Audio and video automatically not bound

Similar Questions

• Audio and video are not equal?

  Hi all

  I am fairly new (1 week) to Adobe Premiere Pro CC 2015... I recently got this very frustrating problem, when I record a video with Bandicam (video: MPEG-4, full size, 60 fps and 100 q/quality;) Audio: AAC - Advanced Audio Coding, 48.0 KHz, stereo, 192 Kbps). The problem is that the Audio and video play at different times. To put this into perspective: you record your video, you download it in Premiere Pro, you put it on the timeline, preview you and when you then say "type in the chat"Hey"free stuff" isn't hitting on video!

  It frustrates me to the end!

  Here's somethings, that I ALREADY did...

  Overview •Render (ENTER)

  •Try to register again

  Changing the video codec via Handbrake

  If you have any suggestions I'D LOVE to hear them.

  Thank you.

  Tyler

  Convert framerate constant with HandBrake

  or use these settings:

  

• M30 - buttons Mode Front and control Audio and video do not work

  Hello

  Front Mode and Audio/video control buttons do not work

  Any ideas?

  Thank you

  Hello

  As far as I know the Toshiba utility controls is responsible for the use of the key.
  Have you tried to install Toshiba controls?
  See the page of the Toshiba driver for this driver.

  Good bye

• 11 elements of Prime Minister.  When I drag the Media "add" video to the timeline, the audio and video are not synchronized

  pointers?

  markdeer

  1. download and install handbrake.

  https://handbrake.fr/

  2. in the workspace of hand brake that opens...

  a. Select Source/open a file... Select your video on his drive hard save location

  (b) in the following line, where it shows 'Chapters', I change that to 'seconds '.

  c. destination, find and set your backup location for your exports of handbrake.

  d. container defined in Mp4 if it is not set to that already.

  e. photo Tab... leave as is and move on

  f. video tab

  • Video codec H.264 (x 264) of =
  • = 23.976 framerate
  • and make sure that there is a point to select "Constant" for this frame rate

  g. click on the Start button at the top left of the workspace.

  h, look at the progress at the bottom bar to the left of the workspace for the

  Message Queue completed. The work is done. Your @23.976 H.264.mp4 1920 x 1080 progressive constant cadence

  Can be found at the location set up in "Destination".

  i. import of the H.264.mp4 in Premiere Elements with pre-defined project manually defined prior to

  NTSC

  DIGITAL SLR

  1080 p

  DSLR 1080 p 24

  and determine if the video and audio on the timeline are now synchronized.

  RTA

• Audio and video are not synchronized

  When I watch videos online, video and audio download slowly, more and more out of sync.  Someone suggested that I had a codec problem.  What's the verdict?

  Hello Francisco Anconia,.

  1. this happens with all the video files you watch online or special videos?

  2. What is the site you are trying to stream videos online of?

  3. you play the video files online using flash player or you stream them to Media Player?

  There is no verdict on this issue until we have find the format and the Web site you are trying to stream multimedia files.

  This problem may be due to codecs or acceleration hardware or firewall when you try to stream multimedia content. Please give us more information than how you exactly, you try to play the videos.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Audio and video out of sync after rendering

  Hey!

  I already asked a fairly identical question like this, but I have some news:

  First of all, my problem is that after the export of the audio and video is not synchronized as in the scenario. Well, many have told me that he deals with variable frame rates, because I have images is 25 frames per second and sequences with 29.97 fps. But normally first would have changed directly each element in my sequence (25 fps, 1920x1080p) settings. And later when I add the clip in MediaInfo, he also tells me that the frame rate is 25 fps constant, not Variable. So I think that this is not yet the problem more.

  But now, here's a little 'story': when I open the video after the return of his perfectly synchronized WITH the VLC Media Player (and not Windows Media Player).

  And my question is: how is this possible? Couldn't, I now just change the Standart to VLC Player and then upload it to Youtube with the normal sync? What is the difference between windows media and VLC media player in this case player? Maybe it's because I have a few Quicktime footage in my sequence, which can be read with VLC Media player and not with windows media player?

  If you have any ideas, let me know!

  Thank you

  You basically answered your own question. VLC has proved to be more versatile and superior then the WMP.

• Satellite Pro A120: DVD/CD burner does not burn audio and video files

  Hello

  I have the Satellite Pro A120 with a cd/dvd burner MAT * a uj-8415. It works very well with data Brüning, but...

  When you try to burn the MP3 files or video files on DVD or CD/r or any type of audio file, it suddenly gives me an error message telling me that the cd can no longer be used.

  I tried hole Sonic (RecordNow), through Nero 6, and also directly by dragging and dropping files, but all was in vain. This MATI * a uj-8415 machine has also made the same error while burning a DVD double layer.

  Again, the unit reads all types of CD and DVD and writes also all types of files with the exception of the audio and video.

  Can you help me please to solve this problem?

  Hello

  I know that some mp3 files and audio are protected against copying and burning on different CDs or DVDs so could not work? ¦

  Other reasons why you can't write these files to CD or DVD is simply a problem of compatibility between the STRANGE and the CD or DVD.
  According to my experience, not all CD or DVD is supported, and these compatibility issues are not really rare.

  I also have another idea.
  Have you heard of burning of problems caused by the bad registry entry? I mean the upper and lower filters...

  Please check this doc MS:
  http://support.Microsoft.com/kb/270008/en-us

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  .. .and see if it helps.

• Podcast app not explicit audio and video podcasts on Appletv 4 (gen)

  IS their a fix for this problem.  Podcasts audio and video podcasts play fine. When I try to play or to subscribe to a podcast with content explicitly. A warning, it does not support explicit content.

  Podcast app won't play all content explicitly. And you can't subscribe to a podcast with explicit content.

• HDMI output on Apple TV 4 sends audio and video on TV, not just audio and video for TV to a stereo receiver

  Just hooked up our new Apple TV. Excited is no longer need to use both optical HDMI cables so that everything happens [with our compatible audio receiver HDMI.] But to hook the HDMI cable to the receiver, it sends audio and video to the TV. The audio will not play back via the receiver which is very annoying. Anyone else having this problem?

  It all depends on how your receiver and the TV are connected. the general idea that underlies the HDMI, is that he send audio/video in HD quality via the same cable...

  my system is configured - Live tv on HDMI1, HDMI2 on ATV, bluray on HDMI3 and cable optical audio output to receiver - no "entry" material I look at, the audio comes through tv receiver.

  on the other hand, my father has everything connected to the receiver via HDMI, which acts as a transition to television, but he needs to change the entry on BOTH the TV and the receiver...

  How is your audio connected TV to the receiver - it cable on which exit?

• Equium A60-199: audio and video control buttons not working not

  Audio and video control buttons used to work for windows media player, but now they are not, I wondered if I had pressed or something changed by mistake, or maybe I need to take it to be fixed? Help, please.

  Hello

  AFAIK utility Toshiba controls must be preinstalled if you have correct functionality. Check this box on your device.

  Good bye

• I formatted and reinstalled xp to correct some problems and my multimedia audio and video vga drivers were lost. I do not have a CD with info and the Add Hardware Wizard cannot find the drivers. How can I fix it?

  I formatted and reinstalled xp to correct some problems and my multimedia audio and video vga drivers were lost. I do not have a CD with info and the Add Hardware Wizard cannot find the drivers. How can I fix it?

  You may be able to download the drivers from the web site of the manufacturer of the computer.

• Audio and video of the iPhone, do not sync in Premiere Pro

  Good afternoon! I'm having a problem with the synchronization of audio and video when I change the first adobe, recorded two videos for my iphone 6s and edited first by using sound effects, png and JPEG images and includes texts by the Prime Minister himself, but half of the video with impatience I lose audio sync with video I thought I had done something wrong, has remade the editing and even once, there was this error how can I solve this problem? Recognizing!

  
  

  Title edited by Kevin Monahan
  

  Hello

  The 6s iPhone uses the camera application which does not reliably draw a constant cadence, he shoots at a variable rate. You can buy apps that take on a constant pace, however.

  To fix your issue, you need to transcode into something like the hand brake. Then import it back to Premiere Pro. Next time use a better application.

  See you soon,.
  Kevin

• audio and video not synchronized. returned to projects already finished and they also are not synchronized. What could be the problem?

  Audio and video not synchronized. Returned to previously published projects and they also now not synced. What could be the problem?

  Figured that generator out of sync unplugged. Thank you

• Audio and video files that has already worked on my computer no longer works.

  Audio and video files that has already worked on my computer no longer works and I get one of the three messages which are as follows:

  (1) the file can be used (but it is not used by another program, and then media player that I use to try to read the audio/video file)

  (2) you may not have access to the location of the file (and yet I am the administrator of the computer, I am the only user with access to the computer and I installed the files myself and they have worked fine up until now.)

  (3) your proxy setting may be incorrect (I use automatically detect my proxy settings that is the same settings I use for my network and the Internet.)

  All of the files in question worked previously but now continue to show these problems. If anyone can give me any information as to how I can get these files restored to their values of work please feel free to respond below or send a personal email with your solutions to * address email is removed from the privacy *

  Yours,

  Brent

  Hi Brent,

  You can try to uninstall last updates window who installed or do a system restore to a point before the updates have been installed and then install updates one by one to see which update is causing the problem.

  Method 1:

  You can read the following article to remove an update.

  Remove an update

  Method 2:

  If you cannot uninstall the updates, then you can try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Method 3:

  Try to install updates one at a time to see the update is causing the problem.

  Install Windows updates

  Hope this information is useful.

• How can I me audio and video synchronized?

  I use first 13 with Windows 8.1 items to change the old VCR tapes that I transferred to my computer with WinTV.  Everything seemed to work - until the middle of the edition of the band, the audio is 8 seconds behind the video.  I checked the original in my computer that I added to first Elements and audio and video are synchronized, but in the middle of editing, they are out of sync.  There is no way to cut off the part of the video without also carve out part of the audio now synchronized.  No way have to slide forward only audio.   I tried to delete the new part of the original in Premiere Elements and then adding back all original and cutting of part I had already edited but audio-video synchronization is still off.  Any ideas?

  Pulfnick

  First 13 items on Windows 8.1 (supposed 64bits).

  If you have not already the case, update 13-13.1, using Help Menu/implementation of an open project.

  First of all ensure that you (manually) or project (automatically) set preset to match the properties of your

  source file. See Edit Project Menu/Settings/general and the readings for the Mode of time base edition, image size and Pixel Aspect

  Ratio (even if the fields search grayed). If your source is VCR tapes, I am projecting that you deal with Standard 4:3 which would point

  to make the project preset according to your predefined project DV Standard NTSC or PAL DV Standard configuration.

  Reading the script contained in the monitor of the editing area, you should look at and listen to the content timeline made (i.e. no color

  line on content or a green line). Is this the case?

  A manoeuvre to deal with this kind of situation (if alternatives are missing).

  a. unlink video and audio.

  (b) you hold ALT on the main keyboard to the computer, press the arrow key left or right. A single tap = 1 help from frame. Or, as

  you hold it the main computer keyboard Shift + Alt keys, press the left or right arrow key. A single tap is 5 frames progressive jackpot.

  Please read and review, and so let me know if I have targeted your question. If not or need clarification, please do not

  not hesitate to tell me.

  Thank you.

  RTA