At the end of the first export freezes for a few minutes
Hello
my computer is an i7 4930 K @4, 5 GHz, 16 GB RAM, 250 GB SSD, Radeon 6950.
I just changed a 50 minute long film (cca 20 GB of sources, cca items 4, 5 GB output film).
Export is very arrived after 25 minutes but then first frozen with the message "coding, 0 seconds remaining" poster and nothing seemed to be the case.
I realized the HARD drive activity shone (not blinking), resource monitor reported Widnows cca transfer of 70-100MB / s on my SSD (even if I think that my SSD should be faster) and when I held F5 while looking in the directory to the output file export grew on the ability.
If I would consider 70 MB/sec in writing task shloud be done in CCA 1 minute. But it took I would say 5 minutes or even more to complete this task. RAM has not yet fully used.
This behavior is normal?
How can I improve this? My SSD is slow?
Thank you
What are your export settings?
I think with some export formats, if you encounter the audio multiplex, the progress bar does not account step of multiplexing, so he's going to do after finishing the coding stage.
Tags: Premiere
Similar Questions
-
I rebooted and turned power off the computer several times and always get the same message. The size of the text on the screen and the icons are larger than the way in which they should appear. How can I solve this problem?
Consult the manufacturer of your so great PC OEM, for example Dell / HP or laptop and install the latest drivers.
If a visit generic PC your graphics card maker or manufacturer of the motherboard and install drivers lates
Do NOT get the drivers of MSUpdate -
A sound signal at the top of the package after the first export?
Hello
Im getting a beep at the top of the package after the first export. I continue to have export packages a second time. Usually on the second attempt the beep has disappeared.
No idea why this is happening?
R
Philippe
Hi Philippe,.
Im getting a beep at the top of the package after the first export. I continue to have export packages a second time. Usually on the second attempt the beep has disappeared.
No idea why this is happening?
No, you can work with support to resolve the issue.
Thank you
Kevin -
What are the best export settings for a first Pro CS4 video HD?
Hello!
I had so much trouble with this issue and that's something that continually frustrates my boss. I have a HD video what are the settings for it
23.98 FPS
1920 x 1080, then a few lines down he says 1408 x 792
16-bit,
2 channels
48000 Hz
What should be the parameters when I do a new sequence?
When I look into the window in Premiere Pro I constantly have to "shrink" the image to fit the window, is that something I should do or he says that the configuration of the sequence is bad?
But more importantly what should be the parameters of export? I exported a long video of 4 minutes and the size was 1 GB, I know that it's too big.
I need to export without losing quality and export another one which is consistent with the limits on the size of Youtube and Vimeo.
Vimeo is 500 MB per week, sometimes I download 4 videos per week. I think that Youtube, you can download 500 MB at a time.
I need to get the smaller size with lose the least possible quality AND the best export quality settings, so I suppose I have 3 separate issues.
What are the best settings of sequence for HD video?
What are the best export settings for HD without losing quality?
What are the best export settings for the size of out about 500 MB with losing the least possible quality?
Thank you!
http://forums.Adobe.com/thread/713070
On the thread that above, I used the 5th anwer, and it will take about 7 hours to export a 4 minute video :/
All your questions are answered here.
http://forums.Adobe.com/community/premiere/faq_list?view=discussions
-
When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?
Disable the iMessage?
-
roar of hard disk and the computer freezes for a few seconds
My hard drive makes a sound whirring for a few weeks now and when I type in emails or messages like this, the computer freezes for a few seconds. Any ideas how to fix this?
A desktop computer. Your problem could be overheating.
You must remove the side panel right and remove dirt dust bunnies fans. Also, make sure that all the fans are working. Safety switch the computer off and pull the power cable before removing the side panel. You can then move the computer backon and check that the fans are working.
Then, turn off the computer and some time for that cool. It is best to use a wrist band, which you set on the casing of the computer to you the earth before touching anything inside the envelope. You can buy one in a store of computer accessories. Static electricity can damage a motherboard if you don't take precautions.
Then, you use a small brush to remove the sheep of dust around the fan on the processor. I used an electric razor, cleaning brush. I use an Air blower to clean the power supply fan. An air Duster is also useful fopr cleaning keyboards.
Removal of the dust bunnies should reduce the noise that makes your computer. It can also reduce overheating, which can lead to errors of Blue Screen of Death.
Another way to check the hard disk to see if it is overheating is to use HD Tune 2.55 (free):
http://www.hdtune.com/download.htmlYou have to scroll the page to see the freeware version.
-
Wanted: The best free tutorials online to learn the first Pro CC for beginners (no experience) edit. Please post links. Thanks, JR
XXJR2013XX wrote:
Wanted: The best free tutorials online to learn the first Pro CC for beginners (no experience) edit. Please post links. Thanks, JR
Hi XXJR2013XX,
I like this one, if you start from scratch: https://helpx.adobe.com/creative-cloud/learn/start/premiere.html
Thank you
Kevin
-
How to find the first max value for each item
Hello
I have the me_result of the table as below,
SELECT * FROM me_result;
ID ||| ELITE ||||||||||| FREQ_ITEM | COMBINED_STR | SUP
1 ||; 1; 10; 2; 3; 4; 5; 7; 8. 1 ||||||||||||||; 1; 10; 2; 3; 4; 5; 7; 8 ||| 2
2 ||; 1; 10; 2; 3; 4; 5; 7; 8. 2 ||||||||||||||; 1; 10; 2; 3; 4; 5; 7; 8 ||| 2
3 ||; 1; 10; 2; 3; 4; 5; 7; 8. 3 ||||||||||||||; 1; 10; 2; 3; 4; 5; 7; 8 ||| 2
4 ||; 1; 10; 2; 3; 4; 5; 7; 8. 4 ||||||||||||||; 1; 10; 2; 3; 4; 5; 7; 8 ||| 2
5 ||; 1; 10; 2; 3; 4; 5; 7; 8. 5 ||||||||||||||; 1; 10; 2; 3; 4; 5; 7; 8 ||| 2
6 ||; 10; 2; 3; 4; 5; 8; 9. 1 ||||||||||||||; 10; 2; 3; 4; 5; 8; 9; 1 ||| 1
7 ||; 10; 2; 3; 4; 5; 8; 9. 2 ||||||||||||||; 10; 2; 3; 4; 5; 8; 9 ||| 2
8 ||; 10; 2; 3; 4; 5; 8; 9. 3 ||||||||||||||; 10; 2; 3; 4; 5; 8; 9 ||| 2
9 ||; 10; 2; 3; 4; 5; 8; 9. 4 ||||||||||||||; 10; 2; 3; 4; 5; 8; 9 ||| 2
10 ||; 10; 2; 3; 4; 5; 8; 9. 5 ||||||||||||||; 10; 2; 3; 4; 5; 8; 9 ||| 2
I need to find the first COMBINED_STR max for each element of the ELITE,
I mean, max value is the max REGEXP_COUNT (combined_str,' ;')))
really, I try to write down, but I had a lot of values for each ELITE and I need only the first, that
SELECT * from me_result
WHERE (ELITE, REGEXP_COUNT (combined_str,' ;')))) IN
(SELECT ELITE, MAX (REGEXP_COUNT (combined_str,' ;'))))) ME_RESULT ELITE GROUP);
I need the result to be as below.
1; 1; 10; 2; 3; 4; 5; 7; 8-1; 1; 10; 2; 3; 4; 5; 7; : p
6; 10; 2; 3; 4; 5; 8; 9 1; 10; 2; 3; 4; 5; 8; 9; 1 1
any help please,.
Published by: user11309581 on July 10, 2011 22:03Can be
with t as (select 1 ID, ';1;10;2;3;4;5;7;8' ELITE, 1 FREQ_ITEM, ';1;10;2;3;4;5;7;8' COMBINED_STR, 2 SUP from dual union all select 2 ,';1;10;2;3;4;5;7;8' ,2 ,';1;10;2;3;4;5;7;8' ,2 from dual union all select 3 ,';1;10;2;3;4;5;7;8' ,3 ,';1;10;2;3;4;5;7;8' ,2 from dual union all select 4 ,';1;10;2;3;4;5;7;8' ,4 ,';1;10;2;3;4;5;7;8' ,2 from dual union all select 5 ,';1;10;2;3;4;5;7;8' ,5 ,';1;10;2;3;4;5;7;8' ,2 from dual union all select 6 ,';10;2;3;4;5;8;9' ,1 ,';10;2;3;4;5;8;9;1' ,1 from dual union all select 7 ,';10;2;3;4;5;8;9' ,2 ,';10;2;3;4;5;8;9' ,2 from dual union all select 8 ,';10;2;3;4;5;8;9' ,3 ,';10;2;3;4;5;8;9' ,2 from dual union all select 9 ,';10;2;3;4;5;8;9' ,4 ,';10;2;3;4;5;8;9' ,2 from dual union all select 10 ,';10;2;3;4;5;8;9' ,5 ,';10;2;3;4;5;8;9' ,2 from dual ) select ID,ELITE,FREQ_ITEM,COMBINED_STR,SUP from ( SELECT ID,ELITE,FREQ_ITEM,COMBINED_STR,SUP, ROW_NUMBER() over (PARTITION BY ELITE order by id) RN FROM t WHERE (ELITE,REGEXP_COUNT(combined_str,';')) IN (SELECT ELITE,MAX(REGEXP_COUNT(combined_str,';')) FROM t GROUP BY ELITE) ) where RN=1 order by id ID ELITE FREQ_ITEM COMBINED_STR SUP ---------------------- ----------------- ---------------------- ----------------- ---------------------- 1 ;1;10;2;3;4;5;7;8 1 ;1;10;2;3;4;5;7;8 2 6 ;10;2;3;4;5;8;9 1 ;10;2;3;4;5;8;9;1 1
-
Photoshop CS5 freezes for a few seconds on a long press on the tools.
Hello
I'm experienceing a strange on Macbook Core2Duo Pro and Macbook Air 13 ", MBA, I bought last week.When I long press any tool in the Toolbox to develop it, photoshop CS5 freezes for a few seconds.
Any idea?
PS: I tried both CS5 and CS5.1 on OS x Lion 10.7.2. I posted this question to Apple to the forum one day there is no answer yet.
Kind regards
WassimYou have installed Zoom right?
http://feedback.Photoshop.com/photoshop_family/topics/switching_between_grouped_tools_caus es_freeze
-
SQL: How to select the first telephone number for the Service to find?
Hi, can someone help me difficulty this query?
The problem is - ID is left with no phone number, a phone number and phone number. My requirement is to choose only first phone numbers and NULL values if a party who has more than one phone number. The query below is correctly picking of NULL values and unique phone numbers but also by selecting all the phone numbers for the id of group 13909 which has 3 phone numbers
It involves choosing the first phone number 416-890-0089 and limited to 416-960-8686, 647-456-3040
How to select only the first group id for the parties who have more than one phone number
Thanks in advance!
Select distinct p.party_id,
p.family_name,
p.given_name,
p.Status,
p.type,
above. Value,
PR. Role,
ad.unit_number,
ad.unit_identifier,
ad.street_number,
ad.street_number_suffix,
ad.street_name,
ad.street_type,
ad.street_direction,
ad. City,
ad.province_id,
ad.Postal_Code,
ad. Country_ID,
ad.postal_box_number,
ad.station_type,
ad.station_identifier,
ad.address_line_1,
ad.address_line_2,
ad.address_line_3,
ad.rural_route_identifier,
ad.rural_route_type,
ad. Status,
ad. ADDRESS_ID,
ad.attention
part p, ad address this contact_information, party_contact pc, pd, pr SR1CUST1.party_role party_address
Where
P.party_id = PD. Party_id
AND AD.address_id = PD.address_id
and p.party_id = pr.party_id
And (CI. Contact_Mode 't ='
Or CI. Contact_Mode is null)
AND P.party_id = PC. Party_id (+)
And PC. CONTACT_INFO_ID = this .contact_info_id (+)
AND AD.address_type = 'P '.
and P.type = 'B'
and pr.role = 'C '.
and p.family_name like '% Lew '.
and as p.given_name ' J %
Order by p.party_id ASC
Response
1478 null
1479 null
1577 null
1712 null
1822 null
6346-647-345-7384
6347 416-890-9384
6348 519-897-0089
6832 416-930-1265
8733 647-976-8923
13909 416-890-0089
13909 416-960-8686
13909 647-456-3040You can simply use one group from all other columns that the phone number and then choose the min (phone_number):
select col1, col2, ... coln, min(phone_number_column) from yourtables where yourconditions group by col1, col2, ... coln;
-
Just updated LR 4-6, so I find lightroom does not not like before. LR 6 is very slow at the start, whenever I pass 'Library' to 'Develop' or import images, the Apple beach ball will roll for a few minutes first. My iMac uses OS X version 10.10.5 are all these compatibility issues? What should I do to make it work better the lightroom?
Please take a look at the article and follow: https://helpx.adobe.com/lightroom/kb/optimize-performance-lightroom.html
-
When I use HDMI to connect my macbook to the TV - it lights for a few seconds, then disappears?
I tried all 4 HDMI ports
my computer is 2013 macbook pro retina - tv is a 1 year old samsung
Try this support article > use your TV as a monitor
If you have an Apple TV, you can use AirPlay to the screen of your Mac on the TV via HDMI.
-
I like to keep an eye open at all times, and Firefox has recently begun to spoil my tabs while I've never had a problem with this before. I think it started after the last update of Firefox.
As mentioned above, if a tab remains open but unused for a few minutes while he was working in the other tabs, logo of the site next to the title of the page (for example Amazon 'a' logo with the arrow below "Your orders" for example) is replaced by the green rotation ring that usually indicates the loading, but it runs a lot faster that it did when it actually does something. When you click on the tab to open it again, it's just a blank tab and I have to manually track down the page that I was again. However, when I disconnect my computer or restart it so that the legs have the rings of green spinning on them, the next time I open Firefox once connected to my computer, it opens all tabs and the correct pages, but that if I did not click on / open one of the tabs so that they had the ring of green rotation thus making their return to blank tabs. If I click on a tab with green spinning ring (making it empty), then log start/stop and reopen Firefox on connection back to my computer, Firefox will have indeed lost the information on the page and he re - opens in a blank tab, as it was when the system is disconnected. On top of that, if the tabs are doing this fast spinning glitch green ring, he did everything I'm working on the slow race, such as making a video shift watching on Youtube. If I see that happen, I am obliged to go click on the tab (loss of his data in the process) and manually go back to the page, that I was still just once so that it stops make the green ring of fast rotation and I can watch my video smoothly, but it lasts only a few minutes before these pages start the glitch green ring once more and I have to repeat the process. Another oddity of the note is that this only happens to the tabs actually, I click on and open during each session. If I restart or disconnect my computer and connect again and restart Firefox, the green ring glitch does not reach one tabs I don't touch during my session. It happens to the tabs that I actually open this session, but it happens to every single tab that I do, I opened this session.
It becomes very irritating and it's working in Firefox a huge concern, as happens constantly. Please fix this. Firefox has never done this to me before, so I don't understand why it's happening now. I have not downloaded or installed the new plug-ins or add-ons for Firefox, so I know I did nothing to the program to cause this.
Thank you for picking me up in it. I look forward to hearing back as soon as POSSIBLE and to find a cure for this problem. This glitch is driving me crazy.
The current versions of Firefox use the sessionstore-backups folder to store a few copies of the sessionstore file to make it possible to recover a few errors caused by a bad closing down.
The 'upgrade.js with the attached version identifier are created when Firefox is updated.
Previous versions of Firefox created the file sessionstore.bak with the attached version identifier.
So that look OK.You can start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.
- Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
- Do NOT click on the reset button on the startup window Mode safe
- https://support.Mozilla.org/KB/safe+mode
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
Could you possibly post your troubleshooting data?
-
Relatively new MacBook OSX El Cap 11.4
My internet connection is lost at home after a few minutes. I stop the wifi, then turn it back on and it works again for a few minutes and then repeats. It works fine everywhere else?
Please see recommended settings of WiFi routers and access Apple points.
Despite these recommendations, some routers will work better with the latest Mac models if you turn the radio 2.4 GHz mode in settings and only use the 5 GHz. Note, however, that very old devices Apple and some third-party devices can then not connect at all.
Some third party routers have advanced that you may need to change the settings:
The encryption algorithm must be AES.
The group key interval must be 3200.
I can't give you specific instructions on how to change these settings, because all routers are different. Refer to the documentation for the provider.
-
Satellite P30-110: the screen is blank, after working for a few minutes
Hello.
Can anyone adivse if they have encountered this problem before. After you start the system and worked on the laptop for a few minutes, the screen turns white as if the system is in standby mode. The only way to put it back on is by pressing the power button and everything continues normally until the problem reoccur.
I have been informed that there may be a button faulty hibernation cela but surely you would say on the screen if the machine was going into hibernation with the usual calendar bar? And the fact that the screen turns back on as soon as you press the button shows his vigil no hibernation.
Any adviser who can offer are welcome. If you need more information about the problem please let me know.
Thank you very much
Hi Paul,.
If it is just the screen becomes black, but everything else seems to work fine, so I think that your FL inverter may be defective. This is the device that provides the lighting of the screen.
I suggest that you only contact your nearest ASP for further diagnosis.
Kind regards
Maybe you are looking for
-
Can not find the latest Firmware for QX10
I got an automatic notification that there is an update of firmware for my QX! 0 a couple of days. I did not take in the details then. However when I search the site Support of Sony, it only refers to an update in dated date in 2014. Does anyone know
-
How to connect my iPhone to my car bluetooth 6
How to connect my iPhone to my car bluetooth 6. I got my old iPhone 4 pair, but can't do the car (Toyota Camry 2009) to recognize the new. Any tips?
-
I try to import data that is written/modified in excel in labview. I want to save the file in XML format and then import it into Labview during execution of rpgram. Is there a simple way to do this without writing a lot of custom parsing code? Exc
-
Hey, I'm trying to install NOR / CVI version 5.5 for windows lab in the goals of Windows 7 ultimate (64 bit) its display of installation error. Is that this version is not compatible with the newer version of windows? Please give me suggestions.
-
Hi all A group of us at my college want to recycle PCs of the community non-profit as a project of hands training material. Ant ideas on issues of license if the ID licenses orginal for PC and operating system is used? Who or how to be Microsoft to k