Audible manager - "device specific error".

Similar Questions

• BlackBerry smartphones receiving "connector specific error" when you try to synchronize 8310 w / Desktop Manager

  I've had my phone for over a year and never had any problems until this morning in Sync Center (when he was trying to read the contents of my calendar of the device), he shut it down and said "Connector specific error" and the synchronization ends. I tried to update my software to the latest version, because I was using 4.5, but even after I removed the 4.5 and installed to 4.7, I got the same error.

  Help!

  Joe

  EDIT: Remove personal information

  According to this article, one of the databases (calendar, address book, tasks, Notepad) is synchronized got corrupted.

  http://www.BlackBerry.com/BTSC/KB15294

  That is it stops on the synchronization?

  You'll probably end up deleting the database. First, use the backup and restore utility to perform a full backup of your data. Then, go to the backup and restore | Advanced. Select the database is damaged on the right side and press the Clear button. In doing so, you clear all the entries in this database.

  Try to make a synchronization later and see if it goes through okay.

• R7500 Dynamic DNS - no ip - manage devices

  Hello

  I had set up dynamic DNS using no. - ip (NETGEAR supplier - "*.") mynetgear.com') on my router R7000, before.

  Now, I changed to a R7500.

  But my noip.com account still has the 'old' R7000 device under host / redirects-> manage devices.

  And I can't seem to remove the R7000 and serial number. (and I don't have the R7000 no more).

  The R7500 refused to apply the account settings for:

  Service provider: NETGEAR

  E-mail:

  Password:

  without any error message.

  I missed something?

  Thank you

  Hello

  I can't remove the R7000 go in my list of devices (or at least, I can't find a delete option).

  BUT after removing the hostname of my old camera AND delete the full host name subsequently (on noip.com), I could re-register the R7500 with my host name. So ultimately it works again!

  Noip.com, on the R7000 is more listed as acive device, but it seems that I can't delete the old of my list.

• Cannot activate Clip Jam with Audible Manager

  I've seen a lot of posts on the forum about the problems with Sport Clip / Clip Zip / Zip Clip + and Audible Manager.  Add Clip jam to this list.

  Until you can transfer books on the device with the Audible Manager, you're supposed to 'activate' the device.  When I try this, I get "Failed to set the activation of device data."    Other SanDisk devices have the same problem, but none of the workarounds to solve the problem for other devices work for the Jam Clip.

  Someone at - he heard of a fix or a workaround for the Jam Clip to activate with Audible Manager?

  Thank you.

  I just got the solution of sound support.  It is similar to the solution used for the Sport Clip: the drive letter assigned by Windows for the Jam Clip must be changed by default.

  Instructions for Windows 7:

  With the Jam Clip connected to the computer, select Control Panel-> administration-> computer management tools

  In the computer management dialog box, select disk management in the left pane.

  One of the disks will be the Jam Clip.  Right-click on it and select "Change Drive Letter and paths... »

  Select the current drive letter and click on 'change... '. »

  Assign the drive B: for the Jam Clip letter (assuming that you have not already another device, for example a floppy drive)

  Under Audible Manager, in the bottom right pane, where it says 'Sansa Clip Jam', make sure that the 'Internal' option button is selected.  With the new drive letter assigned, you can then activate the device.

  Good luck!

• nVidia graphics disappeard Manager devices, unable to re - install the driver.

  Three days earlier, when I start my computer it didn't detec my offboard nVidia card (detected only my onboard Intel graphics card). When I tried to re - install the nVidia Driver, I get the error: "this graphics driver cannot find compatible graphics hardware.

  I browsed the community and found someone who had a similar problem (http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/nvidia-graphic-card-does-not-show-up-in-device/d773c616-7767-47c0-94be-b35d77727941)

  So I tried the following:

  -------------------------------------------------------------------------

  Method 1:

  First of all, I suggest you to run the following Microsoft Fixit to get the problem automatically detected and corrected. This fixit checks if the device is currently disabled or turned off or the driver is not installed.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Sometimes, some devices in Device Manager are hidden by corrupt or missing drivers.

  Follow the steps below to view devices hidden in the device manager and troubleshoot accordingly.

  1. Press the Windows key + X
  2. Select prompt (Admin)
  3. Type set devmgr_show_nonpresent_devices = 1 and press enter
  4. Type Start DEVMGMT. SMC and press ENTER.
  5. Once in Device Manager hit the view menu and select Show hidden devices.

  From there, remove every instance of the Nvidia card you see as well as each unknown device. Quit Device Manager and reinstall the latest you can find for your graphics card drivers.

  After installing the drivers, reboot and see if you get different results.

  ----------------------------------------------------------------------------------------

  I haven't worked out, so I updated my BIOS, re-installed all the drivers of my motherboard and the problem is still...

  I have a motherboard Intel DH55HC Hunter Cove, I have not any material changes before the problem and the graphics card cooler works great when the PC is turned on.

  Can someone help me please?

  

  So three years ago, you didn't do no software changes is? Not the new drivers and Windows updates?

  The Nvidia gpu, btw?

  -If the machine has been moved or struck some dust may have got into the PCIe slot.

  With the machine unplugged, remove the card, clean the slot with a small brush and reposition the map.

  and the power/s connector.

  -Do you have a System Restore Point that dates back to before that you had first of all the problem?

  If so, do a restore at this time there can help, if the card is not failing.

  -Try the card in another machine, or another card in your machine, would also help determine

  If the card is faulty.

  -I think that the Nvidia card should show in Manager devices without worrying, but after the BIOS update

  have you checked in the BIOS to check graphics Nvidia isn't somehow it disabled?

  EDIT: After looking at the other thread, I see you have uninstalled and reinstalled the

  NVIDIA drivers already-

  -Drivers Nvidia graphics and components (PhysX, etc.) still listed in programs and features?

  If so, try to uninstall, reboot, and reinstall this driver

  (If you did not remove the Nvidia folder in C:\ you can reinstall the drivers from there.

  It is there that the installer download you "unpacks" the files before installing).

  .

• Specific error of connector for blackBerry Smartphones

  Just upgraded to Curve 9360. Now, when I synch I get an error when it tries to sync the calendar: connector specific error. No other information. It is the synchronization log:

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  22/04/2012 09:23
  Synchronize the device calendar with Microsoft Outlook calendar

  First system: device
  Second system: Microsoft Outlook
  Second file system name: calendar
  Conflict resolution: notify
  Beach of appointment: 04 22, 2012 at 12/31/3099
  Device data source: «BlackBerry calendar»

  --> Records duplicate found!

  Total of the entries of the first system: 0

  Used for the translation field mapping:
  Device Microsoft Outlook
  Description title - subject
  Notes - body
  -Place
  Alarm Date - Date alarm
  Time alarm - the alarm time
  Start date - Date of start
  Start - Start time
  End date - End Date
  End time - end time
  Alarm indicator - Set Reminder indicator
  Free availability - time to see the like
  Participants - the meeting
  Private - private

  Internal error.
  Cancelled translation!

  There is nothing in Event Viewer to suggest what is the problem. I tried to uninstall all Blackberry software by downloading and installing the latest version of the software as an administrator. Can anyone suggest anything else I can try?

  He solved. Go to desktop, device, delete data. Delete everything to do with the calendar. Check your synchronization copy of the Outlook on the device. It synch. All sorted.

  I hope that anyone else who saves the two hours it took me to find!

• BlackBerry Smartphones connector specific error Intellisync / Internal Error #4238

  Hello everyone.  I got my phone from Blackberry storm about 2 weeks ago and it worked perfectly.  I could back up my files and synchronize my Contacts from the Windows address book.  I had 68 Contacts inside and today I added 5 more to make 73.  I went to sync the phone and just as he was on sync contacts, I have a message "the Intellisync connector specific error."  I then checked the logs, and on the bottom of the log, it says "Internal Error #4238".

  I deleted and reinstalled the Blackberry Desktop Manager and reset my computer and phone several times.  I also wne in the section advanced and deleted contacts from your phone and tried to reinstall the and installed only 44 of them and got the same message "the Intellisync connector specific error."  I was on the phone with Verizon for an hour and they could not help.

  I am running Windows Vista.  Any help appreciated.

  I tried that suggested bifocals, and for some reason, I couldn't understand it.  So what I did I e-mailed me contacts, 15 at a time and it worked perfectly.  Prior to sending contacts, I just had to be converted to .vcf files.

• Install the Audible Manager.

  Original title: program programs application Applications compatibility

  I want to install Audible Manager from audible.co.uk on my computer which runs Windows8. It is apparently inconsistent. How can I solve this problem?

  Help!

  Hello, Leonor,.

  1. what exactly happens when you try to install Audible Manager?

  2. what web browser you use to access the internet?

  3. is the specific question of the installation of Audible Manager?

  You can check the compatibility of the application from the link:

  http://www.microsoft.com/en-in/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-in&TextSearch=Audible%2Bmanager&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Method 1:

  Try to install the program in clean boot mode and check:

  Reference:

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting"

  under more information to prepare the computer to start as usual after a repair.

  Method 2:

  Check out the link and follow the steps in the article:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• The VMware Workstation Server service stopped with service specific error %-1.

  Hi, when I try to enable sharing in Workstation 8 GTR | Change | Preferences | Sharing virtual machines, I get an error Impossible to configure the workstation server. Check the event log, I found they were trying to start the VMware Workstation Server service that does not start (even when you try to start it manually) and the following error is recorded "the VMware Workstation Server service stopped with service specific error %-1." by the Service Control Manager. I found no additional cases related.

  Running on Windows 7 SP1 x 64. The port is set to 7443.

  I also tried to find a newspaper there instead of vmware, but neither found anything related; However I could have missed something.

  Thanks for all the ideas, what could be wrong and how to fix it.

  Hello

  I have Workstation 8.0.1 installed on two laptop computers each running Windows 7 SP1 x 64... the shared component of the virtual machine runs on one but not the other. On the machine that I have problems with I uninstalled Workstation and reinstalled - without success. What I ended up doing to replace the datastores.xml file in the Directory go (C:\Documents and Settings\All Users\Application Data\VMware\hostd) on the laptop with the problem with the file datastores.xml of the laptop that works - success! I knew that there was a problem with the file because I've been poking around and noticed that the datastores.xml file is not open for editing - it was corrupted.

  I have attached the file to this message.

  Change of the section at the location that you store your shared VM (be sure to not use a UNC, which breaks the service as well!).

  I hope this helps.

  Steve

• "ORA-19554: device allocation error, device type: SBT_TAPE device name:

  Hello expert.
  why I can't delete obsolete?
  I have this error:
  "ORA-19554: device allocation error, device type: SBT_TAPE device name:
  but I did not all bands. How can I remove this from my config of rman?
  Thank you very much, as usual.
  see you soon,
  Lain
  
  

  RMAN> show all;
  
  RMAN configuration parameters are:
  CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
  CONFIGURE BACKUP OPTIMIZATION OFF; # default
  CONFIGURE DEFAULT DEVICE TYPE TO DISK;
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/oraclesvi/TMP/backup_db_archive/cf_%F';
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # default
  CONFIGURE DEVICE TYPE 'SBT_TAPE' BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 1;
  CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 1;
  CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
  CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
  CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
  CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
  CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT   '/oraclesvi/TMP/backup_db_archive/ora_df%t_s%s_s%p';
  CONFIGURE MAXSETSIZE TO UNLIMITED; # default
  CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
  CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
  CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/opt/oracle/product/10.2.0/SvilTMP/dbs/snapcf_DBTMP.f'; # default
  
  
  RMAN> report obsolete;
  
  RMAN retention policy will be applied to the command
  RMAN retention policy is set to redundancy 2
  Report of obsolete backups and copies
  Type                 Key    Completion Time    Filename/Handle
  -------------------- ------ ------------------ --------------------
  Archive Log          1      28-MAY-10          /oraclesvi/TMP/flash_recovery_area/DBTMP/archivelog/2010_05_28/o1_mf_1_22_60086j50_.arc
  Archive Log          2      29-MAY-10          /oraclesvi/TMP/flash_recovery_area/DBTMP/archivelog/2010_05_29/o1_mf_1_23_6014bh9j_.arc
  Archive Log          3      30-MAY-10          /oraclesvi/TMP/flash_recovery_area/DBTMP/archivelog/2010_05_30/o1_mf_1_24_603o6gls_.arc
  
  RMAN> delete obsolete;
  
  RMAN retention policy will be applied to the command
  RMAN retention policy is set to redundancy 2
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of delete command at 06/14/2010 14:43:17
  ORA-19554: error allocating device, device type: SBT_TAPE, device name: 
  ORA-27211: Failed to load Media Management Library
  Additional information: 2

  Try

  CONFIGURE DEVICE TYPE 'SBT_TAPE' clear;

  Werner

• A service specific error: 2

  Hello
  
  I'm trying to configure the database for the first control and I get this
  
  C:\ > emctl start dbconsole
  ORACLE_SID environment variable not defined. Please
  
  C:\ > SET ORACLE_SID = ocp11g
  
  C:\ > emctl start dbconsole
  Oracle Enterprise Manager 11g Database Control is
  Copyright (c) 1996, 2007 Oracle Corporation. All the r
  https://Ronaldlee-PC:5500 / console/em/aboutApplicati
  From Con database Oracle Enterprise Manager 11 g
  P11G support is turned on...
  The OracleDBConsoleocp11g service would not star
  
  A service specific error: 2.
  
  More help is available by typing NET HELPMSG 3547.
  
  I tried to go through a work around where they recommend rename Ronaldlee/db_1-pc_ocp11g and oc4j/j2ee/OC4j_DBConsole_Ronaldlee-pc_ocp11g.
  
  When I try to start the OracleDBConsoleocp11g I get an error which is the same as above.
  
  If someone could help me?
  
  My oracle 11g database is installed on Vista.
  
  Thank you
  
  Rlee

  PL specify what version of Vista. Oracle is only supported to run on Business, Enterprise, and Ultimate Editions

  http://download.Oracle.com/docs/CD/B28359_01/install.111/b32006/reqs.htm#CHDJJHJG

  HTH
  Srini

• All deauthorise & manage devices

  Hello

  After a clean install of Windows my PC appears twice in "manage devices". I can't delete the old one (button remove grayed out because the unit has signed in the last 30 days).

  I thought 'Deauthorise All' could solve the problem, so I clicked on it... the message of not being able to deauthorise within 90 days appeared so I guess it exercise was carried out... but all my PC's are always in the "device management".

  Must "Deauthorise All" withdrew all PC to "Manage devices" or are these separate things?

  Thanks in advance,

  SJW

  These are different things. Authorization/deauthorising only applies to iTunes on the computer and an account may be authorized to the maximum of 5 computers at a time-, there is no time limit to allow/deauthorising of individual computers, you can do it as often as you want ("deauthorise all" cannot be done once every 12 months). Allowing you to play this content of accounts and synchronize on iPods and iOS devices.

  Devices of management section lists the computers or devices that are associated with an account for example by redownloading past purchases on them, to aid automatic downloads, iTunes game: view and delete associated devices in iTunes - Apple Support

  Once associated, you cannot remove the link until 90 days have passed (I believe it's an attempt to try to stop people by logging into their account on other computers, and redownloading people and sharing of purchases).

  You can have a total of 10 devices/computers associated with an account, but as a computer must also be allowed until he could become associated, at least 5 of the 10 can be computers.

• I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

  frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

  Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

  On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

  ``````~~~~`````

  In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

  In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

  It may be useful to eliminate equipment defects

  Type of memory in the search box of start and choose Memory diagnosis

  In a command prompt (type command in the start search box then right click and choose Run as administrator) type

  CHKDSK c: /r

  If you have more than one drive replace C: with the other drive letters.

  Search for corrupted files by typing at the command prompt

  sfc/scannow

  You can clean boot troubleshooting http://support.microsoft.com/kb/331796

• How can I reset using windows XP digital rights management when an error message appears as 0xC00D2782

  I used my MP3 player to download digital books from the library using Overdirve Media Console.  Recently, I received a message indicating that an error has occurred.  He said that I had problems of digital rights management.  The error was 0xC00D2782.  I was not able to fix this problem.

  Does anyone have any suggestions?  I use Windows XP

  You will need to contact Overdrive for assistance.

  You can try to reset the DRM store, but you will lose the license for any protected media you have, and may not be able to access. Unfortunately, this may be required if Overdrive is unable to help.

  http://support.Microsoft.com/kb/891664

• When you try to schedule a task in XP, make a mistake "the new task could not be created the specific error is 0x80070005: access is denied."

  My

  System Type X 86-based PC
  Processor x 86 Family 6 Model 23 Stepping 10 GenuineIntel ~ 3324 Mhz
  A05 BIOS Version/Date Dell Inc., 07-31-2009
  SMBIOS 2.5 version

  I'm trying to schedule a new task I get this error

  The new task could not be created specific error is 0x80070005: access is denied

  I am an administrator for this computer and I am connected to the office network.

  I downloaded a patch KB904423, but it tells me that the installer has detected that the SP of the system version is newer the updte I am applying, I did not need to install this update

  Is there any fix for this?

  Thank you

  Hi dgxp64,

  ·         The computer is on a domain network?

  Method 1: Temporarily disable the antivirus on the computer program and check if it helps. If it works, you may need to check the settings of the program.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Method 2: Check to see if this article helps you.

  How to solve the scheduled tasks in Windows XP and Windows Server 2003

  Method 3: We will grant permission for the C:\Users folder and check if it helps.

  How to set, view, change, or remove special permissions for files and folders in Windows XP

  If the computer is on a domain network you can post your query on the TechNet Forums.

  Windows XP IT Pro category