Computer with vista freezing to the configuration of updates.

Similar Questions

• At the start, my phone freezes on the configuration of updates and restarts

  At startup, my phone freezes on the configuration of updates and restarts. It won't let me even put my password. Automatically, it restarts and continues to do the same thing over and over again... I need help!

  What were the results of the test of the hard drive?

  It seems that things go too far and you need to perform a factory restore and reinstall the files on your system.

  Repeatedly press the F11 key at startup to enter the Recovery Manager, and then follow the instructions.  I hope that the recovery partition is not damaged.

• I have a new computer with vista home, I also have 20 updates failed with code 80072EFD. I tried everything I can think of others then do a full restore. Help.__Thanks, __Wally

  I have 20 windows updates failed on my new computer with code 80072EFD and tried everything I know. Its still new with few programs on it so I could do another full system restore if I have to. I also have a free windows 7 for this computer that is always on its way. If I fix this now I will do all that again?
  Wally

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Windows Update error 80072efd
  http://windowshelp.Microsoft.com/Windows/en-us/help/93b6ab71-8B21-4B50-B40E-abb80eba29271033.mspx

  I guess you're running Vista.

  As for your 2nd question about the updates of Windows - Win 7 If you run Norton, you might have a problem. It can accept updates for Vista, but when you upgrade to Windows 7 it does not updates allow.

  TaurArian [MVP] 2005-2010 - Update Services

• Laptop computer with Vista license key, XP, want to update.

  I bought a used laptop that had a strange version of Frankensteined of Windows 2000/XP/Vista. I don't know what was going on with this but the BONE is not hardcore, and I had to do a fresh install of XP. The problem is that I can't get my hands on a valid install disc, so XP doesn't really work for me.

  The laptop has a license key for Vista, so I guess it's the os that is installed on it. The license key is still valid? I'm hoping to be able to install or upgrade to (if possible) Vista, so that the thingimajig Validation of Windows stops to mess up my computer and I can get all the necessary updates.

  Call the manufacturer of your laptop to see if they will provide the recovery discs, usually that they will, for a small fee

• This summer, I bought a computer with Vista. Will I get a refund for the upgrade to Windows 7?

  This summer, I bought a computer with Vista.  Will I get a refund for the upgrade to Windows 7?

  See: Frequently asked questions - Upgrade Options
  http://www.Microsoft.com/Australia/Windows/buy/offers/upgrade-FAQ.aspx TaurArian [MVP] 2005-2010 - Update Services

• How can I get Microsoft Train Simulator to work on my computer with Vista?

  Hello
  I installed Train Simulator on my computer with Vista about two years ago and I was never able to make it work. The game installed on my computer, but whenever I click on it to play it will work out fine until it gets to the main menu of the game page, then it will just completely freeze and stop working. I've tried everything to run I tried to run in Computability with Windows XP mode and it will still do the same thing, I even tried to uninstall and reinstall the game and who does not either because it will freeze just when the window displaying the initialization of the installation or uninstall initialization program opens and it's the end of this. If its basically as I installed it on my computer but I can't do anything with it I can't play, I can't try to fix it and I can't even uninstall it. So is my question possible that maybe I can get Train Simulator to work properly on my computer?
  Thank you!

  If it freezes completely like that, it may be a hardware conflict any.  I heard similar things regarding the sound card drivers.  I would check to make sure that you have the latest audio drivers on your computer and also make sure your graphics drivers.  Usually your machine must not only freeze whatever the program itself, unless you have a driver problem.

  Notes I've read, people get the game to work by mode of compatibility you tried (even if some have used Windows 95 and not XP compatible) and at the launch of the game, they choose "Run as Administrator" by clicking on the launcher and choosing it.

  Try and see if you have a little better chance

  K

• I bought a new computer with Vista laptop Sunday I am suppose to get a free upgrade to Windows 7, but I don't know what to do. Please help me.

  I bought a new computer with Vista laptop Sunday I am suppose to get a free upgrade to Windows 7, but I don't know what to do. Please help me.

  Contact the manufacturer for instructions on registration, get your free update to Win7.

  PS: We deal with Windows Update here. For any question related to upgrading to and installing Win7, post here: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• I have a desktop computer with Vista business I want to upgrade to Windows 7 and install Vista on a laptop that has XP Pro but is Vista capable.

  Transfer Vista Business on XP Pro computer.

  I have a desktop computer with Vista business I want to upgrade to Windows 7 and install Vista on a laptop that has XP Pro but is Vista capable.

  Hello

  If you use the Vista licence as part of the upgrade to Windows 7 you cannot use the license of Vista anywhere elsewhere

  It is part of the upgrade process

  and also read this on licensing rules;

  If Windows was preinstalled on your computer, Dell, HP, etc., or you bought an OEM/license disk, they are both classified as an OEM license and are not transferable.

  The Windows OEM license is linked to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  If a retail Windows license, you can transfer it to another computer/laptop.
  But it can only be installed on one computer at a time.

  A single license is a single Installation.

• Can I reformat a computer with vista media center edition on it and thenperform a new installation of xp? I don't like vista?

  Can I reformat a computer with vista media center edition on it and then perform a new installation of xp? I don't like vista and want to go back to xp.

  Hello

  If you have an XP disk and license, you can go back to XP

  but make sure that the manufacturer of your computer has XP drivers available for this model computer

  If you have not an XP license try to buy one at a computer repair shop

  you boot from the XP disc and format in this way:

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  How to perform a clean Installation of Windows XP - Part 1 of 4

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

• Satellite P100-347 with Vista Premium in the United Kingdom

  I am looking to buy the Satellite P100-347, but I want to get with Vista Premium - no upgrade.
  Does anyone know when this machine will be available with Vista Premium in the United Kingdom.

  Thanks in advance

  Joel

  Hello Joel

  I heard that Toshiba will start notebook with Windows Vista at the end of January 2007. Perhaps the United Kingdom will be starts earlier (perhaps it is also a country, I put t know exactly).

  As you know Vista comes with several different versions, but it will be preinstalled on P100, no one can tell you with certainty.

• Is a PCI-6120 card in a computer with linux useful for the analog output?

  We have a PCI-6120, and we want to use in a computer with linux OS, to the analog inputs and analog outputs.  I have downloaded the driver NOR-DAQmx Base 3.2 for linux, and in the file README.txt only analog input is mentioned for this Council. It is possible to use this card PCI-6120 in linux, with output and analog input computer?

  Best regards

  Hey, Gallas,.

  This line in the README file simply refers to the PCI-6120 by its more popular, analog input subsystem (given that it is a simultaneous sampling device, the AI is the most commonly used subsystem). But NEITHER-DAQmx for Linux does not have the same limitations NOR-DAQmx base has. In other words, it supports the ability of analog output on the PCI-6120.

  Kind regards

  Sam

• Dell Inspiron Laptop with Vista installed at the factory does not start.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Dell Inspiron Laptop with Vista installed at the factory does not start. The display shows

  Indicator of treatment MM061 series white 80% in all of the BIOS revision A13 treatment indicator always goes to the same place and stops. I tried to tap the F8 key, but nothing happens.

  If you used Dell or the recovery Partition recovery disks to restore the system, you must talk about Dell problem because it's their software - not Microsoft.  We don't know what's on it or its operation.  We have no information to help us help you.  You need to deal with them.

  Sorry we can't be more helpful.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code.

  I need help to activate my computer but I don't have the code. I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code. I tried to contact the guy but he won't answer. Is it possible to check the activation without the code? I need help and do not want to pay a hundred dollars more.

  Is there a COA sticker that is attached to the machine?

  If so, check to see what edition and version of Windows machine is licensed to:

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  Also:

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Computer with Vista unable to connect to the internet through two computers with Windows 7.

  Dear engineers,

  In our House, we have two new computers Windows 7 connect to Wired internet access.  Our friend came in hoping to play some MMO games with us on our connection (it has windows vista).  When we hung everything upward, by linking to our modem, his computer was visible on my husbands computer, but was visible on mine as a media device.  He could see the two computers, but could not get an internet connection and no viable ping.  We checked the network map and he showed my computer with one? related to my husband then connected to the internet.  Inside, there was an announcement indicating that the following devices are not displayed in the network map.  under of course was listed both our friends media device and the computer device.  I searched Control Panel and gave access to anyone on the login to my husbands system as long as me.  What happens if nothing else can I try to have its system you can connect to our internet?

  Thank you for your attention,

  Cerisea

  Hello

  If a computer is not properly visible it generally means that sharing is not set correctly to match your system.

  You must also set your computers with the computer account of the friend as a user on your computer.

  Everyone does not mean everyone wishing to connect.

  If the accounts are presented only for John, Jill and Jack, setting in the folder with all permissions saves the effort of definition permission separately for John, Jill and Jack.

  Everyone isn't everyone group, only John, Jill and Jack.

  In general.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Transferred files/programs with transfer data from laptop (xp) outlook 2003 cable to another computer with vista... gmail now goes to the original laptop (with xp) but no e-mail again pc (vista)

  "Account: 'pop.gmail.com', server: 'pop.gmail.com', Protocol: POP3, server response: ' 220 mx.google.com ESMTP g31sm1842439rvb.50 ', Port: 465, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC90

  'Test with live mail', account: 'pop.gmail.com', server: 'smtp.gmail.com', Protocol: SMTP, server response: ' + OK GPOP ready for 207.47.226.52 applications c20pf1733534rvf.8', Port: 995, secure (SSL): Yes, error number: 0x800CCC60

  You seem to have transposed port numbers.  According to The configuration Page of GMail, the POP service uses port 995 and the SMTP service uses port 465; your error messages show that you have 995 for SMTP and 465 set to POP, exactly behind what they should be

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com