audio and video issues

Similar Questions

• issue audio and video of Linked files

  When I let fall the first pro of the source files in first pro then move that either the audio or video files around them are not related, even though it says they are related when I right click? When I drag either or around, they separately move which was not the case in earlier versions of first pro. (just to clarify, I'm grabbing the entire file from the source monitor not the separate audio and video files)

  Hey Joe,

  You did it that linked Selection is highlighted?

  

  Thank you!
  Regalo

• operating Windows 7 Home Premium, 2 user accounts. Running a Firefox user can run audio and video, the other cannot. Can anyone help?

  Two accounts put in place. You can listen to some audio and video using Firefox, the other account can not. The account cannot broadcast a / v is able to steam has / v to aid (sigh) MS Internet Explorer. Is there a setting that I messed up?

  There are some compatibility issues between the last Flash drive and a few Add-ons Firefox or settings. Could see you if anything in this article helps you: 11.3 Flash does not load video in Firefox.

• Qosmio F60: audio and video distortion during playback of a media file

  Qosmio f60 / win 7 64 bit / 8 GB ram / 1 GB video card...
  Purchase date: June 2011

  question: audio and video distortion during playback of a media file

  of fact steps:

  (1) updated drivers audio & video > update bios > sent to Toshiba UAE; reformatted > replaced speakers; same CPU > (more funny when im not connected online using wifi, everything is good and ok) > dealers replaced wireless nic > No. SUCCESS still questions...

  (2) being researched a few discussions > reinstalled the drivers SATA > IRST update of intel > no still no chance > uninstalled TSRI > used Mirosoft AHCI > HDD and PC health monitor update > disabled all the > always unlucky (this solution came from TOSHIBA himself of their technical knowledge base)

  Resellers cannot identify the problem... I followed the technical knowledge base and still not solved...

  CAN SOMEONE PLEASE HELP ME SOLVE THIS ANNOYING PROBLEM? IT BECOMES NOWHERE >

  Toshiba tech support, please help me to solve this issue... I just bought recently and I didn't like that at all. It is not worth...

  > more funny when im not connected online via wifi, everything is good and ok
  Does this mean that this problem appears only using the WiFi network?
  Hmm how about Wlan driver update? Try this.

• Satellite Pro A120: DVD/CD burner does not burn audio and video files

  Hello

  I have the Satellite Pro A120 with a cd/dvd burner MAT * a uj-8415. It works very well with data Brüning, but...

  When you try to burn the MP3 files or video files on DVD or CD/r or any type of audio file, it suddenly gives me an error message telling me that the cd can no longer be used.

  I tried hole Sonic (RecordNow), through Nero 6, and also directly by dragging and dropping files, but all was in vain. This MATI * a uj-8415 machine has also made the same error while burning a DVD double layer.

  Again, the unit reads all types of CD and DVD and writes also all types of files with the exception of the audio and video.

  Can you help me please to solve this problem?

  Hello

  I know that some mp3 files and audio are protected against copying and burning on different CDs or DVDs so could not work? ¦

  Other reasons why you can't write these files to CD or DVD is simply a problem of compatibility between the STRANGE and the CD or DVD.
  According to my experience, not all CD or DVD is supported, and these compatibility issues are not really rare.

  I also have another idea.
  Have you heard of burning of problems caused by the bad registry entry? I mean the upper and lower filters...

  Please check this doc MS:
  http://support.Microsoft.com/kb/270008/en-us

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  .. .and see if it helps.

• Audio and video files that has already worked on my computer no longer works.

  Audio and video files that has already worked on my computer no longer works and I get one of the three messages which are as follows:

  (1) the file can be used (but it is not used by another program, and then media player that I use to try to read the audio/video file)

  (2) you may not have access to the location of the file (and yet I am the administrator of the computer, I am the only user with access to the computer and I installed the files myself and they have worked fine up until now.)

  (3) your proxy setting may be incorrect (I use automatically detect my proxy settings that is the same settings I use for my network and the Internet.)

  All of the files in question worked previously but now continue to show these problems. If anyone can give me any information as to how I can get these files restored to their values of work please feel free to respond below or send a personal email with your solutions to * address email is removed from the privacy *

  Yours,

  Brent

  Hi Brent,

  You can try to uninstall last updates window who installed or do a system restore to a point before the updates have been installed and then install updates one by one to see which update is causing the problem.

  Method 1:

  You can read the following article to remove an update.

  Remove an update

  Method 2:

  If you cannot uninstall the updates, then you can try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Method 3:

  Try to install updates one at a time to see the update is causing the problem.

  Install Windows updates

  Hope this information is useful.

• Windows 7 audio and video stutter problem

  Recently when I watch videos (be it youtube, shake, DVD or videos on my hard drive) apparently at random my audio and video will be stutter.

  I tried to disable hardware acceleration, it did not help. I have the latest video and audio drivers (that I know) and it seems to happen more predictable when I run a software intensive treatment like utorrent, it is not get recorded by the recorder of camtasia studio or bandicam (first being a screenshot while the second is a game of capture) I tried to catch in the Act to make a short video to demonstrate the problem , but he has not registered. the video seems quite well with no stutter.
  I have: Windows 7 Home premium 64-bit
  graphics card: NVIDIA GeForce GTX 660 (tested by alienware benchmarking to work perfectly)
  Processor: Intel Core i7-3820 CPU @3. 60 GHz quad core
  Under "sound video and game controllers" in Device Manager there: NVIDIA High Definition audio.
  NVidia, Virtual Audio Device (extensible wave) (WDM)
  Realtek High Definition Audio
  All claiming to have the latest drivers when I have them check for them.
  My version of windows is up to date and I am completely baffled because I did not install anything new in the last few weeks, but this problem started about 2 weeks ago.
  What is my problem? Y at - he of the info, I did not think I should? If so let me know what and I will update this
  Update 1: this issue is still not resolved, despite the installation of codecs and update of the adobe flash player, I always get the question every time I launch a program or open a new tab in google chrome

  I had the same problem. I have exeprienced a random 1-2 dry freeze when I played games online (for example, League of Legends, Maple Story, etc.) or on my gaming laptop youtube videos. After countless trials and errors, the problem solved when I disabled the "NVIDIA device Audio (Extensible Wave) (WDM)"audio driver in Device Manager. The man was this frustrating...

  Kind regards

• Audio and video of the iPhone, do not sync in Premiere Pro

  Good afternoon! I'm having a problem with the synchronization of audio and video when I change the first adobe, recorded two videos for my iphone 6s and edited first by using sound effects, png and JPEG images and includes texts by the Prime Minister himself, but half of the video with impatience I lose audio sync with video I thought I had done something wrong, has remade the editing and even once, there was this error how can I solve this problem? Recognizing!

  
  

  Title edited by Kevin Monahan
  

  Hello

  The 6s iPhone uses the camera application which does not reliably draw a constant cadence, he shoots at a variable rate. You can buy apps that take on a constant pace, however.

  To fix your issue, you need to transcode into something like the hand brake. Then import it back to Premiere Pro. Next time use a better application.

  See you soon,.
  Kevin

• Premiere Pro CC 2015 video / Audio won't play - Out-of-Sync Audio and video clock errors

  After the installation of Premiere Pro CC 2015 I am unable to actually play my video in the timeline.

  I must point out that the same video and audio files accurate work perfectly in my previous version of CC 2014.

  Usually when I hit the play button nothing will happen and then after a time it will stutter back and fourth between a small loop (no audio present) and give an error that says "clock Audio and video out-of-sync (instead of time) in"Adobe Player.

  I tried full uninstall and reinstall Premiere Pro CC software 2015 without success. I also tried to delete all the preferences of Premiere Pro to my settings user without success. I should also mention that after effects CC 2015 is oddly also often send me errors do not have enough executives, so I'm not sure if they are related. Once more, the CC 2014 version works perfectly.

  For reference the video file is a .avi with Xvid compression and sound is a .wav. These have always been used exactly the same with CC in 2014 without problem.

  Computer:

  8.1 - fully updated for Windows

  NVIDIA GTX 780 video card

  32 GB of ram

  3770K i7 processor

  All Nvidia drivers are also updated.

  I also ran a full virus and malware scan just in case for some strange reason, that was at fault, and I ran into zero issues. Media Encoder, Photoshop, and Illustrator CC 2015 that all seem to work great.

  I am quite technically savvy and this one left me speechless, that really stinks that I was looking forward to the potential improvements to speed updates. That's life.

  Matt Borchert wrote:

  Nothing seems to be enabled. The CAD is what is selected in CC 2015 as shown in the image above. It is the only available thing to choose, and I can't select None or disable.

  Thank you.  In 2015, CC, you can click on the settings... button in the Audio hardware preferences.  Then in the record of the OS dialog box tab, you can disable manually (for example, right-click and choose the appropriate option) the SPDIF input.  It is only a temporary workaround until get out us a patch with a fix, but let me know if it works for you.

• Fusion audio and video clip

  Will be the first evidence of fusion audio and video clips so that I can then change them as a clip?

  richardb

  So that we keep in sync, I just wanted to clarify something... it is, your question is not out of sync audio before or after export. Ask not how to synchronize audio in Premiere Elements. Using the tools of Premiere Elements, you have been able to successfully replace the sound of the iPad with another audio source and synchronize the new audio source to component video without much trouble with Premiere Elements. I think that is correct based on what you wrote

  I found that I can synchronize the two audios and then delete one of the iPad and then link other audio and video. It seems that I can then edit the video and keep the linked video and audio.

  What did you use as your tools of Premiere Elements for the audio synchronization - Alt and arrow key (left or right) faucet to shift the audio 1 frame left or right or the SHIFT + ALT and arrow (left or right) tap to push 5 audio images left or right? These are details of Windows... for your Mac, did you use Option Alt and shift + Option for Shift + Alt? I'm strictly a Windows of the elements user.

  I hope that your future posts will clarify the following to make sure that we are clear about what your goals and make sure you have the information you need to work on your project.

  Is there a reason why you couldn't do all in a project and an export - create your Timeline with iPad video and audio special for it but also make additions to the project timeline prior to export of this timeline to a final product of Premiere Elements?

  If everything goes well and there is no problem that you have not mentioned, I would try to avoid re-encoding involved in the export and import of export in another project where the only issue is another exporting.

  Please consider.

  Looking forward to hear your progress as your schedule allows.

  RTA

• You can embed audio and video in a captivate file?

  I was wondering if it is possible to incorporate audio and video into a captivate slideshow files somehow so that no sidecar files are needed?

  or do I always have to keep separate files mp3 and flv related the long side of the captivate file?

  Thank you!

  Hello

  It's a pleasure. Thanks to the development of the issue.

  You don't have to get the audio files or viseo everywhere. Once you have inserted the files in Captivate, you need only to take the rest of the file .cptx files will remain in the project.

  I hope this helps!

  Thank you!

• Binder/sync Audio and video

  I think I'm right on the right edge if this can work:

  I have a rough cut of a few clips using audio on the device. I also recorded with a separate audio recorder. I want to sort a secondary audio link to the primary audio and video clips from the source, so that the secondary audio will be added for the first mounting without having me to go and re - synchronize each change with the corresponding secondary audio. Is it possible to sync the audio added in a source file and have a reflection in an edited sequence?

  Aligning each camera with audio clip associated with its own sequence, then changing using these sequences rather than the original clips is one of the best ways to proceed in the light of your starting point.

  Audio drift should not be apparent on reasonable periods of clip (for example, up to 10 or 20 minutes) depending on the stability of the clock in the audio device.  Many reports were due some manufacturers using audio rates slightly non-standard who first then supposed to be correct and therefore generated out-of-sync issues for about 30 minutes or more.  Not your problem here.

  If, when you check the sync audio on a full clip, you know it's OK at first but in the end, then setting a marker for both video and audio at the end and using the rate stretch on the audio to change its length by a small amount to align the markers should give good enough sync for the clip.

• Mix audio and video down? (no export)

  I was wondering if a user can MIX down audio and video without video exportng and reload again in the project...

  Also if anyone can tell me if the leaders of the scale are of any use outside their use as marker, for example may control playback within a certain range? Forgive my loose terminology.

  

  Certainly!

  When you say mixing, you hear to raise the level of the volume in some places and lowering in others? This was done using audio keyframes.

  Keyframes for audio can be done directly on the timeline. Just select a clip and position the playhead CTI top, and then click a keyframe in the header of the track, to the left of the audio track. This will create a keyframe to the position of ICT. This issue will increase the volume and lowering it would decline. You can create and position as keyframes that you need to mix your audio tracks.

  Regarding your problem of reading, you can isolate which sector you edit, make or exit by placing the work area bar (the light gray color bar that runs along the ticker on the timeline) so that it covers only a part of your project.

  (I see you've ordered my books, Carlton! Good for you! These and many other topics is covered quite well in them.)

• I accidentally blocked play audio and video on the BBC website. How can I unlock it?

  Today, a new video palyed often opens the door to a range of other unwanted videos.
  When my cursor hovered over this video window, engine block sign will appear in the upper right. I clicked on it, thinking that he would block the Stream of videos. Instead, who had arrested ALL the audio AND video games I can get on the BBC website.
  How can I unlock it?

  Hi, please see under the permissions tab and check the setting of the Flash - Page Info window - see technical details on the page you.

  If you are using an adblocker as Adblock Plus, also look at options/filter preferences.

  Either way, you have several version of Shockwave Flash - the oldest should be deleted - How to uninstall the Flash if necessary.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• iMac 7.1 displayport switch audio and video?

  Hi all

  My family would like to connect his iMac 7.1 2.4 Ghz Core2Duo until his TV downstairs, and I was wondering if the displayport located on these iMacs can transmit video and audio through, if we were to get a displayport HDMI adapter. Thank you

  The computer is about 10 years old, this vintage iMacs didn't have the ability to cross the Mini DVI audio & video port. The computer would need to discreet cables for audio and video.