ASM configuration issues
I'm looking to see what situation is better regarding my ASM configuration and what would the dispatch behavior. I use OEL 5 Update 2 x 86-64 and 11 GR 2 Oracle database and 11 GR 2 ASM.Configuration 1
4 physical HD RAID 5
4 100 GB LUN
1 disc ASM for each LUN
2 (DATA and FRA) ASM disk groups
2 ASM disks by ASM disk group
Installer 2
4 physical HD RAID 5
2 200 GB LUN
1 disc ASM for each LUN
2 (DATA and FRA) ASM disk groups
1 disc ASM ASM disk group
Question 1:
In configuration 1, given that the ASM disks for group to data disks are on the same physical disks, would be this important cause of hotspots. I understand it undoubttedly would claim.
Question 2:
2 installation, ASM would not fail because it cannot scratched in this configuration with only one disk of the DSO. In other words, the ASM would work but simply tape even if the physical HD underscore aren't be scratched by RAID 5.
Question 3:
What Setup is better in terms of availability and performance?
Thank you.
Please see my previous response on hardware RAID, you must use. It depends on your fault tolerance acceptable device, compared to considerations of capacity and performance, also depending on your storage controller.
The configuration you have provided, I suggest to create 4 readers (LUN LUN) of the same size on your RAID storage space. Then create a large partition on all 4 discs and use for example Linux ASMLib to assign these scores to the DSO. ASM to create a diskgroup (+ DATA) using the 4 ASM disks with external redundancy.
I would not throw the discussion about the location of the ASM parameter in this thread. It's a completely different subject.
Tags: Database
Similar Questions
-
ASM Configuration prior to installation of Network Infrastructure
Hello
I want to install a network infrastructure for a stand-alone server 12 c on a virtual machine, it is a first installation, no front installed Oracle software.
My problem is on the third screen of the Installer (create the ASM disk group), I can't view the ASM disks and the preinstallation process is not clear to me.
I defined the systems files/U02, /u03, /u04 and /u05 with the oradata and recovery_area directories (oracle: oinstall) for each /u0 * and I want to use them with the DSO.
I installed the oracleasm-support and oracleasmlib packages, I executed oracleasm configure with parameters of dba (Group) and oracle (user).
Question 1: I need to run init oracleasm (with default settings) to create the/dev/oracleasm before launching the installer of the grid?
Question 2: I run oracleasm createdisk before launching the installer of the grid?
Question 3: What is the proper syntax for the parameter createdisk command 2nd (/ u02, / dev/map/VG_ORA-lv_u02, / u02/oradata,...)?
Thank you
Daniel
Hi Daniel,.
There is a lot of confusion here.
ASM is just another Manager file system offering you a more simple and flexible LUN management. Basically, you choose to transfer your database in the file system (/ u01, / U02, oradata, recovery_area) OR if you choose to use the DSO. If you choose to use the DSO, you must create the ASM diskgroup before installing your database. As you mentioned as part of the installation you need to 'discover' the ASM disks and create the first disk group where the DSO Server settings file is kept.
To do this you have need of screening to the ASM one or more LUNS that are owner by user oracle. Lets assume you want to create two groups of DATA and FRA disks and make your databsae to use. If you use a virtual machine, you need to create more than two disks. Once you do that you have to idetify them, they will be discovered under/dev/sdX. On the same, you must create a partition to fill the entire disc (fdisk/dev/sdX, n for new, p for primary school, 1 to the first disk, and then you press ENTER twice, finally w for write). Finally, you need to make the new owner devides/dev/sdX1 by oracle (oracle: oinstall/dev/sdX1 chown).
At this point, you should go back to the installer and change the string of disc asm/dev/SD * 1, this will make ASM read all the first partition of all the/dev/disks in sd. Then, you select the disks that you want to use for the default disk group. This can be repeated for the rest of the disk group you want to create using asmca (asm Setup Wizard) or simply using SQL command.
oracleasm is the ASMLib that was used as a layer of abstraction to make sure that the device files will always have the correct permissions. Nowadays, making using udev as follows:
Cat > /etc/udev/rules.d/99-oracle-asm.rules
SUBSYSTEM is 'block', KERNEL is "sdf1", NAME = "asm_data01_disk1", OWNER: 'oracle', GROUP =: = 'dba', MODE: = "660".
When you start this matches the device to/dev/sdf1 file and create an other device file under/dev/asm_data01_disk1 with permissions oracle: dba
Hope this helps, but it's just too much information.
Kind regards
EVS
-
I think I have I need help to get my right to ASM storage. Recently I changed businesses and the new place is a House of Windows, so Oracle databases are all on 2008 R2 machines. I run Oracle RAC on both physical and virtual before, but only in Linux/Unix environments (up to now, I still prefer) so I'm still learning some of the ins and outs. This company seeks also to travel to the RAC, ASM is in the mix. To start my tests, I have implemented an ASM instance for a single host that will eventually become a pole of development taking into multiple databases. However, before I set up data bases, the host is locked up. I think it has something to do with the configuration of the disk, because while the entrapment took place while the virtual machine is idling, several crashes occurred when I try to remove a drive within the ASM. I followed the Oracle documentation for Windows platforms, but this documentation does not offer overview of storage virtualization.
Here is my configuration:
VMware: vSphere 5.5
OS: Windows 2008 R2 Standard
Memory: 12G
Storage (SCSI LSI): OS: 60G; ASM: 20G, 5G, 5G
Oracle Grid: 11.2.0.4 (more January 2014 CPU)
Oracle database: 11.2.0.4 (more January 2014 CPU)
Other details (perhaps important, perhaps not):
(1) I have a large pages activated
(2) drives are supplied thin. Note, I always thick-stocked my ASM, but our admin SR records. HE made a policy that all disks must be supplied thin for efficiency. I don't know if this could cause a problem.
(3) I work for have the 3 ASM (20 G, 5 G, 5 G) discs set up on different SCSI controllers paravirtualized (another admin IT - SCSI LSI default policy) because they will be used for the DB, the JOURNAL and FRA respectively.
(4) the host also has an OEM 12 c Agent installed and running.
I'm new on the Windows platform when it comes to Oracle (I managed a lot of SQL Server DBs), blocks do not appear to produce any type of data in the logs.
Found the problem. It's the AV software Nothing to do with vmware, it turns out that).
-
11R2 asm configuration on HACMP
Hi, I have already set up 11 GR 2 asm of installation on my server.
Now I want to configure/convert this set upward in ACTIVE PASIVE hacmp node.
So I again install grid and oracle on the second node?
Requirement: implementation will look like:
IBM aix HACMP 7.1 active passive cluster with storage common asm
So I again install grid and oracle on the second node?
Yes, you do... pretty do everything what you were doing on the first node. Create users, groups, install software, etc.
-
VIP - ANALYZE Configuration Issues - Please help!
Hello world
First of all I ask you guys to Please HELP SOLVE ME THIS PROBLEM – thank you!
I am installing grid Infrastructure Oracle 11 g 2 11.0.2.0.3 on Oracle Solaris 11.11 x 86 64 bit installed using Live Media on Oracle VirtualBox 4.2.6.
After you have configured the nodes in the cluster, I ran the cluster verification utility that came out with 100% success.
However, during root.sh run, I get the following error:
/U01/app/11.2.0/grid/root.sh
--------------------------------------------------
CRS-4266: Vote or managed to replace the files
# File group universal name Id disk STATE file
-- ----- ----------------- --------- ---------
1. online 4a3543261bc34fc9bf6e41b5d7fa04c8 (/ dev/rdsk/c8t2d0s1) [OCR]
Located at 1 vote (s) disk.
CRS-2672: attempt to start 'ora.asm' on 'sol1.
CRS-2676: beginning of "ora.asm", the successful "sol1"
CRS-2672: attempt to start ' ora. OCR.dg' on 'sol1.
CRS-2676: beginning with ' ora. OCR.dg' on 'sol1' successful
/U01/app/11.2.0/grid/bin/srvctl start applications sol1 - n... failed
FirstNode configuration failed on line /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm 9196.
/U01/app/11.2.0/grid/Perl/bin/perl-I/U01/app/11.2.0/grid/Perl/lib-I/U01/app/11.2.0/grid/CRS/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
I have re-run this command to see the real errors
/U01/app/11.2.0/grid/bin/srvctl start applications sol1 - n
------------------------------------------------------------------------------------
RPRC-1013: failed to start of ora.net1.network resources
RPRC-1064: failed to start of ora.net1.network on node sol1 resources
CRS-2674: beginning of "ora.net1.network", the "sol1' failed
RPRC-1079: failed to start of ora.sol1.vip resources
CRS-2674: beginning of "ora.net1.network", the "sol1' failed
CRS-2632: there is no more servers to try to place the "ora.sol1.vip" resource on which will achieve its investment policy
RPRC-1013: failed to start of ora.ons resources
RPRC-1064: failed to start of ora.ons on node sol1 resources
CRS-2674: beginning of "ora.net1.network", the "sol1' failed
I ran the following commands to know the State of SAN and SCAN-headphones
srvctl status scan
--------------------------------
VIP scan1 SCAN is enabled
Scan1 VIP SCAN does not work
VIP SCAN scan2 is enabled
Scan2 VIP SCAN does not work
SCAN VIP Scan3 is enabled
Scan3 VIP SCAN does not work
srvctl status scan_listener
--------------------------------------------
LISTENER_SCAN1 listener to SCAN is enabled
SCAN of the earpiece that listener_scan1 is not running
LISTENER_SCAN2 listener to SCAN is enabled
SCAN of the earpiece that listener_scan2 is not running
LISTENER_SCAN3 listener to SCAN is enabled
SCAN of the earpiece that listener_scan3 is not running
srvctl config scan_listener
---------------------------------------------
LISTENER_SCAN1 listener SCAN exists. Port: TCP:1521
LISTENER_SCAN2 listener SCAN exists. Port: TCP:1521
LISTENER_SCAN3 listener SCAN exists. Port: TCP:1521
Here is the content of my/etc/hosts and /etc/resolv.conf files
cat/etc/hosts
-----------------------------
# Public
192.168.56.101 sol1.localdomain loghost sol1
192.168.56.102 sol2.localdomain sol2
192.168.56.160 solfiler solfiler.localdomain
# VIP
192.168.56.111 sol1-vip sol1 - vip.localdomain
192.168.56.112 sol2-vip sol2 - vip.localdomain
# Private interconnection
192.168.0.101 sol1-priv sol1 - priv.localdomain
192.168.0.102 sol2-priv sol2 - priv.localdomain
# Scan
#192.168.56.201 ground-sweeping ground - scan.localdomain
#192.168.56.202 ground-sweeping ground - scan.localdomain
#192.168.56.203 ground-sweeping ground - scan.localdomain
cat /etc/resolv.conf
------------------------------------
#
# AUTOMATICALLY generatedFROM_SMF_V1_
#
# ATTENTION: THIS FILE GENERATED FROM SMF DATA.
# DO NOT EDIT THIS FILE. CHANGES WILL BE LOST.
# See /etc/resolv.conf (4) for more details.
Search localdomain
nameserver 192.168.56.101
nameserver 192.168.56.102
nameserver 192.168.1.1
Here are the details of the network
dladm show-phys
----------------------------------
MEDIA SPEED DUPLEX LINK
Net1 Ethernet up to 1000 complete e1000g1
NET2 Ethernet up to 1000 full e1000g2
Net0 Ethernet up to 1000 complete e1000g0
ipadm show-addr
---------------------------------
ADDROBJ TYPE STATE ADDR
127.0.0.1/8 ok static lo0/v4
Net0/v4 dhcp ok 10.0.2.15/24
Net1/addr static 192.168.56.101/24 ok
NET2/addr static 192.168.0.101/24 ok
OK static lo0/v6: 1/128
Net0/v6 addrconf ok fe80::a00:27ff:fe5f:f484 / 10
I did the nslookup on my name SCAN
Nslookup ground-scan
----------------------------------
Name: sol - scan.localdomain
Address: 192.168.56.202
Name: sol - scan.localdomain
Address: 192.168.56.203
Name: sol - scan.localdomain
Address: 192.168.56.201
I ran the following commands to see if the installation process correctly reads my SCANNING configuration
srvctl stop scan_listener
srvctl stop scan
srvctl config scan
-----------------------------
SCAN name: ground-scan, network: 1/192.168.56.0/255.255.255.0/net1
SCAN VIP name: scan1, IP: /sol-scan/192.168.56.203
SCAN VIP name: scan2, IP: /sol-scan/192.168.56.201
SCAN VIP name: scan3, IP: /sol-scan/192.168.56.202
So it's good reading ANALYSIS information there is so no problem
I tried to start listeners to SWEEP and ended up with the same mistakes
srvctl start scan_listener
------------------------------------------
RPRC-1079: could not start the ora of the resource. LISTENER_SCAN1. LSNR
CRS-2674: beginning of "ora.net1.network", the "sol1' failed
CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN1. LSNR' on which would meet its investment policy
RPRC-1079: could not start the ora of the resource. LISTENER_SCAN2. LSNR
CRS-2674: beginning of "ora.net1.network", the "sol1' failed
CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN2. LSNR' on which would meet its investment policy
RPRC-1079: could not start the ora of the resource. LISTENER_SCAN3. LSNR
CRS-2674: beginning of "ora.net1.network", the "sol1' failed
CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN3. LSNR' on which would meet its investment policy
If it helps, I use automatic network default Solaris 11.11 management but I changed IP addresses of net1 and net2 manually to meet my network
Requirements for the clusterware.
I followed all the steps of the system requirements for installing under solaris 11.
After checking everything I could have as detailed above, I'm now helpless as to where things go wrong
What is automatic 11.11 Solaris network management that does not allow the creation of addresses IP SCAN VIP?
Once again I ASK YOU GUYS to Please HELP me THIS PROBLEM FIX.
Concerning
Terry.Hello
the problem is the host name of the server is resolved is on the 10.X.X.X network.
For example, the cluster requires the public network to be on this network. And the error you get, because this network is on DHCP.If you have the following options that you can try:
a.) change the server to have the host name to resolve to the 192.X network
(b) change the order of the network adapters
(c.) remove the network 10.X.X.X at the moment of installationConcerning
Sebastian -
ASM Configuration on Windows Server 2003
Hi all
My Version of DB: 10.2.0
OS version: Windows Server 2003
I try to configure ASM on stand-alone server using DBCA, but when I try to start OCSS by running the batch localconfig file it does not work.
Is someone can you please tell me where I am wrongSQL > create diskgroup data external redundancy disk
2 'I:\ASMDISKS\ DISK1. "
3 'I:\ASMDISKS\ DISK2.
4 'I:\ASMDISKS\ DISK3 ';
create diskgroup data external redundancy diskMaybe you caught ;-), looks like there's space between ASMDISKS and DISKn .
Correct it and create it again. post if no errors.
-
How to resize tablespace Temp in rac asm configuration
Hi all
Please help me,
How to resize the tablespace temp in asm in a rac configuration.
OS: IBM AIX.
Kind regards
VAMSi.Try this:
ALTER DATABASE TEMPFILE '+ ASMDB/gcprod/tempfile/temp.263.661355157' RESIZE 1000M;
-
Hello
I'm trying to configure ASM (10.2.0.1) on redhat linux 5 system (for learning purpose). I downloaded
the required ASMLIB. I'm confused in the partition of drive for ASM. My problem is that I have a 320 GB HDD,
i.e. on which has 65 GB as unallocated partition is neither under windows OS and Linux OS.
I want to use this for ASM 65 GB partition. I went through the documentation and a few other links but
Anyway, they used "fdisk" and created the main partitions and partition empty then extended
hard drive. Please suggest, how to use this particular partition of 65GB...
Here is the output from 'fdisk '.
[root@DBA1 ~]# fdisk -l Disk /dev/hda: 320.0 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 3264 26214400 7 HPFS/NTFS /dev/hda2 3264 9792 52435968 7 HPFS/NTFS /dev/hda3 9792 13056 26214400 7 HPFS/NTFS /dev/hda4 13057 38913 207696352+ 5 Extended /dev/hda5 13057 13183 1020096 83 Linux /dev/hda6 13184 19557 51199123+ 83 Linux /dev/hda7 19558 20832 10241406 83 Linux /dev/hda8 20833 21852 8193118+ 82 Linux swap / Solaris /dev/hda9 21853 28226 51199123+ 83 Linux /dev/hda10 28227 29246 8193118+ 83 Linux /dev/hda11 29247 29883 5116671 83 Linux /dev/hda12 29884 30138 2048256 83 Linux /dev/hda13 30139 30393 2048256 83 Linux
Yogesh,
If you all you need to do is practice, the following 3 links should be good enough to help you get started.
http://blogs.Oracle.com/AlejandroVargas/Lab1-configuration-of-devices-for-ASM.PDF
http://blogs.Oracle.com/AlejandroVargas/LAB2-install-and-configure-ASMLib.PDF
http://blogs.Oracle.com/AlejandroVargas/Lab3-create-ASM-instance-and-managing-Diskgroups.PDF
http://blogs.Oracle.com/AlejandroVargas/Lab4-install-configure-and-run-Orion.PDF
http://blogs.Oracle.com/AlejandroVargas/Lab5-RMAN-migrate-into-ASM.PDFHTH
Aman... -
Portably SA60-652 - configuration issues
On startup, I get a small "Windows Installer" window trying to configure the Office 2000 program and ask to insert a Microsoft Office 2000 - Rom2 CD, which was not included with the computer.
How can I solve my problem? Thank you
DavidHello
Can you please tell me when you get this message? At the start of the CE (operating system or Office 2000 program)?
-
I am trying to set up a network at home via my WRT310N router N Wireless, but have a somewhat convoluted Setup, go home. More specifically, I have a Verizon Actiontec modem/router combo, G who is serving more than one PC Wired has provided, as well as some wireless clients. I would like to connect the WRT310N the ActionTec router and have a Wireless N dedicated va that can also access the internet, but also a handful of wireline customers. Two routers are connected wan wan port port.
However, I don't know how to set up the "Internet IP" of the WRT310N so that both routers to communicate between them. If I put a static IP address which is identical to the IP of the router, I get a warning indicating that the internet IP and router IPS are on the same subnet and is not kosher (which I guess makes sense). Define the Internet IP to DHCP function results in no IP being pulled from the Actiontec router (presumably for the same reasons)
Is anyway to configure the router behaves more like an access point?
Worked like a charm. Thank you!
-
GANYMEDE + with 3560 cisco switch configuration issue
Hi Forum,
Here's my setup GANYMEDE + on my cisco 3560 switch and my question is, how can I configure the switch, if I would not type enable after I put the user name and password? with configs below, users will need to type activate whenever they connect to the switch in order to enter the user exec mode. Please let me know if there is something missing in my configs to help me avoid typing 'enable '.
Thanks in advance,
MacBookAir: ~ MacBook$ ssh [email protected]/ * /.
Password:
Switch > en
Switch #show run | include the aaa
AAA new-model
AAA server Ganymede group + mpcc
AAA authentication login default group Ganymede + local
activate the default AAA authentication no
AAA authorization exec default group Ganymede + authenticated if
AAA authorization commands 1 default group Ganymede + authenticated if
AAA authorization commands 15 default group Ganymede + authenticated if
start-stop radius group AAA accounting dot1x default
AAA accounting exec default start-stop Ganymede group.
orders accounting AAA 1 by default start-stop Ganymede group.
orders accounting AAA 15 by default start-stop Ganymede group.
AAA accounting system default start-stop Ganymede group.
AAA server RADIUS Dynamics-author
AAA - the id of the joint session
Switch #.
Hello
Add the level of privilege 15 control VTY line configuration.
line vty 0 4 [..] privilege level 15 !
Concerning
-
Cisco 867VAE configuration issues - does no routing between LAN &; WAN
Im trying to configure a 867VAE to use our ADSL line. I can do to connect to the ISP, get an IP on their part and can ping 8.8.8.8 (Server DNS Googles) since the CLI routers but the side LAN does not work.
Im just trying to assign static addresses to the side in the 192.168.1.0 LAN range, but it does not seem to carry the traffic from one side to the other. Can it be related to not being able to assign an IP address to all four ports Fast Ethernet (switch)? I get IP addresses cannot be set up on L2 links so Ive vlan1 configuration instead, but that cannot link to any real interface
Attached is the current running config
Can as a question you please recommend a good book to learn how to do this sort of thing?
Thank you
Hi ports 800 series which are l2 may not take an ip address like you because they are pure switch ports, so if you your using several VLANS part SVI Layer 3 must be set to the router and the switchports to shared resources, if only using the vlan 1 should not no need to trunk or make changes to these default ports , they are in the vlan 1
You have a switch involved or are your PC connection directly to these ports, you set the gateway default ip address vlan 1?
The interface vlan 1 shows to the top and to the top when you run int ip see the brief
VLAN 1 is related to these ports, so when you connect to a pc with a correct address in this range him vlan will come and you should be able to ping from the local pc to the internet
You don't have to bother with books that all things CCNA are on youtube and much easier to learn videos and books as you can see it being configured
-
BlackBerry Smartphones Blackberry Bold 9900 email configuration issues
When I access the configuration application and e-mail accounts and select I get instructions to "activate your business account and enter the details provided by your system administrator." Looking at the information on the internet it seems I should get another option: "Internet mail account", but that option appears. I recently bought this phone and I have never set up a company account. Now I can't access my email via my phone. Any ideas?
Before you get too deep into what, please call your operator and confirm that you have the blackberry internet service added to your account. Without this service, you will not be able to email personal to be installed on this phone. Don't know what else to say on they mention, but you must have BIS added to your account in order to setup email. Even when a wifi connection.
-
BlackBerry smartphone T-Mobile Pearl 8220 Email configuration issues
Hello
When I tried to configure my personal e-mail with my BB Pearl 8220 (T-Mobile), there is no option for a personal e-mail account, only a business account. Can someone help get the personal account option to introduce or know something about it?
Thank you
-Dan
Do you have a data Plan BlackBerry enabled on your account with your carrier or mobile provider?
You have to, to get the push RIM email functions you are looking for, as well as services of BlackBerry data such as the Web browser, Facebook for BlackBerry, BlackBerry Messenger and much more.
Then call your carrier and you learn about to have added to your account BlackBerry data Plan.
Good luck.
-
I seem to have a problem getting a 3xT1 stuck solution to work. I can get 2 out of the 3 T1s to come and pass traffic, but I can't the third party to be added to the solution.
Material: No. 2851
IOS: c2800nm-advipservicesk9 - mz.124 - 15.T8.bin
Modules:
NAME: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 on the Slot, SubSlot 0 0 ', DESCR:"VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1.
PID: VWIC2-2MFT-T1/E1, VID: V01,.
(It is the map that is currently running 2 T1s glued very well).
NAME: "WAN Interface Card - CDU/CSU T1 fractional (V2) on the Slot 0 SubSlot 1 ', DESCR:" WAN Interface Card - DSU/CSU fractional T1 (V2).
PID: WIC-1DSU-T1-V2, VID: 1.0,.
(This is the card MLPPP single T1 will come which should be stuck with the other 2 with a configuration MLPPP)
NAME: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 on the Slot 0 SubSlot 2 ', DESCR:"VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1.
PID: VWIC2-2MFT-T1/E1, VID: V01,.
(This map is taken 2 running.)
Configuration:
controller T1 0/0/0
framing ESF
linecode b8zs
slots of channel-group 0 1 - 24
!
controller T1 0/0/1
framing ESF
linecode b8zs
slots of channel-group 0 1 - 24
!
controller T1 0/1/0 (this command does not work)
framing ESF
linecode b8zs
slots of channel-group 0 1 - 24
!
Multilink1 interface
MLPPP connection description
IP x.x.x.x where x.x.x.x
bandwidth 4608
no ip redirection
no ip unreachable
no road neighbor counterpart
No cdp enable
multilink PPP Panel
Panel multilink PPP Group 1
out of service-policy xxxxxxxx
!
interface Serial0/0/0:0
Description
no ip address
encapsulation ppp
no fair queue
multilink PPP Panel
Panel multilink PPP Group 1
!
interface Serial0/0/1:0
Description
no ip address
encapsulation ppp
no fair queue
multilink PPP Panel
Panel multilink PPP Group 1
!
interface Serial0/1/0
Description
no ip address
encapsulation ppp
no fair queue
multilink PPP Panel
Panel multilink PPP Group 1
!
As stated above the value S0/0/0:0 and S0/0/1:0 T1s servile work as designed and show both layer 1 is up and align the Protocol.
S0/1/0 shows that up but line protocol down.
Any ideas? Can I not use a WIC-1DSU-T1-V2 in a MLPPP configuration?
Looks like a carrier problem, check with the carrier the correct/linecode framing are in use and the third circuit is smooth. Config seems good.
Even if the Interface is up and down and will not join Multilink, another useful command is to see the ppp multilink gives you a quick look at what interfaces are attached to the multilink, just for future troubleshooting.
--
CCNP, CCIP, CHRC, CCNA: Security / Wireless
Blog: http://ccie-or-null.net/
Maybe you are looking for
-
PSAJOE satellite A300 - cannot remove the external HARD disc
Hello I have portable adjustable 300 (PSAJOE).I can't remove the external hard drive (Toshiba USB2 {80 GB}). Whenever I try to remove the device it just hangs. I use windows vista Home premium.Flah interesting little player with 2 GB capicty works ok
-
reading of the worksheet into an array of strings
Hello I need help to build an array of 1 d (string) from a MS Excel file. I tried to use spreaaadsheet reading / read the file of the measurement. I am unable to do this. The excel file contains alpha-numeric data. Please suggest with a few example s
-
HP ENVY printer 4520: Download the software keeps freezing
Try to download the printing HP ENVY 4520 for installation on my MacBook software.Download keeps freezing. Not a wifi connection problem.
-
[HELP] Lynksis WRT54G
Please I need help with my Lynksis of WRT54G Router. Here is the image. http://img843.imageshack.us/img843/6797/78105566.jpg I go to my IP 192.168 etc but nothings happen at all. Please I need help. What are the steps to understand this. I really app
-
Hello: I had some problems when I use the Qt for playbook SDK. 1. the applications developed by creator qr is very great. The helloworld example also is 80.2 M. Why? I don't know, I'm so confused. 2. How can I get the *.bar after completing the appli