Similar Questions

• Wait for the event begins with SQL * Net message from client-time wait 178577 units

  Hello
  
  I'm watching events waiting for a request from long time in TOAD.
  I start the query on an instance of TOAD, and open the browser to log on to another instance.
  But I am surprised to see that in "TOtal expected" on the RIGHT part->
  SQL * Net message from client is the longest time and is already - > 178577 units while I just to start the query.
  
  Considering that, in the current waiting she shows DB file scattered read correctly for a few seconds.
  
  Please suggest.

  user8941550 wrote:
  Hello. No explanation for this... :-(

  Hello

  people work here, you don't know?
  I think Tom Kyte explains it well enough. This wait event is linked to your session database waiting for the guest to say to do something.

  So it is not related to the database, but to your application.
  Also as it is a wait of session event you might have had your session inactive for some time (do nothing)

  If you want to check the waiting events correctly I suggest using tkprof and start a new session in SQL more as shown by Tom Kyte in the link I posted.

  Then, run your query in sqlplus setting track and pull it out as soon as your statement is completed.
  that is to say:

  -- myest.sql
  alter session set events '10046 trace name context forever, level 12';
  SELECT ... -- your query here
  exit
  

  Run in sqlplus in this way:

  sqlplus user/password@db @mytest.sql
  

  Then check with tkprof.

  Kind regards.
  Al

• The event viewer displays continuously errors with ID 7000 and 7009

  I use Acronis Disk Monitor, which shows the disk health 82% due to a bad block on disk. Observer events poster continually errors on ID 7000 and 7009, but I can't find a solution to these errors or what they mean exactly.

  11/14/2010 08:31 am, Catkin333 wrote:

  I use Acronis Disk Monitor, which shows 82% because of the bad health disk
  block on the disk. Event Viewer displays continuously errors on ID 7000 and
  7009, but I can't find a solution to these errors or that they
  mean exactly.

  If Acronis reports bad blocks on the disk, then you should replace the disk as soon as possible.  Blocks of bad sectors/bad is not repairable, and once they begin to appear that they tend to behave like a snowball rolling downhill, you will get several of them with increasing speed.  You may lose your data if you keep using this drive.

  Regarding the events 7009 & 7000, you will need to copy & paste the events here for give us to you more information.  Double-click on the event to see its properties, and then click the icon of the Clipboard (which looks like 2 pages of paper) to copy the event, you can then paste it in your next post.  These Service Controller errors may be caused by a multitude of different things.

  John

• The event handlers for multiple displays involving data SUBMIT and GET

  Hello

  We have a requirement as below:

  Note: cannot share the details accurate screen customer etc. because of the limitations of data security

  For example

  (1) 1 screen.

  Please enter the employee ID you want to recover data for

  (2) 2nd screen-

  Now, based on input that the user gives on the first screen that EMP_ID, we want to retrieve the details of a DB(not to worry as the DB connection part is taken care of) Native and display on-screen in the respective attributes.

  After that the user sees the correct details on the 2nd screen, they can go ahead and edit the details and which must be submitted to the DB.

  Queries:

  (1) we tried to use different managers and - OnSessionCreatedEventHandler, OnSubmitDataEventHandler - but what happens is the OnSessionCreatedEventHandler not get entry into the 1st screen, because it (i.e. OnSessionCreatedEventHandler) is triggered immediately after the loading of the 1st screen.

  The handleEvent() for the OnSessionCreatedEventHandler method has a piece of hibernate code base that requires the EMP_ID as input to run the query. So when the 1st screen itself is loaded, the event handler fails to get the emp_id entered by the user, because it is not yet approved in the session, finally throw an exception to put into hibernation.

  (2) is it possible, we could use an EventHandler or combination of these, to capture the data entered on the 1st screen and commit in the session, so that the 2nd screen can take this value from the session and then extract the DB.

  Any help would be much appreciated.

  The real scenario involves a lot of complex business rules and hibernate activity as well, but now those who have been supported.

  Hello

  You can implement an OnBeforeSubmitData handler that does something like the following:

  Look in the data presented for the user name attribute and if necessary

  Call your Hibernate utility to search for additional data

  Add additional data to the data sent

  During your 1st screen send the related data will be submitted with it.

  An alternative would be to have the user enter their Id in a Java screen, maybe a kind of servlet filter to make a pseudo login and then add user for query parameters identification and redirect to the URL standard OWD. You can write a plugin Manager OnRequest to retrieve the id of the user, looking for seeds and additional data before the session thanks to this data.

  Maybe there are also other possibilities, and it would be a shame not to use the OPA to manage maintenance and business rules.

  Concerning

  Ian

• I have cs5 and it was working fine and now he keeps asking the serial number even after that I put it and gives it the green check mark then it goes straight to that now

  I have cs5 and it worked very well and now he keeps asking serial number, even though I put it and gives the green check mark then it goes straight to that now or it just goes to the license agreement and when I accept it is going t - he once again.  I have uninstalled completely and then reinstalled several times and still the same thing.

  Csingleton11,

  WIN8 is not listed as an operating system that can run CS5 (see technical specifications); However, some users were able to run it in compatibility mode with success. See this link if you want to give that a try: CS5 installation on Windows 8

  Guinot

• Add the variable of presentation in a prompt SQL results

  Hello friends!
  
  I have a prompt with the time Dimension (year (p.v. v_year) and month (p.v. v_month)). Then I have another guest of departments in the same page and I want to compel departments depends on my year and selected months before.
  
  I know to do with variable presentation, if I go to SQL results in prompt Department and ADD the following: "WHERE"Sun Time"." Year=@{v_year}"it works but I want to add months also!
  
  How can I do?
  
  
  Thank you very much!!!

  Hello

  Use single quotes...
  "like... month = ' @{var_month}"

  hope this can work...

• Need to learn the code of PL/SQL tuning

  Hi all

  I already asked this question earlier, but the link provided was too difficult to understand, I really grateful if someone suggest me the good and simple link or presentation for mentioned topic question.

  In addition, I just want to learn some basic for this. Appreciate your response. Thank you

  Concerning

  Muzz

  I already asked this question earlier, but the link provided was too difficult to understand, I really grateful if someone suggest me the good and simple link or presentation for mentioned topic question.

  Why PL/SQL tuning?

  The best advice re PL/SQL is to AVOID at all costs. Whenever possible, use SQL.

  It is usually the SQL to be tuned so that sql is autonomous or in code.

  As the major part of PL/SQL uses SQL to get the job done, you will be not successful tuning PL/SQL, unless you set the SQL contained in it.

  Start with the Oracle documentation:

  http://docs.Oracle.com/CD/B28359_01/server.111/b28274/sql_overview.htm

  This chapter deals with the objectives for the development, explains how to identify the high resource SQL statements, which must be collected, offers suggestions of setting and explains how to create SQL test scenarios to solve problems in SQL.

  This chapter contains the following sections:

  • Introduction to SQL Tuning
  • Goals for Tuning
  • Identify the high load SQL
  • Features of automatic adjustment of SQL
  • Effective development of SQL statements
  • Test SQL building case

  Then, learn how to use and interpret what the Wizard Setup of Sql from Oracle can make and provide:

  Update Auto SQL - 11 g Release 2 (11.2)

  17 automatic SQL Tuning

  This chapter examines the SQL Auto setting of the Oracle database features. Automatic tuning of SQL automates the manual process, which is complex, time consuming and repetitive.

  This chapter contains the following sections:

  • Overview of auto tuning optimizer
  • Automated SQL Tuning Advisor
  • Tuning how reactive with SQL Tuning Advisor
  • Management SQL Tuning games
  • SQL profile management
  • SQL Tuning views

  A lot of questions of PL/SQL, you encounter will be due to one of these things:

  1 poorly written SQL (see SQL tuning above)

  2. use of slow-by-slow (line by line) treatment in a loop

  3. poor use of collections and in bulk of treatment

  4. use of the dynamic sql

  All those who will take you to the SQL itself. The SQL is not set correctly if it is not possible for the PL/SQL to be tuned.

• Set the event level 38041 16

  Hello
  I learned at the end of the - Edit command set event 38041 trace name context forever, level 16' system;
  
  as workaround for bug 5645718 in dbms_stats.
  
  Question: In the unlikely case where issuing this command causes an unexpected problem in my production database, how can I cancel the order forward-backward and put the database back without having to resort to the backup restore?
  
  In addition, when the event is defined, what command can I use to check that it has been done and if I need to cancel it, what command can I use to check it's been overturned?
  
  Thank you

  How to determine what system events are being implemented? [845043.1 ID]
  How to set the EVENTS in the SPFILE [160178.1 ID]
  How to list the whole event named for a database [ID 436036.1]

  HTH...

• change of the indicator with time using the structure of the event

  Hi all

  I use a structure within the meaning of the event to change the State of an indicator. At this point, I was wondering is there a way I can monitor this change of State in a time interval?

  Which means that how I can raise the event only when the state change is long enough (for example 5 seconds), if there is a change of State, but the State eventually back to normal (less than 5 seconds), the event is not triggered.

  Thank you and hope someone can give me some advice on how to do this?

  Sorry for this reading does not completely. Here's a version that works and not stuck to wait.

• Using the Structure of the event in a Machine of State Enum

  Hello!

  I'm new to labview(~10 months). I tried my best to search on the forum/net but didn't have an explanation.
  I simplified the code to show the problem. I'm using Labview 2013 worm 13.0f2 (32 bit).

  The "EventStructure_Trigger_in_EnumStateMachine.vi" is a State Enum machine.
  The "resting" State contains a structure of event that detect evnet of changing value of 3 buttons:

  Do something touches: simply show something of the display flag
  Start Run button: bring the program into "run" State
  End key: put the program in the 'final' State and then close it

  The State of 'run' is a time loop that will be stopped only by clicking the 4th button - button stop running and bring back the program in case of 'lazy '.

  The problem is to "run" State, any click on irrelevent buttons 3 (buttons only detected by the structure of the event in case of 'lazy') will make the program crash.
  By comparison, I create an another vi attached as 'WhileLoop_in_EnumStateMachine.vi', which is almost the same except that the event structure is replaced by a while loop (and do something key has no function). In this vi, everything works well - by clicking the irrelevent buttons will not crash.

  I can't understand why.

  P.S. I failed to attach .vi onto this post... a zip compressed instead.

  A problem that resembles yours: http://forums.ni.com/t5/LabVIEW/why-does-simple-case-structure-code-hang/td-p/3176592

  I think that the response of Stuart will help you understand how your code handles this situation.

  You must manage your events outside your main loop to your structure to operate on any captured event.

• Several events in the Structure of the event

  Hi all

  I was wondering if there was a way to combine with the operator AND user events to an event. For example, I would an event when button1 AND button2, AND button3 were pressed. Mabye event strutures are not the right way to do it, but now when I add multiple events to an event framework, it seems to happen when one of the events is triggered, as event1 OR event2, OR event3 and I can not understand how to change that.

  I hope it makes sense what I want to do. I Nestle my structures of the event, but I'm sure it is bad and would give unexpected errors. Please notify.

  Thank you!

  Use a shift register and maintain States whose keys were pressed. Then, you can actually run code you want once all have been pressed. If you do this you afflicted to a timeout to clear the buttons not pressed state if only one or two have been pressed and nothing more certain period of time.

• Question about consistent errors in the event viewer XP Home Edition

  I ran a program called VEW looking errors up to twenty in the XP Event Viewer.

  Here is the data for the analysis of files:

  V01c Vino event viewer run on Windows XP in English
  Report run at 28/01/2012 23:42:23

  Note: All dates below are in the format dd/mm/yyyy

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  "System" Log - error Type
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Journal: "System" Date/time: 01/28/2012 22:48:06
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 01/28/2012 22:47:40
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 01/28/2012 22:35:31
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012-22:49:54
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 27/01/2012-22:37:21
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012-14:32:57
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012 03:38:23
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 25/01/2012-13:53:36
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 25/01/2012-13:32:34
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 23:35:59
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 24/01/2012 23:21:10
  Type: error category: 0
  Event: 29 Source: W32Time
  The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible.  No attempt to contact a source will be for 14 minutes. NtpClient has no source of accurate time.

  Journal: "System" Date/time: 24/01/2012 23:21:10
  Type: error category: 0
  Event: 17 Source: W32Time
  Time provider NtpClient: an error has occurred during the DNS lookup of the manually configured peer 'time.nist.gov, 0x1 '. NtpClient will try the DNS lookup in 15 minutes. The error was: a socket operation was attempted to an unreachable host. (0 x 80072751)

  Journal: "System" Date/time: 24/01/2012 23:18:36
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 02:15:46
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012-12:58:29 AM
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 24/01/2012 00 h delighteth
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: 'System' time: 23/01/2012 23:26:32
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: 'System' time: 23/01/2012 23:26:19
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: 'System' time: 23/01/2012 23:02:41
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: 'System' time: 23/01/2012 18:28:49
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 23:35:59

  Parameters of scanning has been:

  • System
  • Errors
  • 1-20 errors, valued at twenty.

  What are these errors and they are nothing to worry about?

  I have Nero 8 on this system and have an updated hosts file the running here: http://winhelp2002.mvps.org/hosts.htm

  Not sure, but I may have changed a network setting to activate the new hosts file work properly.

  Seen these errors for a while. system works well and smoothly.  No symptoms of malware or infection seen or found.  I would call these software errors as they seem does not affect the operation of the system.

  XP Home Edition SP3 P4 2.8 2 GB RAM

  Joe

  Oh yes :)

  I have never used the program VEW and don't think I will check it - I just look at the Event Viewer logs the old-fashioned way (manually) if I think that there is a problem, but that might just be the old me.

  It is true that XP Home doesn't have Group Policy Editor, but all policy settings are always available via the registry.

  Some malware will change your GP settings and cause problems.

  I have a little import registry will correct all the ones I know, so if someone has these symptoms, any flavor of XP, they are running, I'll just send the script because sometimes you will be not able to solve the problem, even if you have not the GP Editor.

  The registry always import work - and work well for XP Home or XP Pro.  If you have the symptoms and XP Home, what would you?   Start the import operation of the registry.

  If you're curious, off on my SkyDrive it is a spreadsheet Excel (Group Policy settings) who has all the parameters of GP and where they are in the registry.  I do not recommend start searching, but it is useful to know where things are if there is a problem.

  I would not allow the connection of a security XP stuff unless you think you're being attacked.  More and verbose logging slows things down.  My Event Viewer Security log is empty.

  Find the links to the Microsoft Support Engineer for the most part useless to actually solve a problem (because it help you with your problem), if someone has a question or point of Event Viewer, I usually just send them this:

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  The most interesting newspapers are usually the system and Application logs.

  Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default settings for XP wants do not connect all this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

  If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

  Not every event is a problem, some are informational messages that things work very well, and some are warnings.

  However, no event should defy reasonable explanation.

  Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s.
  Informational messages have white is.  Not every error or warning event means that there is a serious question.

  Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

  You can search for events on the World Wide Web and get ideas.  It's where people events they see and then to the top of their questions, ideas and solutions:

  http://www.EventID.NET/

  If you find your event in the discussion, the first idea or discussion does not necessarily mean it is the "answer" to your situation, so read through all the ideas to find the one that sounds more like your situation.

• Injection of the event to answer call waiting

  Hello

  I am trying to answer a phone call using injection of the event, I saw a few discussions about this, and it seems that the method I use is correct is a sense. I can answer a call on callIncoming, but not on callWaiting. I can answer both using the Simulator, but the device does not respond on callWaiting.

  This is my method:

  In callIncoming/callWaiting, I create a timer with a delay of 100 ms, which calls a function that sends KEY_SEND up and down events. Simple, but it only accepts a standard appeal, not an appeal pending.

  Can someone advise?

  Concerning

  Lionel

  Figured this out, increasing the timer time solves the problem.

• refuses to load the snap-in of the event viewer

  now, the MMC is running and I can't hit Cancel or X. I don't know what his weight

  Hello

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, you have problems with the event viewer.

  This problem occurs because of an update of the .net framework.

  Install the patch from the link below and see if it helps.

  http://blogs.technet.com/b/askperf/archive/2012/08/10/MMC-has-detected-an-error-in-a-snap-in-and-will-unload-it.aspx

  Answer to us if you are having problems with the event viewer or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• No bar reading HTML5 for video of the event, someone at - it workaround?

  I have several videos of the event in my project CP6 and after weeks of fighting and with assistance from the allstars Forum project works flawless in SWF and. EXE to publish, so of course the bossman wants on his iphone and tablets. No problem, after following the advice of the Captivate Forum of God I built the HTML5 functionailty in the project initially so no HTML5 tracker do issues here! Except that I forgot that the HTML5 video playback controls are based off of the browser so my Swf player bars are gone when published on HTML5. I'm looking for some examples, trial and error or advice on getting control of playback bar on my videos of the event. And no I don't want the PlayBar project to fight against it, it must be 'on its own' as it is now as a 'pop up' (Show/Hide button control) on a single slide. On this simple slide, I have about 7 videos of the event which are skipped upward, game bar controlled and closed by a user individually.

  I know that it becomes one big problem with others then all the ideas, advice, examples would be great for everyone!

  Thank you!

  

  Hello

  I got the answer from the team concerned, the video playback is a skin (.swf file), and HTML5 does not load the .swf

  Thank you

  Vikram