issue audio and video of Linked files
When I let fall the first pro of the source files in first pro then move that either the audio or video files around them are not related, even though it says they are related when I right click? When I drag either or around, they separately move which was not the case in earlier versions of first pro. (just to clarify, I'm grabbing the entire file from the source monitor not the separate audio and video files)
Hey Joe,
You did it that linked Selection is highlighted?
Thank you!
Regalo
Tags: Premiere
Similar Questions
-
audio and video synchronization on a file in the library media player Windows 7 Home Premium 64-bit
How can I synchronize audio and video on a file in the library media player Windows 7 Home Premium 64-bit
video play about a second faster than the audio, the download is good, cause it works on another computer on a flash drive...How can I synchronize audio and video on a file in the library media player Windows 7 Home Premium 64-bit
video play about a second faster than the audio, the download is good, cause it works on another computer on a flash drive...Set up a device to sync in Windows Media Player
-
Audio and video files that has already worked on my computer no longer works.
Audio and video files that has already worked on my computer no longer works and I get one of the three messages which are as follows:
(1) the file can be used (but it is not used by another program, and then media player that I use to try to read the audio/video file)
(2) you may not have access to the location of the file (and yet I am the administrator of the computer, I am the only user with access to the computer and I installed the files myself and they have worked fine up until now.)
(3) your proxy setting may be incorrect (I use automatically detect my proxy settings that is the same settings I use for my network and the Internet.)
All of the files in question worked previously but now continue to show these problems. If anyone can give me any information as to how I can get these files restored to their values of work please feel free to respond below or send a personal email with your solutions to * address email is removed from the privacy *
Yours,
Brent
Hi Brent,
You can try to uninstall last updates window who installed or do a system restore to a point before the updates have been installed and then install updates one by one to see which update is causing the problem.
Method 1:
You can read the following article to remove an update.
Method 2:
If you cannot uninstall the updates, then you can try to perform a restore of the system to a prior restore point you have been affected by the issue.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
To run the system restore, you can consult the following link:
System Restore: frequently asked questions
Method 3:
Try to install updates one at a time to see the update is causing the problem.
Hope this information is useful.
-
Qosmio F60: audio and video distortion during playback of a media file
Qosmio f60 / win 7 64 bit / 8 GB ram / 1 GB video card...
Purchase date: June 2011question: audio and video distortion during playback of a media file
of fact steps:
(1) updated drivers audio & video > update bios > sent to Toshiba UAE; reformatted > replaced speakers; same CPU > (more funny when im not connected online using wifi, everything is good and ok) > dealers replaced wireless nic > No. SUCCESS still questions...
(2) being researched a few discussions > reinstalled the drivers SATA > IRST update of intel > no still no chance > uninstalled TSRI > used Mirosoft AHCI > HDD and PC health monitor update > disabled all the > always unlucky (this solution came from TOSHIBA himself of their technical knowledge base)
Resellers cannot identify the problem... I followed the technical knowledge base and still not solved...
CAN SOMEONE PLEASE HELP ME SOLVE THIS ANNOYING PROBLEM? IT BECOMES NOWHERE >
Toshiba tech support, please help me to solve this issue... I just bought recently and I didn't like that at all. It is not worth...
> more funny when im not connected online via wifi, everything is good and ok
Does this mean that this problem appears only using the WiFi network?
Hmm how about Wlan driver update? Try this. -
Satellite Pro A120: DVD/CD burner does not burn audio and video files
Hello
I have the Satellite Pro A120 with a cd/dvd burner MAT * a uj-8415. It works very well with data Brüning, but...
When you try to burn the MP3 files or video files on DVD or CD/r or any type of audio file, it suddenly gives me an error message telling me that the cd can no longer be used.
I tried hole Sonic (RecordNow), through Nero 6, and also directly by dragging and dropping files, but all was in vain. This MATI * a uj-8415 machine has also made the same error while burning a DVD double layer.
Again, the unit reads all types of CD and DVD and writes also all types of files with the exception of the audio and video.
Can you help me please to solve this problem?
Hello
I know that some mp3 files and audio are protected against copying and burning on different CDs or DVDs so could not work? ¦
Other reasons why you can't write these files to CD or DVD is simply a problem of compatibility between the STRANGE and the CD or DVD.
According to my experience, not all CD or DVD is supported, and these compatibility issues are not really rare.I also have another idea.
Have you heard of burning of problems caused by the bad registry entry? I mean the upper and lower filters...Please check this doc MS:
http://support.Microsoft.com/kb/270008/en-usCompletely remove the Upperfilters and Lowerfilters from the following registry key values:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}.. .and see if it helps.
-
You can embed audio and video in a captivate file?
I was wondering if it is possible to incorporate audio and video into a captivate slideshow files somehow so that no sidecar files are needed?
or do I always have to keep separate files mp3 and flv related the long side of the captivate file?
Thank you!
Hello
It's a pleasure. Thanks to the development of the issue.
You don't have to get the audio files or viseo everywhere. Once you have inserted the files in Captivate, you need only to take the rest of the file .cptx files will remain in the project.
I hope this helps!
Thank you!
-
Download and save audio and video files
Hello
I am trying to record audio and video files that are larger than 5 MB in size.
I open a Http connection and asking to 128 KB each time until the completion of the data transmission.
for some files that are 1 to 2 MB code does not work well, but if you have large files MB it throws the error, ' Eception Exception: myApp Application (201) does not; process is completed"
How can I fix this error. I searched the forum for this error, I found some funda but has not found a solution.
AM making ala invokeAndLater() and therefore not blocking is not the eventThread.
Here is the flow of my code that establishes the connection and starts to download.
the following code snippet shows the flow of the code.
// Constructor: displays a popup screen that allows the user to select a list of audio/video files for the download. // Dictionary obj is a vector that contains list of file names.// IAudioVideoPopUp is an interface implemented by the caller. public AudioVideoPopUp(Dictionary[] v, IAudioVideoPopUp guideIntroManager) { super(new VerticalFieldManager()); if( v!= null) { caller = guideIntroManager; for(int i =0; i< v.length; i++) { btnFileNames = new MyButtonField(v[i].value.toString(), "images/button1_big.png", "images/button2_big.png", true, Font.PLAIN, 18, v[i]); btnFileNames.setChangeListener(new FieldChangeListener() { public void fieldChanged(Field field, int context) { if(field instanceof MyButtonField) { final MyButtonField tempField = (MyButtonField) field; UiApplication.getUiApplication().popScreen(UiApplication.getUiApplication().getActiveScreen()); synchronized (UiApplication.getEventLock()) { UiApplication.getUiApplication().invokeLater(new Runnable(){ public void run() { UiApplication.getUiApplication().pushScreen(new WaitScreen()); caller.onClick(((MyButtonField) tempField).getDictionaryData()); } }); }// PopupCloseThread pct = new PopupCloseThread(field);// pct.start(); } } }); add(btnFileNames); } btnCancel = new MyButtonField("Close", "images/button1.png", "images/button2.png", true, Font.PLAIN, 18); btnCancel.setChangeListener(new FieldChangeListener() { public void fieldChanged(Field field, int context) { UiApplication.getUiApplication().popScreen(UiApplication.getUiApplication().getActiveScreen()); } }); add(btnCancel); } }// onClick method that was implemented in the caller. // dictionary is a vector, contains info about the selected file in the popup. public void onClick(Dictionary dictionary) { if(dictionary != null) { switch(ContentType) { case 1: playAudio(dictionary); break; case 2: videoSelected(dictionary); break; default: break; } } }// the following code calls for the downloading and saving of the file. private boolean downloadAndSaveVideo(long movieID2, String fileName, String URL, int fileSize) { if(URL!= null) { try { String videoFileURL = AppConstants.SDCARD+AppConstants.CONTENT_PATH+fileName; if(new DownloadCombiner(URL, videoFileURL, 128*1024).run()) { return updateVideoTable(movieID2, videoFileURL); } } catch (Exception e) { Tools.print("XCO: GuideIntroManager: downloadAndSave: Error..:" + e.toString()); } } return false; }// this is not a thread class. // here an repeatdly making the requests to get all the data.// please go thru the run(). public DownloadCombiner(String remoteName, String localName, /*int connection,*/ int chunksize) { this.remoteName = remoteName; this.localName = localName; this.chunksize = chunksize; } public boolean run() { boolean result = false; try { int chunkIndex = 0; int totalSize = 0; /* * File connection */ FileConnection file = (FileConnection) Connector.open(localName); if (!file.exists()) { file.create(); } file.setWritable(true); OutputStream out = file.openOutputStream(); /* * HTTP Connections */ String currentFile = remoteName; //+ connectionType(); Tools.Debug("Full URL: " + currentFile); HttpConnection conn; InputStream in; int rangeStart = 0; int rangeEnd = 0; while(true) { Tools.Debug("Opening Chunk: " + chunkIndex); conn = (HttpConnection) Connector.open(currentFile,Connector.READ_WRITE, true); rangeStart = chunkIndex * chunksize; rangeEnd = rangeStart + chunksize - 1; Tools.Debug("Requesting Range: " + rangeStart + "-" + rangeEnd); conn.setRequestProperty("Range", "bytes=" + rangeStart + "-"+ rangeEnd); int responseCode = conn.getResponseCode(); if(responseCode != 200 && responseCode != 206) { Tools.Debug("Response Code = " + conn.getResponseCode()); break; } Tools.Debug("Retreived Range: "+ conn.getHeaderField("Content-Range")); in = conn.openInputStream(); int length = -1; byte[] readBlock = new byte[256]; int fileSize = 0; while((length = in.read(readBlock)) != -1) { out.write(readBlock, 0, length); fileSize += length; //Thread.yield(); // Try not to get cut off } totalSize += fileSize; Tools.Debug("Chunk Downloaded: " + fileSize + " Bytes"); chunkIndex++; // index (range) increase in.close(); conn.close(); in = null; conn = null; /* * Pause to allow connections to close and other Threads to run. */ //Thread.sleep(1000); } Tools.Debug("Full file downloaded: " + totalSize + " Bytes"); if(totalSize>0) { result = true; Tools.Debug("Wrote file to local storage"); }else{ result = false; file.delete(); } out.close(); file.close(); } catch (Exception e) { result = false; Tools.Debug(e.toString()); } return result; }A little patience please. Don't forget that you are awake does not mean that other people are. I'd leave a Thread open for at least 24 hours before bumping.
I'm sorry to tell you that invokeLater runs the executable on the wire of the event, not a separate Thread. If you have actually started the treatment in the very thing you're trying to get away from.
You must run the execution in DownloadCombiner treatment in a separate Thread. This is why, in the article, which I suppose you DownloadCombiner, it extends Thread.
Just for the record, DownloadCombiner is here:
How - to download large files using the BlackBerry Mobile data system
Article number: DB-00619
http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800431/How_To _... -
When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Adobe first Pro 2015 CC only!
Please make sure that the audio and video tracks are highlighted.
-
When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Thank you for your help in advance
You must set the source patch:
-
Hello
First of all, let me say that cocomo is large and has already turned several heads to my company. We hope a reasonable price system.
Secondly, in the white table, is it possible to download an image in there?
Third, I've just started playing with cocomo. I have tried a few examples and one thing that always comes errors when audio and video is used. This happens with the defaultpods and examples of webcam... I get an error, it's prob. a step that I have missed, but during loading, I get these errors... Any ideas what I'm missing? Thank you!
ReferenceError: Error #1069: nearID property not found on flash.net.NetConnection and there is no default value.
at com.adobe.rtc.sharedManagers::StreamManager/createStream() [C:\work\main\connect\cocomoPla yer10\src\com\adobe\rtc\sharedManagers\StreamManager.as:662]
at com.adobe.rtc.collaboration::WebcamPublisher/createMyStream() [C:\work\main\connect\cocomo Player10\src\com\adobe\rtc\collaboration\WebcamPublisher.as:1028]
at com.adobe.rtc.collaboration::WebcamPublisher/publish() [C:\work\main\connect\cocomoPlayer1 0\src\com\adobe\rtc\collaboration\WebcamPublisher.as:645]
and
ReferenceError: Error #1065: flash. media::SoundCodec Variable is not defined.
at com.adobe.rtc.clientManagers::MicrophoneManager/get selectedMic()
at com.adobe.rtc.clientManagers::MicrophoneManager/set _1703516469micIndex()
at com.adobe.rtc.clientManagers::MicrophoneManager/set micIndex()
at com.adobe.rtc.clientManagers::MicrophoneManager()
at com.adobe.rtc.clientManagers::MicrophoneManager$/getInstance()
at com.adobe.rtc.sharedManagers::StreamManager/findCodec()
at com.adobe.rtc.sharedManagers::StreamManager/onUserRemove()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at com.adobe.rtc.sharedManagers::UserManager/userRemoved()
at com.adobe.rtc.sharedManagers::UserManager/onItemRetract()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
to com.adobe.rtc.sharedModel::CollectionNode/ http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveItemRetraction()
to com.adobe.rtc.messaging.manager::MessageManager/ http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveItemRetraction()
at com.adobe.rtc.session.managers::SessionManagerBase/receiveItemRetraction()
Thanks for the quick responses!
Everything is working well now, I was using player10 CFCS, once I changed my settings it worked. -
I think I'm right on the right edge if this can work:
I have a rough cut of a few clips using audio on the device. I also recorded with a separate audio recorder. I want to sort a secondary audio link to the primary audio and video clips from the source, so that the secondary audio will be added for the first mounting without having me to go and re - synchronize each change with the corresponding secondary audio. Is it possible to sync the audio added in a source file and have a reflection in an edited sequence?
Aligning each camera with audio clip associated with its own sequence, then changing using these sequences rather than the original clips is one of the best ways to proceed in the light of your starting point.
Audio drift should not be apparent on reasonable periods of clip (for example, up to 10 or 20 minutes) depending on the stability of the clock in the audio device. Many reports were due some manufacturers using audio rates slightly non-standard who first then supposed to be correct and therefore generated out-of-sync issues for about 30 minutes or more. Not your problem here.
If, when you check the sync audio on a full clip, you know it's OK at first but in the end, then setting a marker for both video and audio at the end and using the rate stretch on the audio to change its length by a small amount to align the markers should give good enough sync for the clip.
-
Dumpsters and noise in audio and video players
Hi, all my audio and video players in the laptop, the present jump (interruption) and noise, while playing, can someone help me please?
Hi Sergiorey,
This problem can occur if the device controller or audio sound card is out of date.
I suggest you to see the following link for more information.
Play an audio or video file: frequently asked questions (what can I do on the audio problems, such as popping, crackling, or sound that plays too fast or too slow?)
http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file-frequently-asked-questions
Post us the results once you try the steps above.
-
Premiere Pro CC 2015 video / Audio won't play - Out-of-Sync Audio and video clock errors
After the installation of Premiere Pro CC 2015 I am unable to actually play my video in the timeline.
I must point out that the same video and audio files accurate work perfectly in my previous version of CC 2014.
Usually when I hit the play button nothing will happen and then after a time it will stutter back and fourth between a small loop (no audio present) and give an error that says "clock Audio and video out-of-sync (instead of time) in"Adobe Player.
I tried full uninstall and reinstall Premiere Pro CC software 2015 without success. I also tried to delete all the preferences of Premiere Pro to my settings user without success. I should also mention that after effects CC 2015 is oddly also often send me errors do not have enough executives, so I'm not sure if they are related. Once more, the CC 2014 version works perfectly.
For reference the video file is a .avi with Xvid compression and sound is a .wav. These have always been used exactly the same with CC in 2014 without problem.
Computer:
8.1 - fully updated for Windows
NVIDIA GTX 780 video card
32 GB of ram
3770K i7 processor
All Nvidia drivers are also updated.
I also ran a full virus and malware scan just in case for some strange reason, that was at fault, and I ran into zero issues. Media Encoder, Photoshop, and Illustrator CC 2015 that all seem to work great.
I am quite technically savvy and this one left me speechless, that really stinks that I was looking forward to the potential improvements to speed updates. That's life.
Matt Borchert wrote:
Nothing seems to be enabled. The CAD is what is selected in CC 2015 as shown in the image above. It is the only available thing to choose, and I can't select None or disable.
Thank you. In 2015, CC, you can click on the settings... button in the Audio hardware preferences. Then in the record of the OS dialog box tab, you can disable manually (for example, right-click and choose the appropriate option) the SPDIF input. It is only a temporary workaround until get out us a patch with a fix, but let me know if it works for you.
-
Will be the first evidence of fusion audio and video clips so that I can then change them as a clip?
richardb
So that we keep in sync, I just wanted to clarify something... it is, your question is not out of sync audio before or after export. Ask not how to synchronize audio in Premiere Elements. Using the tools of Premiere Elements, you have been able to successfully replace the sound of the iPad with another audio source and synchronize the new audio source to component video without much trouble with Premiere Elements. I think that is correct based on what you wrote
I found that I can synchronize the two audios and then delete one of the iPad and then link other audio and video. It seems that I can then edit the video and keep the linked video and audio.
What did you use as your tools of Premiere Elements for the audio synchronization - Alt and arrow key (left or right) faucet to shift the audio 1 frame left or right or the SHIFT + ALT and arrow (left or right) tap to push 5 audio images left or right? These are details of Windows... for your Mac, did you use Option Alt and shift + Option for Shift + Alt? I'm strictly a Windows of the elements user.
I hope that your future posts will clarify the following to make sure that we are clear about what your goals and make sure you have the information you need to work on your project.
Is there a reason why you couldn't do all in a project and an export - create your Timeline with iPad video and audio special for it but also make additions to the project timeline prior to export of this timeline to a final product of Premiere Elements?
If everything goes well and there is no problem that you have not mentioned, I would try to avoid re-encoding involved in the export and import of export in another project where the only issue is another exporting.
Please consider.
Looking forward to hear your progress as your schedule allows.
RTA
-
Unlink the Audio and video in gray in the first 13 items (Windows 8.1) [new user]
I posted (or at least I thought the post worked) this Mar.27th question, but I can not find it or that the answers I have gotten so if anyone knows his comings and goings, I would appreciate you tell me how to see while I have 2 threads running for the same question. My question is: why is the ability to separate audio and video tracks greyed when I am trying to replace the part of an audio clip (without ruining the synchronization between audio and video existing). I work with a saved file "projectX.prel". I noticed when I opened a new project that the option to break the LINK is active. This seems contrary logic is to say action to break the link would be more likely to be needed when you are working on an existing file as opposed to when you are working on a new file? How can we separate the 2 components (audio & video) so I can just edit the audio clip without the work of procedure to break the LINK? Would appreciate any help anyone can offer with the foregoing. Thank you.
garryw
First broadcast 13 elements 8.1 on windows 64-bit. Have you updated to the 13 to 13.1 yet? If this isn't the case, please do so using Help Menu/updates to date of an open project.
But for the immediate question...
I don't see any sign of a previous post you so I'm not sure what happened to your prior shipment.
When you import a file that contains the video and audio, they come into Premiere Elements project related - party video presenting the
Video of track 1 and the audio portion on the Audio 1 track.
If you want to unlink the audio of the video
a. Select/highlight the chronology of the record and go to video Menu/unlink Audio and video and click it. It does not work.
or
b. right click on the file of chronology, and in the drop-down menu, find and click on remove the Audio and video link.
or
c. hold down the ALT of the main keyboard to the computer and click drag the audio from the video.
Please consult the bulletin and review, and then let us know the result.
If any questions or need any clarification, do not hesitate to ask.
Thank you.
RTA
Maybe you are looking for
-
iPad says inaccessible start advice
ematic ipad said accessible boot device
-
Satellite L555-110 - cannot install the Eco on Windows 7 utility
Hey everybody, I can't install the utility on Windows 7 Professional 64 bit Eco. After loading the files, the installation routine stops and says no "supported BIOS". I use the latest version of the Eco (v1.1.11.64) and BIOS (v1.70) utility.Additiona
-
Pavilion AMD mainboard: adding usb 3.0 to Narra3(M2N68-LA) mainboard
My card mother Pavilion had bad Caps top, so I replaced it with a Narra3 (M2N68 - LA) of Pegatron. It has 2 slots PCIeX1 open. Can I add a USB 3.0 card? (I can't tell if the slots are version 1 or 2 PCIe. Can find no indication on the card and no inf
-
Need product key 25 character for the Dungeon Siege game
I bought Dungeon Siege about 6 years ago. Since then, I've lost the case and all the Info for the loading of the game. I bought a new computer recently and when I try to load my game it asks a 25-character product number. Anyone know where I can get
-
sanhq 2.6 incorrect version number display?
I've updated our 2.5 to 2.6 sanhq yesterday.But when I run sanhq it's to show the version of the server: 2.5.2000.6748 (in the screen and help on) But I do not see the new features. (monitor of political reliability of raid) Is this a known issue?