assign a dynamic action to a text element

Similar Questions

• Can not set a value by the executed dynamic action on the page element "selection list."

  I created an agenda of the page 'list of selection' and I want to when I change a value in another element of the page set only 'screen '.

  I created a dynamic action on the page element "selection list" for this.

  These are the dynamic action attribute:

  When:

  ======

  Event: change

  Selection type: point

  Article: P29_PURCHASE_ORDER

  Condition: No strings attached

  Advanced:

  ========

  Scope of the event: static

  Identification:

  ==========

  Action: Set

  The ' Action Page when the changed value "attribute of the element of 'list of selection' = 'None', and when I run form the dynamic action run and set the value for once and do not update the value according to the change in the article"list of selection. "

  Note: when I change the previous attribute of 'Redirect and set', dynamic action run and properly value, but the value was hidden soon

  I want to value when the value of change of select list according to this change successfully.

  Please, advice me,

  Best regards

  Mustafa Ezzat

  Hello

  you set the value of the 'Page elements to submit' to P29_PURCHASE_ORDER?

  Then, the SQL statement would use the current selected value.

  This is the help text says: "specify a list separated by commas of the elements of the page that will be submitted to the server and therefore available for use in your"SQL statement"," PL/SQL Expression"or"Body of the PL/SQL function".»

  Kind regards

  Erik-jan

• Tips: APEX 5 r IR by a dynamic action after the text fields complete

  Hello I hope I can get assistance on this matter and thank you in advance for any information.

  I have an APEX 5 screen, that has 4 fields of entry of text and under this one IR that has these 4 parameters in its SQL where clauses.

  Now if I create a button that submits page or redirects to this page my report can be updated with the values of user entered without problem, basic stuff.  If I create the settings section as a dialog box model once again that I can get the update report as this dialogue submits the page as well as the report can refresh according to closed dialog option.

  What I struggle to reach is to allow the user to enter values in the text fields click on a button called 'submit' and there all stages of implementing dynamic action without page reloading.  I want user to P1_A, P1_B, P1_C, P1_D press on "submit" input, dynamic action that links the values entered into the fields, then fire another dynamic action that updates the State when the button is clicked / modified values what works the best.

  I am struggling to get this to work and I even tried to copy these settings and do them as hidden for example bind input P1_A to P1_A_Hidden by a dynamic action and have the report where clause =: P1_A_HIDDEN, but have not managed to get this working.

  It's possible?  I know its easy to simply send the page and make it work, but I want the experience to be quite uniform for the user and act as you never leave the page.

  I saw on the packages of the app in the chart example.  The bubble chart has a list selector (salary) and the table updates dynamically, it seems so that the process can occur, but I need the user to enter text and not use selection lists.

  My apologies if I missed any, but I can give you more if it helps.

  Concerning

  1972903b-5166-494e-8355-08d9d4006e96 wrote:

  Hello I hope I can get assistance on this matter and thank you in advance for any information.

  I have an APEX 5 screen, that has 4 fields of entry of text and under this one IR that has these 4 parameters in its SQL where clauses.

  What I struggle to reach is to allow the user to enter values in the text fields click on a button called 'submit' and there all stages of implementing dynamic action without page reloading.  I want user to P1_A, P1_B, P1_C, P1_D press on "submit" input, dynamic action that links the values entered into the fields, then fire another dynamic action that updates the State when the button is clicked / modified values what works the best.

  The button simply trigger a unique dynamic action of refreshment on the IR region. Session state for page elements must be processed automatically by specifying them in the property Page to submit Items of the IR region.

  Please ensure that you have updated your forum profile with a recognizable username instead of "1972903b-5166-494e-8355-08d9d4006e96": Video tutorial how to change username available

• Update of dynamic Action with the text box

  This goes along with: update records with the text box

  APEX: 4.0.2

  THEME: SAND

  SERVER: Oracle-Application-Server-10g/10.1.3.1.0 Oracle-HTTP-Server

  I created an example with more comments on the page:

  workspace: stevendooley34

  username: dev01

  password: dev01

  application: examples of Forum

  page: update example

  I've implemented just as I think it should be put in place, but records only updates by clicking on my Refresh"" button.

  Keep in mind that the example is found in the apex 4.2.5 but I will implement this in 4.0.2.

  Thank you

  Steven

  
  
  

  Hi Steven,

  I think the main thing that was missing was adding the elements used in the PL/SQL "Page to go".

  The reason this is necessary is so APEX know what values of point on the browser should be sent (as part of the AJAX call) to the browser.

  IF you had all the elements that must be returned to the screen, then you will use the 'Page field items to return.

  I've also corrected a few things, P6 instead of P6 and P6_SEARCH_TYPE instead of SEARCH_TYPE, but they were just small "bugs" in the example.

  I also added another real action to refresh the report after the update.

  Thank you

  -Jorge

  PS. I do not validate that your code works for multiple, but the first glance entries and a quick test, it seems to work fine.  I focused only on the DA.

• Dynamically create the input text element

  Hello
  
  I'm trying to dynamically create a text entry and add it to the Table
  
  but I'm having some problem with createWebBean method we can invoke it.
  
  Please help thanks
  

  import oracle.apps.fnd.framework.webui.OAPageContext;
  import oracle.apps.fnd.framework.webui.OAWebBeanConstants;
  import oracle.apps.fnd.framework.webui.beans.OAWebBean;
  import oracle.apps.fnd.framework.webui.beans.message.OAMessageLovInputBean;
  import oracle.apps.fnd.framework.webui.beans.message.OAMessageTextInputBean;
  import oracle.apps.fnd.framework.webui.beans.table.OATableBean;
  import oracle.apps.pa.ci.webui.PaSupplierImplementCO;
  import oracle.apps.pa.util.webui.Debug;
  
   public class xxpaPaSupplierImplementCO extends PaSupplierImplementCO {
  
      public void processRequest(OAPageContext paramOAPageContext,OAWebBean paramOAWebBean) {
          
          super.processRequest(paramOAPageContext, paramOAWebBean);
          xxpaProcessRequest(paramOAPageContext, paramOAWebBean);
      }
      public void xxpaProcessRequest(OAPageContext paramOAPageContext,OAWebBean paramOAWebBean) {
          
          super.processRequest(paramOAPageContext, paramOAWebBean);
          print_log("Start processRequest",paramOAPageContext);
          
          OATableBean localOATableBean = (OATableBean)paramOAWebBean.findIndexedChildRecursive("SupplierTable");
          if (localOATableBean != null){
             OAMessageTextInputBean xxPaPOQuantityBy = (OAMessageTextInputBean)createWebBean(paramOAWebBean,OAWebBeanConstants.MESSAGE_TEXT_INPUT_BEAN,null,"xxPaPOQuantityBy");
             OAMessageTextInputBean xxPaPOQuantityBy1 = (OAMessageTextInputBean)createWebBean(paramOAWebBean,MESSAGE_TEXT_INPUT_BEAN,null,"xxPaPOQuantityBy");
             xxPaPOQuantityBy.setPrompt("Change Quantity By");
             xxPaPOQuantityBy.setMaximumLength(10);
             localOATableBean.addIndexedChild(xxPaPOQuantityBy);
             print_log("PO QTY ADDED ot Supplier Table",paramOAPageContext);
          }
           
          print_log("End processRequest",paramOAPageContext);
      }
  
  }

  Hello

  Try with:

  OAMessageStyledTextBean oamessagestyledtextbean is createWebBean (OAMessageStyledTextBean) (oapagecontext, "MESSAGE_TEXT", null);.

  Concerning
  Meher Irk

• Setting of an element by using a dynamic action of PL/SQL does not?

  Hello
  
  I have what is probably the problem of the beginner...
  
  1 - an element with the default 'http://google.com '.
  2. on a button, I have a dynamic action that defines an element
  3. first action of PL/SQL (: p1_cmd: = "http://www.oracle.com"; with elements of the Page return = P1_CMD)
  4. second action alert displays this text 'P1_CMD = & P1_CMD'.
  
  I expected P1_CMD to be "http://oracle.com" in step 4 but is still "http://google.com" even if he showed... oracle...
  
  How much I miss or do not understand?
  
  Thanks for helping a newbie
  
  PS while my example seems simple, the goal is to construct a URL (using items entered by the user and a DB function call), and then open it in a pop-up window. Everything works except that the constructed URL is still a virgin when you call the popup

  Hi yv *,.

  using the syntax & MY_ITEM., the value is populated only on page rendering. In your case, value is populated probably okay, but you get it in the wrong sense.
  Try to use JS API (http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/javascript_api.htm#CDEEIGFH), for example $v ('P1_CMD').

  BR,
  Marko Goricki

• Use Dynamic Actions with pl/sql, calling a javascript alert function

  Hello
  
  I use Apex 4.0.1.00.03 with IE7.
  
  The problem I have is:
  
  I am converting an Oracle Forms application that has a lot of logic in it. In the application forms, it is a pl/sql function, based on a If/else condition call a popup alert box, which displays a warning message. He called pl/sql functions that return raising to the IF statement.
  
  Example of pl/sql code:
  
  If check_records() > 0 Then
  message to the alert box
  ElsIf TypeA_record then
  message to the alert box
  On the other
  message to the alert box
  End If;
  
  I need to replicate this functionality to the Apex 4. I tried to create dynamic Action on a page element, using a pl/sql function, however, when I call the popup javascript, this code not popup an alert box. I need the pl/sql to be run when the element of the page changes, not when the page is sent.
  
  The code I used to test the pl/sql code, which does not work in dynamic Actions > pl/sql is:
  
  Begin
  HTP.p ("< script type =" text/javascript"> '");
  HTP.p ("alert ("today runs javascript code!");"
  );
  HTP.p ("< /script >");
  End;
  
  I need to create a pl/sql function that can do alert areas based on an IF condition.
  
  Could someone point me in the right direction? Using dynamic shares the best way forward? I need to trigger on a page element, change the value.

  Works fine now.
  In the javascript code, I changed:

  get.addParam ('x 01', $v ('P105_PREP_TYPE'));

  by

  get.addParam ('x 01', $v ('P1_PREP_TYPE'));

  P1_PREP_TYPE is the correct name of the element.
  Now when I choose the OTHER, 1 message.

  Concerning

• How to get the control to one of the text element?

  Dear people,
  I have two items of text to say TEXT_ITEM5 and TEXT_ITEM6.both values entered in the text elements must be equal.else that an error message should be displayed and two items of text should be cleared.so that I wrote the following code in WHEN BUTTON the shutter as.
  

  If :block3.text_item5 <> :block3.text_item6 then
            c:=show_alert('ALERT21');
             :block3.text_item6:=null;
            :block3.text_item5:=null;
                     raise form_trigger_failure;
  end if;

  Its almost works well, but after having erased the text in the two elements of the control text should go back to TEXT_ITEM5. I even tried GO_ITEM but is not working properly.pls help me with suggestions.
  
  
  Regarding
  Vids

  Hello

  If the value of two text element should be equal so why give the possibility to enter 2 text boxes? Enter 1 text and WHEN-VALIDATE-ITEM trigger of this element, assign the value to the other text element. And if you still need the old way, then you must write the GO_ITEM integrated before the RAISE FORM_TRIGGER_FAILURE statement.

   IF :BLOCK3.TEXT_ITEM5 != :BLOCK3.TEXT_ITEM6 THEN
     C := SHOW_ALERT('ALERT21');
     :BLOCK3.TEXT_ITEM6 := NULL;
     :BLOCK3.TEXT_ITEM5 := NULL;
     GO_ITEM('BLOCK3.TEXT_ITEM5');
     RAISE FORM_TRIGGER_FAILURE;
  end if;
  

  Kind regards

  Manu.

• Trying to assign a Joint Action at various elements of text in an individual shape smart

  Hello

  I'm looking for the best way of allocation for joint action to different elements of text in an individual shape smart and I was wondering if anyone can offer advice?

  As this situation seems pretty complex (for me at least), I'll try to explain below exactly what I'm trying to achieve.

  
  

  The scenario

  I built a Web-type site navigation menu that allows to include a lot of information in a slide (see image below). It comes to 2 groups of intelligent form. Group of buttons and text caption containing each group 6 intelligent forms. Works of interaction by assigning a shared standard action to each button which first hides the whole text caption, then displays just the pertinent legend, for example by clicking on the button 1 shows text Caption 1.

  

  What I'm trying to reach

  I'm trying the component snap a feature allowing the user to click on the word "Click here to see the example" that displays a separate layer that appears as a pop-up lightbox.

  
  

  The problem

  I see 2 ways to achieve this;

  1. Convert the text of the legend of a button and assign a shared action that displays the "ligthbox.
  2. Use the Insert Hyperlink dialog to assign an action advanced the text 'Click here to see example 1'.

  
  

  However, with option 1 I would be limited to the particularly that a pop-up window in the example with the legend that the entire box would be an important link.

  
  

  In option 2 as there is no option to trigger an action of the Insert Hyperlink dialog box box (see picture below), I would end up having to create a further action for each example, I wanted to include advanced. This seems overkill for what I'm trying to achieve.

  

  You can see a better way to do this? I'm sorry for the lenghty post, I feel that I could be too much thinking that it.

  Thank you

  
  Ross

  For reference, I use 8 Captivate.

  I was thinking about using a click box, but give the variable a number based on the button (your buttons on top of the screenshot) clicked. Which could then be used to make it appear the right lightbox when you click on the single click box. This approach is not usable, because you want to view several examples of a lightbox.

  However, given that you need several interactive objects within the container of a text it will be excluded. This is the reason why I suggested the unique click box.

  ATTENTION: never have two interactive objects that overlap at this moment, which will cause problems without a doubt.

  Looks like you'll have to create a group of individual for each of the viewers: text + many clique boxes needed to bring up an example. Don't forget to think about the labelling of these areas to click and albums to be able to identify when the application of the joint action which shows the example.

• Dynamic action - compare the elements in Date - Show Alert

  This is my first attempt to create a dynamic Action. I am creating a dynamic Action that displays an alert if a user enters a date in an article in date picker (P1_DATE1), which is less then another date in a different element (P1_DATE2).
  
  Event = change
  Select Type = item (s)
  product (s) = P1_DATE1
  Condition = less than
  Value = <? >
  
  If the condition is true, it must trigger an action type 'alert '. The alert text should read something like "Date1 precedes Date2.
  
  I'm not sure what syntax to use in the value element. It seems not that I element values in the element of reference value.
  
  
  How can I create a dynamic Action that will assess if P1_DATE1 < P1_DATE2 when P1_DATE1 is changed and show a warning if this is true?
  
  Kind regards
  Todd

  Change the status of "javascript expression", and then assign the expression $v ('P1_DATE1')<$v('P1_DATE2'). then="" add="" a="" true="" action="" in="" which="" you="" do="" the="">

• In table form, a dynamic action to disable and set of columns of text

  Hello!!

  With the help of APEX 4.2.6 with Oracle 11 g R2, someone I work with has a tabular presentation of the need to do the following:

  Tables has the following provision:

  

  When the user selects the UOM LOV Dollars, the rate must have related associated text box the amount set to 1.  We currently have JavaScript disable and set the background color, but fo rth elife of me that I can seem to help set the value...

  The code we have in dynamic action:

  < tt >

  ROW_ID = $(this.triggeringElement).attr('id').substr (4);

  If (. val() $(this.triggeringElement) == 2)

  {

  $(«#f04_» + row_id) prop ('readOnly', 'readonly');

  $(«#f04_» + row_id) prop ("class", "textinputdisabled");

  .Val (1) $("#f04_" + row_id);  < = Here's where we had the question...

  }

  on the other

  {

  $(«#f04_» + row_id) prop ("readOnly", false);

  $(«#f04_» + row_id) prop ("class", false);

  < /tt >

  Thank you

  Tony Miller
  Los Alamos, NM

  Hi Tony

  What exactly is the problem here? I have no problem setting the value using the method described above. There is even a '1' in the screenshot above, no doubt, which indicates that the value has been successfully changed.

  For ease of improved management, I'd use traversal Dynamics for the form element affected, rather than hard-code the ID (or go with a DA conditional with distinct actions of true/false), but the jQuery code to set the value is the same:

  var uom, rate;
  
  uom = $(this.triggeringElement);
  rate = uom.closest('tr').find('td[headers="RATE"] input');
  
  if (uom.val() === "USD") {
    rate
      .prop("readOnly", true)
      .addClass("textinputdisabled")
      .val("1");
  }
  else {
    rate
      .prop("readOnly", false)
      .removeClass("textinputdisabled");
  }
  

  (I used a static LOV in the column of the unit of MEASURE, so the value of '$' is 'USD' rather than '2').

• value of the element is not common when used in dynamic action

  I'm learning the 5 apex and I wanted to create a page that would update the fields in a record by entering the unique id of the recording using a dynamic action with plsql.

  When I click on the button update the value of the element of the text uses the previous value and not the input current. The 'works' update, but the ID values are not appropriate.

  How can I make sure that when I click on the update button, the dynamic action will get the current value of the text element and not the previous (when the page was submitted)?

  I created a quick demo or what I was testing in apex.oracle.com and always gives me the same result.

  dacoellov wrote:

  I'm learning the 5 apex and I wanted to create a page that would update the fields in a record by entering the unique id of the recording using a dynamic action with plsql.

  When I click on the button update the value of the element of the text uses the previous value and not the input current. The 'works' update, but the ID values are not appropriate.

  How can I make sure that when I click on the update button, the dynamic action will get the current value of the text element and not the previous (when the page was submitted)?

  I created a quick demo or what I was testing in apex.oracle.com and always gives me the same result.

  What dynamic action event and what types of action are involved here? Provide details, or better yet share identification information of developer comments for the apex.oracle.com workspace so that we can see the demo.

  If the dynamic action executes an SQL statement or a PL/SQL process on the server that requires page updated element values in session state, specify these items as part of dynamic action Page to submit items .

• Dynamic action in Apex - automatic text field display based on the definition of value

  Hello

  I have two text elements. Need to create dynamic action for what follows,

  1 Order_number

  2 Order_type

  When a user enters an order number starting at 1, the order type should type should automatically posted as CONSUMER.

  
  

  When a user enters an order number starting with 2, the order type should type should be automatically displayed as COMPANY to another display null.

  Can anyone help please have solved this issue.

  Thanks in advance!

  Hi 2932464,

  2932464 wrote:

  Please change your login username of "2932464" to something meaningful. Reference: Video tutorial how to change username available

  I have two text elements. Need to create dynamic action for what follows,

  1 Order_number

  2 Order_type

  When a user enters an order number starting at 1, the order type should type should automatically posted as CONSUMER.

  When a user enters an order number starting with 2, the order type should type should be automatically displayed as COMPANY to another display null.

  Can anyone help please have solved this issue.

  Hereby you mean something like this: https://apex.oracle.com/pls/apex/f?p=52380:11:129938442406997:

  If Yes, then create dynamic action as follows:

  • Create a dynamic action on the Order_number change event say. P11_ORDER_NUMBER.
  • Event-> change, Type of selection-> item (s), article (s)--> P11_ORDER_NUMBER Condition-> is not null
  • Real Action-> to run the JavaScript Code
  • JavaScript code:

    var ordernum = $('#P11_ORDER_NUMBER').val();
    var startdigit = ordernum.substr(0,1);
    if (parseInt(startdigit) === 1) {
      $('#P11_ORDER_TYPE').val('CONSUMER');
    } else if (parseInt(startdigit) === 2) {
      $('#P11_ORDER_TYPE').val('BUSINESS');
    }
  

  I hope this helps!

  Kind regards

  Kiran

• dynamic action sets the value of the element, but not save to DB on submit

  I'm working on a page where the value of several to show only the page elements are defined using a dynamic Action.  They are set when the user selects a value in a list of selection (and is based on the value of the selection list).  Dynamic action is triggered on a list selection change event and then runs the real action "set the value.  The selection list displays the names of sales representative.  The three fields dynamically filled are the org structure (that is, their chain management).

  For the action to set the value, I use a defined Type of SQL statement:

  Select VP, DIR, MGR

  of SALES_ORG where SSR =: P20_SSR

  In the affected elements, I have fixed Type of selection to the 'item (s)"and the value of the Item (s) for 'P20_GVP, P20_DIR, P20_MGR.

  Dynamic action works fine for the display of the page (that is, when I select a sales representative in the selection list dynamic action properly updated only display value fields three).  This page is a form in which the user submits information relating to the rep.  When the page is sent, all fields are filled in a new record of DB with the exception of three that were populated dynamically above.  These fields get the values NULL.

  When the dynamic action updates the values in the three fields is - it does not set the value of session?  Why these fields don't are not taken into account in the submit other ideas > process Page?

  I use 5 APEX with Chrome on Mac (Yosemite).

  Thanks for the note.  I didn't only display the items could not be used in this way.  I think I'll take a different approach with the design; given that the org structure is in another table that I can simply refer to that by rep when necessary rather than saving the information uploaded to the page of the form.  The reason why I have not fill the screen only the points of loading the page is because I don't know what the values should be until the user selects a sales representative in the selection list.

  I'll change the design to one of the following:

  1) change the display only items of standard text field.  NOTE: if I make the text read-only field that causes other problems when loading (I get the message "violation of protection Session state").

  OR

  2) do not include org structure in the download folder and just refer to table org Rep when necessary.

  Thank you!

  Steve

• Dynamic Actions disable button based on the text field

  Hello

  Sorry if this has already been asked but I checked and could not find a job.

  «I'm trying to disable / enable a button "view" among the elements of this region from if a text field has a value or.»  I created a dynamic action for this but its not working only partially.  I can get the button to be disabled or enabled when I leave the text field, but what I'm trying to do is to get the State of button to change as soon as I start to type in the text field or return to people with disabilities if the text is deleted.

  I don't know that I'm missing something simple and help you can give is greatly appreciated.

  I use APEX 4.1 and that's how I got the dynamic action implementation, I tried different but no event types to give them action I want.

  I also install an example (details below)

  Event - change

  Selection type - point

  Article (s) - P1_TEXT

  Condition - is null

  Real Action

  Action - disable

  Fires when the result of the event is - real

  Fire on the loading of the Page - Y

  Items affected - button

  Article (s) - P1_BUTTON

  Action of false

  Action - Enable

  Fires when the result of the event is - fake

  Fire on the loading of the Page - Y

  Items affected - button

  Article (s) - P1_BUTTON

  workspace - show_issue

  user_name - show_issue

  password - show_issue

  app_id - 61707

  http://Apex.Oracle.com/pls/Apex/f?p=61707:1

  It works as expected if you change the event of 'Change' for 'key version?