Acer aspire e1-572 cd/dvd stopped working

The CD/DVD drive has stopped working. When you insert a disc, normal sounds, but can here a slight ticking, then disk stops not recognized by Windows Explorer. He has worked in the past as the installed disk drivers for the new printer about 6 months ago.

Any ideas please?

mjmuk,

You can contact Acer technical support in your area to see what options are available to you, which probably is to buy a new.

Tags: Acer Laptops

Similar Questions

  • My keyboard for my Acer aspire switch 10 has completely stopped working

    I use my Acer 10 for about six months and had improved to win 10 just now with no problems.  This morning the keyboard stopped working.  I checked the Tablet contacts, clean them with a brush and a cleaning and not restarted, no chance.  The keyboard when it starts allows me to enter the PIN code and I have a USB mouse attached to the keyboard that works, but none of the keys work when I am connected to Windows. If the screen times out and I try to enter the PIN code again, nothing.   I can navigate around using the mouse, but not have the ability to enter information on keyboard.  I'm stumped and would apprecaite any suggestions welcome.  Acer has been great so far?

    I solved the problem!  It turns out it is 10 Windows that caused the problem.  Filter keys were turned on somehow and they disable the keyboard for users with disabilities. I discovered this on another machine when it happened too, but this time a unrecognized icon appeared in my system tray.  The icon has been for these filter keys and when I turned off their keyboard is back.  How this stupid thing got switched on I don't have a clue.  The original pc with the problem did not show a filter key icon in the system tray, so I was puzzled, did not know they existed.  Something for others to check if this is the case for them.  Thanks for your help.

  • Acer Aspire 5515 Crystal Eye Webcam stopped working

    It was working properly when I got the laptop (Windows Vista), but now it doesn't.  I don't know what happened to make it stop.  What should I do?

    Hello

    Try following these methods and see if it helps.

    Method 1:

    Try to run the tool fixit from link and check if it helps.

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/

    Method 2:

    Try to update the drivers of webcam and check.

    a. click the Start button.

    b. in the type devmgmt.msc search box then press ENTER.

    c. Select the audio device and right click on it

    d. now, select Properties.

    d. in the Properties window, on the driver tab, click Update driver .

    e. after the installation of the updates, restart the computer.

    If the above method don't help you solve your problem, contact the manufacturer.

    http://support.Acer.com/default.aspx

    You can consult:

    http://support.Acer.com/us/en/product/default.aspx?tab=1&modelId=1010

    Hope this information is useful.

  • Wireless connection drops after 10-20 seconds on Acer Aspire V3-572 - 56T 3 running Windows 8.1

    I have big problems with the network connection Wireless at the office. He sees the network, allows me to enter security credentials, then connects (with connectivity internet confirmed) but gave up after 10-20 seconds. I tried the wireless network to a friend who worked ok without interruption, is certainly nothing wrong with the hardware. I use a brand new Acer Aspire V3 - 572 - T 56, 3 on Windows 8.1, with all the latest drivers/patches loaded and tried to juggle with many advanced settings for the card of network without success. I connected the router to make sure that all the settings, encryption standards, channels etc was corresponding, but the problem is persistent. It has been going on for two days now and is driving me crazy because I really need to work in the office with wifi band. Plug an ethernet cable directly into the router works fine, but it is not the ideal solution (and poses a danger OH & S that he throws on the ground). Can someone help pleeeease!

    FYI, I ran diagnosis several times & the only thing that stands out was the following:

    Diagnostic information (wireless connectivity)
    The Association status: 0 x 00038002 failure
    Association reason code: 0x00000002

    Result of diagnosis: problem found
    Question: RNWF MSM Helper Class
    Root cause: Windows could not connect to "ERICSSON".
    You can try to connect again.

    Result of diagnosis: problem found

    Root cause:
    Failed to bind wireless to "ERICSSON".
    An answer is not from the router or access point.

    Detailed root cause:
    Failed to bind to this network wireless. Windows has not received response from the router or access point wireless.

    Repair option:
    Search for the causes of the low wireless signal quality
    The signal is weak because of the distance or interference.
    Windows Help and Support can provide more information on this problem.

    No need, already has the solution (which worked for me):

    The fix!
    (This is for windows 8.1)

    THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

    -Right click on the Windows tile in the bottom left of the taskbar.
    -Open Device Manager.
    -Expand "network adapters."
    -Right click on your "Broadcom 802.11n Network Adapter.
    -"Update driver software".
    -"Browse my computer for driver software".

    THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

    -"Let me pick from a list of drivers for devices on my computer.
    Uncheck "Show compatible hardware".
    -Scroll down on the "Manufacturer" for "Broadcom" Panel and select
    -Scroll down on the "network card:' and find"
    "Broadcom 802.11 Multiband Network adapt."
    -Select, and then click "next".

    THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

    -Say yes to the "put to update driver Warning"
    -Close and you should be able to connect with elegance.

  • Carriage of aftermarket for Acer Aspire E1-572-6676

    Hello I would like to install a 2nd hard drive where it should be a cdrom in my Acer aspire E1-572-6676

    There is a plastic tray, but it is not designed to receive a HDD (designers should think about scalability).

    But I see two small connectors at the other end of the slot, would they be msata ports?

    What can I use as a caddy hard drive to put a 2nd SATA not msata HDD?

    You need something like this:http://www.ebay.co.uk/itm/like/390822753540?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=1...

  • Please tell how to enable access to the Advanced BIOS - Acer Aspire E1-572

    Hello

    I recently bought an Acer Aspire E1-572 and come to find out that the BIOS has little information available.

    I need access to advanced options for virtualization support and would like to know how I can do this.

    Acer provide an update of the BIOS for this?

    Thanks a lot for your help.

    Ian

    Hello...

  • help please, acer aspire R7 - 572 to very short range of wifi.

    I have my 2 month old acer aspire R7 - 572, my wifi speed is ok, but you must close to the router. Wifi problem is very short range, any suggustion to help me.

    You can search for "Aspire R7-572 Wifi card Issues" of this forum and see if this helps. There are some good suggestions.

  • How to add an optical drive and the bezel for Acer Aspire V3-572-5217

    I think to buy the V3 Aspire 572 5217 and I would like to know the process of adding an optical drive. I did some looking and well enough to assume that the majority is universal. I would like to know if the product comes with a scope or if I have to buy a. If Yes, what measures do do so that the right settings?

    Thanks for any advice.

    Hello Brian,.

    For uphill on Aspire V3-572-5217, need you the following:

    42.ML9N2.001 - ODD BEZEL

    33.ML9N2.003 - ODD SUPPORT

    Ko.0080D.014 - DVD RW 8 X SUPER-MULTI 9,0 MM TRAY GUA0N HLDS LF + HF without BEZEL M-SATA DRIVE

    (Hitachi LG data storage)

    KO.00807.016 - DVD RW 8 X SATA M-DISC 9,0 MM TRAY SUPER MULTI DRIVE UJ8E2QBAA2-B PANASONIC

    LF + HF without the PANEL (UJ-8E2)

    You can ask for quote and order these parts in your Acer store.

  • HP 15-do51ea: Power DVD stopped working

    I used to watch the DVD movie on my laptop. I had problems with the help of Internet Explore. I reinstalled windows 10. DVD movie has stopped working since then. What should I do?

    Thanks it works.

  • DVD stopped working got external dvd but no not disks work runs for a few seconds then stops

    has had to put the new hard drive in the computer. When I got back that DVD has worked for a while then stopped. Downloaded the software and drivers to try to fix the problem, but no luck. I tried an external but computer dvd for some reason any will not recognize the unit. I also have a legacy of clickfree backup, but now that my dvd works not the clickfree will not work. I have also reinstalled the dvd but that did not work. any ideas?

    Hello

    ·         What operating system do you use?

    Follow these methods and check if that helps.

    Method 1:

    Run this Microsoft fixit t tool and check if it helps.

     

    Your CD or DVD drive cannot read or write media

    http://support.Microsoft.com/mats/cd_dvd_drive_problems

    Method 2:

    I suggest you follow the troubleshooting steps form the article and check if it helps.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/314060

  • Acer w3-810: heating problem & touch stops working after a while.

    1 year warranty, 810, Acer w3 expired, the Tablet is showing heating questions now, close the camera back and after a while to the touch stops working, touch works fine on reboot and compressed is cold. When the Tablet is connected to a network to the touch stopped working earlier than when not connected.

    to solve this problem:-J' I reset the windows. which increased the length of time in which the touch works but always to the touch stops working after a while.

    I disassembled the Tablet and found that the part that is overheating is memory [h9tknnnbpdma].

    What shoul I do, what I need to change the digitizer, software or any better solution?

    resolved:

    the problem was solved when I disconnected the cables of the digitizer and then reconnected.

  • Why not my Acer Aspire 5336, burn cd / dvd? I tried the update and uninstall drivers! I have

    Why my acer 5336 cannot burn CDs / DVDs on secondary storage (DVD/CD), its leaves is failing or simply the empty disc after burning process took place. It's very frustrating! Help, please. I want my acer to burn CD / DVD. Properties of my acer 5336: CD-ROM/DVD-ROM (standard CD-ROM drivers).

    It may be a problem with the software that you use or the laser on the optical drive can no longer work. I recommend performing a factory restore and then try to burn files to a blank DVD-R/CD-RW. I would try to copy certain files and images just as a test.

  • Aspire keyboard E5 - 571G letters stop working?

    8.1 Windows x 64
    BIOS has been updated recently, as well as the touchpad.

    Sometimes my keyboard doesn't work, more specifically a set of keys: B N Y U H 7 and 8.
    It is always those who stop working. I bought the laptop Dec 2014.

    This happens when I start the computer or even in the middle of me playing a game or surfing the Internet. I noticed this only when I'm tryign to type something.

    I pressed NUMlock to judge if he deal with it - don't. I've done close to the bottom of the laptop, remove the power cable + battery and keep the power button down for 10 seconds - no problem.

    I want to update the keyboard driver - he could be the culprit and yet I can't find anything on the keyboard Acer drivers and manuals section. The touchpad has been updated.

    The only way to make it work, is if I go to the control panel > troubleshooting > hardware.
    Then a strange message appears at the end of scanning: some changes may not have been detected.   DETECTED (but a tick next to her).

    Can anyone help please? It is a mobile phone fairly recent. It is still under warranty! However, I bought the Portugal and I live in another country where I don't trust how my phone is carried out by people here. Believe me, you wouldn't either.

    Can someone help me find the driver for the keyboard, so I can update or maybe another solution?

    How can you tell that I need to replace the entire keyboard only after 14 months? It's crazy. Do you mean that computers Acer laptops break it easily?

    For everyone who has had this problem to do what I did. What I read on someone else who had the same problem - and a lot of people have it and has nothing to do with the material, but with the software.

    Do not despair, here is the solution that has worked for me so far and didn't make me replace my keyboard like this man here says - what a waste of money.

    (1) type in your search for windows: regedit.
    2) go to computer > HKEY_LOCAL_MACHINE > SYSTEM > setting > Services

    (3) scroll i8042prt (it's the name of my PS/2 keyboard in the system).

    4) go to Enum > make sure your files NextInstance and Count are on hexadecimal number "1".

    That's all.

    Since I posted this, I've not had problems with the keyboard at all.

    I hope that this will be your solution as well!

    I recommend installing Acer Philips (drawn from the acer site) so you are able to see what available drivers, you can install and keep your laptop up-to-date. And no, Acer did not a driver update for the keyboard.

    [edited to conform to the guidelines]

  • Acer Aspire 2920 Crystal Eye webcam not working not not after installing updates

    After automatic update of my computer service pact 2 now my webcam shows that it is not connected when try to connect the cam... want to advise... TKS.

    Original title: Crystal Eye of Acer Aspire 2920

    Hi Kegankh,

    I suggest you to uninstall and reinstall the drivers for your Acer Aspire 2920 Crystal Eye and check if it helps to get the webcam working.

    To uninstall the drivers of Webcam and software programs and features, follow the steps below:

    1. Click Start.
    2. In the start search box, type programs and features.
    3. In the list, click on programs and features.
    4. Check the webcam software and uninstall it.
    5. Restart the computer.

    During the uninstallation, the device in the Device Manager, make sure that you follow the steps below:

    a. Click Start.

    b. access control panel > system > hardware > Device Manager.

    c. open Device Manager and expand the imaging device.

    d. right-click on the webcam device installed and uninstall the device.

    During the uninstallation of the device, make sure that you place a tick against 'delete the driver for this device '.

    Restart the computer and install the latest version of the drivers of webcam and check if it works very well.

    Here is the link for Acer Aspire 2920 Crystal Eye drivers:

    Drivers for Acer Aspire 2920 Crystal Eye

    I hope this helps. Let us know the results.

    Thank you and best regards,

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • CD/DVD stopped working

    CD/DVD equipment stopped working. I tried once to make it back by associating with RealPlayer and he played only once, but he then returned to do not work, either video or audio.

    Please see the above headline. It has all the details I have to offer (for now).

    Hello davidtrans,

    ·         Do you remember making the last changes made to the computer (software or hardware) before the CD/DVD drive no longer works?

    ·         How do you associate the CD/DVD player for Real Player?

    I suggest that you run by following the below Fix - it. This will automatically diagnose and repair problems with your CD or DVD drive when trying to read or burn media:
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • How can I keep the screen from closing when I close the macbook pro when you use the apple wireless keyboard?

    Try to use with my macbook pro apple wireless keyboard and an external display.  The display turns off when the macbook pro is closed.

  • Data on the network

    Hi.I have a few problems with my k3 npte. It always shows the roaming and the information network need to authorize the data roaming. I'm on the network of Lebara and use internet Sonofon. Is there anyone who can help me?

  • E6410 display - apparently bad native resolution

    I have a Dell E6410 used mainly with Ubuntu 12.04, dual boot in Windows 7. In the last days (and without changing anything knowingly) the screen of the computer ceased to display correctly.  The picture is always visible, but pale, with thin white ho

  • ISE is associated with the AD, but some groups are missing

    People, In my ISE I already joined my announcement on a Windows 2008 Server. But when I retrieve groups with *, some groups are missing. I mean there is a band like XXX.COM\COMPANY\IDG\HR in my 2008 Server, but I can't get back in my ISE, the group i

  • From 6.0 to 6.3 Lightroom update?

    I downloaded Lightroom 6.0 on my computer running Windows 10 and returned to the site to update to 6.3, as in https://helpx.Adobe.com/Lightroom/KB/Lightroom-downloads.html .  Download the file, but there is no pop up for work, so he ends never really