attack targets different rt by changing IP in the host program

Similar Questions

• Is it possible to choose between different targets (different configurations NI 6587) FPGA through the host VI

  Hello

  I use card FPGA 7966R with Module of e/s 6587. I have two sets of screws FPGA, one that uses 6587 mode series (Serdi channel) and the other in parallel mode (Serdi connector). I'm trying to select one of the FPGA VIs via the host VI and I don't know if it's possible.

  Some things to note:

  • All IOs have the same names, FIFO has the same data type and name.
  • Because they use the IO 6587 controller in a different configuration, I can't parallelize them and combine them into a single VI.

  Thank you

  MILIN

  You should take a look at the function of Bitfile dynamic reference opened .

• How to change or update the host file?

  When I installed WIn7, I created a user account that is an administrator based on user account information.

  Now, I want to change the host file but it always respond that I have to use the administrator account to save the host file.  I tried to change the security in the prosperity of the host, but it does not allow me to do.

  Appreciate someone can walk me through step by step.

  Thank you very much

  Open Notepad as administrator (right click on the Notepad shortcut and choose "Run as Administrator") then open and edit the HOST file using this instance of Notepad.  (Via the menu "open file of-->".)

  Geographical area:

  C:\windows\system32\drivers\etc\

  or

  %SystemRoot%\system32\drivers\etc\

• Change password in the hosted Application (RDSH)

  Hello colleagues!

  VMware Horizon Client 3.4.0 build-2769709

  VMware View 6.1.1 construction-2769403

  VMware vSphere 6.0.0 2776511

  For users of an application published. How thay can change the password for authentication in Windows AD, when they see that the advertised program window, and the combination ctrl + alt + del or ctrl + alt + end (physical keys) does not work?

  TNX for help!

  They have to use Ctrl + Alt + Ins to send a Ctrl + Alt + Delete to the RDSH session.  Then they can change their password.

  Also, if a password expires, by connecting to the sight connection to the server with the Client of the view, they will be asked to change their password.

• Target ball and ball over Active on the host with a lot of free memory

  Just at the moment where I think I understand the management of the ESX memory, something confuses me once again.  My understanding of the balloon pilot, is that when an ESX host has need of more memory to be allocated to other virtual machines as the VMKernel steals memory back from the virtual computer running.  However, I have a virtual machine which seems to indicate that the target of ball is well above what is memory 'Active', and the host ESX virtual machine running on a 6 GB of unused memory.  I think that this might have led this virtual machine to go into a State of forgetfulness once already, because I found it does not, only to discover that she used only 30% of CPU and 2 GB Active out of 6 GB of memory allocated, but making a ton of swap memory.  What gives?

  Why in the world of the balloon pilot would target memory on a VM running busy, when there is a lot of free memory available on the host, and why would be a beginning of comments Exchange when it uses only a fraction of the memory allocated to it and the host is sitting on the free memory pletty?  None of my other virtual machines have memory usage charts that look like this.

  This can happen even in the absence of resource pools. Check your settings of VM, "resources" tab and make sure that the unlimited checkbox that she checked on the memory and CPU...

• Target is disconnected, but my goal is the host, I'm

  I just started using NI Veristand today, and I was trying to interface a Simulink model compiled into a LABview signal producing VI. I did the two files compatible with NI Veristand.

  I followed the tutorials online and got to the point where I can run my project. However, whenever I have started my project running. It does not reason because NI Veristand cannot the handshake with the target. I looked at my goal and saw it was disconnected, but my goal is my host.

  Does anyone know why this might be and how to fix it?

  I use LABview with NI Veristand 2015 2015.

  Thank you

  
  

• BSOD on Toshiba laptop after minor changes made to the startup program and the removal of security tool virus software.

  Blue screen of death after the windows startup screen.  Blue screen flashes briefly after the 1st installment on the windows start bar, then restarts.  won't start without failure or last configuration mode.  the recorded video and reading frame for the stop code:

  0x0000007E (0X805C370C, 0XBACCB2B4, 0 X 80000003, 0XBACCAFB0)

  Help, please!  I have an IMPORTANT presentation to give to the customer as well as important historical customer files.

  
  

  reiffsm,
  Here are a few things to try everything first.

  1 disconnect all external devices (printers, USB hubs, USB keys, etc.) and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Demarrer start in SafeMode with command prompt, and then run the following commands.

  Chkdsk /r

  http://support.Microsoft.com/kb/315265

  sfc/scannow

  http://support.Microsoft.com/kb/310747

  Also this article can help.
  http://support.Microsoft.com/kb/330182

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to change the domain name on the host target

  Hello!

  I need to spend a couple of machines in a new area.

  Is it possible to change the field to a GC host or what I need to remove and add?

  / R

  Unfortunately, there is no good way to change the host name.   You can change the display name with EMCLI change the target, but below would be inaccurate, because it would still be the old domain.   Can you create a DNS alias so that it can still be used with the old domain?   Otherwise, delete and rediscover is the only way that I can see.

  You can use this to remove and readd without reinstallation:

  http://docs.Oracle.com/CD/E24628_01/install.121/e24089/appdx_repoint_agent.htm#BABICJCE

  followed by

  emctl start agent

  emctl security officer

  emctl config agent addinternaltargets

• How are the changes/updates on the attributes target system are reconciled?

  Hello
  
  How are the changes/updates on the attributes target system reconciled within IOM automatically? Suppose if the userpassword in OID is changed via external SSO application by the user. How these changes at the end of the target system can be reconciled in IOM? Annex which task should be scheduled for the same? I understand that we can configure reconciliation the target system. But suppose that happens if a another example; a group of groups are removed from the OID; How these changes will be reconciled within the IOM? It is done in real time?
  
  Response to most early would be really useful.
  
  Thank you
  -oidm.

  The only changes that are made in time real are push systems. For example, Peoplesoft has an Integration Broker that when a change occurs, the events is pushed to the listener that then creates the recon event to IOM. Synchronization of Active Directory password is also a push system where the domain controller has a dll that is triggered when the password is changed to push to the IOM.

  Other targets are reonconciled to an interval defined in your task scheduler. Most of the targets have some form of variable change so that only the entries that are updated in the target are reconned in. Values such as passwords should not be reconciled however because they will be in clear text in the recon Manager and in the database.

  As for your example, it does not really have that IOM criteria. IOM does not manage the OID groups to a group level, it manages the permissions of the user level. So if you continue to run the recon OID group Lookup on an interval of schedueld, it would update the list of choices that is used to define the groups available on the child table. Then when the recon is run agaisnt these OID of the user that have been changed (assuming that a change to a membership in a group is an update to the user, which is not in Active Directory) and then you would get their current list of groups they have right to.

  -Kevin

• Computer target hung and RDP held while making the Office remotely in Windows XP Professional

  Hello

  I have problems with Remote Desktop for Windows XP Pro SP3. The scenario is as follows

  1. Target computer is Windows XP Pro SP3
  2. Client PC also has the same OS
  3. With the RDP Client, computer target hung. On the client, it is show as trying to connect and continues for a long time
  4. On the target pc, even keyboards and mice do not work
  5. Any application working on the target computer is also get hanged
  6. The only way to normalize the target computer is restart

  Under Remote Desktop, we have already given all the required permissions. Please note that

  • The firewall on the target computer is OFF
  • Symantec antivirus is installed
  • RAM is more than 2 GB
  Can someone advise me on this?
  Thank you.
  Kind regards
  Feraud

  Hi Feraud,

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that the remote desktop connection is blocked on the target computer.

  I will certainly help you with this issue.

  Here are some methods that you can try in order to solve the problem.

  Method 1: Temporarily disable the antivirus from Symantec and check.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Change the listening port for remote desktop and check.

  http://support.Microsoft.com/kb/306759

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  For more information, see the links.

  The problems of desktop remotely

  Note: Applies to Windows XP

  How to use the Windows XP Professional Remote Desktop feature

  If the problem persists or you have any other questions about the remote desktop connection, do not hesitate to let us know. We will be happy to help you.

• 3.0.1 network connect automatically when the host network changes

  I upgraded from 2.x and I am on 3.0.1.  This virtual machine is a new facility on 3.x, 2.x upgrade vm crashed.  The question that I have never took place under 2.x.  I run the VM in bridged mode network card.  Every day, I connect the Macbook to several networks.  Whenever I connect to a different network, I have to unplug the vm network adapter and reconnect it in order to connect.

  vm ipconfig

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :

  ... Description: Intel(r) PRO/1000 MT Network Connection

  Physical address.... : 00-0C-29-64-EC-80

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::fd0b:ca0f:663:9d08% 11 (Preferred)

  IPv4 address: 192.168.1.7 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Friday 15 January 2010 20:45:56

  End of the lease...: Saturday, 16 January 2010 08:45:51

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DHCPv6 IOOKING...: 234884137

  DHCPv6 DUID customer...: 00-01-00-01-12-9D-4F-D4-00-0C-29-64-EC-80

  DNS servers...: 192.168.1.1.

  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {2ACCCC25-7A78-4EA2-AA00-31E7A9FCD116}:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft ISATAP adapter

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::342c:2315:3f57:fef8% 13 (Preferred)

  ... Default gateway. :

  DHCPv6 IOOKING...: 301989888

  DHCPv6 DUID customer...: 00-01-00-01-12-9D-4F-D4-00-0C-29-64-EC-80

  NetBIOS over TCP/IP...: disabled

  ifconfig to host

  lo0: flags = 8049 & lt; UP, CLOSURE, RUNNING, MULTICAST & gt; MTU 16384

  inet6: 1 prefixlen 128

  inet6 fe80::1% lo0 prefixlen 64 scopeid 0x1

  INET 127.0.0.1 netmask 0xff000000

  inet6 fd03:56e6:eb6:82ed:226:8ff:fe0c:6fb0 prefixlen 128

  gif0: flags = 8010 & lt; POINTOPOINT, MULTICAST & gt; MTU 1280

  stf0: flags = 0 & lt; & gt; MTU 1280

  en0: flags = 8863 & lt; Upward, SPREAD, SMART, RUNNING, SIMPLEX, MULTICAST & gt; MTU 1500

  ether 00:26:08:0 c: 6f:b0

  Media: AutoSelect status: inactive

  media support: no automatic selection 10baseT/UTP & lt; s half duplex & gt; 10BaseT/UTP & lt; full duplex & gt; 10BaseT/UTP & lt; full-duplex, control flow & gt; 10BaseT/UTP & lt; duplex full, hw-looping & gt; 100BaseTX & lt; s half duplex & gt; 100BaseTX & lt; full duplex & gt; 100BaseTX & lt; full-duplex, control flow & gt; 100BaseTX & lt; duplex full, hw-looping & gt; 1000BaseT & lt; full duplex & gt; 1000BaseT & lt; full-duplex, control flow & gt; 1000BaseT & lt; duplex full, hw-looping & gt;

  EN1: flags = 8863 & lt; Upward, SPREAD, SMART, RUNNING, SIMPLEX, MULTICAST & gt; MTU 1500

  inet6 fe80::226:8ff:fee3:42 has 9% en1 prefixlen 64 scopeid 0x5

  INET 192.168.1.8 netmask 0xffffff00 broadcast 192.168.1.255

  ether 00:26:08:e3:42:a9

  Media: selection automatic status: Active

  supported media: AutoSelect

  fw0: flags = 8863 & lt; Upward, SPREAD, SMART, RUNNING, SIMPLEX, MULTICAST & gt; MTU 4078

  LLADDR 00:26:08: ff: fe:0 c: 6f:b0

  Media: AutoSelect & lt; full duplex & gt; status: inactive

  supported media: AutoSelect & lt; full duplex & gt;

  VMnet1: flags = 8863 & lt; Upward, SPREAD, SMART, RUNNING, SIMPLEX, MULTICAST & gt; MTU 1500

  INET 172.16.13.1 netmask 0xffffff00 broadcast 172.16.13.255

  ether 00:50:56:c0:00:01

  VMnet8: flags = 8863 & lt; Upward, SPREAD, SMART, RUNNING, SIMPLEX, MULTICAST & gt; MTU 1500

  INET 192.168.162.1 netmask 0xffffff00 broadcast 192.168.162.255

  ether 00:50:56:c0:00:08

  Thank you

  Perry

  [email protected] wrote:

  I'm not sure where I'm supposed to find the ethernet0.linkStatePropagation.enable line, I looked for the vmx files, searched, but I'm not finding it.  I also search through different files in vmware to research records.

  It is in the .vmx config file found within the target Virtual Machine package.  Take a look at working with packages of the virtual in VMware Fusion help file or Machine related to the collection of information for VMware Fusion

  If this a change in 3.0 and I just have a disconnection/connection release/renew I can live with that, but it 2.x it is automatically connected to the new network.

  The parameter rcardona2k suggested is the default setting so if it is in place and is set to FALSE, then set it to TRUE but I suspect since TRUE is the default value if it is already set to the default value then that will not help you.

• When I try to change the default program for opening a specific file type in the "always use the selected program to open this type of file" highlights not.

  So, I can't change the default program. How can I get it to show?

  Hello Swansong,
  It is also possible for Panel Applications - define how Firefox handles different types of files

• Picture of the events of clusters - change value and the mouse down

  Hello everyone

  I am facing a problem of triggering events using two arrays of clusters.

  I have two paintings of clusters: A and B. There is a Boolean control within each group and to maintain the two paintings in clusters at the same index value (indexVals), the vertical scroll bar of A is hidden but the vertical scroll bar of B is visible. I was using a case with 3 cases triggered by structure: the mouse down, timeout and the mouse upwards. The case of "mouse down" feeds of terminal 1, which makes the case "timeout" the waiting period. The case of "timeout" continues to fuel terminal 1 timeout and has two property nodes (one for A and for B) makes the value of B indexVals is written on the indexVals of a. inside the case of "mouse up" it has a value of-1 for the terminal timeout, putting an end to the process. OK, it was working great. But...

  Now I need to keep the same procedures described above, but I need to raise an event when the user clicks any boolean (led) change state. I thought about the event "change value", but when I click on the led to trigger the event of "change value", the "mouse down" event is also triggered.

  Any suggestions?

  The real VI is a little different from what I described, but the problem is exactly the same.

  Thank you

  Dan07

  Like this:

  

• LabView RT versionconflict between the host and target

  Hello everyone,

  for my diploma, I work with a compact system in rio (cRIO-9074) with two I/O-modules. After some research, I created a small project which includes an fpga - and a host vi. I wanted to test my project, so I've compiled the fpga vi and you want to run the host-vi. But then I got an error that said that the versions of the software LabView real-time between the host PC and target (is the cRIO-controller meant?) are different.

  As a solution, I was told to check versions and reinstall the software Real Time using MAX. Now my problem is that I don't know where I can check the version and/or how I can solve the problem to get the project running.

  I added the errorwindow (in German) as an attachment.

  I hope you can help me.

  Better subject.

  Schu3

  MAX is measurement and Automation explore National Instruments.  Open, then expand "remote systems".  You should see your cRIO system.  Expand and you will see 'software' in the list.  Right-click on it and choose to install the software.  That will open a window that will allow you to select what software and what version to install on the cRIO.  Install the version of LabVIEW that matches the one that you use for development.

• The administrator password can be changed or bypass the administrator password?

  My girlfriend and I bought her sisters Dell PC, Windows Vista / Home Premium (2005) w/Microsoft (R) Windows (R) Build 6002: Service Pack: 2 we had our IP installed but I can not read because it keeps going to dial up instead of cable modum and I can't seem to a track because she forgot and dose not the computer administrator password. What can I possibly due?  Is it possible to change or bypass the administrator password?

  Hello

  With a second hand computer, you are better to reinstall the operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it is not applicaple, you need to reinstall the operating system.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Dell is press F8 at startup.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.