Check operation fate

Similar Questions

• Help! If/else check operation

  Hello

  I have a little trouble with some pretty basic code. I hope someone can help!

  It's the source of my misfortunes:

  var check1:Number = 0;

  images.onEnterFrame = function() {}
  If (images._x = 630) {}
  Check1 = 0;
  } ElseIf (images._x < 630) {}
  Check1 = 1;
  } else if (images._x > 630) {}
  Check1 = - 1;
  }
  }

  With just this active code (I've set up a test file), the 'images' clip gets repositioned to x = 630 during execution. Why it does this? I tried this function only to change the value of the variable "check1", not actually do any translation on "images".

  Any help would be greatly appreciated!

  (Oh, and it comes to AS2.)

  Because you assign to be so...

  If (images._x = 630) {}

  = is for transfer, == for comparison

• Why gmail Checker highlights partial words?

  Recently, I received the latest version of Firefox for my Windows XP desktop computer. Since that time, when I type emails puts check fate a red wavy line under parts of a Word. When I click to check the spelling of the e-mail, parts of correctly spelled words are highlighted in yellow and the dictionary trying to provide spellings for these pieces of each word highlighted. I went into options of Firefox and unchecked the box for spell check as I type. That did not help. What can I do to fix this?

  Hello

  You can update Firefox by help (Alt + H) > On Firefox, or from https://www.mozilla.org/en-US/firefox/new/

  Update

  If you are using an add-on, you can try to disable it in Tools (Alt + T) > Addons > Extensions. Please note that Gmail has a spell check operation, so if the problem persists, you may need to disable the spell checking of Gmail. Gmail support would also be useful.

  Using extensions

• Check disk

  Hello

  Is someone out there can tell me why whenever I turn on my computer, it runs a check of the drive to Cdrive?

  Usually, it is because Windows treats this disc "dirty."  This happens usually when your machine is not shut down properly.  Usually a successful disc check operation resets this bit and it doesn't happen on successive boots.   However, it is possible to set your computer to always check the disc.  To change this behavior, open a command prompt window (start-> Run-> "cmd") and use the command "CHKNTFS.  An explanation of how to use the program can be found here:

  "CHKNTFS. "EXE: what you can use it for.
    <>http://support.Microsoft.com/kb/160963 >

  HTH,
  JW

• The disk check is always performed at startup

  The same disk check operation is wasting a lot of my time when I start my eMachines desktop computer. Is it possible to tell which device is causing the delay?

  Hi dcprice

  Thank you for visiting the website of Microsoft Windows Vista Community. In order to focus more on your particular situation, I'll split your post into a new thread.  Son of splitting are made to mitigate the confusion caused by more than one display on similar topics, which allows us to focus on each client individually.

  You can try this Registry Fix possible

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk

  Click Start
  In the start search box, type regedit , and then press the ENTER key
  Navigate to the following key
  HKEY_LOCAL_MACHINE
  SYSTEM
  CurrentControlSet
  Control
  Session manager

  ' HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager ".

  Change the BootExecute value (by double clicking) "autocheck autochk *" to "autocheck autochk/k: c" (without the "")

  If please post back and let us know if it helped to solve the problem - thank you
  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Opera: "could not load plugin".

  Opera to load the Adobe Flash Player very well at home, but I get "Could not load plugin" on my desk without wire.

  I checked "Opera://plugins" and get the appropriate version at home, but at the office, I get worm 99.999.999.999.

  Both show the correct version in the location of the file.

  Anyone know what is happening?

  After fishing trawl the internet looking for a solution and instead I returned to basics and uninstalled Adobe Shockwave player and Adobe Flash 23 12.2. I have Goggled then download pages and installed recently downloaded copies of both. He worked either could not find plugin reviews.

• Enter the profile "old_password" function check...

  Environment: Oracle EE on Solaris 10 < something > 11.2.0.3
  
  I am currently using a slightly modified version of the provided password check operation seen in $ORACLE_HOME/rdbms/admin/utlpwdmg.sql to verify new passwords. I need to add logic that checks the new password change in addition to 'x' characters, in my case 4 four.
  
  Of course, I can do if I use a script that calls for the old password and the new password.
  
  However, I would like to have the password to verify the function specified in the profile of the user, so it will be invoked if anyone executes a 'ALTER USER... "to tell SQL * more.
  
  Even if there is an entry for the old password setting, when the function is specified in the profile, the past old_password parameter is always passed as a NULL value.
  
  Is it possible to get the old password sent to the audit function to compare with the new?
  
  I guess it must be clear to the verification of the character.
  
  All available to show a typical auditor than the new passwords have been changed by at least four 4 characters when the password is changed by using all means available workarounds like SQL * Plus, SQL * Developer, TOAD, etc..
  
  Thank you much for the help!
  
  GO GIANTS in Superbowl XLVI in Indy!
  
  -gary

  Hello

  When a DBA changes the password of another user (using the alter user privilege), the old password
  is spent with the NULL value to the function of audit, only the owner user (aka even) will be required to use the
  REPLACE clause to specify the old password in this case, you can make the necessary checks, all the logic
  Is that if a DBA defines the password it 1. does not know the old password 2. has sufficient mind either
  Specify a password, or 3. immediately expired the password for the user is forced to change.

  Greetings,

  Damage

• HP11C calculator

  My HP 11 c did not turn over (she had only two hours before, I recalled having seen the asterisk of low battery), so I changed the batteries. As I put in the new batteries it continues to Flash the latest figures who were on the screen, before he had turned of. ICAN press any key combination: no change, remove and put in the new battery: flashing again. What can I do?

  Hello

  These calculators sometimes stuck in erratic behavior.

  You can try:

  (1) reset: with power off, press and hold IT. Press and hold escape key. Following the release. Release to remove the key. It should say "Pr mistake."

  (2) remove the batteries for at least 12 hours.

  (3) remove the batteries and short the battery contacts calculator for a few seconds with a paper clip or a similar driver.

  Please ensure that you have a good brand of batteries of type LR44 or SR44.

  (Note: NEVER put the rear batteries or put something else than the stacks suggested in the calculator).

  To check operation:

  Self-test: With power off, press and hold IT. Press and hold the key multiply. Following the release. Release multiply key. It should show 'on' for about 25 years and then view - 8,8,8,8,8,8,8,8,8,8 and all the indicators. If it says "Error 9" there is a problem.

  Self-test with test keyboard: with power off, press and hold IT. Press and hold the key of fracture. Following the release. Key release of fracture. Then from the top row, press all the keys from left to right, pressing enter once in the 3rd and 4th line. The display will change with each press of button. In the end, it should display "11". If it says "Error 9" there is a problem or the keys were pressed in the wrong order.

  I hope this helps.

• Re: Satellite A500 and Web camera installation

  How to get started installing web camera on the laptop?

  Hello

  Go to the utilities of start-all the programs-Toshiba - Toshiba - Web camera application.
  If you want to know more information, how to use, check, operating manuals.

  Welcome them

• TouchSmart HP Envy 15-150: HP Support Assistant does not

  After the upgrade to windows 10 8.1, I back return because of windows 10 graphics issues. I noticed that HP Support Assistant has stopped working with the error "Missing leader HP Support Solutions Framework 11.51.0049.msi". I did a windows update and installed the required updates. Tried to uninstall the framework but can't because of the same error. Upgrade to windows 10 with the same results.

  I have read and tried several suggestion forum, but alas to no avail. Any suggestions?

  OK, I got it fixed and thought I'd share my solution. I followed another thread and used Revo uninstaller. When missing the usual shit of msi (HPSUPPORTSOLUTIONSFRAMEWORK - 11.51.0049.msi) is come, I clicked on ok and let Revo do its thing and check the registry. When you are prompted to check the 'fat' records I've done and deleted (just check it out those / "BOLD"). When I finished, I reinstalled the HP solutions on the HP site framework and I was in service yet. Thanks to all who have shared and posted.

• HP Pavilion 11-n010dx x 360 PC: HP Pavilion PC 11-n010dx x 360 stuck key?

  When the system starts up happens immediately with the box of volume indicator on the screen which indicates the maximum volume of 10.  Try to reduce or cut the output by using the keys on the keyboard volume control does not work.  It behaves as the volume indicator is constantly updated and the mute for example only he interrupts a moment, then returned to full volume.

  In addition, when you tap on the icon to bring up the keyboard on-screen keyboard image flashes on the screen and then immediately goes.  I can't get the keyboard to the screen to stay on the screen.

  I reloaded all the keyboard and audio drivers with copies downloaded from HP.  No change.  If I disable the audio device in Device Manager I get the volume on-screen box go away.  Otherwise, it is always present.

  Isn't that some kind of hardware problem?

  This should help:

  http://support.HP.com/us-en/document/c03738933

  Also check operation of the equipment:

  http://support.HP.com/us-en/document/c03463381

  If the test fails, then call HP to configure a service.

• The file or directory is corrupted or unreadable

  I have a number of empty folders on an external hard drive that I want to delete. I managed to delete the files in these folders individually, but get the following message... "' Can't delete # the file or directory is corrupted or unreadable", when I try to delete the files. "  I tried to delete it by Total Commander without success.  Your help is greatly appreciated.

  Sometimes corrupt files/folders can be repaired by a 'chkdsk' disk check operation while specifying the "/ R" or "Repair" option...

  "How to perform the disk error checking in Windows XP"

  <>http://support.Microsoft.com/kb/315265/en-us >

  It is a good operation realized in a regular maintenance of your computer and any time that the disc problems are suspected.

  HTH,

  JW

• What's wrong is my disk in disk management?

  C: drive is for system

  D: drive is to documents

  E: drive is for backup

  After buying a new HARD drive and assign with drive F:, I copy the old D: disk in drive F:.

  Shut down the computer; power off. Disconnect the old drive (now D). Connect the new drive (now a copy of the old D). Power and boot to the desktop. Go into disk management and make sure the drive that contains Windows, the original C drive is always c. assign the new drive as D. Reboot the desktop. Check operation.

  Shut down the computer; power off. Plug the old drive. Restart the desktop computer. Enter Disk Management and assign it to E.

  Referring to a following linked picture, E: drive (old drive D :) is used, I have no idea of what is happening?)

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  http://I1093.Photobucket.com/albums/i438/junk000/disks.jpg

  If you do not format the drive E:, there again all the data that was originally on the "old d.

  In disk management, right-click on the drive and choose format, to clear all data.

• How to change the drive letter with installed applications?

  My window is installed on the C: drive, and the application is installed on the D: drive,

  I just buy a new HARD drive and put it into drive E:, everything is copied from drive D: to E: drive and want to switch between the letter D: and E:.

  I tried to put in DISKPART, but when I restart my XP, the drive letter remains the same,

  If I change the drive letter directly in XP, it cannot be changed, because the applications are running.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  Make sure any DVD/CD or USB keys are not connected or set F assignments or beyond (MY DVD is S & T).

  Shut down the computer; power off. Disconnect the old drive (now D). Connect the new drive (now a copy of the old D). Power and boot to the desktop. Go into disk management and make sure the drive that contains Windows, the original C drive is always c. assign the new drive as D. Reboot the desktop. Check operation.

  Shut down the computer; power off. Plug the old drive. Restart the desktop computer. Enter Disk Management and assign it to E.

  Restart, then check the operation.

  Tom Ferguson

• Storm affected my computer - I am now unable to open all Control Panel items

  A month or there we had a big storm in our area that has lightning.  My computer is plugged into a power strip surge.  After the storm, I was unable to open everything in the control panel.  This includes sound, displaying the desktop, add/remove programs, etc..  Help, please!  What should I do to fix this?  Thank you!

  It seems that you were lucky enough to make your computer is above all functional.  The most comman damage caused by a power outage unexpectedly sudden or a lightning arrestor are due disc disruption of power file system corruption when writing to disk.  The first step should be to perform a disk check operation.  Fortunately, this does not mean the control panel.  When you perform this check, specify the options/r or f if you use the command line or the two boxes if you are using the GUI.  He will complain that it cannot check until you restart.  Simply answer 'Yes' then restart your machine.  WARNING: a complete check-up can take hours and cannot be interrupted.  Progress bars are not always accurate.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  If you still have problems after that, try to make a system restore using a restore point dated before your storm.

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >

  If you have problems with the restoration of the system, try to make it go a start secure (repeatedly tap the F8 key during startup key).

  HTH,
  JW