Aspire 5552 laptop cant restore as CD-Rom drive does not now

Similar Questions

• CD/DVD-Rom drive does not not on Equium A100

  I installed a webcam, and it made my DVD - rom drive does not not with all drives. I uninstalled everything to do with the webcam and it still does not work. Can someone help me solve this problem without using the recovery disk of the product came with my laptop?

  I had this problem before, but I didn't the first time, it's the webcam that has caused the problem. It s webcam trust wb - 1400T. I had to use the product recovery disc and he had a lot of hassle to install all my programs again and this time I'm in the middle of exams and can't get it all done in time for my exams, as I have vital work on here I have to do.

  .. .Please help me... I think it is the driver, but I don't know how to fix it.

  Hi mate

  > I installed a webcam, and it made my DVD - rom drive does not not with all drives
  To be honest I have never seen that the webcam may have a negative influence on the internal CD/DVD drive.
  I see really no connection between the webcam and ODD... very strange
  Do you get any error messages?

  Anyway, in my opinion, you should try these solution ideas;

  (1) remove the drive from the Device Manager CD/DVD and restart the laptop. After restarting again the operating system should recognize the STRANGE and should re-install the drivers.

  2) access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  .. then restart the laptop.

  (3) download and install the tool freeware "CCleaner". This tool repairs registry and solves several problems in System.

  If this does not work, then the new installation of the OS would be wise to check if the problem could be related to a software problem.

  Best regards

• P50-A-144 satellite: the CD-ROM/DVD-ROM drive does not

  Version of Windows 10 Home 1607 (Build 14393.187)

  Hello

  After Windows Update Version 1511 1607, the CD-ROM/DVD-ROM drive does not work.
  The D: drive does not appear in Windows Explorer,
  CD-Audios and videos / DVDs do not work.

  In the Device Manager, the following legacy status error message appear:
  "Windows cannot start this hardware device because its configuration information.
  (in the registry) is incomplete or damaged. (Code 19). »

  Could you tell me how to solve this problem?
  Thank you.

  The solution was to uninstall the program "Toshiba Recovery Media Creator' and system settings/Programm features.
  I still don't understand why, but the fact is that after uninstalling the CD-ROM/DVD-ROM start normal work.

  More information here:
  http://www.borncity.com/blog/2007/08...-verschwunden/

• DVD - Rom drive does not

  I just had my Dell Inspiron 1318 in the shop for service, and when she came back I had to reinstall a lot of my old software.

  The Sony Optiarc DVD +-RW AD - 7640A DVD - ROM drive in my computer didn't have to be replaced at the shop and worked well for the first hours of operation of the system. I had reinstalled Office ' 03 and Roxio DVD burning software and it would try to install something else when the drive has stopped working.

  I also run updates of the system before you attempt the installation of Office 2003, etcetera.

  When I insert a disc in the drive, it produces noises as if she is trying to run or to read the CD before ejecting again.

  I am running Windows Vista Home Premium with Service Pack 2, almost completely updated.

  I tried a system restore to the last point of operation disc drive, and then I tried to update my drivers. When he said that I had the more recent/better driver, I uninstalled the device and rebooted. Finally, I tried the Mr. Fix - it on the Microsoft Web site. Nothing has worked.

  Anyone happen to know what is the problem? I need to have this drive works in short order and I really do not have to return the system to the shop for repairs more literally the day after getting it.

  Hello

  The Roxio probably malfunctioning filters and if so the 1st steps here that will correct.
  If they do not solve the problem, then work your way through the rest as needed.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• CD-ROM drive does not open

  Separated from this thread.

  How can I open a disc in my drive, but does not open on my screen?

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  These are the keys in my opinion, are those in question - secondary-keys for the CD/DVD drive of course because there will be other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• CD-ROM/DVD-ROM drive does not work. Device Manager indicates problem and there is no volume listed on the Volumes, how to fix tab?

  Description of the drive is HL-DT-STDVD +-RW GSA - T11N ATA Device Properties. Verified drivers and they are up to date.  Under device status "this device cannot start. (Code 10) clicked on search the Solutions, but no solutions are shown.  Have trouble with the DVD because I had the computer and have had several conversations with Dell but I think that my extended warranty just expired.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• External Combo CD-RW/DVD-ROM drive does not work with USB 1.1

  Hello world

  I have a problem with the PA3352E - 2 CD 2 CD-RW/DVD COMBO USB 2.0. A colleague is owner of this car and use it on a NB DellC610 with Windows XP on it. The problem is that the drive does not work with this type of nb (with a NB from Fujitsu-Siemens newest there no problems); There is always an error message about "surge." I think it has to do with the USB 1.1 because the player seems to be built for USB2.0. Is it possible to use this drive correctly with usb1.1 (ok, the flow is low, but more important is it works in general)? Unfortunately his nb will not work with USB 2.0...

  Thank you very much in advance.

  Kind regards
  Steffen Rieger

  Hello

  AFAIK this external must have a power adapter. You use it too? I'm not 100% sure, but there are difference how much power Gets the USB slot. Toshiba notebooks is around 500 my and some producers another laptops send between 300 and 500 my. The external device requires approximately 700 my.

• CD-ROM drive does not all discs.

  Well, today I bought a new wireless router, and I had run the installation wizard. I opened the CD-ROM drive, insert the disc, and then closed and waited. After a few minutes, nothing. I opened and closed several times and still nothing. I put another disc and it does not read or the other.

  Can someone explain why the drive is not working or read all disks? I spent $70 on the router.

  The drive does not has nothing to do with the router. You are able to read one of your usual cd? Have you tried a cd lens cleaner? If it will read something other than the disk, there is a lack of drive (in this case, sigh...) or other Setup has detected and blocked the autorun and the setup.exe for some reason any. This you can check click with the right button on the device and choosing 'Explorer' and not 'open '. If it shows you the files on the disk, right-click on the setup.exe file, click Properties, and make sure that you have permissions to run the program under the Security tab. In addition, the first of the properties tabs will specify if windows has blocked the executable to start and will give you the possibility to activate or enable it via the checkbox. "THE BEST THING TO DO IN THIS WORLD IS A WRONG ANSWER! "I"DON'T"WINDOWS...". »

• CD-ROM drive does not work after installing a new game

  Problem with CD-ROM!

  Hello, before a few months my cd-rom doesn't work properly, one of these days, I decided to install the new game, and it shows that my cd-rom will not read the disc!
  OK, I thought: Maby the cd is damaged in anyway so I'll put another cd to see if the problem persists, I had a new cd empty and rolled on the cd-rom and waited but nothing showed... I searched some tips on this problem and here's what I did:
  1. clean the pc with Malwarebytes Anti-Malware and Norton.
  2. re-installed CD-ROM drive (HL-DT-ST DVDRAM GT30N)
  3 downloaded Fixit and troubleshooted CD with it, it says that the disc was not readable, anyway I know it's readable!
  4. download CDCheck and checked the E: pilot, it is what comes out of http://img253.imageshack.us/img253/8175/48433351.jpg

  I don't know what to do next, but after trying it, I think it's a hardware problem.
  If this can help I am running Windows 7 Home premium x 64 on a laptop.
  What can I do to fix this?

  Hi Sergio,

  I suggest you try the steps in the Microsoft article and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Registry warning:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Let us know the results.

• Satellite M30X: DVD/CD rom drive does not work

  Hello
  I hope someone can help. The reader above will not now recognize any media inserted. He snores for awhile then stops. I cleaned the lens and cross also support and diagnostic tests and they cannot me more help.

  I also reinstalled the driver but no joy.
  This means a new DVD/cd drive is necessary?
  It is removable of the laptop and easily replaceable?
  Where I would get the part - M * a DVD ROM UJ-82OS?

  How much would it cost?

  Thank you all for your suggestions?

  Jim

  This looks like a simple material defect
  So what is the solution? I do think that a replacement device

  I think that different readers are compatible with this laptop. So I can t give you and advice how much it costs but the best answer you'll get the Toshiba service partner in your country

  But the slim laptop drives are usually a little more expensive than shared drives for desktop computers

• HP laptop - 15-r114ne: VGA and USB Driver does not

  Hello

  My newly purchased HP for laptop - 15-r114ne can't see the devices connected via the USB Ports. I do not see the load connected wih on my android phone, but I can't access the device.

  Then the screen brightness is not reduced; It is very difficult for me to spend an hour on this system.

  I tried the Intel graphics driver high definition (HD), but it does not work.

  Urget help please

  Hello:

  See that if these graphs and USB3 pilots work... the first file on the left is auto installation of the file.

  https://Downloadcenter.Intel.com/download/24973/Intel-HD-graphics-driver-for-Windows-7-8-8-1-64-bit

  USB3: Download, unzip and run the setup.exe file...

  https://Downloadcenter.Intel.com/download/25687/USB-3-0-Intel-USB-3-0-driver-for-NUC6i-x-Sy

• DVD Rom drive does not open when I try to eject a disc

  Original title: dvd rom

  HI.i can open rom.i push to eject dvd but dvd rom not the open.can help me.

  Hello

  1 is this blink when you press the button to eject the CD/DVD drive?

  2. is there the CD/DVD in the CD/DVD drive?

  3 did you changes to the computer before the show?

  4. don't be the CD/DVD drive not detected in the Explorer(My computer) Windows?

  If the led does not illuminate, the reader is disconnected or broken. In this case, you may need to contact the manufacturer of the mounting of the CD/DVD drive system.

  If the led does not blink, you can try the following:

  (a) open my computer

  (b) right click on the CD/DVD drive

  (c) click on Eject and check if the CD/DVD drive eject

• CD rom drive does not work and does not appear.

  My cd rom drive not only disappeared from "my computer", it's also not read what I put in. When I find under device manager and open it it shows nothing in the drive. I ran a Microsoft Web site diagnostic test and he said: she could not solve the problem and has only offered no other information. My drive is NEC DVD + RW ND - 6650A

  Hello

  Please refer to the link below regarding CD/DVD players missing. :-)

  http://support.Microsoft.com/kb/982116

• CD-ROM drive does not mechanically

  My CD drive won't open when I push the button. Is it possible to open it with a command to the computer?

  Hello

  To add to the advice of Fixer Upper:

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• My dvd/cd rom drive does not open

  I looked for mechanical problems, I've updated the driver, I tried manually open (press the Open button), I tried to use the computer to open, but all without success. This has happened as my computer starts does not sometimes after it has been switched off.

  Hello

  Try using a tip of a paper clip to open the tray.

  "How to create a trombone in car opener.

  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  "CD-ROM, DVD or other drawer not open."

  http://www.computerhope.com/issues/ch000214.htm

  See you soon.