Audio bass after burning!
Hello
My audio (narration, music, and audio clip) the sound is OK on the project, but too low when I burn. It is fair when I turn the volume upward very high on TV so I hope it will be OK.
I had a few 'debug event' and 'encountered error' messages pop up in the last stages so something must have gone wrong, but I'm a little more it!.
After burning also, only 2/3 of the disc is used to burn a project of 50 minutes. Must not be burned to fit to disc (adjustment of the drive box is highlighted), but it was 16 x? I'll try burning slower to see if that makes a difference.
Should I use DVD-R or + R and I need a x 2 disc to burn at 2 x? I have only 16 x discs atm.
Thank you.
P. S.
I was looking through discussions and found the settings of your audio below hunting. (have not worked out how to copy and paste the fron PE7 mine yet!)
But my refs of synchronization are different.
The Direct Sound Output Port Sync ref is YES
" Input " " is NO
Could this be the prob with my low after burning - sound is well in the project, although I had to increase levels and I have a slight distortion in the narrative - but hey I re - do entire project 50 min. definitely!
Thank you.
Rather than use the Panel Audio Mixer to raise your volume level, go to the audio track of the narration on your timeline and manually raise the yellow level line by dragging it to the top. If the mixer Audio Panel has added a large number of keyframes for this track, you must remove them manually.
Bézier means two different things, depending on whether you're talking about spatial or temporal keyframe interpolation. But, basically, it's a way to take a straight line and make a curved line.
So many questions that ask you is answered in my books, méjan. Have you thought about ordering a copy?
Tags: Premiere
Similar Questions
-
Audio popping after burning blu - ray in 5.1
Just as a warning, I'm relatively new to Adobe Premiere and I'm under first Elements 8 on a Sony Vaio with a processor of Intel Core i5 - 580 M, GPU ATI Mobility Radeon HD 5650, 8 GB DDR3 - SDRAM - 1066 and Windows 7 Home Premium 64 - bit.
I'm trying to create discs blu - ray full HD and 5.1 surround sound. Video source is full HD 1920 x 1080 with. Extension M2TS. When I have Adobe Premiere Elements 8 check the properties for my videos, it says the audio format of the source is "48, 000Hz - compressed - 6 channels" and the audio format of the project is '48, 000Hz - 32 bit floating point - 6 channels. This is despite the fact that the source is 5.1. However what edition of videos "5.1" appears next to the audio 1 on the timeline. I read something on this issue, and I guess that it is not the cause of any audio bad after an engraving of blu - ray.
I create new projects using these settings:
NTSC-AVCHD-Full HD 1080i 30 5.1 channels
After a few quick changes I burn a disc blu - ray with 1920x1080i THAT NTSC Dolby H.264 preset. When checking of the combustion quality video looks great but audio has a distinct bursting or cracking sometimes that isn't in the file source at all. Someone has any ideas why a burn causes these audio imperfections appear? I've never had problems with burns from channel 2 and I'll probably just end up sticking with 2 audio channels, if a solution cannot be found. Note, the audio output is also much lower than the burned copy when read from the source file. This occurs even when the volume of the clip is set to the max of + 6.0dB. Thanks for any help.
First of all, the pre can't burn, or the share of the export/DD 5.1 SS Audio. PrPro even needs additional Minnetonka Audio SurCode 5.1 DD SS pluginto export this Audio stream. Pre can work with DD 5.1 SS in many project Presets, but will need mixer 2 channel for export, or to burn.
Now, when we make cuts on the Audio files and the ends upwards, and cuts do not run from "zero crossing", you can pop or big ticks. It's the lack of continuity in the Audio waveform - not at zero crossings. Usually, these reductions based on crossing zero setting will eliminate the POPs and clicks.
Good luck
Hunt
-
Too high bass after burning CDs with Windows Media Player 12
When burning the CD on WMP the bass is medium to high. I noticed happens that on some CD burning, but the amplification of the bass is very noticeable. Even if I turn down the bass on my player it still sounds weird. There is a sort of change in equalization going on during the burning process. When this happens on a CD, it affects ALL the songs on it. Then I will burn another mix CD and the same exact song will not have the bass amplification. Is it possible to prevent this? It might have something to do with the characteristic sound of leveling? Or maybe the burning speed?
I record on CD - R discs. It does not do anything on MP3 or Audio on the disc, just CD - R. I noticed this on my car player CD system.
Audio/mp3 is how to actually burn the disc... Audio discs are similar to a cd... upto 80 minutes in length classical music, but many modern readers will also play cds that have MP3s on them.
If you want to re - rip to wma lossless format just make sure that you copy protect them. (under settings "rip music" in the options of wmp)... come back to me, if you need more advice. Best - R.
-
CD error after burning of 2 or 4 songs
After burning the 2-4 songs in Windows Media Player, I get error messages that windows can't burn CDs, check if the cd is dirty when it allows to work properly
The following links may be worth a visit:
(982116) your CD or DVD drive is missing
or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
(Windows XP / Windows Vista / Windows 7)Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problemsAlso I have seen reports that the use of a technology mobile broadband
device such as a USB Dongle can cause problems...See the following link:
Dongle Internet cache burner
http://www.windowsdvdmaker.com/forums/thread/1905.aspxJust experimental title the following freeware can
be worth a try:(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)CDBurnerXP
http://CDBurnerXP.se/
(works on XP - Vista - 7)CDBurnerXP tutorial
Create Audio discs
http://CDBurnerXP.se/help/audio/compileaudioCDBurnerXP tutorial
Create an MP3 disc
http://CDBurnerXP.se/help/audio/mp3cdCDBurnerXP tutorial
Create the data disc
http://CDBurnerXP.se/help/data/compiledata -
HP 15: Audio distorted after upgrade to Windows 10 Anniversary Edition
Hey everybody,
I just upgraded my laptop HP15 for Windows 10 Anniversary Edition. Now, I have distorted audio, is there something I can do to fix that?
Thank you
Bill
After the upgrade to the anniversary edition the first thing I recommend is to update your drivers and software via Windows Update and HP Support Assistant.
For some specific models of HP, there may be difficulties with audio destortion after update of the anniversary. Please see the following support document to see if your model in the series is in the list and the instructions to follow.
Computers laptops HP 15 - xxxxx, 15g - xxxxx and 15 q - xxxxx - Audio is distorted when music or videos are played
-
Temporary files lost after burn error
Help me!
I had chosen a whole bunch of files that I wanted to burn to disc. The burn process has failed and I had a few options - one of them being "save temporary files to burn later. I chose this, but now my files are gone? HELP!!!!!!!!!!!!!!!!!!!(Original title - LOST TEMP FILES AFTER BURN ERROR?)Hello
1. what application you use to burn the file?
2. are you able to see the original on the computer file?
3. What is the accurate and complete error message that appears on the computer?Select another file to the computer and then try to recreate the task and check.
See the link for help:
Burn a CD or DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD -
I've been downloading movies and burn them on DVD for awhile. Recently, after burning them and play them on a DVD DVIX player, they stop with 30 minutes left film and light up in the next movie on the disc. When played on my computer via Windows Media throughout the film is there but not sound.
Anyone have any ideas?
If the movie file is complete... I don't know why the Divx player
would fail to play to the end. Have you tried burning one
file on a DVD just to see if he could play all the way to the end?DivX player is also compatible Xvid? You can use the
utility to determine if your videos are free Xvid:You don't have to install it... just unzip the file and
GSpot.exe left click to launch.GSpot Super quick start
http://www.headbands.com/GSpot/v26x/Quick_Start.htmlEvaluation of video files and Codecs with GSpot
http://www.windowsmoviemakers.NET/PapaJohn/68/GSpot.aspxAs for the sound issue on your computer... maybe you need
an AC3 Filter and also you have the Xvid codec.(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)AC3 Filter
http://AC3Filter.NET/wiki/projects/AC3Filter/releases
(tests - AC3Filter 1.63 full b)XviD Codec
http://www.xvidmovies.com/codec/XviD FAQ
http://www.xvidmovies.com/FAQ/ -
How to record the sound of reverb to an audio cd and burn
record sound from reverb to an audio cd and burn
trying to burn a music cd and adding sound reverberation.
Hi LuisBardales,
There are some third-party programs that could help you record the reverb sound.
You, your favorite to find out what search engine program would help you in the task.
Important: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
-
Latitude E5520 Audio problems after upgrade to win 10
I have audio problems after upgrade to win 10 64-bit.
Dell Latitude E5520 IDT 92HDxxx HD Audio
Hardware ID:
HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A & REV_1001
HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A(1) if I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").
(2) if I use the latest Dell driver (IDT 92HDxxx HD Audio Driver) I hear initially via speakers, but as soon as I plug in headphones I can't switch back to the speakers (i.e. switching between the speakers and the headphones does not work) and my laptop computer microphone works.
I would be happy to provide more information and help to debug.
To a Microsoft Community Forum, I received the following reply from Rob Brown - Microsoft MVP:
*************************************************************************
Hello
AS OEM Dell is responsible for the good operation of the equipment both
and Windows. Check their documentation online with Dell Support, and
drivers and ask questions in the forums about known problems. Make sure that you are
Run the latest version of the BIOS, chipset and drivers.
I hope this helps.
*************************************************************************I understand that the Latitude E5520 does not appear on the Dell "Computers tested for upgrade to Windows 10" list... However I was hoping maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?
Thank you
John D.johnsdaggAS OEM Dell is responsible for the good operation of the equipment both
and Windows.Hi, John. It's quite nervous of a member of the MS forum say that Dell is responsible to operate Windows. It wasn't Dell but MS who claims that Win10 has most of the necessary drivers and if not then the drivers Win7 and Win8.1 would work.
johnsdaggI was hoping that maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?I doubt that it is possible for two reasons. Dell went from IDT Realtek as the audio seller so probably not more a a contract with IDT, if IDT even exist anymore. A year ago IDT was acquired by another company. I do not know its current status, but it is sure that the acquiring company will not be upgrading old software IDT. Reference Dell itself does not write the audio drivers. Even when IDT was the seller I believe that Win7 drivers are the final versions - no version 8 or 8.1 I think.
johnsdaggIf I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").The native Windows audio driver can't stand struggling external mic. It is a MS 'known problem '. MS must implement a decision-making support, but there is no indication that it will be. Meanwhile, you have two workaround solutions. You can switch backwards between the natives and the IDT drivers. At some point Win10 could leave the IDT driver works correctly. Or get an outlet cheap usb audio to the microphone. Struggling running out-audio driver usb Windows native usb and so dependent no driver IDT.
-
I have Windows 7 Media Player and that you want to know why, after burning an album of my playlist it records, but there is no sound in playback of the CD, that I taped?
HI - what device you are playing it back on?
-
What happens to the audio cd after the cda file are converted to mp3 format? Only the original cd remains unchanged?
She remains totally unchanged, regardless of how many times it is loaded in the computer.
-
Windows 7 freezes after burning a compact flash and priming.
Title of the Moose: the Compact Flash detection once started on any system using a specific application on Windows 7
Hi, I burned a compact flash tool & after burning, I used this compact flash for the start-up of a machine that uses only this compact flash. Once the machine is started, I am again connected this compact flash using card reader for windows 7 but now windows 7 is getting hanged and I am not able to see the drive in the compauter.
Hello Gyan Singh, b.
Welcome to the community Microsoft and thanks for posting the question.
According to the description provided, it looks like you are having problems with Windows 7 suspension after burning a compact flash and priming.
I need to ask you some questions to help you better.
1. What tools did you use to burn the compact flash?
2. What is the brand and model of the card reader?Reply with answers to help you best.
-
The After Effects team are investigating a bug in after effects CC 2104 (13.0) where a memory leak during audio cleanup (hold CTRL or command all rubbing). This leak memory can possibly consume RAM everything is free, which can cause the warning message "after effects error: Preview RAM 2 or more images for reading needs" when you try to open a RAM Preview.
While we look at this problem, you can prevent the leakage of bug and memory is not a cleaning with audio. In case of problems you can solve it by closing and restarting After Effects.
Note that this bug is listed as fixed in the next update:
-
I downloaded a video file. I played it in several media players like windows media player and divx player, that it is in English. I then open windows dvd creation to burn it to dvd. After its burned, I open it to try and it replays in a foreign language. How this happens, or why what happened?
I downloaded a video file. I played it in several media players like windows media player and divx player, that it is in English. I then open windows dvd creation to burn it to dvd. After its burned, I open it to try and it replays in a foreign language. How this happens, or why what happened?
==============================
Apparently the movie file has two audio tracks.The following link might be worth a visit:
Dual audio AVI AVI audio single.
http://www.videohelp.com/Forum/Archive/dual-audio-AVI-to-singl-audio-AVI-t309959.htmlJohn Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Background video appears black after burning.
Hello
I added a video to one of my blank menus. In the preview, that it appears correctly. But after that I burned to the Bluray, I could hear the audio only. The .m2v file in my project folder again is all black, too. So I tried the same thing in a dvd-projekt again and everything worked fine. The rendered file .m2y is quite correct. Why again does not make my backgroundvideo wright in a projekt dvd but bad in a projekt bluray?
Thanks for your answers,
Junk.Box
I just found the problem. I didn't have other buttons in my animated menu, so never, I added a. Now, I added just one button and my motion menu made very well. Maybe a bug still-bluray-projekt.
in any case, thank you very much
Maybe you are looking for
-
Remember all safari navigation history
I tried to find a page I was surfing on two days ago, but could not find. So I checked my story but I knew my story starts from March 30. I want to put it so that it remembers the recent history. Help, please.
-
Skype closes immediately after opening.
I had this problem for awhile now. I have looked through various other positions who have had this problem and problems similar to him. The only solution that worked for me was using an old version of Skype (6.16, if I'm not mistaken). I'm on Windows
-
Hey everybody, Currently, I'm reading in 4 channels of I and 1 AO output signal. For my application, the calendar of area of OCCUPANCY for the AI is of importance. To be sure, I would record the AO output signal. Is it possible to record this signal
-
Windows Vista - all of a sudden, my desktop screen and its content are on the side... That's happened?
-
Drive replacement hard Compaq CQ58-205SL
Hi all In the last few weeks my PC started to show an error message during boot saying: "SMART hard drive check failure: imminent failure" or something similar. In any case I have already concluded that the only way I have to solve this problem is to