Aspire installation Ubuntu V3 - 772 g problem

Similar Questions

• Installation of Win 7 USB problem reboot s10-2

  I did successfully my usb boot with win 7 on it. It also starts the windows installation. BUT THE ARISES PROBLEM WHEN THE SYSTEM IS RESTART FIRST TIME (after a few necessary files copy) it STARTS again ON THE DISK USB AND ALL PROCESS BEGINS once AGAIN (IN A LOOP AGAIN AND AGAIN)... But if I eject the usb drive it gives an error. HELP PLZ...

  He asks you to press the keys. If it starts on your USB drive when it is inserted, it means its default configuration in the BIOS at startup of the removable drive, click hard disk if the removable drive is not present.

  To do this. As soon as it starts, hold down the button F2 repeatedly until he catches and brings you to the BIOS. From there, set the boot order to boot from your hard drive first. Save and exit. It will restart and all the lights will be turned off. As soon as the lights go on again, hold on to the Fn key while pressing the F11 several times. If you do it right, the start menu appears, select start from your USB key. It will then start to your flash drive and windows 7 will begin the installation. The next time that it restarts, you need not to do anything about it either, since it will now reboot your Windows HD will continue to install. When it's done, it will charge the second time and the bureau will appear.

• Aspire driver v3 - 772 g problems

  Hello

  You just bought an Acer Aspire v3 - 772 g (8 GB of RAM, GTX 760 M Nvidia GPU) without OS.

  Installed Win 8 & all drivers. Was working fine until I upgraded my BIOS in 1,05 to 1.11. Was a stupid mistake. Now my laptop get a BSD every 5 minutes or more. Not able to work at all. Several times tried reinstaling & drivers windows

  The main problem seems to be the Intel VGA drivers. The problems begin as soon as I install the VGA drivers downloaded from ACER. When I install the generic Intel HD 4600 drivers from Intel, the BSD are reduced but not eliminated. But the light flashes a lot where I get eye strain.

  When I turn off the graphics card Intel HD 4600 of the control panel all seem to be stable. But then the laptop is more as useful as a chormebook.

  Someone knows a solution? In some forum I saw this demotion to 1.08 BIOS sloves the problem. But don't know if I should attempt it.

  I also read in other forums that many have problems with V3 - 772 G. May be I would return the laptop one get another brand.

  Concerning

  Sri

  Solved *.

  I've downgraded to version 1.08 of the BIOS. Required a quite a bit of courage to do it on a laptop brand new. But the laptop runs as smooth as ice, and runs continuously for 6 hours without any BSOD or the screen flickers. Installed lots of software and play games too.

  So far not a single problem.

  For all those who think of a BIOS upgrade.

  1. never upgrade BIOS if your system works well.

  2 first create recovery media.

  3 create custom images to preserve your applications (use recimg. Google for help). If possible, store the image in a different patition.

• Serious teething problems (problems of ubuntu-windows, hard disk problems boot loader)

  I have a laptop ASUS K50IN with recovery partition windows preinstalled on the hard disk (Windows 7, Home Premium edition, 64 - bit).

  I formatted the entire hard drive with Lubuntu installation dvd, I used Lubuntu, for a few weeks with success.
  (I used a removable drive for installation.)
  After that, I wanted to do a dual-boot system (windows-ubuntu).
  I deleted the windows install Summary Lubuntu with recovery partition, so I downloaded a version of Windows 7 Home Premium 64 - bit and burned to dvd (I have my product key from the back of the machine). Downloaded from: msft.digitalrivercontent.net.
  I deleted the partitions lubuntu until windows install with windows dvd, made a partition for windows (with the 100 MB system reserved required),
  and began the installation process which took place successfully, but it failed to restart after the installation. As much as I remember came problems.
  I had a few bad boots, but I managed to run the new windows 7, made some configurations, programs installed on it. I always have problems with reboots. (It was stable when I have manged to get into windows itself.)
  I searched the net and found that ubuntu uses grab as boot loader, and it isn't getting deleted with the simple formatting even with a windows installation.
  I tried to repair the boot loader of windows to the Master Boot Record by running the command from the windows installation disk prompt (many tries to start).
  I tried these commands unsuccessfully:
  /fixmbr Bootrec.exe,
  /FixBoot Bootrec.exe,
  /RebuildBcd Bootrec.exe,

  (by the way these commands responded succession of repair)

  Bootsect/nt60 SYS/MBR,
  list not found no operating system compatible hits.

  (Auto repair could not fix problem.)

  Then I used DBAN to completely wipe my drive.
  I used the values in interactive mode (PRNG:mersenne twister, method: DoD short, collar to check: last).
  Ran for 9 hours, crushed 3 times, has completed successfully without errors.
  I read that it removes the MBR sector too.
  I tried to start the windows installation disc, and it shut my computer when it arrives at the end of the second bar with "WINDOWS IS LOADING of FILES.
  Same problem with the installation of ubuntu dvd.

  Same problem with the DBAN disk.

  Same problem when booting from the hard drive.

  Keeps turning itself off in unpredictable ways. Sometimes, I managed to get in installation disc menus, then comes the turn off.

  Above all it stops early in the boot process.

  Hello fatou,.

  Thank you for giving us the opportunity to help you. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem.

  As you have tried almost all the troubleshooting steps, and if the problem persists always try to follow the provided suggestion in the following documentation of Ubuntu and see if it helps.

  WindowsDualBoot .

  You can also consult the steps described in the following Microsoft article and see if it helps.

  Install multiple operating systems

  If the problem persists, I ask come you into contact with the your computer manufacturer (ASUS().

  Keep us updated on the issue and we will be happy to help you if necessary.

  Kind regards.

• editing 4 TB ubuntu vm external drive problem

  Hello world

  My 2 TB My Book western digital external drive died after a small bump of my elbow. I bought a new, 4to. I have it plugged into my computer (Ubuntu 13.04 the host 64-bit), and it seemed ok - until I tried to connect it to my virtual machines, where I need for the most part - and it simply does not work. I have a 64 bit 13.04 Ubuntu machine and 4 new cases of tuberculosis is not recognized. In ubuntu it simply does not show, no message, nothing. I'm getting desperate with all my WD drives giving these problems - I have thought about trying to mount the disk manually on my ubuntu vm. The former 2 TB drive that I had used to automount with no problems. And it installs ok in the host, so I don't understand why it does not show in the virtual machine. Someone suggested to me that maybe the problem is the size of 4 TB - is this a problem with vmware? If so, what is the solution? It cannot be a linux problem because on the host computer, it works well. Any other suggestions, what could be the problem, that I could try to do?

  Thanks in advance,

  LinuxG1rl

  > My workstation is 8.0.6 - this means that it only is not supported for usb 3?

  Sounds like it. My USB 3.0 controller (add-on) only works if I select 3.0 in the virtual machine settings. If I didn't, it recognizes the device is plugged in, but cannot load a driver (and displays a dialog box saying).

  This on a Ubuntu VM, running on a host of Mint. I can use it via the connection to the host.

  You have 2.0 ports on your host?

  Lou

• Installation of Sierra of macOS problems

  I downloaded the software of the day the software out and I tried to install it.

  I use a Macbook 2012 mid pro running El captain.

  Installation of macOs Sierra hung. I checked online that there was a way to see the progress of the installation by typing Command-P and I did but my macbook pro kernel panicked and rebooted and it was happening in loop.

  I called support apple customer and tried the following steps:

  1. I went into recovery and verified mode hard drive.

  2. in recovery, I tried the option "Reinstall macOS Sierra.

  3. I have reset the PRAM and the SMC

  and in the end after all that, I restored my macbook pro from a Time Machine backup.

  At first, I thought that it might be a problem of material, like the RAM, but the computer started beautifully after that I restored it to El captain.

  Then I thought that it could be the software so I re-uploaded it tried to install it again. Same question. Kernel panic and the loop.

  If anyone has any fix for this please tell me that I really don't want to use macOS Sierra

  Hello Aniket8880,

  Thank you for your question on the kernel panics and upgrade to Sierra on your Mac. We love never heard of problems with the updates or upgrades. I want to offer another method for updating your computer on Sierra.

  The first thing we want is that all your data on a Mac is safe and that you have a recent Time Machine backup. Once you have confirmed your backup, we want to format your drive and reinstall the current operating system, and then try to upgrade to Sierra without any of your personal data on the computer. We need to try it because the information in this article help: OS x: when your computer restarts spontaneously or poster "your computer restarted because of a problem." says that if your Mac restarts unexpectedly, known as a "kernel panic" error. After the reboot, you will see a message that your computer has restarted because of a problem. The most likely cause is a faulty software. A kernel panic can also be caused by damaged or incompatible, hardware including external devices attached to your Mac.

  Before you erase your hard drive, make sure that the license for the El Capitan is connected to your Apple ID. If you went into the App Store to download and install El Capitan with your Apple ID, while the license is here. To check, please open the App Store, and then click purchase. Make sure you see OX S El Capitan in the list. If you do not, look for OS X El Capitan and click on 'Get' to attach it to your Apple ID. You even don't need to let him complete the download at the moment. Once you know the El Capitan license is attached to your Apple ID, please open this help article: How to reinstall OS X. See the section titled "If you sell or give away your Mac» We use this section steps because we want to completely erase the hard drive, as explained above. Then, reinstall the current operating system on the Mac, which is the number of step 3.

  Once you restart the Mac, it will look new as when unzip you it in the first box. Set up your account, but don't restore all personal data from the backup disk yet. Once your account is set up and you can access your desktop, go ahead and reopen the App Store. Search for Sierra and download and install it now.

  If the installation finishes successfully, and you can start up to the account you made, we recover your data from the backups that you made. Because the backup is in an operating system that is older than what is on the computer now, you will need to use the Migration Wizard to retrieve the data. This Help article will help you with this: move your content to a new Mac. We can say that the accounts are the same; or there may be an alert, you must check before you do. or it will ask to replace the account, make a new account, or merge the data. I recommend you make a new account. This way if you have a kernel panic when you try to start the account that had the backup, but do not know the question when you start in the new account that you created, we will know that there is a problem with your backup data.

  Thanks again and have a great rest of your day.

• I've just updated TB I was running two clients installation 1 now have server problems

  I run two clients TB since an installation - never had any problems. I've just updated to 24.4.0 and one of these installed works fine, the other will not receive or send e-mails. I get the following error.

  The message send failed.
  The message cannot be sent because the connection to the SMTP server mail.just - 2bme.com failed. The server is may be unavailable or refuses the SMTP connections. Please check that your SMTP server settings are correct and try again or contact the server administrator.

  Any SMTP server I use - I have 4 that (usually) work, no matter which I use I have the same problem. I can use the same SMTP server to send the other as the other install - install works, this one isn't. VERY STRANGE.

  connectivity immediately after an update issues are generally anti too cautious anti-virus programs and blocking everything in this new unknown.

• Hypernating Ubuntu 8.1 + suspend problems on satellite A300-15 has

  I got a Satelite A300-15A and I installed the top Ubuntu operating system. But every time that I put it to suspend or hypernate, it starts again.
  When I press the power button I get a black screen with glitch (green stripes on top)

  Any ideas on how to fix it?

  Hello

  It is not easy to offer a solution to this. Satellite A300 is not supported with this problem and Linux, you're on your own.
  Check some Ubuntu forum. You're more likely to get good advice there.

  Otherwise, if Ubuntu works well you should be happy about it. This little problem shouldn't be that important to you.

• On Satellite L30-134 and Ubuntu Linux audio driver problem

  Hello!

  I have install ubuntu edgy (and plan to upgrade to fiesty) on my new laptop L30. Everything seems to work smoothly, but the sound is available only from built-in speakers.

  Then, I updated the BIOS to the new version of (2.30) and now I can hear the sound of phones Jack, but speakers remain silent (even if nothing is connected to the Jack).

  Is there a solution near here?

  Hello

  If nobody can offer you the solution to this problem trying to please check websites to follow:
  http://newsletter.toshiba-tro.de/main/index.html
  http://Linux.Toshiba-DME.co.jp/Linux/index.htm
  http://www.Linux-laptop.NET/Toshiba.html

  Maybe you can find some info there.

• Dv4-1281us and Ubuntu 10.10 battery problem

  I recently installed Ubuntu 10.10 on my DV4-1281us and he does very well with one exception. When I shut down the computer completely, my battery is always fulfilling at a rapid pace, as if there still can be sent to radio or other ports. I have a failry 12 stack new and it drains as much as %20 from one day to the next. He has never had this problem with Vista. Any input?

  I'm tired of trying to understand so last night I've ignored it and installed Linux Mint Debian Edition. So far, it works better that Ubuntu has ever made. Tonight, I'll know how the battery behaves. I hope that solves the problem.

• Install Ubuntu with Windows 10 problems.

  Hello

  I had problems trying to install Ubuntu with Windows 10 (and Linux Mint also has problems). When I try to mount my hard drive (with 10 Windows on it), it says that Windows is put into hibernation. I want to install Ubuntu with Windows and not to clean install. Ubuntu detects my external hard drive and said: «There are currently no operating system installed...» ', but it does not detect my hard drive with Windows 10 on it.

  Thanks for any help,

  DaComputer Guy

  Sometimes, when the quick start is activated, it can cause Linux to correctly identify the Windows partition as being in the State of hibernation. Try to disable the quick start and see if it solves the problem:

  1. open the Control Paneland turn the mode icons

  2. in the list, go to Power Options

  3. in the left pane, click choose the power buttons what

  4. scroll down and uncheck the Quick start

  

• HP LaserJet CM1415fnw: Complete Installation HP LaserJet CM1415fnw software problem

  Complete software will not install.

  Installation with Debug errors or cancel.  If I debug with Visual Studio 2015, this is the exception:

  System.TypeInitializationException was unhandled
  Message: An unhandled type "System.TypeInitializationException" exception occurred in hpbcsiCommonTools.dll
  Additional information: the initializer for type for 'Microsoft.Practices.EnterpriseLibrary.Logging.Logger' threw an exception.

  I would never create a package of bulk products with Enterprise Library.  It is asking trouble, especially on a developer machine.  I don't know that I have a package of Microsoft that uses a later version, or something screwing of the machine.config file.

  Hey @JWStevens,

  Welcome to the Forum from HP Support.

  I see that you are unable to install the drivers for your HP LaserJet Pro CM1415fnw Color MFP.  I would like to work with you on this.  I have some suggestions that could lead to a viable configuration.

  Try the following steps:

  Clear the Temp folder:

  1. Open the run box by pressing the Windows + R keys'.  In the box that opens type %temp% , and then press enter.
  2. When the Temp folder opens, select Ctrl + A at the same time on your keyboard
  3. Once everything is highlighted in the Temp folder select "delete" on your keyboard to delete the files in the Temp folder. No files and folders on your computer will be deleted. This only deletes temporary files. If a file is always be used by a program on your computer, you'll be up the pop to 'jump' the item.
  4. Once the temporary files are deleted to close the window
  5. On your desktop, right click on the recycling bin and select empty recycling bin

  Then, run Microsoft Fix it.  Click here to install.  This utility could solve the problem of the installation.  I also suggest upgrading the firmware of the printer.  Connect your printer to your PC via usb (if possible), and then click here to complete the update of the firmware.

  If none of these steps help, you can do a selective startup upward on your PC working directly with MSCONFIG to try to determine what, if a Windows service or program is interfering with your ability to install the drivers.  Here's how:

  1. Click on the Start menu
  2. In the box "search programs and files" just above start, type msconfig and press enter on your keyboard
  3. When the System Configuration window opens, click on 'Selective startup' and uncheck Load Startup items
  4. Click on the tab Services , check the box at the bottom to hide all Microsoft Services
  5. Select disable all
  6. Select apply and OK
  7. Computer restart when prompted

  Once you restart, try the install again.  If you are able to complete the installation, we can assume there is a background program, or a service on your computer is blocking the installation. You will need to activate a service at the same time on your computer to find the program that is blocking your printer to print.

  Here's how to cancel the above MSCONFIG:

  1. Click the Start icon.
  2. In the box "search programs and files" just above start, type msconfig and press enter on your keyboard
  3. When the System Configuration window opens, click "Normal startup"
  4. Click apply and OK
  5. Computer restart as prompted.

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• Hi there I have an acer aspire one and I have a problem with my wireless connection.

  Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you

  A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.

• Aspire V5 and display Windows 7 problem

  Hello.
  I have a problem with an Aspire V5 - irritating 431 which I have just downgraded to Windows 7. To install from a USB key, I changed to UEFI BIOS Legacy and converted to MBR disk. Everything went great initially, Windows installed thin and everything works fine. Except the Intel HD Graphics drivers.
  Whenever I have install the graphics drivers and reboot the screen is all messed up. Everything is distorted and double. Still, the only way to do things is to uninstall the drivers. As long as Windows is running with basic VGA drivers, everything seems fine. But low resolution, of course.
  I tried several different versions of the graphics driver, but they all produce the same question.
  I googled a little and found that I'm not the only one with this problem. Apparently it has something to do with the start safe in the UEFI bios feature.
  I'm going crazy, not being able to install these drivers. What can I do? Looks like a bug to me...
  Any help is greatly appreciated.

  [edited to conform to the guidelines]

  It's a legacy BIOS problem, you can't do much... re - install windows 8.

• Windows Installer error there is a problem with this windows package install. a program run as part of the set up did not complete as expected "during the installation of Itunes

  Original title: problem WIndows Installer to install the latest version of i tunes

  When I try to install the latest I tunes version 10, I get a message "there is a problem with this windows package installer. a program run as part of the set up did not complete as expected "the downloads version, but will not be installed."  How can I fix?  I have an earlier version, but I need to update to use my i pad.

  Hello

  You can try the steps of troubleshooting provided in the link below and check if the problem persists.

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

  To get help on the issue, you can get in touch with support for ITunes.

  http://www.Apple.com/support/iTunes/