Attack of the kernel after upgrading to El Capitan

Similar Questions

• Import old box Inbox and sent in the Mail after upgrading to El Capitan

  There has been much discussion about the e-mails lost after upgrade to El Capitan, but I have not seen this particular question.

  I discovered that, like many others, all emails in my Inbox and in my sent folder to leave before the upgrade had disappeared. The issue has not affected the emails I had moved to folders.

  Open the mail library file (in the Finder, hold down the Option key selecting go to the top menu and the library appears), I discovered that Mail was created a new file V2, account, while the old one, V3 (created in 2013), sitting next to her. Go by the size files, it seems fair to assume that the V3 still contains my "lost" emails

  So, I don't know if the bug is that a new V2 should have been created at all, or is it a sync error, or something else. What I know is that when I try to import the items from Inbox and sent from the V3, I get an error message telling me that no mbox valid was found. This is patently false.

  I also tried to copy on an external hard drive, gave them a different name, but even then I couldn't import them. Reconstruction did not help either.

  Anyone able to help? I have a few crucial e-mails out there, and I try to avoid the upgrade...

  

  Address postal (El Capitan): import or export the mailboxes

• I'll always be able to run the opening after upgrade to El Capitan?

  I want to install Office 2016 on my MacBook Pro which is running 10.9.5 - it asks me to upgrade to El Capitan. I'm afraid that Aperture will not work more.

  On El Capitan, you need opening 3.6.  You are currently running opening 3.5.1 or an older version?

  Before you upgrade to el Capitan make a full time Machine backup of you system so that you can return to the Mavericks, if need to be.  (see: OS X El Capitan: revert to a previous version of OS X)

  And check if you are able to update to 3.6 opening.  Check before upgrade you to El Capitan.

  • Open the App Store and sing in your account in the Store with your AppleID menu.
  • The fourth "shopping" tab  Figure opening it to your purchase history?  If so, you can update opening 3.6, once you have upgraded to El Capitan.  If the opening is absent from your purchase history, you will only be able to update with the help of the PapSTore supported.

  See this user Tip: update to Aperture 3.6 after the release of Photos

  https://discussions.Apple.com/docs/doc-8402

  3.6 the opening is the latest version of Aperture and the only one to run on El Capitan.

  There are more and more questions with an opening. Opening 3.6 is running on El Capitan, but keep accumulating the minor bugs.

  • When brushing the adjustments, the position may be a bit off, a pixel or so.
  • The thumbnails in the list view are backwards.  Re: opening and El Capitan OSX
  • If you add a curves adjustment, adjustment to straighten will be not visible in the exported images. See: right
  • The link to the plug-ins page work is no longer in the opening menu, but it's the same for all versions.

  And you can order are no longer produced printouts of Aperture. Apple has stopped completely, the support for Aperture print products in any version of Aperture.

• LasetJet Pro M475dn: Impossible to scan over the network after upgrade to El Capitan

  After that I upgraded to El Capitan I no longer use HP Scan or HP Easy Scan to scan the network more. I can print to the printer, but analysis always results in the page being pulled by the document feeder, but applications just to lock-up without the document showing. Everything worked fine on Yosemite.

  I found a workaround solution that once worked before after a update of Mac OS X (but had to change the name of file, much like the original file has disappeared). Just download the next file on HP (no matter that it is not for your printer; it's not mine either (OfficeJet Pro L7680) but it works).
  
  FTP://FTP.HP.com/pub//softlib/software12/COL51752/OJ-125213-3/HP-inkjet-SW-OSX-Mavericks_v12.34.37.dmg
  
  Disable SIP for this installation and when you run the installation program (do not know if you need to do, but I did anyway). To do this, the instructions are here:
  
  https://forums.developer.Apple.com/thread/3981
  
  When you run the Setup program, make sure you hold the CTRL key when you right-click on it, then click Open in the menu.
  
  Run the Setup program. Be sure to select the HP scanning software and install it. When you get to the configuration of the printer, just skip this step (unless you are using the printer in question). The parser components are what you really want from the printer drivers are already in El Capitan, if you have a HP supported printer. The scanning software will have already installed to the moment you arrive at this screen.
  
  Install the HP Easy Scan on the App Store app (if you get the latest version of the software your front-end). You should be able to run the scanner and scans without restart. I don't know if it will work for everyone, but certainly, it worked for me and keep me until they find what went wrong in El Capitan to disable scanning and scanning capabilities.
  
  SIP turn on again so that your Mac is better protected. We should all work after that. After doing the above, I found that I was able to not only use the HP software, I was able to use Image Capture, preview, etc, to get images from the scanner. Your mileage may vary, but if all goes well it will work again for you all.

• What happened to the flashlight after upgrade to ios10

  What happened to the flashlight after upgrading to IOS 10

  Flashlight is the control center? I swear that I saw on one of these demo phones in an Apple store.

• Problem with the mapping of the keyboard after upgrading to Fusion 7

  Hello

  I noticed that the keyboard layout has changed in the comments after the upgrade to VMware Fusion version 6 to version 7, even if nothing has changed in the settings "Region and language" in comments Windows 7.  Keys that have changed are "------' with ' < ' and ' | ' with ' > ' everything is OK. The keyboard is configured in Italian

  All the world has noticed the same problem?

  Have you solved?

  Thanks in advance.

  The problem has been resolved by the technical support of vmware with a workaround. They know that the question on the keys is interchangeable in the VM after upgrade to Fusion 7.

  Their development team is currently working on this issue on the priority. This will be fixed in the next update.

  However, they have a work around for the problem of keyboard. Following the instructions below to map the key manually in VMware Fusion.

  : Note make a note of the interchangeable keys in Windows before you enable the mapping of the keys.

  1. click on VMware Fusion-> preferences-> keyboard & mouse-> mappings of keys

  2. make sure that 'Enable key mappings' is enabled

  3. click on '+' sign at the bottom

  4. press the key that you want to send from the text box Mac keyboard

  5. press the key you want to receive on the VM in text box

  Note: You can also use the combination of change, control, Option, command if necessary.

• How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

  How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

  Hello

  You can download the Photoshop CS 6 from the below mentioned link.

  Download Creative Suite 6 applications

  Thank you

• Mac Book (end 2008) not dΘmarre after upgrading to El Capitan 2016 (1511.3.1)

  Mac Book (end 2008) not dΘmarre after upgrading to El Capitan 2016 (1511.3.1) in order to prepare for Sierra

  I tried safe mode > disk utility, which took a lot of time and the disc seems to be OK.

  Extensions have nucleuses, almost all these .kext, but I'm not able to get rid of them.

  -What do you mean by? "Extensions have nucleuses, almost all these .kext, but I'm not able to get rid of them."?

  Did you delete anything?

  -The Mac can't you start mode (boot with the SHIFT key) safe?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• MacBook Pro(MID-2012):Issues after Upgrading to El Capitan

  I use Macbook Pro mid-2012 version. After upgrading to El Capitan, I am facing a lot of questions.

  (1) the DMG files does not open. said hdiutil attach has busy resource failed.

  (2) my Macbook Pro will not stop completely.

  (3) my systems updates install completely. They hit each other between installation (had to force quit)

  ' (4) ' about this Mac ' gets hit when trying to access storage tab.

  Any suggestions?

  Your MBP was working perfectly before the update?

• Office jet Pro L7780: Office Jet Pro L7780 stopped scanning after upgrading to El Capitan

  After the upgrade to El Capitan I can't us the scan function.  I deleted and reinstalled the driver.  Scanner does not appear.  I tried to install HP "Easy Scan" and it says that the scanner is not available. What to do?

  Thank you

  Ron

  Hi @danorske,

  Welcome to the Forums of HP Support! I see that you have problems of analysis, after upgrade to El Capitan. I will do my best to help you with this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Please try the steps listed in this document, Printers HP - Scanner USB connection is lost (Mac).

  If the network printer, please use this document, Printers HP - Scanner card WLAN is lost (Mac).

  Probably the step to reset the printing on Mac system, will help you in this situation.

  How is the printer connected?

  Please let me know the results and if there is anything else I can help you. Thank you.

• I can't import my LR6 RAW files after upgrade to El Capitan...

  I can't import my LR6 RAW files after upgrade to El Capitan...

  External drive is formatted in NTFS in Windows format, and you HAD a utility installed in your earlier version of Mac OS X to what OS X write on a NTFS formatted drive. Mac OS X cannot do it by itself. As you upgrade to OS X 10.11 is removed and or disable this utility causing OS X see this drive read-only (OS X can read NTFS disks formatted in native mode, but cannot write to them natively). You will need to reinstall this utility and or get a updated version of this that works with El Capitan.

• Not able to scan with the preview after upgrade from Mac OS Sierra...

  After upgrading to Mac OS Sierra. I'm unable to use the preview to scan.  Before this upgrade, it worked fine.  The HP scanner software does NOT work something like OS 10.8 or 10.9.  Preview worked perfectly so far.  If anyone knows how to solve this problem, your contribution will be greatly appreciated.  Thanks in advance.

  Have you tried scanning with Capture of Image instead? It worked for me.

• Notes, do not sync on the iPhone after upgrade

  After upgrading to IOS10.0.2 on iPhone no matter who has experienced problems with Notes is no longer sync with other devices?

  Hi jimbjazz57,

  I understand that, after the update your iPhone to iOS 10, you had some problems with your notes, do not sync with other devices. I know it's important to have your information available on any device you use, so I'm happy to help you.

  If use you iCloud for synchronize your notes, and then connect to iCloud.com and see if your notes are sync to iCloud at all.

  We want to, on your iPhone, make sure you create notes in the right folder. Open the Notes app, and then tap left arrow in the upper left corner of the app. Make sure that you have the appropriate folder selected here when entering new tickets.

  If your notes are not yet the timing, we will try to switch your Notes and turn it back on. To make this opening settings > iCloud. Disable notes, restart your iPhone, and then turn on again them.

  Thank you for using communities Support from Apple. See you soon!

• can not detect the iphone after upgrading 12.5.1.21

  Set to update to the latest version of itunes (12.5.1.21) and now itunes does not detect my iphone.  tried to remove the lockdown folder. tried to restart all devices.

  Windows 10 with all updates installed. Someone at - it suggestions?

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the alternate build Download iTunes for Windows (64-bit-for older video cards) , which is sometimes a useful workaround.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you're back 12.5.1.21 to 12.4.3.1 or 12.4.2.4, for example, then you will also need to restore the database of the library using the method described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• Problems using the brightness after upgrading to 10.11.4

  I ran into an issue today after the upgrade to El Capitan 10.11.4. It seems that the upgrade while she fixed some issues caused my buttons with the brightness of the screen (F1/F2) no longer be functional. All other keys on the keyboard are functioning normally.

  Is this a bug in the software, or is there something I can do to fix this?

  

  You can provide any help would be greatly appreciated.

  Thanks R

  Check-> keyboard-> keyboard system preferences and make sure that the "Use all F1, F2, etc. as standard function keys keys" option is NOT selected.