTEM ERROR 1075 has occurred.

  The dependency service does not exist or has been marked for deletion.

  If I need to reload the operating system, I have a back up saved on a hard drive.

  Do you know what file (s?) needs to be recharged?

  Thanks for your help.

• Error message when the printer - new message, old printer connection

  Hey, Dell forums. Me am a little a problem and, well, I have no idea how to solve this problem. I hope someone can help me.

  Technical care first of all: the computer in question is an IBM Thinkpad R51 laptop running Windows XP Professional SP 3. The printer is a Dell all-in - One 926. They were also well used together for a long time and never had a problem until now.

  A month ago, we bought an ereader. When I plugged it in, I got an error message. I thought, until I plugged in again and received the same message. I was going to just deal - until I tried to use my printer and got the exact same error message. At this time, I restored my computer to until I installed the ereader. I plugged the printer back in once it has been done and does not see a problem, so I thought it was fixed.

  Today, I reconnected my printer. I had some problems with it - he was constantly printing quality rough and then kept insisting there were bands on the cartridge, but I have not tried to print something with her since then plug it in to check the error message - and I wanted to see if she would print. As soon as it is plugged in, the error message there. He is come twice, in quick succession - I hit Cancel and other pops up immediately and I hit Cancel again, that the first time through this message and the ereader has shown me that it was the only way to stop.

  It comes in I got the error message: Application popup: Windows - disc no.: Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

  Scanned, printed and another image scanned into the computer very well after that. I can't restore before you reinstall the ereader - this point was erased by the computer, creating automatic points. Whatever it is, it seems does not solve the problem. It was the same usb port that I always use to plug in the printer, and I did the same as I always have. The only things I've done since the restoration has been updated Windows and things like Java and Flash.

  Someone has advice on how to solve this error message so I do not understand whenever I use my printer?

  Phenyx,

  You can copy a document under the glass? No computer is needed to do this correct?

  I would try reinstalling the printer by following the instructions below.

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Reference Dell 926 Photo all-in-One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Rick

• OfficeJet 6300 all-in-One, the error message which is print cartridge is open

  I use my all-in-one HP Officejet 6300 as a standalone Copier, because he's too old to install it on my Windows 7. Now, I get the error message that the print cartridge door is open. I can't find any door open but can not use the machine until I get rid of this message.

  I solved my problem by placing a heavy book on top of the printer. Apparaently, something is a little out of place and the book guard door is closed properly. Not a very technical solution, but it worked for me

• persistent fault message on the printer to HP photosmart 7200

  I get the message "0x6100004c general Printer Error, refer to the printer Documentation."

  When I go into settings it is said, "there is a problem with the printer or the ink system.  "Turn the printer off, then on.  I did it several times without success.

  The ink levels are fine.

  I am able to fax.

  Help.

  Hi MillVally,

  I am pleased that you have found a video to help you through the steps.

  I recommend you to call HP.  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  As mentioned, the HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

  Even if it is out of warranty, give them a call, it is always interesting to see if there is anything they can offer.

• OPMSTM080.exe have insattted a new printer, I get this error message evry times print something

  OPMSTM080.exe have insattted a new printer, I get this error message evry times print something

  Hello District Commissioner,

  Thank you for your message.  What is the make and model of your printer?  Go to the website of the manufacturer of your printer and download/install the latest drivers for your computer.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• C3086UA #A8A: Error Message on the laptop computer says driver is not available and device error

  I tried to print from my laptop, a HP Pavilion G7, and nothing happened I went in devices and saw an error message on the PC icon.  He showed me the yellow exclamation point and says driver is unavailable and driver error.  The icon of the printer showed it's OK with the green check mark. I am an older person with not much technical experience and would appreciate any help on how to solve this problem with the drivers. Thanks for any help you can provide.

  Paul

  Hi @doowop47 ,

  Thank you for your query.

  I'm not sure if it is a printer problem or a problem of computer as you said that the error is on the PC icon not the icon of the printer.
   
  Unfortunately, I was unable to locate your model of laptop Pavilion G7 since the number you provided. This link should help with that.

  How can I find my model number or product number?

  Were there any recent changes?

  You did all your Windows updates?

  Have you tried to run the HP Support Assistant to help with the updates from HP.

  If it worked before you tried to do a restore to a date well known?

  You can also try a Refresh Your PC to solve problems (Windows 8)

  If it is a printer problem, and it is not an HP printer, it would be preferable for you to post in the constructor for the instance of printers.

  If it's an HP printer, please provide your exact name and model.

  Good luck!

• Error "check out the printed put, put printed on may be printed incorrectly.

  When I printed this time I got error "check out the printed put, put printed on can be printed incorrectly" when I test print this time only paper to jump, no printing ink on paper & I mentioned error came also. I have reinstalleddriver & printer spooler is restarted, cable also only checked no problems found but repeat same mistake. PSL help me more early like! possible, can you help me to find what parts of the printer is damage or nuisance os?... Please help me

  Hello Vishnu,

  You can try to follow the below link to check if the common issues with printer are the reason for the error message.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. Otherwise, feel free to brief us back for assistance.

  Thank you

• Pinting/sharing, error 2114. The printer cannot be used by others on the network. Event ID: 315

  In my event log, I get the message "the print spooler could not share printer HP Deskject F2200 series with the HP Deskjet F2200 shared resource name.

  series. Error 2114. The printer cannot be used by others on the network.  Event ID: 315. "I have only one printer, and I'm not on a network share.  I only turn

  It's on when I need to use it.  Why I get this error?  It would cause my computer to freeze?

  BJB

  Hello

  I suggest you to refer to this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-2114/b87aa4ed-b4fb-43E0-9080-e3a7d7ffeaa3

  It will be useful.

• error message in the terminal window

  I created a new profile. And, in doing so, you work with a terminal window.

  During this process, I noticed this error message when I use FF
  I receive the error message in the terminal window and I can confirm that I see what you were using a new profile or old

  "Socket error [AGENT]: [object [object event] XrayWrapper]; readyState = 3. Maybe Helper does not work on xxxx or stop? "Console.Error: onepassword:"

  XX is a number - do not know if has been deprived so xxx.

  What does this message mean?
  I have problems connecting with 2 services I use. I can't even log a new question in my old account of support of ff. I have EDT cleared the cache, cookies, history, started in safe mode.
  I restarted the router.

  but nothing works
  ideas?

  I also have
  -restarted my system.
  -retested, and the message appears only when I use firefox

  EDIT
  solved by uninstalling the related to the addon of 1password desktop application. Desktop application is the mac version of 1password.

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

• Used my copy of OSX MAvericks in the past, but now I get an error message that the application cannot be verified and go to the App Store. I did, but there is nothing to install OSX Mavericks download?

  Used my copy of OSX MAvericks in the past, but now I get an error message that the application cannot be verified and go to the App Store. I did, but there is nothing to install OSX Mavericks download?

  Log in to the App Store and look under the purchases tab.