AT100s Wi - Fi freeze a few minutes after startup

Similar Questions

• Windows Vista (64-bit) crashes a few minutes after startup is complete. Difficult to get out of the lock start.

  After a Windows updated 12/09/2009 from my computer stopped working.  It starts (without error) and then freeze a few minutes after loading Windows.

  I removed all the updates of Windows since mid-November, but this has not fixed the problem.  I also tried to boot to the last known successful configuration and has followed the procedures of "clean boot upward" found elsewhere on this forum.  None of these actions resulted in necessary corrections.

  Any other ideas?

  Hi lizseh,

  Welcome to Microsoft Answers Forums.

  I suggest you to restore the system to a previous state where it was working fine and check.

  To restore the operating system to an earlier point in time, follow these steps:

  1. click on start toreduce this includes this image, type System Restore in the Search box, and then click System Restore in the programs list. Collapse this includes this image

  2. If you are prompted for an administrator password or a confirmation, type your password or click continue.

  3. in the System Restore dialog box, click choose a different restore point, and then click Next.

  4. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  5. click on Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  For more information, please visit the link below,

  http://support.Microsoft.com/kb/936212

  Hope this information helped you.

  Kind regards

  Arona - Microsoft technical support engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My laptop keeps freezing a few minutes after opening.

  Data sheet:

  Acer Aspire EA40_HC model E1

  with Intel Core i3-2348 M @ 2.30 GHz CPU processor

  and Intel HD 3000 Graphics

  Windows 8 Pro

  RAM: 4.00 (2.58 GB usable)

  System type: 32-bit operating system, x 64 based processor

  ========================

  One day, I was playing CS, everything's fine, it works well, I know that my pc is not the best for playing games, I'm running with fps constant of 40-60 which is not obtained, but not bad either. I removed my battery of laptop, but kept plugged in because I know that if you kept it loads during use, it can decrease the life of the battery power. A few hours later in the game, my laptop just turned off. I don't know why, maybe the charger has been moved and unplugged then I checked. He was actually plugged in nice and safe, and I don't think it was the cause of the laptop to turn off or maybe it was. Then I turned on my laptop. Every thing seems fine but the 'Welcome' screen any longer that it was. A minutes and continues the 'welcome' to display. I know something was wrong because who usually took only a few seconds to load. I turned off my pc and opened it again. Nothing had changed, it is still stuck on the Welcome screen. So I waited a little longer, now 3 minutes, I saw the circle of loading thingy is frozen and non-mobile.

  I'm a little worried that I just broke my laptop, I tried a few corrections in the internet, but I can't find. I went advanced startup settings and did a system restore and choose the settings of only a few days.
  The system recovery succeeded. I restarted my PC, I was so happy that I fixed it, for so I thought it was. I open Google chrome, but as soon as I pressed the Enter key everything froze. Same office does not. I restarted my pc again. The start-up took a little longer. After going on the office a few minutes later the pc simply froze again. I can't do anything. I've been waiting so he could meet again for 10 minutes and still frozen. I restarted my pc and was able to put it in SafeMode before it froze again. And everything works fine in safe mode. I can still surf the internet but can't actually play cs: go in what is sad. I can still play undertale but which is nice. When I put back it in normal mode, it keeps freezing after a few minutes.

  If someone out there who can help me understand what causes this and how to solve my problem I would appreciate it a lot! :)

  Too long and did not read?: my PC turns off suddenly, when I boot it its stuck at welcome screen upward.

  Did a system restore and solved the problem but now it keeps freezing and not responding do not.

  Set it in safe mode and everything is fine but only limited.

  Read for more details.

  Hello

  Games can be hardware intensive (graphics, etc.) and your problem seems to come from a special combination of games and an accumulation of dust in your laptop causing it to cut.

  It may be an overheating problem and it is normally the main reason for your problem.

  .

  If it's a hardware problem, it would not not to restart.

  That said, it is possible to have a hairline cracks in the motherboard, etc, which becomes obvious as soon as it warms up

  Check vents for hair, dust, etc. and do not use a laptop when it is based on material surfaces: bedspreads, blankets, etc.

  If the problem persists, because it of a laptop, bring it to a local computer and reliable repair shop and get them to open and clean the dust inside...

  Here is an interesting discussion about the reasons for your problem:

  http://PC-trickandsolution.blogspot.com.au/2011/07/fix-laptop-overheating-shutdown-problem.html

  NB: > however 9 out of 10 cases of overheating are caused by obstruction of the air flow.

  _______________________________________________________

  Safe operating temperatures of criticism:

  "What should be the temperature of my processor in the computer?

  http://www.computerhope.com/issues/ch000687.htm

  @@@@@@@@@@@@@@@@@@@@@@@

  It is difficult to know what is the cause of the gel.

  It may be a number of things.

  But to rule out a software problem as follows.

  Search for malicious software with the FREE version of this program.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-8

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "How to optimize the performance of Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/37511-optimize-performance-Windows-8-a.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Worth the read as:

  "How to optimize Windows 8.1 for a desktop PC.

  http://www.howtogeek.com/167013/how-to-optimize-Windows-8.1-for-a-desktop-PC/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  " " Performance & maintenance"

  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And I would check to see if it has damaged system files.

  Each method/step below progresses to another if the first does not all corrupted files which are, etc..

  «Use the System File Checker tool to repair missing or corrupted system files»

  https://support.Microsoft.com/en-us/KB/929833

  _________________________________________________

  And these eightforums.com tutorials are very detailed for the problems resulting from Scan SFC:

  "How to run the command" SFC/scannow"at the start or in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  Read it in conjunction with the rest of the information they give link above.

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then try using ONE OPTION above to run the command sfc/scannow at the start

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the section THREE OPTION to manually replace the files SFC could not fix.

  __________________________________________________

  "How to update windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  Refresh your PC goes like this:

  • The PC starts in Windows RE (Recovery Eenvironment).
  • Windows RE scans the hard drive for your data, settings, and applications and puts them aside (on the same drive).
  • Windows RE installs a new copy of Windows.
  • Windows RE restores the data, settings, and applications, which it set aside in the newly installed copy of Windows.
  • The PC reboots into the newly installed copy of Windows.

  _________________________________________________

  "How to reset Windows 8 and Windows 8.1" . "

  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  "When you reboot your PC, the drive will be completely reset and all your applications and your files will be removed it." Windows 8 will be reinstalled, and you need to change any settings, and then reinstall all the apps you want to come back after the reset. If you know if all the files you don't want to lose, then you must back up these files before you start resetting.

  See you soon.

• Computer hangs or freezes a few minutes after the beginning

  Hi all

  I hope someone has the knowledge to help me.

  I have a Dell Vostro 1500, Vista Business x 32 installed.

  In the last days:

  * On a normal startup, the computer hangs after a few minutes.
  I get either 'failure-security options' pop up or the computer crashes only the operation of the pointer.
  The blue off the Task Manager CPU usage hard drive light will goes from 0 to 1% and stays there.

  I was able to copy information from a pop up that says I was saved from a fall BSOD:
  Signature of the problem:
  Problem event name: bluescreen
  OS version: 6.06002.2.2.0.256.6
  Locale ID: 1033

  More information about the problem:
  BCCODE: f4
  BCP1: 00000003
  BCP2: 8F639608
  BCP3: 8F639754
  BCP4: 82A5FC30
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 256_1

  * No problem starting and running programs and internet with ' SafeMode w / networking. "

  * The only thing I added was a Microsoft Update in the last days.
  I tried to do a system restore, but there is no system restore point.
  I used the restore of the system about 3 weeks there due to the other Microsoft Update was also causing startup problems.
  I didn't knowingly clear Points of system restore or turn off System Restore.

  * I ran Malwarebytes Anti-Malware and I got quarantined {PUP. Optional.Sanbreel.A, PUP. Optional.Sanbreel.A, PUP. Optional.Instacore.A, PUP. Optional.Hold.A}

  * I ran AVAST antivirus recently with no viruses listed, but not in the last days.

  * Chkdsk fixed drive C by removing some entries and fixed a couple of bad sectors.

  * sfc/scannow to block exactly 82% and I had to make a compromise difficult stop.

  If someone is knowledgeable on how to correct the situation described above, please answer!

  Perhaps it would be better for me to all my files on a memory stick or external hard drive simply copy and then reload Vista? Is there a disadvantage in doing this?

  This way you do not uncover what caused the problem and you might find that you still have a problem.

  so I can only perform simple tests troubleshooting with confidence.

  It's exactly what I mean do you. You follow the instructions, the information and I tell you what to do next. Ads simple as one of the meercats said in the TV. You get a bonus in this way you improve your knowledge of the works of your computer.

  We may be able to solve your problem yet more easily.

  Please download and run ADWCleaner and download a copy of the report produced for your OneDrive. Delete everything it finds. :
  http://www.bleepingcomputer.com/download/adwcleaner/

  I suggest you take the precaution to create a system restore point before running ADWCleaner, guard against unintended consequences. Select Start, Control Panel, system, System Protection, and then click the create button.

• Satellite P100 freezes a few minutes after the beginning

  Hi all!

  Im having a little problem with my satellite. When I start my computer its TI all ok, but after 5-6 minutes, always do the same thing. The screen freezes and it is impossible to do antyhing. My computer is only 2 years old. My guess is that the cpu is overheating, but I'm not sure. Maybe problems with the fans or just for more dust.

  -Does anyone know if it could be another hardware problem that makes the computer freezes? Also when I try to just start all over again it freezes in 1-2 mnutes.

  Hello

  It could be overheating but maybe memory dysfunctions?
  After 2 years of work from the laptop cooling modules might not turn with maximum performance and so the CPU cannot be cooled correctly
  so you could check if the fan cleaning grids will help a little to avoid freezing.

  Additional test memory. There are several tools to test memory like MemTest or Memtest 86. These tools are free!

• System freeze about 5 minutes after startup. Can move the mouse, but can't do anything else.

  Computer Compaq laptop turned on updates of Windows, firewall Windows, AVG anti-virus, etc.
  He has suddenly frozen 8 months ago - would not respond other than to be able to move the mouse.
  Does not "left/right mouse click" or "Ctrl + Alt + Del" or "power button."
  After a long waiting, pulled out the battery/power supply.

  Restarted in safe mode, was able to run AVG, but froze again.
  Has helped me select the AVG window and move it autour, but nothing else.
  Was not able to click with the right button on the taskbar to make appear the Task Manager.
  Only way to reboot was to remove the battery/power supply.

  Same thing, it is is happening whenever I start.
  System access for about 5 minutes and then freezes.

  I am able to get into the system at the start restore.
  Have a lot of personal photos on the laptop.
  Please provide a solution so that I can extract the photos and then restore the phone to factory settings.

  Thank you.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://www.Compaq.com/country/cpq_support.html

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite Pro P300 restarts a few minutes after the stop

  Hello

  I'm unable to download the update of the BIOS for a Toshiba Satellite Pro P300 PSPCDE (WIN 3.00), the reason being that I wonder a user name and password to download the file!

  The laptop has this annoying problem to revive a few minutes after the laptop has stopped, and that's why I want to update the BIOS to see if it suits him. Laptop is running XP Pro (downgraded from Vista).

  Ideas how I can get the update of the BIOS and will it solve the strange rebooting problem?

  Paul

  Where are you trying to download the BIOS?
  I always download my updates on the official website of Toshiba and if it doesn't work maybe you should wait a day.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  To be honest, I doubt that the BIOS update will solve this problem. I often read about this problem and you can solve if you disable the wake on LAN function in the BIOS and Windows (properties of the wireless network card).
  Check it!

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• Laptop will not load web pages for a few minutes after sleep

  HP M6-1045dx, Windows HP 64, SP1

  After waking from sleep, my computer does not load web pages for a few minutes after waking up from his sleep.

  I've tried to follow several times:

  Disabled/enabled wireless adapter

  Wireless adapter uninstalled/reinstalled software both links to HP and Intel.

  Did a clean install of the operating system.

  I sit within eight feet from my wireless router.  Another laptop connects instantly to sleep with no isses.

  Thank you.

  Download and install the latest Intel Wireless driver

  Intel Wireless Driver version 15.2.0.19

  I checked your BIOS driver. It is already updated to F.25. I would like to know what are the results with the new wireless driver.

• LaserJet Pro M201nw: M201nw LaserJet Pro no longer meets the ePrint requests, a few minutes after connecting to the network

  I've just implemented a new M201nw of the LaserJet Pro and it works fine, except for a problem with the printer with ePrint.

  I could implement Web Services on the printer and add it to as an ePrint, connected HP printer. Thanks to ePrint and Google Cloud Print printing for a few minutes after you have turned on the printer.

  But after a while, that can last from 3 to 10 minutes, the printer appears as "offline" in connected HP. If I check the settings ePrint to the printer through the front LCD or the web interface, for "ePrint Server Status", one of two things happening: sometimes there's just busy, or after a few seconds, I see "connection error. Check the Internet connection. »

  When I see the error message, I ask 'Tour ePrint temporarily turned off.' The printer will reconnect ePrint and work for a few minutes again.

  Local networking features of the printer such as network printing and web interface do not seem to have any problems.

  I don't think that the problem is related to my internet connection, which is reliable. I can monitor the traffic on my network and see communication between servers, XMPP from HP ePrint and the printer when the printer is working normally. When the printer has this problem, I still see the traffic coming in from HP but no traffic coming out of the printer. It's very strange and suggests part of the firmware of the printer does not work properly.

  Anyone else had problems with this printer model?

  Finally, I have determined the cause of the problem. While doing a follow-up, I discovered a router not authorized on the network itself advertising via the Protocol RIP (Routing Information) emissions. It seems that his presence finally confused the printer to know where to send the traffic. After turning off the emissions from the router, the ePrint feature, now works well.

• BSOD a few minutes after starting. And another after entering IE.

  Wake up BSOD a few minutes after starting.  Then I start and it's OK.  Then when I go into IE I get a new one.  Then, everything is OK for a long time (often for the rest of the day).  Trouble started when I downloaded Firefox, while IE was found to have a big security problem.  Download problems.  Tried to go back to the previous state good.  Still getting BSOD.  Then I backed up all personal files, reinstalled windows 3 times!  Still no luck.  Updates seem to work.  I have no material on it, more just printer, keyboard, mouse and speakers.  Something about a Bad pool caller and something on a manually initiated crash appear to be the most common BSOD.  Anyway, I don't understand all this.  I tried to talk with Microsoft technical support, but they could not help and indicate that it could be the hard drive itself.

  Someone at - it look at my https://onedrive.live.com/?cid=7C2BA0B8D210B559&id=7C2BA0B8D210B559%21105 minidump file

  And I would like to know if this is something that I can fix it or do I have to take the whole thing in a shop for repair.

  Thank you!!!

  Linda

  Hi Linda,.

  BAD_POOL_CALLER (c2)

  This indicates that the current thread is doing a bad pool request.

  4: kd > k
  Call child-SP RetAddr site
  fffff880 '03bf5928 fffff800' 031f2be9 nt! KeBugCheckEx
  fffff880'03bf5930 fffff880'01015431 nt! ExDeferredFreePool + 0 x 1201
  fffff880 '03bf59e0 00000000' 00028000 excsd + 0xa431
  fffff880 '03bf59e8 00000000' 642 d 0 x 28000 0000
  fffff880'03bf59f0 fffffa80 1006475 c 0x642d0000
  fffff880 '03bf59f8 00000000' 00000000 0xfffffa80 1006475 c

  excsd.sys (Diskeeper - ExpressCache) is tempted to rescue the pool which was previously already released.

  Uninstall ExpressCache as soon as possible.

  Kind regards

  Patrick

• Tecra 8200 freezes every few minutes with the XP Pro Retail version

  I've updated a Tecra 8200 with a retail version of Windows XP Pro SP2 (256 MB RAM) it was a new installation after reformatting the drive. I think I've loaded all Microsoft Windows updates and drivers from the site Web of Toshiba.
  The laptop freezes for about 30 seconds every few minutes, even when you try to open a session.
  Also when starting for the first time there is a constant repetitive ping of the noise, which I assume is the hanging windows startup sound. Finally, it stops and it can be used for a few minutes.

  Can someone please?

  Hello

  In my opinion, you should buy more RAM. As far as I know, this unit can manage with 512 MB max. You can use PC100 256 MB (PA3069U - 1 M 25). I'm sure the spirit more RAM there are much more likely to make it work.

  I hope that all hardware components are recognized and installed correctly. You can also try to check which processes are active and I advise you to stop. On this way, the processor has more power for other applications.

• Satellite C650 USB - Ports off a few minutes after the start of every day

  When I start my C650 Satellite for the first time every day the USB ports work perfectly, then after a few minutes, that you hear the-, they stop working and features of disappear of display devices & Printers.

  Reboot during the day makes no difference but the next day to the first commissioning of the USB ports working again. I think that every day they work a little longer, but I have not yet proved.

  Anyone got any ideas?

  You already posted in this thread.
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=73552

  Therefore, it would be interesting to know how USB ports work after that USB controllers was removed and installed again. The comments appreciated.

  In addition, you can disable the option that allows to disable USB ports in order to save power. This can be done in-USB Controllers-> properties > Device Manager - > last tab (power management)

• New computer falls a few minutes after connecting to the Internet.

  When I firstl newspaper in my internet computer will work fine, but after a few minutes, I get the dns server does not. How can I fix? My computer is new, I have troubleshooted my internet connection and all right?

  original title: WHY do I GET the SERVER DNS DOES NOT WHEN browsing WEB sites? HOW CAN I FIX?

  Hello Jackie,.

  ·         What is the operating system installed on the computer?

  Check to see if the following is useful.

  Method 1: Rinse and save DNS.

  a. Click Start. Click Run, type cmd. Press ENTER.

  b. at the command prompt, type the following command and press ENTER. It will display the message properly emptied the cache of DNS resolution.
  ipconfig/flushdns (there is a space between ipconfig and /)

  c. at the command prompt, type the following command and press ENTER:
  ipconfig/registerdns (there is a space between ipconfig and /)

  Method 2: Release and renew the IP address by following these steps.

  a. Click Start. Click Run, type cmd. Press ENTER.

  b. at the command prompt, type the following command and press ENTER

  ipconfig/release

  ipconfig / renew

  Now check the issue.

• Having to reset wireless network card all a few minutes after the release of Windows 7

  I have an Acer Aspire and have successfully used to connect to the Internet for a few months.  After the automatic updates of Windows 7 on 14/07/2011, I have to reset the wireless network adapter every few minutes.  My computer is essentially useless for the internet connection.

  There is no problem with the wireless router as I can connect to the Internet successfully for long periods of time with my HP computer.  I've used both computers simultaneously over the network without any problems.

  When Internet Explorer "blockages" and I opened the network and sharing Center, it says that my computer is connected to my home network but there is "No Internet access."

  In the system tray, if I right click on the wireless network icon and select problems, he comes back with:

  • Reset your wireless network adapter
  • The connection between your modem cable, router or point of access and the Internet
  • Problem with access point or wireless adapter

  So far, I have

  • uninstall the Windows updates and rebooted my computer
  • Adapter wireless uninstalled & reinstalled my
  • made sure the drivers for the wireless network are up-to-date.
  • made sure the Internet Protocol Version 4 and 6 are configured to obtain the IP address and the address of DNS server automatically
  • back to zero/renew the IP address manually
  • with Windows Firewall disabled (unable to connect then I have reactivated firewall island

  Apart from restoring a backup, I'm ideas.  Help!

  I ended up having to do a hard reset on my router.  It seems to have cleared up the problem.