Attachment displayed in problem report

Similar Questions

• Displays error message the problem report for this solution has been deleted or modified on the computer and is no longer available installation multifunction printer

  Original title: solve PC issues icon

  install your all-in-one printer driver, then click on it, then it will take you to a screen that indicates the problem report for this solution has been deleted or changed on this computer and is no longer available. But since it is presented as a problem, it's not going to disappear.

  Hello
  1. What is the brand and model of your computer and the printer?
  2 did you change on your computer before this problem?
  3. the printer is working correctly?

  4. are you clicking on a program from the printer or printer driver file?

  Look for error messages in the device to the printer driver manager.

  a. Click Start.

  (b) in the search box, type Device Manager.

  Follow the suggestions and see if it works very well.
  Method 1
  Check if the problem persists in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Method 2
  You can uninstall and reinstall the printer and see if it works very well.
  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  See also:
  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• A way to find my previous questions and problem reports?

  Is it possible on this forum to find my previous questions and problem reports? Since viewing a question earlier today, I found the greater PART of the answer and would like to add that I found the question, without waiting for someone else to answer. I can't remember the title I gave to the previous question, or I would use this title in the search for it.

  Information troubleshooting below is most relevant to a previous problem that this question.

  Contributions my link on main page of the forum should display a list of all your job offers.

  See the search in this forum for your username under "posed by".

• Solutions and problem reports

  I can't update

  Update what? Problem reports and Solutions provides a centralized location for managing the resources of the maintenance of your computer like Windows Update, Antivirus and error report.

  If you have problems with Windows Update, try the following:

  How to reset the Windows Update components ? Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• "Problem reports and Solutions" does not

  After scoring in my Windows Vista machine, I am bombarded with notifications "Problem reports and solution" does not. I tried to disable the service, but I still get notifications. I can't find PRS in the control panel. In the event viewer, I found the following:

  Error
  Log name: Application
  Source: Application error
  Event ID: 1000

  WerCon.exe application, version 6.0.6002.18005, time stamp 0x49e026db, module wercplsupport.dll, version 6.0.6000.16386, time stamp 0x4549d345, exception code 0xc000001d, offset error 0x000000000000ce84, 0xda0, failing application start 0x01cd140e4c7b7770 process id failed.

  I can't confirm or deny that usrename of the local administrator account has been changed. It is quite possible. I know that usernames on the pc have been changed to instead of creating new user accounts. I just can't confirm if one of these accounts was a local administrator.

  Any help would be greatly appreciated. It is a major pain in the back.

  SG

  Hello

  1. Your computer is connected to a domain?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you to see link below and check if it helps.

  Windows Error Reporting and reports on problems and Solutions feature in Windows Vista: http://technet.microsoft.com/en-us/library/cc709644(v=ws.10).aspx

  Hope this information is useful.

• Do I really need to download Windows Vista SP1, if I already have SP2? Problem reports and Solutions says to download.

  I ran, "Find new solutions", in the problem reports and Solutions and a new solution was found for Blue error screen and he recommended that I have download Windows Vista SP1. I have SP2, so I need to download the old version too?

  Hi JJ,

  I took the lead and it moved to the Performance and maintenance Forum. In response to the original question don't you're useless to download SP1 again since you have installed SP2. However, it would be preferable to follow with PA support to troubleshoot the Stop Code you receive.

• Problem reports and solutions providing incorrect information because of Adobe.

  There seems to be a problem with Adobe Reader X generating a crash and an error when it is stopped. Windows "problem reports and solutions" said Adobe updates are available, but they are not and the version of the player is the last. This question is also on the Adobe forums.

  In reality, Adobe Reader seems to work OK so why it generates this error I do not know.

  This is the Windows error reporting,

  Signature of the problem
  Problem event name: APPCRASH
  Application name: AcroRd32.exe
  Application version: 10.1.1.33
  Application timestamp: 4e64e4e2
  Fault Module name: AcroRd32.dll
  Fault Module Version: 10.1.1.33
  Timestamp of Module error: 4e64f98b
  Exception code: c0000005
  Exception offset: 000218f8
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057
  Additional information 1: fd00
  More information 2: ea6f5fe8924aaa756324d57f87834160
  Additional information 3: fd00
  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  See,
  http://forums.Adobe.com/message/4028803#4028803

  I run Vista and MSE only and tried Adobe Reader X on a clean install with the same error.

  Hello

  You can see this article which talks about known issues with drive X.
  http://kb2.Adobe.com/CPS/877/cpsid_87775.html

  See also:

  http://kb2.Adobe.com/CPS/860/cpsid_86063.html

  If the problem persists, contact support Adobe as mentioned above.

• How do I remove an element in Windows Vista "Problem Reports and Solutions"?

  I have this problem here in my pc which is said in the "Problem Reports and Solutions" window, "Antimalware Service Executable" which seems to be irremovable. Even if I click on 'Clear the problem and the solution of history' it does not disappear, it just says: "cannot delete the 1 article.

  Help, please

  I checked again and what da you know... it's GONE already as he was not there. u

  Thanks for the 1 Viewer. ALT + 0252 = u

  Try the steps mentioned in the article

  http://www.calendarofupdates.com/updates/index.php?showtopic=13967

• Try to activate Vista's problem reports, but get the message "Windows incident reports are disabled." and some settings are managed by your system administrator

  Original title: trying to activate the Vist problem reports, but get message "Windows problem reports are disabled."

  "Windows problem report is disabled." I can't activate the problem reports and Solutions on my Windows Vista computer.  When I click on "Change settings", I would be prompted with the following message if poster "some settings are managed by your system administrator."  It's personal PC at home.  I don't know how to activate it.  I already went to political group & register to adjust some settings.  But still unable to activate this.

  All settings are disabled as this.

  This problem only recently.

  Method 1

  System Restore does not work.

  Method 2

  Disable the antivirus software does not work.

  But after some research, I realized that the problem could be due to a recent installation of a PC anti-frustration software called Soluto (the star was "Activate Crash Handler Soluto").  It worked after that.  After uninstalling, I rebooted the PC system.  After the reboot, I checked the reports on the problems and Solutions and found I could now adjust advanced settings.  I have also reinstalled the software, Soluto and ensured that this time, "activate Crash Handler Soluto" not was not checked (i.e. enabled).

• problem reports and solution:

  my window vista show me problem reports and solution, but it doesn't give me any solution. Tell me how can I solve this issue?

  How to fix Windows Update, Microsoft Update and Windows Server Update Services installation issues:
  http://support.Microsoft.com/kb/906602

  1. see the "need help?" Tell us what problem you are having"section of http://support.microsoft.com/ph/6527

  2. you cannot install some programs or updates
      http://support.Microsoft.com/kb/822798

  3. check your WindowsUpdate.log (% windir%\WindowsUpdate.log) to find errors associated with the download/install.

  How to read the WindowsUpdate.log file
  http://support.Microsoft.com/kb/902093

  3 b. errors compared to those listed here: http://www.bleepingcomputer.com/blogs/mowgreen/index.php?showentry=1122 or go to http://windowsupdate.microsoft.com > click on help and Support link in the left pane > solve problems on your own.

  ================

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  ================

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Problem Report requested I uninstall and reinstall Adobe Flash Player

  Adobe Flash Player problem report not working does not properly uninstall is fine, but entered in reinstall it and won't let me no and says I need Flash player to do. Bit confused I've only followed links windows according to the problem report.

  Help!

  How to do:

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Uninstall Flash by using the uninstall program Flash Adobe link above.

  Flash is sometimes corrupted.

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  Reinstall Flash, after 1st unchecking / uncheck the toolbar Google download option there.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  They will help you with your question IE in Forum Internet Explorer above.

  See you soon.

  Mick Murphy - Microsoft partner

• The limit to the number of columns to display in the report. Help!

  Hi all
  
  Maybe this is a stupid question. But why get this error with a report of the IR? and what is the solution for this. Please help me with this.
  
  Error
  
  The limit to the number of columns to display in the report. Please, click on select columns under Actions menu to minimize the list of columns in report view.
  
  Oh... And I also have a blob column... If the format is not given, the table is very good... but happen to get this error only when the BLOB download format is given.
  
  Thanks and greetings
  John
  
  Published by: JB on March 30, 2012 11:08

  Hello

  I implemented a small suitcase of test on apex.oracle.com and I get the error even if I use the download format.

  I have a table
  test_blob (identification number, name varchar2 (10), blobcont blob)

  If I create IR as

    select
      id,
      name,
      blobcont
    from test_blob
  

  and then I set the download format I got the error.

  If you want this to work you need to change your query to

    select
      id,
      name,
      dbms_lob.getlength(blobcont) blobcont
    from test_blob
  

  And there still define download for blob on column blobcont format.

  Kind regards
  Aljaz

• Oracle 11g problem reports is displayed

  Hello I'm having some trouble using the:
  
  Run_report_object
  
  the main problem is that there is no provision when there essay on my request, the server work and no error, even the internet explore seems to begin to try to open the report in a new window I guess but then it stops and nothing happens without error any info nothing.
  
  This is the code I use on key elements of printing
  
  DECLARE
  rep_id REPORT_OBJECT;
  rep_result VARCHAR2 (80);
  BEGIN
  (rep_id-: = find_report_object('C:\Oracle\Middleware\Oracle_FRHome1\forms\L00000001.rdf');
  rep_id: = find_report_object ('jt001');
  
  
  -SET_REPORT_OBJECT_PROPERTY(rep_id, REPORT_OTHER);
  
  rep_result: = RUN_REPORT_OBJECT (rep_id);
  
  END;
  
  I hope someone can give me a hand
  
  Thanks in advance

  Thanks for the appreciation,

  For setting window, you must add this url value: -.
  paramform = yes

  for example
  Web.show_document ('http://appserver:8889/reports/rwservlet?report=E:\reportname.rdf&destype=cache&desformat=pdf*¶mform=yes*&userid=scott/tiger@hoststring', '_blank');

  Hope this can solve your problem.

  Oracle-911

• in the header problem report the actual display Max and Min...

  Hi guys,.
  
  I have the following problem.
  
  1. I have a multi selection prompt where you take 2 years.
  
  2. I have the following columns. Year, month, Exp, calc YEAR (max), calc (min)
  
  3. I need to get the months max and min across all lines. So far, I tried MAX, MIN, RMAX and RMIN without success. However, it is not picking up along all lines. For example,.
  
  2001 1 100050 2001 2001
  .....
  2002 1 244005 2002 2002
  
  I'm sure it has to do something with my aggregation in the computed column, but not quite sure where exactly.

  c max (max (year)) and min (min (year))

  :)

• Display refresh problem: Pixellations

  Pixelation occurs only in Firefox. I tried to plug in computer screens and other screens, LOC and the problem is that the same no matter what screen is hung. It only happens with Firefox and not other browsers or other programs on my computer, including the desktop. Because I can't post a screenshot, I will try to describe what I see. The header sidebars and Firefox display a master random gray squares that hide the text as the text menu, but not white address bars. If I move my mouse over the gray block, it refreshes and correctly display the menu icons and text. The passage of the mouse refreshes the text and icons, but not the background of the menu headers or the sidebar. They remain cut upwards with random blocks of color opaque dark squares, rectangles and the combinations of these sizes.

  Hello

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.