ATV4 loses a lot of server time that he sleeps

Similar Questions

• How can I change the font and size of legends? The manual says it's possible, but I lose a lot of time trying to find the way. Help please.

  The manual says it's possible, but I lose a lot of time trying to find the way. Help please.

  I think that the subtitle Editor is not very well developed, since I adapt the text, the timming, but then, text does not fit, or letters are very separated... and I can't work out these details.

  Thank you

  I don't think that you can change the size of the police with captions. I think that because it is a 'standard' you are limited to what this standard supports only. If the manual says: you can change the font size then it probably still says: you can change the fonts familty. I was never able to change the size of police or the family. The manual should be rewritten to prevent people to mislead him.

• Help! Dreamweaver keeps automatically 'putting' my model on the server every time that I save it.

  For some reason, Dreamweaver retains automatically 'putting' my model on the server every time that I save it, replacing the model that was originally there and I don't know why. It is never used to do this, and all my other sites work fine and do not have this problem... I don't want that to keep overwrite files I have on the server... does anyone know how to stop him from doing this you? I would greatly appreciate any help that anyone can give.

  If it helps, I'm using CS4.

  Thank you

  Catherine.

  Ok.  It looks like an incomplete installation.  Nevertheless, DW think that you have a local test server.  Every time that you save the files, he put copies in your C:\Users\Catherine\Pictures\tailormadeart folder.

  Except if you create dynamic web sites that use databases and scripts server side, you don't need a test in DW server.  All you need is a Local site and your remote server.

  For static HTML sites, I recommend you remove or clear the definition of testing server.  See screenshot.

  

  Nancy O.

• W32tm Windows Server time is off by 3 minutes. Perhaps.

  I have my Windows servers get their time to our primary domain controller, which is configured for synchronization with 0.north - america.pool.org.

  If I make one
  w32tm /stripchart /computer:0.north-america.pool.org
  Time that all the computers are on.  Same for time.nist.gov
  However, if I go to http://tycho.usno.navy.mil/cgi-bin/timer.pl , I get a time which is 3 minutes earlier.
  My w32tm Setup seems to work very well, but there seems to be some differences on what the exact time is according to what time server ask.
  Any ideas?

  Hello Midas,

  The question you have posted is related to Windows Server and would be better suited to the TechNet support. I suggest post you the question in TechNet support for more information.

  http://social.technet.Microsoft.com/forums/en-us/newThread?category=WindowsServer&Forum

• sbRIo synchronization with the SNTP server time

  Hello!

  I'm timing a sbRIo with a server time as described here:

  http://digital.NI.com/public.nsf/allkb/F2B057C72B537EA2862572D100646D43?OpenDocument

  I have a few questions:

  (1) what happens if the time server becomes inaccessible?

  (2) may source.sntp.address be specified as a name address to be rosolved by DNS? (It seems to me that if the name cannot be resolved, the Agency starts up in safe mode...)

  Thanks in advance for any response,

  Marco

  PS Sorry for the permutation (http://forums.ni.com/t5/Real-Time-Measurement-and/sbRIo-time-sync-with-SNTP-server/m-p/1951123),

  but the problem is very urgent...

  Hi Marco,.

  (1) if the time server SNTP becomes inaccessible, the cRio updates local time independently, from the last time value gets from the server

  (2) you're right, it does not work properly. The right way to express the source SNTP uses the IP address

  Kind regards

  Andrea R.

• KB2656353 security update has been downloaded every time that I have stop my computer and when I start upward again in recent days.

  This download is there yet.  It seems to be the same, this is the first time that I wrote the code at the end.  I still download, allowing to update at the stop.  It is not usually this many Microsoft Downloads.

  Full text of update: a security update for MS .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2656353)

  I have also had problems with my computer.  Had a friend for the holidays watch, which quarantined to a single file.  The only thing we could figure out was that my McAfee program was running whenever I clicked or moved in my email accounts and he used all of the memory 2 g.  So I switched browsers Firefox, McAfee was not doing this, then it was fixed.  After about 5 days at home, McAfee was running with Firefox and slow things down.  I have McAfee online and they are gone, removed a bunch of files placed in quarantine and not something in the software.  It helped, but I still have questions that I had before my friend watched during the holiday season.  (If my printer is left on my computer is hampering trying to close or start.)  I never had this problem at the last place I've lived, but also had a direct line to the internet modem, when I am on a wireless adapter.  And I had problems with the computer in my old USB ports corrupt flash drives.  (* sigh * I just turn my printer power on and off when I need and turn off wireless on this subject because of this problem.)

  I also had a warning of 'virtual memory is low' and also known as the end, and it is displayed when the computer is in standby or when I left it for a few minutes.  Again, I have 2G of RAM, but all these strange things began to happen as soon as I started running internet from a wireless key, not that I don't have the choice in my current setting.

  Thanks for your help!

  Angela

  Hello

  I suggest to perform the clean boot and then try to install the updates and check.

  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.

• Almost every time that I do a right-click to display a menu to do something such as delete or copy, the following error message appears: program internal error:.\Src\IntegrationToolsHolder.cpp,21

  Original title: internal program Errror

  I use XP Professional 32-bit.

  Almost every time that I do a right-click to display a menu of something for example delete or copy, you receive the following error message.

  Program internal error:.\Src\IntegrationToolsHolder.cpp,21

  If I click OK on the error message, it goes & I can then right click New & the appropriate menu appears and works correctly.

  Any ideas, please, as to what is the cause?

  Kind regards

  I told you I want to talk to you soon as you try these things.

  How to boot in Safe Mode and Clean worked for you?  Not at all useful?

  You said about this 2 weeks ago?

  Yet once, I fell in this place and the time and effort wasted because MS Answers forums invite to no system information when a new question is asked - but I digress.

  Update of security 908513 is included in Service Pack 3 update.

  Since forums MS Answers asks you any information from system when a new question is asked, we don't even know what Service Pack you have.  If you have SP3, you already have the update.  Two weeks and we don't know what is your Service Pack, what is your antivirus/antimalware environment...  We know that you have XP Pro 32-bit however.

  What you're likely to have is an extension of the Explorer Shell with a malfunction, and you can usually understand as follows:

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  If you can really achieve almost everytime you do a right-click and choose something like delete or copy, you're well on your way to understand.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success about the errors with the extension and to what other people have done on it... Maybe just to get an update of the program that adds the suspicious extension.

  You can Google something like:

  Explorer XP crashing

  (you must complete your suspect on behalf of add on)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the extensions one at a time non-Microsoft keep a list so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.

  Disable them one at a time until your right click on do not generate an error, then restart and test again.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately turned off, to disable an extension does not require a restart, but if you find the problem, I reboot and retest in all cases to be sure that the problem has disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• My date and time settings are set in Egypt and whenever updates of the laptop with microsoft server time, it increases of 1 h.

  My date and time settings are set in Egypt and whenever updates of the laptop with microsoft server time, it increases of 1 h.
  Recently in Egypt, changes of daylight has been cancelled and I guess that's the cause of the problem!
  Any ideas?

  If time was recently cancelled, you can go to your control panel:
  Panel-> data and time-zone (tab) >
  and uncheck the "automatically adjust clock for daylight saving time.

  Otherwise, you probably need to adjust your zone settings on your computer using Microsoft time zone Editor.

  TZEdit: <> http://download.microsoft.com/download/5/8/a/58a208b7-7dc7-4bc7-8357-28e29cdac52f/tzedit.exe >

  HTH,
  JW

• Why paint Pixelation my picture every time that I open it?

  Whenever I have use paint, it will be Pixelize my photo. If I make changes to my image and save it so the next time I open it with of painting the parts of the worst pixelated image every time.

  I use Windows XP - don't know if it matters, I'm just using the paint program that comes with it.

  For example, I have a black and white drawing of a boy on the one hand and the fruits of the other side. When I opened the image the 1st time that I noticed it wasn't quite as sharp I want so I spent a few hours there cleaning so that I can use the fill tool and make a nice clean fill. I filled the boy and saved the image to finish later. When I opened the image later it was all pixelly yet, and the boy was more crispy there was no way I could just use the fill tool again and change the color of her clothes without all over again.

  Help, please. Thank you

  the dimensions are 702 x 914

  ======================================
  On the one hand... 702 x 914 is a very low resolution image and
  I'm guessing it's a JPEG which is a lossy format. Whenever
  you edit and save a JPEG again he will lose resolution.

  If you had a higher resolution file to work with you can have
  a better result... also it can be useful if you convert the JPEG format for a
  lossless format such as TIFF or PNG before you modify and re-save it.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Defender said service stopped every time that I reboot.

  Windows Defender says that the server has stopped work on almost every reboot, at the same time that it does not say that, the window opens again say that the computer is good.

  Hi Chris-50 characters,

  Welcome to the Microsoft Answers site!

  We need more information to help you better question.

  (a) a) since when are you facing the issue?

  (b)
  (b) have you made recent changes to your computer?

  (c)
  (c) did you do the latest updates?

  (d)
  (d) what is the exact error message you get?

  However, you can try to change the startup mode of the Service from automatic to manual and run it and see if it can resolve the problem. Check because if windows

  Defender service is enabled. Follow the steps below to activate the service, restart the computer and check if the problem is resolved.

  (1) 1) click Start

  (2-2) type Services in the search bar

  3 (3)),right click on Services and select run as administrator

  (4-4) find Windows Defender in the new window that opens

  (5-5) double click on Windows Defender to open the Properties of Windows Defender window

  6) 6) on the tab general in the Properties of Windows Defender window, select the Startup Type Manual

  7) 7)under the Status of Service in the same window set it start.

  If the steps above did not solve the problem there could be some conflict with the Windows Defender security software to give the particular error. Perform a clean boot and see if it can resolve the problem.

  To perform a clean boot on a computer that is running Windows 7, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the Load Startup items check box.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.microsoft.com/kb/331796 . In addition, refer to the section on how to restore your computer to a Normal startup mode

  Hope this information is helpful

  Kind regards
  Varun J
  Microsoft technical support
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• The unit 3.1 (6) server time zone

  The unit 3.1 (6) server time zone is GMT - 5 Eastern time currently, will change the local Caracas GMT-4, which affect the unity Server? has no problem for the voice message timestamps?

  Thank you

  The unity server time zone is used for subscribers that have been left to 'use default' for their time zone (which is the default setting for new installations). So if you change the time zone on the server of the unit this time zone is used when Express stamps for subscribers.

  If a Subscriber is set to a specific time zone, already, this change has no effect.

• BlackBerry Smartphones my curve ORDER receipt EMAIL - 2nd time that this happens... Help

  I've had my BB for a month and already two times it has been impossible to get messages from my email accounts.  The hourglass keeps appearing on the screen... so frustrating!  I tried to turn it off, take the battery out and empty the cache.  The last time that I have saved on my desktop, wipe the device and it recharged.  I prefer not to do that every week... Is there anything else I can do to get the emails which crosses again?

  Hello

  Make it a habit to check your memory two or three times a day for a few days.

  Not enough memory could cause this condition. In this way, we can see beforehand if

  We're heading or a low memory condition. Your model should never drop below 15 MB

  now, you have relatively 36 MB of free space.

  Or if it happens again go to service connections and make sure your connections

  are available, then go right to the bottom of the screen and go to the mobile network menu press options and

  Select the diagnostic test, it will generate a log that you can read and send later for your carrier.

  I would then immediately go to options/advanced options / and go to the host routing table, click on for

  Enter, touch menu, select Register now. This register your phone on the network, get the latest version

  carrier to the updates, sell as service books. This will bring about stopping e-mail by updating the

  process. You will receive a verification email when they were sent.

  Finally, I don't know your level of experience, so if you know I'm sorry but if please read and let me

  not know if this is the case.

  Most people close the applications by pressing escape or the red button. This does not close the applications.

  Each application has an option CLOSE. For example, if you are in the calendar, press the menu key (spotted) and scroll down to the bottom CLOSE is listed. Go through each application and then press close. Go to the menu press browser and options select cache operations clear all categories and reached escape it will say cleaning memory.

  Go to options - security - garbage collection - enable. The BB will now clean up the memory when idle for 5 minutes.

  you will have an icon on the screen to clean the memory of you make sure you press it. Make sure that you use the button CLOSE whenever you're done with an application.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=8300&message.ID=9225#M9225

  If you follow the link and stay with your memory your phone will run smoothly.

  Lets leave the thread open and happen if memory is low or the condition happen again.

  Try to write down exactly what was going on with the phone at the time. Take a call,

  send/receive texts email surf the net. I know it's a lot, but random problems are the

  more difficult to identify.

  Let us know,

  Thank you

• Activation of Windows7 get error 0xc004c020 "the activation server reported that the Multiple Activation key has exceeded its limit."

  I installed Win7 Pro 64 - bit about 4 - 5 times with the same original key on the same computer, but now I have a problem; When I want to activate key, always error has occurred with this 0xC004C020 with description error Code: the activation server reported that the Multiple Activation key has exceeded its limit. How do I fix this problem?

  Hello

  Please find your resolution from this link: http://technet.microsoft.com/en-us/library/ff793399.aspx

  MAKs by design have a limited number of activations. Contact the Microsoft Activation call center.

  Hope that helps.

  Kind regards

  Joel

• Is SQLERROR EXIT FAILURE every time that a good when the script contains CFDS?

  Version: 11.2.0.2
  
  I always encountered scripts SQL with whenever SQLERROR... isn't this useless feature when we CFDS in the script?
  
  example of sql script
  

  set echo on
  set feedback on
  WHENEVER SQLERROR EXIT FAILURE
  
  spool mylog.txt
  
  
  create table testertab1 (ename varchar2(5));
  
  create table testertab2 as select * from all_objects;
  
  insert into testertab1 values ('PEDRO');
  insert into testertab1 values ('JONATHAN');
  
  commit;
  
  spool off

  The second INSERT will be error, but both the DDL to CREATE TABLE 2 above cannot be undone; There isn't, so no point in having every time THAT SQLERROR.... Right?
  
  But I met a lot of SQL scripts with CED which has every time what FAILURE of OUTPUT SQLERROR. Maybe developers do not understand the use of this SQL * more River correctly.
  
  
  No idea why P.Forstman uses whenever SQLERROR EXIT FAILURE THAT in his example in the thread below?
  dependencies on view (how to get invalid)

  whenever sqlerror will also react case of ddl errors. However it is not used to manage rollback situations. But to stop or restart the script even if an error occurs.

  It is frequently used for irgnore errors that come from a create command, where you are not sure if the object (table, etc) is already in place or not.

  The default behavior is that you want your script to stop if an error occurs. But not in the above mentioned case.

  ...
  whenever sqlerror continue
  create table myTable....
  
  whenever sqlerror exit
  insert into myTable .... 
  

• Server time and time local (Dreamweaver) off the coast of 1 hour

  How can I get Dreamweaver to show me the correct timestamp on my files on the server and my local computer? When I telnet on my server, the time stamp on the files is correct. My server time is correctly set to He (GMT-5). My local computer time is set correctly. I asked my sysadmin if PureFTP has all zone settings and sysadmin told me that all my server time and time zones are specific. My sysadmin says that Drwamweaver is the culprit.

  I lived with this for a long time, but it is extremely annoying and I would like to address.

  I searched high and low in the option settings in Dreamweaver for a sort of zone setting or offset - found nothing.

  Someone knows a problem of out-of-sync of 1 hour between real time stamp file on the server and what Dreamweaver it shows in the display of remote/Local files?

  Thank you.

  During the hour.

  http://forums.Adobe.com/message/3545349#3545349

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB