All deauthorise & manage devices

Similar Questions

• No, I don't have Photos to open for each managed device iOS

  I have recently updated our administrative MacBook with OS X 10.11.2 iPad. I use it to manage all of our devices with Configurator. Whenever one of the devices is wiped and restored, Photos automatically opens. Even if I uncheck the Image Capture for the iOS device it reappears after restoration.

  If you manage a large number of iOS devices it becomes FRUSTRATING to NO END.

  Is it possible to disable the application pictures to launch automatically at all times?

  Only one by one while they are connected to unchecking the checkbox to open the Photos when the unit is plugged

  Apple certainly needs remedy to this - say - http://www.apple.com/feedback/photos.html

  Someone posted a hack just now - no idea if it works or is safe (probably) has gone after each update of the OS - if you are looking for Photos for Mac Ant that's where

  LN

• HELP - All the USB device does not not - Vista Ultimate

  I have a desktop P4 computer and ran on Vista Ultimate for more than 1 year (window updated constantly). Everything worked smoothly until one night, all my USB devices don't work anymore. Based on the Device Manager, the USB are ok, check my BIOS, everything remains unchanged.

  now, I got tired of reinstalling the same operating system and at the end of the installation, all USB devices do not work.

  Please can someone advise what should I do to recover my devices USB working again.

  It is the motherboard or the operating system has problems?

  Hi Dragon,.

  Follow the instructions below and check whether it is hardware or operating system issue.

  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Check whether the problem is resolved.

  If this does not work, you can try to update the chipset drivers and see if the problem is resolved.
  Looking for drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista

  If the problem persists, contact the manufacturer of your computer to update BIOS that may help you resolve the issue.

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also check out the link below.
  Rollup cumulative update for USB in Windows Vista Basic components
  http://support.Microsoft.com/kb/941600

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• nVidia graphics disappeard Manager devices, unable to re - install the driver.

  Three days earlier, when I start my computer it didn't detec my offboard nVidia card (detected only my onboard Intel graphics card). When I tried to re - install the nVidia Driver, I get the error: "this graphics driver cannot find compatible graphics hardware.

  I browsed the community and found someone who had a similar problem (http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/nvidia-graphic-card-does-not-show-up-in-device/d773c616-7767-47c0-94be-b35d77727941)

  So I tried the following:

  -------------------------------------------------------------------------

  Method 1:

  First of all, I suggest you to run the following Microsoft Fixit to get the problem automatically detected and corrected. This fixit checks if the device is currently disabled or turned off or the driver is not installed.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Sometimes, some devices in Device Manager are hidden by corrupt or missing drivers.

  Follow the steps below to view devices hidden in the device manager and troubleshoot accordingly.

  1. Press the Windows key + X
  2. Select prompt (Admin)
  3. Type set devmgr_show_nonpresent_devices = 1 and press enter
  4. Type Start DEVMGMT. SMC and press ENTER.
  5. Once in Device Manager hit the view menu and select Show hidden devices.

  From there, remove every instance of the Nvidia card you see as well as each unknown device. Quit Device Manager and reinstall the latest you can find for your graphics card drivers.

  After installing the drivers, reboot and see if you get different results.

  ----------------------------------------------------------------------------------------

  I haven't worked out, so I updated my BIOS, re-installed all the drivers of my motherboard and the problem is still...

  I have a motherboard Intel DH55HC Hunter Cove, I have not any material changes before the problem and the graphics card cooler works great when the PC is turned on.

  Can someone help me please?

  

  So three years ago, you didn't do no software changes is? Not the new drivers and Windows updates?

  The Nvidia gpu, btw?

  -If the machine has been moved or struck some dust may have got into the PCIe slot.

  With the machine unplugged, remove the card, clean the slot with a small brush and reposition the map.

  and the power/s connector.

  -Do you have a System Restore Point that dates back to before that you had first of all the problem?

  If so, do a restore at this time there can help, if the card is not failing.

  -Try the card in another machine, or another card in your machine, would also help determine

  If the card is faulty.

  -I think that the Nvidia card should show in Manager devices without worrying, but after the BIOS update

  have you checked in the BIOS to check graphics Nvidia isn't somehow it disabled?

  EDIT: After looking at the other thread, I see you have uninstalled and reinstalled the

  NVIDIA drivers already-

  -Drivers Nvidia graphics and components (PhysX, etc.) still listed in programs and features?

  If so, try to uninstall, reboot, and reinstall this driver

  (If you did not remove the Nvidia folder in C:\ you can reinstall the drivers from there.

  It is there that the installer download you "unpacks" the files before installing).

  .

• Power of fire effect registration of managed devices Management Center?

  Hello

  I have a solution that was rolled out with an incorrect hostname of the Manager of FMC on each managed SFR.

  When you do a show module sfr, I get the correct ip address for CME.

  First question :

  1 / is the name of the CMF locally on each managed SFR arbitrary? My ASA see the output reveals that the LICO sees the correct ip address for our CME. But our SFR currently has a host name incorrect due to an incorrect/old dns at configuration time record

  For example

  ASA CLI

  View details of sfr module

  
  Addr DC: X.X.X.X (ip address)

  connected to the sfr module

  console session sfr

  > Display managers
  Type: Manager
  Host: incorrect.name.com (which is no longer corresponds to the IP above)
  Inscription: finished

  Second Question

  Can I change the hostname of a CME without registration of effect to all managed devices or the SSL certificate? The company wants to use firepower.internal.different.com

  For example,.

  CMF hostname is currently

  Firepower.Name.com

  DNS for its ip address is now

  Firepower.Internal.different.com

  The SSL certificate currently refers to CN of firepower

  You can change the host name by using the following command: -.

  > set up network hostname ABCDEF

  Its best to re-register the device once more. When you save the unit, it will automatically create a UUID between the Firesight and firepower to keep the communication channel. In your case if the UUID is the host name and you change the host name after registration of the device then it can lead to problems of connectivity communication channel.

• Alerts when a managed device is in offline mode?

  OME can be configured to send an alert message when a managed device is offline for a period of time or number of attempts to vote?

  We have branches who have lost the power of building recently and we would like to be alerted when these managed servers are offline.

  Thank you

  Brent

  Hi Brent,

  When OME is not able to reach a server in the status survey, OME automatically generates an internal alert to say that the system is broken. All you have to do is to go to the preferences page > parameters alerts and make sure that enable state alert internal connection. Point to note, it is enabled by default.

• Can I delete all the pictures of all my Apple devices and keep my albums stored in iCloud

  Hi all

  I've been Googling everywhere to try to find the answer to this, but I still have no clear answer.

  I want to delete all my photos (which are already stored in iCloud), all my Apple devices, it's ok for me to access photos of the iCloud.com as long as I can use this space for other data in my cameras.

  If you delete photos from iCloud they are also removed from the devices who consider them, so no.

• my Macbook just stop to connect to one of my yahoo email (failed connection) accounts can I connect on all my other devices

  my Macbook just stop to connect to one of my yahoo email (failed connection) accounts can I connect on all my other devices

  Delete and re add the password for that account or delete and re add this email account.

• R7500 Dynamic DNS - no ip - manage devices

  Hello

  I had set up dynamic DNS using no. - ip (NETGEAR supplier - "*.") mynetgear.com') on my router R7000, before.

  Now, I changed to a R7500.

  But my noip.com account still has the 'old' R7000 device under host / redirects-> manage devices.

  And I can't seem to remove the R7000 and serial number. (and I don't have the R7000 no more).

  The R7500 refused to apply the account settings for:

  Service provider: NETGEAR

  E-mail:

  Password:

  without any error message.

  I missed something?

  Thank you

  Hello

  I can't remove the R7000 go in my list of devices (or at least, I can't find a delete option).

  BUT after removing the hostname of my old camera AND delete the full host name subsequently (on noip.com), I could re-register the R7500 with my host name. So ultimately it works again!

  Noip.com, on the R7000 is more listed as acive device, but it seems that I can't delete the old of my list.

• should I disconnect iCloud on all my apple devices before you reset my old iPad

  I got a new iPad 2 Air for Christmas and I want to give to iPad 4.  I want to restore it to the factory setting before I give it.  Should I disconnect iCloud on all my Apple devices before I restore old iPad?

  You do not need to do this, just disconnect on the iPad, you are finished with (settings > iCloud) then all clear (settings > General > reset > erase all content & settings).

• A single storage backup subscription can be shared with all family shared devices?

  A single storage backup subscription can be shared with all family shared devices?

  I have a family membership of 200 GB storage for 5 of my iPhone backups under an account id unique apple.

  I'm separating each iPhone at its own apple ID to avoid current problems. Can I share the backup of the storage with the family share?

  If I can't, I'll have to buy a subscription to backup for each device that will be more expensive.

  Unfortunately, iCloud storage cannot be shared under sharing of family.  See more details here- family shares - Apple Support

• Photosmart HP 7520: All wireless network devices will lose connectivity after printing

  Dear all, 
  
      I have a problem with my HP Photosmart 7520 printer where all wireless network devices will lose connectivity after a printer has been sent to the printer.
  
  * Summary
  Wireless network unusable after sending one print to HP printer
  No device ( computers nor smartphones ) can use the Internet nor access internal networks ( 192.168.0/24)
  
  * Details
  Turn HP printer on.  ( wireless direct is off - never turned on )
  HP printer connects to working wireless network.
  Other devices ( phone/computers ) already connected and working.
  From any device, send a document to the printer.
  Printer prints document successfully.
  Immediately after printer has printed all devices cannot access internet IP range ( including HP printer ) nor Internet nor router ( 198.168.0.1 ).
  
  * Reproducibility
  Always
  
  * Work around
  Disconnect all devices from the network.
  Power off printer.
  Reboot Internet router.
  
  * Attempted solutions
  Removed wireless configuration.
  Factory reset.
  Added wireless configuration back.
  Powered on and off printer.
  
  * Printing tested with
  Tested with Macbook10.11/Windows 8/Ubuntu 12/Android 4.4.2
  
  * Not tested
  Ethernet cable directly connected to router.
  
  * Internet Router
  Netgear CG 3700
  

  Number of brand and model of the router?

  These settings are to set up your printer wireless (or wired):

  • Stay connected to your router
  • Trouble printer status 'offline '.
  • Wake mode 'sleep'
  • All wireless devices stay better connected

  While the DHCP is convenient, devices like printers (wired and wireless) should always be assigned a (fixed) IP address manually to avoid conflicts on your wireless network and must be outside the range of the router DHCP.  After the adjustment of the static IP address the computer must be updated to show a Standard TCP/IP port with the IP address of printers under printer properties/Ports.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here and here and still more here.  Video here explains the problem and how to solve the problem. <--> So watch this!
  2. Or check in the printer "Auto Off/sleep/Energy Saving Mode" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check your printer properties.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. Make sure that the printer is connected directly to a socket wall and not to a UPS, power strip or a lightning arrestor. This will cause the printer to drop offline connection and disconnection (checked yes!).

  Additional measures to take if you continue to have the problem (if they are posted)...

• just turned on computer all the safety devices are disabled and will not not turn on ie... MSE DEFENDER FIREWALL

  just turned on computer all the safety devices are disabled and will not not turn on ie... MSE DEFENDER FIREWALL

  Vista Home premium 32-bit

  Hello

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  ABon the Defender being turned OFF

  With MSE installed Windows Defender is supposed to be disabled.

  MSE has been designed with its own version of Windows Defender under its own program.

  If the two were running, it would cause system conflicts.

  See you soon.

• Backup of firepower of managed devices

  Hello world!

  Please help me understand what I am doing wrong.

  I want to save my power of fire management center management devices.

  I then:

  -Go to the menu: System - Tools - Backup/Restore

  -Press on: Managed Backup Device

  And the problem is that I didn't have my camera in the list of managed devices (see attachment no. name) devices.

  Please explain to me how do I backup my modules of firepower. For more information, my FP modules are added to the center of management of public Service and already configured

  Thnx

  Concerning

  This feature is limited to dedicated appliances fire power (7000 and 8000 series) and therefore does not support modules of firepower in an ASA.

  Reference: http://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration...

• BlackBerry smartphones ' you have used all your available device pin changes for your My World account.

  I recently replaced my BB Tour Sprint with Sprint, and when you try to reinstall my apps world bought for BB looks like this: "you have used all your available device pin changes for your My World account.» I'm getting this error when I try to use my BB Tour with the NEW PIN {led by privacy}, the email account used is {under the direction of privacy} a way to solve this issue? I had a few exchanges with Sprint, because Tour trackball problems. I enjoy using App World, however I can't buy something again or recover my previous purchases with this error. My previous PIN is 30BE5BD9 (I got to the list because the BB tech support link listed my new PIN invalid - as well as my old pin code). Please notify.

  PS: Crackberry App World made a PIN exchange a simple question - simply plug your new PIN and you can easily recover your purchased applications. RIM's App World support really dropped the ball on this one - there are a lot of tricks of BB exchanged and this App World problem really needs to be rectified. There were already several messages on this forum about it, and the owners are not able to submit their complaint to the BB technical support because the link would not accept their new PIN! Shame on you RIM.

  Hello!

  There is actually a fix for all your questions, but the first that needs to be fixed is the answer to bad PIN code on the RIM support site. However, this hotfix cannot be displayed publicly. Therefore, please check your private Messages on this site for a PM from me with these instructions.

  BTW - if you think also that your message has been changed by the mods to delete any personal information (pines, e-mail addresses, etc.). .. as a public forum, it is generally not a good idea to post them here. In addition, these forums are a user to channel... support not a portal user-to-RIM...

  See you soon!