ASM Migrage disk to another cluster group

Similar Questions

• If you use network storage, configure ASM disks with external redundancy groups

  Hi Experts,

  If you use network storage, configure ASM disks with external redundancy groups. Don't use groups of Oracle ASM failure. Oracle failure groups consume cycles additional CPU and can run in unpredictable ways after suffering from a disk failure. When you use external redundancy, disk failure are transparent to the database and do consume no additional database CPU cycle, because it is discharged on storage processors.

  This does not mean

  • RAID 1 + 0 for diskgroup + REDO1
  • RAID 1 + 0 for diskgroup + REDO2
  • RAID 5 for diskgroup + DATA
  • RAID 5 for diskgroup + FRA

  Is this one suggested, the recommended best practices for oracle on VMWARE?

  
  

  Thank you and best regards,

  IVW

  
  

  Hello

  You can check the storage analysis as well...

  http://www.Dell.com/downloads/global/solutions/tradeoffs_RAID5_RAID10.PDF

  discussion of the Oracle

  https://asktom.Oracle.com/pls/asktom/f?p=100:11:P11_QUESTION_ID:359617936136

• Remove the cluster 2 to another cluster

  I am trying to inspect a thread and if it contains a cluster, then pull the cluster and treat it separately from the original cluster.  Help on this would be greatly appreciated.

  _Vince wrote:

  After taking a step back and looking at the bigger picture,... First of all, I want to make a data table in a cluster, send the cluster added to a vi that takes the names and values to, and then treat the data table differently.  It is the basic action that I want to do, and then if there is another cluster in the first group that I wanted to extract and deal with it, as I first asked.

  Attached, is an example of what I'm trying to do.

  Fine thanks

  Vince

  You were so close.

  

  Ben

• How to migrate a VM from one cluster to another cluster using PowerCLI

  When I run the command

  Move-VM -VM $vm -Destination $ResourcePool -Confirm:$false

  I am getting following error

  Move-VM : 19.7.2011 15:32:07    Move-VM        Destination is a Resource Pool owned by a Cluster, but the VM you are trying to move is not in that Cluster. Please select for destination a Host 
  in that Cluster or a Resource Pool owned by a stanalone Host.    
  At line:1 char:8
  + Move-VM <<<<  -VM $vm -Destination $ResourcePool -Confirm:$false
      + CategoryInfo          : InvalidArgument: (Flis:ResourcePoolImpl) [Move-VM], VimException
      + FullyQualifiedErrorId : Client20_VmHostServiceImpl_MoveVm_ResourcePoolOwnedByCluster,VMware.VimAutomation.ViCore.Cmdlets.Commands.MoveVM

  I'm trying to migrate VMS from one cluster to another cluster.

  I can perform this migration of vsphere, but not through powercli.

  Best regards

  The first shot must also have a data store setting.

  Move-VM -VM $vm -Destination $NewHost -Datastore $ds -Confirm:$falseMove-VM -VM $vm -Destination $ResourcePool -Confirm:$false
  

  Unless your data warehouses are shared between the 2 groups and you intend to keep these warehouses of data with the new cluster.

• I want to move a program from one hard disk to another is possible?

  I want to move a program from one hard disk to another is possible? I have the original disc to the software, but it is damaged. The hard disk that contains the program barely works, so I need to transfer all the programs and data to another drive. I used the transfer Assistant, but that will not transfer this program?

  Unless you make an exact copy of the installation CD, I'm not sure there is much else you can do.

  You can always try using a cloth and wipe the disc from the Center outward. That might do the trick. Or you can use a program like IMGBurn and create a new CD and hope for the best. Other than that, I'm ideas.

  IMGBurn:

  http://www.ImgBurn.com/

• BSOD after copying the large number of files from one disk to another

  Hello. I hope you can help because this issue is very frustrating. Just built a new PC:
  -Gigabyte Z97X Gaming 7 mobo
  -8 GB Corsair vengeance 1866 mhz
  -EVGA GTX 770 video
  -CPU Intel 4770K
  -two hard drives of 1 TB WD black in RAID 1
  -one ADATA 256 Gb SSD as drive OS
  -a 1 TB drive Toshiba
  -Windows 7 64-bit professional
  -F3 Bios Rev

  System can work very well for everyday, but when I copy large number of files from one disk to another (i.e. 70 000 files, 80 GB), shortly after (10 to 30 minutes), I get a BSOD bugcheck.

  I ran MEMTEST86 for hours without error. I can run PRIME95 with max heat without error. And as I said, it seems to be fine until I do a copy of large files. It seems not to matter to this disc, I copy to/from. Start WIndows, I see no activity CHKDISK. Ideas?

  Log name: System
  Source: Microsoft-Windows-WER-SystemErrorReporting
  Date: 25/06/2014 19:55:50
  Event ID: 1001
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Daddys-PC
  Description:
  The computer was restarted after a bugcheck.  The bugcheck was: 00000124 0 x (0 x 0000000000000000, 0xfffffa8008788028, 0x00000000bf800000, 0 x 0000000000200401). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 062514-6692-01.
  The event XML:
  
   
     
      1001
      0
      2
      0
      0
      0 x 80000000000000
     
      32358
     
     
      System
      Daddys-PC
     
   
   
      0 x 00000124 (0 x 0000000000000000, 0xfffffa8008788028, 0x00000000bf800000, 0 x 0000000000200401)
      C:\Windows\MEMORY. DMP
      062514-6692-01
   
  

  No problem, thank you!

  All attached files of the DMP are the verification of bug WHEA_UNCORRECTABLE_ERROR (124) .

  A fatal hardware error occurred. This fatal error data error Architecture WHEA (Windows Hardware).

  If we run one! errrec on the 2nd parameter of the bug check (address of the WER structure), we get the following:

  ===============================================================================
  Section 2: x 86 / x 64 MCA
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa8008788138
  Article @ fffffa80087882c0
  Shift: 664
  Length: 264
  Flags: 0x00000000
  Gravity: Fatal

  Error: Internal unclassified (Proc 4 row 1)
  Status: 0xbf80000000200401
  Address: 0x00000000fee00040
  Misc.       : 0 x 0000000000000086

  Internal unclassified error, this implies that it is not publicly documented and there is no way to identify the error.

  -----------------------------------------

  1. AppleCharger.sys is listed and charged, which is the driver GIGABYTE on / off Charge. See here for more information - http://www.gigabyte.us/MicroSite/185/on-off-charge.htm

  Very annoying software, so please uninstall ASAP!

  2 remove and replace Norton with Microsoft Security Essentials for purposes of troubleshooting temporary, as it can be at the origin of the conflict:

  Removal of Norton- https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us;JSESSIONID=841A6D40BA6872C47697C6C6B19C8E11.4?entsrc=redirect_pubweb&PVID=f-home

  -MSE http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  3 uninstall Gigabyte Saver Easy, Easy Tune, as well as all the another bloatware Gigabyte, it is very problematic.

  4.

  2: kd > lmvm marvinbus64
  start end module name
  fffff880' 04c 51000 fffff880'04 c 95000 MarvinBus64 (postponed)
  Image path: \SystemRoot\system32\DRIVERS\MarvinBus64.sys
  Image name: MarvinBus64.sys
  Timestamp: Fri Sep 23 17:17:03 2005

  Pinnacle Studio Marvin Bus driver, dated 2005. Too old to work with the operating system, so please delete the software + the device (if any).

  5 please remove your Rainbow Tech/SafeNet USB security device if there is no update for its software, device drivers are too old.

  -----------------------------------------

  If all else fails, there's only so much you can do with an error like this, checking until it boils down to a faulty processor that needs to be replaced. Start from 1 and work down:

  1. make sure your temperatures are the norm and nothing is overheating. You can use a program such as Speccy if you want to monitor the time - http://www.piriform.com/speccy

  2 clear your CMOS (or optimized load BIOS default) to ensure that there is no parameter incorrect BIOS - http://pcsupport.about.com/od/fixtheproblem/tp/clearcmos.htm

  3. make sure that your BIOS is up to date.

  4 if all else fails, the only one left to do is replace your CPU because it is defective.

  Kind regards

  Patrick

• can I copy the file .iso from window of a disk to another drive and can copied .iso file of window to be used to make bootable USB key?

  can I copy the file .iso from window of a disk to another drive and can copied .iso file of window to be used to make bootable USB key?

  I have the iso image of the window, and I want to copy the iso file on my hard drive for pen drive to make the bootable USB key in the future. So I want to know that can copied .iso file of window et to make the bootable USB key?

  Discussions were merged.

  Deleted duplicate.

  Hello

  This should help you.

  How to create an Installation USB Flash Drive with an ISO file:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  See you soon.

• Fashion trend for a cluster group

  Hi all

  I want to do a trend display for the variation in the number of virtual machines in a cluster group. I created the group, the problem is that the number of VM metrics is not applicable to a group and I created a great metric for it, but it does not have historical data.

  Do you have any idea how to show the parameters of a cluster for many clusters?

  Thank you.

  Looks like the great metric that you created is the best way to do it.  Unfortunately, as you say it do not display historical data from before it was created.  It is only being calculated from that time.  I can think of a couple of alternatives, but I don't think those are exactly what you want.  You can use a list view to display multiple clusters with the Min, Max and last values over a period of time, with a total of lines at the bottom to show/compare the totals for all clusters.  If you are really looking for a chart, you can use the metric graph widget on a dashboard to show multiple clusters at the same time.  There are buttons on the widget toolbar to divide or stack the cards so you can have all the clusters in the same chart, but it will not give you the total for all groups like the metric super.

• I want to copy my lightroom catalog and photos of the hard disk to another.

  I want to copy my lightroom catalog and photos of the hard disk to another. I tried to use the copy and paste, but when I try to open the catalog on my laptop lightrooom cannot find the photos because he is always looking for them on the old hard drive. How can I get lightroom to get on the new drive? When I try to manually connect the photos they disappear just from any folder, they are in Lightroom.

  Hi Mike Nature.

  Greetings.

  As you have already moved the catalog and the files on the hard disk up, visit this link on how to find missing images/files

  • https://helpx.Adobe.com/Lightroom/help/locate-missing-photos.html

  I suggest you look for missing files.

  The images do not disappear, but after the relining, they should be available under the new hard drive.

  Concerning

  Rohit

• How to move the virtual machine from one cluster to another cluster

  How to move the virtual machine from one cluster to another cluster

  If two Clusters are in the same data center, you could do a 'live' migration or vMotion, if that's the case.   If the virtual machine is turned off, it may be migrated regardless of the data center.

• Move ROW with dynamic disk to another virtual machine

  Hello

  I'm in a situation where I have to leave my RDM Win2003 VM to win2008, but the complexity and multiple physical RDMs here make only dynamic partition (RDM1 1.5 TB, RDM2 1.5 TB, is drive G RDM3 1 TB 4 TB),

  Now my question is if I can move this partition of G (which includes 3 disks RDM) again an another VM (win2008)

  Thanks, SD

  Hello

  This does not resemble a specific question VMware.  On the contrary, seems like a question of Microsoft Windows.  Just make sure the hosts on which the virtual machine of 2008 runs can see the same ROW and follow this procedure to remove dynamic disks of the virtual machine of 2003 and add them to the virtual machine of 2008.

  Move disks to another computer

  All the best,

  Mike

  -----------------------------------------

  Remember to mark this reply 'proper' or 'useful', if you found it useful.

  Mike Brown

  NetApp, VMware and Cisco data center guy

  Consultant engineer

  [email protected]

  Twitter: @VirtuallyMikeB

  Blog: http://VirtuallyMikeBrown.com

  LinkedIn: http://LinkedIn.com/in/michaelbbrown

• Move vc db server to another cluster

  I need to move my VC DB server to another cluster (VC is on another server, it is simply running SQL).  Cluster processors are incompatible so migration won't work.  I think that using the converter would be the way to go.  How I got on moving the virtual machine?  I have to install the converter locally on the virtual machine and to do a conversion with the target server as a host in the cluster of others?

  All systems are vSphere 4.1

  Thank you

  Mike

  Yes, sometimes I seem more complicated things simple.  Assuming that you have shared storage between the host ESX (i) source and destination ESX (i), which will be a very quick and easy solution.

• The loss of the right to vote disk hogging the Cluster?

  Version: 10.2.0.1 and superior
  
  The loss/corruption of the voting disk hogging the cluster?

  That's right (for<>

• ORA-29702: an error has occurred in the operation of Service of Cluster Group

  Hello
  
  After closing down a knot trying unsuccessfully at the start of this node:
  
  SQL > startup
  ORA-29702: an error has occurred in the operation of Service of Cluster Group
  
  I got this message.
  
  Here is a log of file: orcl2_lmon_13886.trc
  
  */Oracle/admin/ORCL/bdump/orcl2_lmon_13886.TRC*
  Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64 bit Production
  With the options of partitioning, Real Application Clusters and Data Mining
  ORACLE_HOME = / oracle/DB
  Name of the system: Linux
  Name of the node: DB2
  News Release: 2.6.18 - 53.el5
  Version: #1 SMP Wed Oct 10 16:34:19 EDT 2007
  Machine: x86_64
  Instance name: orcl2
  Redo thread mounted by this instance: 0 < none >
  Oracle process number: 5
  The Unix process PID: 13886, image: oracle@DB2 (MON)
  
  :() 2008-12-19 10:08:26.214 SERVICE NAME *.
  SESSION ID: (1102.1) 2008-12-19 10:08:26.214 *.
  21522 GHG 8 resource pool
  GHG enqueues 33158
  GES CPI: Receivers 3 shippers 3
  GES CPI: Buffers receive 1000 Send (i: 2750 b:1934) reserve 1000
  GES CPI: Msg 408 lot 8192 regular size
  Factor of batch processing: enqueue replay ack 201, 224
  Factor of batch processing: cache size 126 by 64 lock replay
  kjxggin: receive buffer size = 32768
  clsc_connect: (0x1d19a030) no listener to (ADDRESS = (PROTOCOL = ipc) (KEY = OCSSD_LL_db2_crs))
  * 2008-12-19 10:08:29.819: CSSCLNTclsssInitNative: connection failed, rc 9 *.
  kgxgncin: SATC init failed with status 3
  kjxgmin: kgxgncin failed - (2)
  kjxggin: generic group layer init fails
  2008-12-19 10:08:29.819 *.
  Stopping the queue Service global
  2008-12-19 10:08:29.820 *.
  enqueue global service detach CM:pid = 13886
  
  I did check the listener, it didn't work, but I start it:
  
  LSNRCTL > status
  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
  STATUS of the LISTENER
  Alias LISTENER
  Version TNSLSNR for Linux: release 10.2.0.3.0 - Production
  Start date December 19, 2008 10:49:42
  Uptime 0 days 0 h 3 min 55 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP ON
  Parameter Listener of the /oracle/DB/network/admin/listener.ora file
  The listener log file /Oracle/DB/network/log/listener.log
  Summary of endpoints listening...
  * (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=localhost.localdomain) (PORT = 1521))) *.
  The listener supports no services
  The command completed successfully
  LSNRCTL >
  
  Could you give me a guide how to start this node? or where is a problem?

  Before the start of the database, you can, you must start the CRS.

• How ASM manages disk failure

  Hello

  Would by document Oracle ASM and stumbled on this subject need to shed some light on this please.

  "Disks are first taken offline and then automatically deleted. In this case, the disk group remains mounted and fit for service. In addition, due to mirroring, all data from disk is accessible. After the decline of disk, Oracle ASM operation performs a rebalancing to restore full redundancy of data on defective discs".".   -What it means?

  Thank you

  Redundancy of the DSO is basic ability and not founded as RAID 1 mirror disk. ASM does not duplicate records. When a drive is removed due to a permanent failure, ASM will begin to rebalance and copy data that is necessary to maintain the data redundancy on the remaining disks within a group of disk failure. It will also attempt to evenly distribute the data on multiple devices.