Assistance needed with the Japanese police

Similar Questions

• I created a pdf form to a Word doc with the air police 9 pt formatted; the text on the pdf form is air 9 pt, but the fields are formatted in courier 12 pt - how can I reformat the police in the fields?

  I created a pdf form to a Word doc with the air police 9 pt formatted; the text on the pdf form is air 9 pt, but the fields are formatted in courier 12 pt - how can I reformat the police in the fields?

  Edit the form fields so that they use Helvetica by 9 points. Do not set the Arial font. Acrobat/Reader will use a private version of Arial as a substitute for Helvetica. If you specify Arial, it will integrate the entire police (sometimes several times), makes that increase the file size unnecessarily.

• Problems with the Japanese IME

  I have installed the Japanese IME on windows 8 on a week, then suddenly yesterday, it has stopped working, and instead he just started displaying Chinese radicals instead of Katakana and Hirangana. I tried to re - install, but it did not help.

  Hello

  Please answer a few questions, so that we can diagnose this problem properly:

  1. what is the make and model of the computer?

  2 you receive error messages or codes?

  3 did you do changes on the computer before this problem?

  Since you've already tried to reinstall the EMI, let us check if the problem occurs in Safe Mode and the clean boot.

  Method 1: Start the computer in Mode safe.

  Safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started.

  Follow the link below to learn how to do it.

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  Method 2: Run the clean boot.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a clean boot. A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot:

  http://support.Microsoft.com/kb/929135

   

  Note: Please refer to the section: How to reset the computer to start as usual after a clean boot troubleshooting the KB article to start the computer to a normal startup after you fix the problem.

  Please get back to us with the State of the question.

• Assistance needed for the registration of the application and store the values in a table

  Hello

  Hope that this explanation is not confusing. I explained my application you want in the text below and also attached a skeleton VI + screenshot hoping that he will clarify

  I try to do a VI that does the following:
  1. some code (blue Subvi) runs every 200ms
  2. every 200ms, a random number is generated
  3. the random numbers are stored in a table in intervals of time s 0.8 ("iterations")
  4. at any time, the (blue Subvi) code needs to have access to the random numbers generated in 'the previous iteration.

  To clarify, the iterations are as follows:
  Iteration #1: 0 - 1.8 s
  Iteration #2: 2 - 2. 8 s
  Iteration #3: 3 - 3.8 s

  Iteration #4: 4 - 4.8 s
  ..
  And so on...

  So for each iteration: the blue (Subvi) needs to have access to the random numbers generated in the previous iteration, for example:

  Iteration #1 (0 - 1.8 s): The blue (Subvi) Gets an array that contains only the zero (random numbers are recorded for the first time)
  Iteration #2 (2s - 2 8 s): The code gets an array containing random numbers of iteration #1
  Iteration #3 (3 s - s 3.8): the code gets an array containing random numbers of iteration #2
  Iteration #4 (3 s - s 3.8): the code gets an array containing random numbers of iteration #3
  ..
  And so on...

  At any given time in time;
  -The code gets an array that contains all the random, recorded during the previous iteration numbers
  -Values since before her previous iteration are ignored and not stored anywhere

  Thus, for example, to the #7 iteration:

  -The values during the iteration #6 are made available to the code in the form of a table

  -Values of #1 to #5 iterations have been deleted and not stored anywhere

  It is important that all values since before recording the previous iteration are deleted because they are not necessary because VI actaual will work for a long period of storage of numbers a lot more than I have indicated here

  Screenshot of the skeleton VI:

  

  I tried to play with the paintings, the structures of the case and the registers at offset, but everytime I try I get something wrong

  The skeleton VI is also attached (Iteration_VI and Code_SubVI)

  Any suggestions?

  Thank you!

  Yes, I agree that you need help.  First of all, you really do need to learn more about LabVIEW - spend a few hours with the tutorials, such as those mentioned on the first page of the Forums.  Oops - links to the tutorials which had been present for years seem to have been moved "elsewhere" with August 2016 LabVIEW community reorganization.  But look for them...

  Here are a few screws that basically implement what I described above (with some minor modifications).  First of all, this is a Top level VI which runs at 5 Hz (200 msec waits).  It starts with an array of 5 elements of 0, then once per second, this is replaced by a table of random numbers generated by the Random 5-table sub - VI 5 elements.  Note that I do not use a loop timed - those who are really designed for LabVIEW RT, but use the simplest functions on the Palette of the timer.

  

  Can't you see how that works?  The array to initialize on the left begins you with a table of 5 elements of 0.  The Timer inside the loop, it runs at 5 Hz, 'Index' counts 1, 2, 3,... to tell you where you are, and 5 shows you everything that lives on the shift register.

  Now sub - VI Random 5-table is supposed to do the following - if she was called to 5, 10, 15,..., it must return a (new) array of 5 random numbers, otherwise, it must return the array that was passed in.  So if all "works", table 5 shows 0, 0, 0, 0, 0 for the first second, a table at random for the second second (which is not superfluous!), a different for the third random picture second and so on.  I have already said a way to build this, but I chose a slightly different method (equivalent).

  

  Whenever it is called, a new random element is generated and added at the end of a (growing) random table stored in the shift register.  If size become 5, we send this Random-table-of-5 out through Out table and reset the register shift to an empty array.

  The case by default (when the size is not equal to 5) is shown below - we just return the array of entry to and accumulate new random table in full growth.

  

  These code fragments extracted from VI.  If you have LabVIEW 2016 (see the "2016" at the top right of the image?  This shows that it is a snippet of code LabVIEW 2016), you can open a blank diagram and drag this image, where magic OR converts it to a VI.  Otherwise, the code yourself and try out it.

  Caution - it is designed to run once.  If you run the program of high level, a second time, you may find that the new Random 5 - table appears to 0.4 ", 1.4", 2.4"(instead of 1", 2 ", 3").  I leave as an exercise for understand you to (a) why he is and (b) fix the code.  If you can't do that, then move an another 3-4 hours with the LabVIEW tutorials (or start playing with this code, edit it in some small way and to understand how it works).

  Bob Schor

• Assistance needed with plane

  Hello

  In my project, I have several places. When the mouse is flown over these squares, I want them to change color and when the mouse is removed, I want to change them back. I managed to achieve this by creating copies of the squares with a different color and then display and masking properly with simple show and hide a code, but this caused some problems. Therefore, I wonder if this can be done by code, perhaps with the: hover selector CSS or any other means. If so, I would be very happy to know how this could be done.

  Thank you very much

  Dee Roberts

  It seems that everything you want to do is the following:

  http://DL.dropbox.com/u/9159616/squares.zip

  You can do this by using the code in the manner suggested by Tim. But doing this without code is actually very easy for me. Simply create a square > convert to symbol > animate the color > add with sym.play(1000) mouseenter and mouseleave with Sym.PlayReverse > duplicate symbol (not copy and paste). Then go to each symbol and change the color.

  Hope that helps.

  Adam

• Urgent assistance needed with reminder please!

  Hey guys. I am very confused at the moment and really need help ASAP please! I created a DVD of marriage and after I burned the disc in reminder (CS5.1) project, then put it in my PS4 play, everthing seems blurry and low resolution! My menus of the title does not appear in high resolution, as when I checked before with just my USB connected to the back of my TV... the image is perfect. However, via the disc, he seems to have lost a lot of quality and sharpness. Help would be appreciated.

  Thank you.

  You probably have a bad installation/activation of SOUL. I would point out that screenshot (left) in the forum of the SOUL. Look at help-> and to report to the version that you have. Also the version of PR.

• Police Auto-modifications of the Japanese police?

  I review some drawings that were created with an older version of Illustrator (CS4 or 5), and when I type in some places police will change in "Adobe Ming Std L." if I try to type with this font with PLUGS in it will just type the symbols. If I remove the CAPS and hold down the SHIFT key it types letters, but they are in a strange font. Once I type in this strange font it does allow me to change it to something else.

  Can someone tell me how to prevent it from this font Adobe Ming Std L automatic?

  Yes, I try and it did not work.

  I have discovered since the question. On the files that I have problems with, there is an image with text on the artboard is reading as a locked layer. Once I have remove this image I can't change the font.

• Assistance needed with Custom Transaction

  Hello

  I don't know if this is possible or not, but I would be very grateful for any help anyone can offer.

  I wish to have a couple of drop down fields in form following a table after you select a choice from the drop-down list fields, it uses the data selected in the fields in the form to run a query that will empty the existing table and insert new records.  Although I intend to do it on more than one field, I just try on a unique fields for the moment.

  I use a Cusatom Transaction, because I believe that this will allow me to enter SQL which will perform more than one task.  My understanding of this is correct?

  The following code attempts to remove all existing records in the table, then insert new records.  However, an error pops up when I click the button to insert the record.  It seems that the SQL do not remove and insert consecutively in the same custom transaction.

  Is this possible, and if so, can anyone advise me how to do this.  My current SQL code as part of the operation is: -.

  REMOVE TempAspirationalRole.* FROM TempAspirationalRole;

  INSERT INTO TempAspirationalRole
  SELECT TblRoles.RoleProfile_ID, TblRoles.RoleName, TblCourses.CourseName, TblRoleCourses.Requirement
  OF (TblRoles INNER JOIN TblRoleCourses ON TblRoles.RoleProfile_ID = TblRoleCourses.RoleProfile_ID) INNER JOIN TblCourses ON TblRoleCourses.CourseRef = TblCourses.CourseRef
  WHERE (((TblRoles.RoleProfile_ID) = {AspirationalRoleID}));

  The above will work properly in MySQL if I replace the {AspirationalRoleID} for a real record doesn't.

  Thanks for your time,

  Gary

  At the end of the day, but start with something simple...

  http://www.php.NET/function.MySQL-query

  start deleting Ceccaldi
  function My_Delete(&$tNG) {}

  Get the current values of the form
  $threadid = $tNG-> getColumnValue ('NbForumMessageID');

  $query = "DELETE FROM messagesubscribe WHERE the threadID = '". $threadid. » » » ;

  $result = mysql_query ($query);
  If (! $result) {}
  $message = "invalid query: '." mysql_error(). « \n\n » ;
  $message. = "query string: '." $query;
  $message = nl2br ($message);
  Die ($message);
  }

  Repeat as needed for other mysql queries

  }
  end My_trigger

• Assistance needed for the installation of windows server 2008 r2

  Hello users,.

  I am new to this technology of the virtual environment and I need help in installing windows server 2008 r2 on a machine virtual workstation. For it so what are the recommended setting for drivers, no. of processors, amount of RAM, type of CISS or sata... etc to give the best performance on my virtual machine. If possible please provide me details to my knowledge.

  Thanks in advance

  Are you sure that you have installed a Windows Server 2008 R2?

  Because the normal procedure is that after the installation, you will get a prompt to choose an administrator password. Once you are connected.

  There is no additional user created during installation. This only happens when you install versions of Windows desktop.

• Assistance needed for the scaling of image 1024 x 1024

  Hi all

  I did a VI where I load a 1024 x 1024 BMP file. The BMP is generated by an another VI which is to get a picture of a videostream of my webcam. The raster image gets so grayscale for further processing. My final goal is to make a LV facerecognition

  So when I load the grayscale image I get nothing, but if I use the version 512 x 512, so, I'm able to evolve without any problem.

  I think it's sort of a problem of overflow, but I can't solve...

  Thanks in advance

  24-bit image data are an ara of U32.  If you change the entry in the function Array initialize as a U32 instead of a U8 it will work as long as you notice the depth of the image and use the correct entry to flatten Pixmap.vi.

  I have attached a version that seems to work.

• With the help of a backup on an external hard drive to transfer files to a new computer.

  I recently got a new computer and I need to transfer my files via my new computer. Both computers running Windows 7. I have an external hard drive that has all my files from my old computer on it. I went into the control panel configuration, then system and security, and then in the backup and restore. I then clicked on "select another backup to restore files from" and looked for my external drive. I made sure that it was connected and up-to-date as well. However, he never showed up.

  I would like to manually just transfer the files, but it seems as if there are readers split on this computer for 'BONES' and 'DATA '. For this reason, I'm not sure which car I'd put even files on.

  How can I transfer these files?

  Hello

  I understand that you are having problems with the restoration of the backup files of the external hard drive. Correct me if I misunderstood the question.

  (1) what is the version of Windows 7 is installed on your computer?

  (2) have you made changes on the computer before this problem?

  (3) you receive an error message when you try to restore?

  I suggest you to consult and follow the steps in the links and check if the problem persists.

  Backup and restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

  Restore files from a backup

  http://Windows.Microsoft.com/en-us/Windows7/restore-files-from-a-backup

  I hope this helps. Try the above steps and get back to us for more assistance and with the requested details, if the problem is not resolved.

• Portege A600 Webcam software crashes when changing the settings with the sound muted

  I have a problem with XP Toshiba factory build for Portege A600 and Portege R600.
  If you try to change the sound properties of the Webcam using the Camera Assistant Software with the sound muted, the camera wizard app will hang & Windows fails to shut down or even stop. The only way to stop is pressed the power button until the machine stops.

  So far, the only solution I can come to is to increase the volume to zero rather than using the mute box. The problem is if you forget and mute rather than turning down and then try to change the sound properties, its "game over." In addition, it is not really satisfactory because politics is to keep the machines muted until the sound is required.

  This does not happen with the Vista Build, build it only XP.

  My guess is that this will not happen on any machine using the Chicony Webcam & software with the Realtek HD audio but I have not tried on machines enough yet to be sure. So far, I've recreated on two A600s and a R600. The machines are not defective and you can create the problem, "straight out of the box. Just do the following:
  (1) use the provided Toshiba product recovery DVD for restore factory Toshiba Windows XP SP2 version
  (2) once you have done the whole stuff, mute
  (3) open the Camera Assistant Software application & to select Properties
  4) click the audio settings tab

  That of all, suspended. The Camera Assistant Software version is 1.7.209.0807L which seems to be the last being available for download on the websites of Toshiba.

  Someone has encountered this or have any suggestions?

  Hello

  I n t have a Portege but U400 with pre-installed and integrated webcam Win XP.
  I installed a clean Win XP and then upgraded the XP to the last State and installed all the drivers available from the Toshiba page and possible.

  I followed the steps in your message and I have to say that I didn t notice strange questions, software webcam still works correctly

  I put t know what could be the problem, but I recommend that you check the audio driver to update maybe you can use the Realtek page
  Also, check if the BIOS has been updated to the current state and if your Windows XP is up to date.

• HP Support Assistant - problem with shortcut

  I have the problem with the HP Support Assistant, when I open the shortcut on the desktop, I get the error: "the element 'HPSF.exe' that this shortcut refers has been changed or moved, and this shortcut no longer works correctly. You really want to remove this shortcut? »

  I'm tempted to open it from the beginning, the same thing happens. I don't know what happened with the HP support assistant and with the shortcut. I am not be reinstalled HPSA. I did nothing, I don't know how it happened.

  Do I have to reinstall HP Support Assistant or can I fix? What should I do to fix this?

  I'm using Windows 7 Ultimate 64 bit.

  Hi Licpa,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your laptop and have the HP Support Assistant with questions. Here is a link to uninstall the HP Support Assistant software. You can reinstall it here.

  I hope this helps.

  Thank you.

• How to remove the old policies of approval?

  Hello

  We did some tests with the approval policies and now we would like to delete those that are not quite right or failed.

  Unfortunately, I can't find a way to do it. If the strategy approved in draft form, it can be deleted, but once it has been set as active (or inactive) it doesn't seem to be a way to remove them.

  What Miss me? How do you remove the old approval policies (which are not project)?

  vRealize Automation 6.2.1

  It is not possible to remove a trust strategy in any version 6.x of vRA. You can set it as inactive if you no longer want to use it.

• Calculate the % with the pivot table columns

  I created an application with these columns:

  Metric       Study          Fast          Slow       On-Target     Total
  ---------------------------------------------------------------------------------
  Metric1     Study1           1             0              0             1
  Metric1     Study2           1             0              0             1
  Metric1     Study3           0             0              1             1
  Metric1     Study4           0             0              1             1
  Metric1     Study5           0             1              0             1
  Metric1     Study6           0             1              0             1
  Metric1     Study7           0             0              1             1
  Metric1     Study8           0             0              1             1
  Metric1     Study9           1             0              0             1
  Metric1     Study10          1             0              0             1

  I want to create a pivot table looks like this.

  Metric          Fast     Slow      On-Target     Total      % Fast     % Slow   % On Target
  ------------------------------------------------------------------------------------------------------
  Metric1         4           2        4            10           40        20       40

  The fast, slow, on the target and Total columns are calculated fields. Picky, I'm having is to get the % columns to work. I also tried create columns % in the form of columns of the table, but at each level of study, the % is 100% or 0%.
  
  I tried with duplicate columns, all different options to display the value as. None of them worked.
  
  Could someone help me? The version of the OBI is 10.1.3.4
  
  Thank you
  
  Shi-ning
  
  Published by: SPUD on November 21, 2011 23:09

  Sounds like it. You will need the account of studies as a measure in the criteria. You could do something in the repository, but the fastest way is:

  Criteria:
  Add the study in (it will not go into the PivotTable)
  create new measure based on any existing measure that has the background you need with the formula:
  cases where [existing] is not null then 1 else 0 end

  This will give you 1 for each line that your measure in effect is valid. Add this new measure in the PivotTable and treat it as a normal amount.