Audio popping after burning blu - ray in 5.1

Similar Questions

• HP Pavilion Elite HPE - 480t computer and burner blu - ray 12 x HP bd 340i

  Model bd340i in the middle of last year, I bought HP 12 x Blu - Ray burner. When I bought my HP Office in December 2010 model HP Pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc.

  I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.

  At this point, I don't know if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on DVD but not blu - ray, DVD plays fine but can't play or burn blu - ray discs.

  Could this laser blu - ray crapped out and the dvd reading and writing laser still works?  Must a blu ray burner still lasers for both media (DVD and Blu Ray)?

  Everything else with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.

  When did you purchase your product? : December2010
  Product HP Pavilion Elite HPE - 480t CTO desktop PC
  Select a problem area: other
  What is your serial number (SN): [personal information deleted]
  What is your operating system? : Microsoft Windows 7 Home Premium 64
  Your computer is unable to work with Accessories products? Please select all the boxes. other
  What type and brand of CD/DVD media you are using? Kodak 25gig of Bu-Ray and dvd HP
  The CD/DVD writer burner was built in the computer when you bought it? NO.
  You hear the sound from the speakers connected?
  The display on the product seems to work correctly? Yes
  Have you connected the product to your TV, DVD player or a music system? NO.

  If there is an error message, please specify: cannot read media
  Description of the problem: I bought burner HP 12 Blu - Ray model bd340i in the middle of last year. When I bought my HP Office in December 2010 model HP pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc. I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.
  Please provide previous steps of troubleshooting, or information that can help HP help you. : I don't know at this point if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on the DVD but not blu - ray, DVD plays very well, but can not play blu - ray.
  Nothing changed since the device was working properly (installation of SW, settings, wiring, etc.): everything with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.
  How would you describe your level of technical skill? : intermediate
  First name Peter
  Name, first name rider
  [Personal information]

  Arcticwolf, sorry, I miss read your post details. That strangely resembles a failed drive. Try unistalling and reinstalling the drive, including the software and driver. If a problem has occurred, it may fix.

• First 14 will burn DVD but won't burn Blu Ray. On the same computer 11 first has no problem burning DVD or Blu Ray. Issue. Why dooes 14 does not. What can I do

  Can anyone help on why my first charge up to 14 will not burn Blu Ray but will burn DVD still 11 first on the same computer has no problems burning Blu Ray or DVD. ? Thank you. RB

  What operating system do you use?

  What brand of computer are you using (HP, Dell, etc.)? Have you spent at the web site of the manufacturer and installed the drivers from HP, Dell, support of any web site page? Sometimes drivers that Windows installs are not as effective - especially if you have recently upgraded to Windows 10.

  There may be other factors, but we will need a lot more information in order to solve the deeper problems.

• PRE9 - to burn Blu - Ray file available?

  Burning Blu - Ray in the record has been added to PRE9?

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

  Unfortunately, no, Neale.

• audio cd playback on blu - ray player

  I have a Sony BDP Blu ray player BX320 and looking to play audio CDs.  The Blu - ray player is connected to a sound bar Vizio via HDMI connections at each end and all works well, both dvd and cd audio.

  The problem is that I'm also enjoying my Bose sound with speakers system in several rooms.  It is connected via a receiver of Techniques very old with only the rca inputs.

  So finally, I would like to read my DVDs through the current installation and audio CDs through the receiver of Techniques to the Bose speakers.  The problem is that the receiver Techniques accepts only the rca inputs.

  I tried to connect the Blu - ray player to the receiver via the digital coaxial Techniques using a digital audio coaxial cable to a double (female RCA to RCA male) separator to the receiver - with the TV/soundbar in the wide receiver.  But it does not work.

  Is it possible to make these connections?

  Technical salute!

  It will work not only with the help of a separator, because you're dealing with analog and digital signals. In this case, you will need an analog converter instead of just a digital splitter. However, Sony does not guarantee complete compatibility/functionality of the use of converters/dispatchers of part 3.

  If you have a TV with HDMI input and output audio RCA, you can also connect your Sony Blu - ray player to your TV via HDMI and audio system via the audio output RCA on the TV without needing the converter/splitter. Then put the audio from your TV on external speakers.

  If my post answered your question, please mark it as "accept as a Solution.

  Thank you

  -Anthony

• I have burn blue ray but audio is not

  I have send to compressor and audio video is here, burn a blue ray dvd and there is no audio data

  Did you include the Dolby Digital parameter in addition to H.264 implementation when you applied in the compressor?

  Russ

• Error 'Could not create ac3' when burning Blu - ray

  I spent the last week, a reader Blu - ray in Encore CS5 design.  Combustion, they gave me the error message "Cannot create"_sessionfiles_Dsf_session_1_audio.ac3", and the burn failed (after going to seven hours).  I don't really know even where to start with this.  The Blu - ray is about 80% of the full (20 GB) and includes several chronologies and several menus (including audio).  No pop ups.  It should be a fairly simple project.  However, it gave me problems after the problem and has taken far too long.  Can anyone offer insight before I spend another week chasing the problem?  Thank you.

  Congratulations and condolences then!

  Either the burn was bad (the inability to check), in which case a reburn could fix, or you have a navigation problem, in which case you will need to fix this.

  You can navigate through the menu of the specific aspects? The action of the end of the scenario for the main movie is clearly defined in the menu special functions? In preview, but still on the main timeline, click the icon for "end action"; that works correctly?

  You can also try to play the image, and see if it behaves correctly (again showing a bad burn). The problem with this is that a) have you usually mount the image and b) some software players emulate correctly and a failure doesn't mean much. But if it plays properly, it indicates a bad burn.

  What third-party burning software has failed?

• Problems burner Blu - Ray (HL-DT-ST BDDVDRW GGC-H20L)

  I'm REALLY frustrated!

  My Pavilion d4999t-2 came with a disk drive BluRay & lightscribe (HL-DT-ST BDDVDRW GGC-H20L) I've used for the past two years... then 2 weeks ago the laser that burns CD - R & grilled LightScribe.  Fortunately (I thought), I got the extended warranty, so I contacted Hp.

  After going through the troubleshooting steps, I convinced that the CD-R/LightScribe laser has been burned, and he sent me a replacement (#1).

  When I installed the replacement drive, everything works perfectly, except it would not write BD - R (recordable BluRay) discs.  He would not even acknowledge that a BD - R was even inserted in the drive.

  Thus, after several "Troubleshooting" with assistance from Hp, they shipped another replacement (#2).  When I installed it, it could read AS CD & CD - R discs only!  He doesn't even have any disc BluRay or DVD was even inserted in the drive.

  Troubleshooting more (during which, according to their instructions, I lost all access to the command) and they ship me another replacement (#3).  This is the same as the first.... It can read/write CD and DVD and it will read a BluRay disc, but it does not recognize BD - R disc when inserted!

  After 2 weeks and 3-disc replacement, I am not officially frustrated!

  Of course, that are given to nine drives (the 'new' date I received is in Nov 2007), it seems that one who is to repair those disks does not a very good job!

  Has anyone else had similar problems with BluRay burner or get a replacement from Hp work?

  Mystery is solved

  It turned out that hp had the incorrect part description in their catalog of replacement

  All this time, they were send me Blu - Ray, not engravers READERS!

  After spending a few hours with a technician (Arkansas fortunately - I don't have to deal with an Indian accent most read a script), she shot to the top of my original and verified system control the original drive.  After comparison with the disc I had received, she found the error and put in a change order to get the fixed catalog.  I hope that nobody else will have to go through the problems that I had.

  Now a happy camper again

• Still crashes when burning blu ray to disk image

  I created a disk image of 15,88 GB blu ray and with success (after several tries) burned a nice blu ray player, then when I try to burn another disc by importing the disk image, the grip of the software after burning several hundred MB, making the disc useless, and I have to force leave again to escape.  Advice in why I get this conflict?

  Switched to Toast for burning.  Thanks for your help Stan.

• Still ignores recent changes created when burning Blu - Ray

  Hi everyone-

  When I change the detailed underlying film Premiere project file pieces, I take care of to save.

  At the opening, still, I'm going to project window (top left label) then highlight the relevant first project File.pproj, and then click on revert to the Original.

  When I burn a DVD, yet many transcoding etc perhaps spending an hour on this (an hour on DVD hardware) before starting to write.  So, he burns the latest version of the Premiere project file.

  BUT when I burn a Blu - Ray disc, still seems to "remember" the previous version of the project file underlying first, doesn't bother to do many transcoding, etc. and after a maximum of 5 minutes he began to write the disc - which then the precedent not the latest version of the first underlying project file.

  (Either by the way, I'm in CS5 and Windows 7 and did not have problems of major software so far.)

  I understand that if I start a new project from scratch, it will be important to the latest version of the Premiere project file and I did it with success on another project where the menu is so simple to recreate it is not a problem.

  However, on THIS project, I have a complicated menu, giving access to a long (with a submenu preselection of stage) and three film projects short first and so begin a new reminder of the project file and build a whole new menu with scene selections would be a lot of hassle, that I would rather.  Simply copy the project still would probably just in me the problem of the copy.

  Anyone got any ideas?

  Thank you very much

  Jan

  To make comic books, you must change the project type to BD. the build type, Yes?

  When you see in the comic book the type of transcode is transcoded, it means that you have not restored. Change the type of project in BD, then return to this asset.

• Audio bass after burning!

  Hello

  My audio (narration, music, and audio clip) the sound is OK on the project, but too low when I burn. It is fair when I turn the volume upward very high on TV so I hope it will be OK.

  I had a few 'debug event' and 'encountered error' messages pop up in the last stages so something must have gone wrong, but I'm a little more it!.

  After burning also, only 2/3 of the disc is used to burn a project of 50 minutes. Must not be burned to fit to disc (adjustment of the drive box is highlighted), but it was 16 x? I'll try burning slower to see if that makes a difference.

  Should I use DVD-R or + R and I need a x 2 disc to burn at 2 x? I have only 16 x discs atm.

  Thank you.

  P. S.

  I was looking through discussions and found the settings of your audio below hunting. (have not worked out how to copy and paste the fron PE7 mine yet!)

  But my refs of synchronization are different.

  The Direct Sound Output Port Sync ref is YES

  "          Input    "             "    is  NO

  Could this be the prob with my low after burning - sound is well in the project, although I had to increase levels and I have a slight distortion in the narrative - but hey I re - do entire project 50 min. definitely!

  Thank you.

  

  Rather than use the Panel Audio Mixer to raise your volume level, go to the audio track of the narration on your timeline and manually raise the yellow level line by dragging it to the top. If the mixer Audio Panel has added a large number of keyframes for this track, you must remove them manually.

  Bézier means two different things, depending on whether you're talking about spatial or temporal keyframe interpolation. But, basically, it's a way to take a straight line and make a curved line.

  So many questions that ask you is answered in my books, méjan. Have you thought about ordering a copy?

• Qosmio F60 - error when burning Blu - ray discs

  I have a Qosmio F60

  Recently, I tried to burn my data on BD - R 25 gb disc. Aftre burn about 6 GB of data, it stopped burning with unexplained error. I tried another disc with the same problem. This time the suggested message updated firmware. This is MY * A BD - MLT uj240ES blue ray player. I am unable to find any updated firmware update. Current firmware is version 1.10.

  Can someone help me on this

  Hey,.

  If a firmware update is available, you can find it on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com

  If this isn't the case, you already have the latest version of the firmware.

  In your case, I recommend to test different brands of blu - ray discs. I have good experiences with Verbatim and TDK discs.
  Check this box!

  By the way: I prefer a backup of the data on an external HARD drive. It of safer and easier! ;)

• P900 and burner Blu - ray 45K 1675

  I'm considering adding the Blu - ray burner 45K 1675 Lenovo to my P900 workstation. Lists compatibility for the burner, however, don't mention any of the P-series workstations. It should be standard optical SATA device, but just to make sure - is there a reason why it might not work/adjustment on the P900?

  Site Web: Lenovo's mentions that the burner is delivered with burning/reading software. Could you confirm that it is still the case. Or is the software for download?

  Edit: while I'm... Is there maybe a Lenovo slim Blu - ray burner option that would work in the adapter in the modular Bay, next to the MCR 29-in-1? There used to be a feature of Blu - ray slim SATA for ThinkPads, but I'm not quite sure it is compatible.

  Yes, K 45, 1675 will work. Front bays are tool-free and will allow this player to drop in without anything else required except another SATA cable.

  If you already have the modular Bay ODD/MCR, you can pick up a Blu - Ray drive ultra slim LG CU20N. This model has a short scope and must match instead of the original 9.5 mm ODD. ODD choice is important because some readers of 9.5 mm have dials senior and some short. There could be others that match, but the CU20N is used an OEM drive for a large number of sellers.

  I'm not aware of a Lenovo 9.5 mm BDR that would work unless you are ready to use a portable device and swap the bevels. Most of the ThinkPad readers have custom dials and none of ThinkServers I know options BDR.

• HP Pavilion Slimline s5623w - try to find a burner blu ray with hook in case of ejection

  I want to upgrade my optical drive to a blu ray burner and the problem is that the 5.25 Bay is not visible on this model of hp. It is mounted vertically behind a grid and the actual eject disk button is not accessible. Is there a button on the case itself to open and close the drive that is controlled by a small wire connecting from the button on the case of a small port at the back of the current drive.

  I looked through pictures of every single blu ray burner on the market and it seems that not a single one has this feature.

  I'm not a perfectionist, but inconsistencies upset me and that just asking the question... Why this didn't think? I even checked real HP burners-blu ray thinking of course what they would think of this small but important feature... but no luck.

  If someone knows any of this a blu ray burner please inform me! I just wouldn't be able to bear have a button that does not work and have to use myComputer to open the tray!

  Hello

  I believe that the HP Slimline s5280t has the BD-R/W drive you want.  The Remove/replace instructions made reference the reader perspective ejection of the connector.  Watch the video.

  HP Partsurfer displays a part number for the cartoonist.  Yikes - It is listed at $282,09

  Try Amazon for the writer of comics from HP. It is $ 108

• Burner Blu Ray for XPS 8700

  I recently purchased an 8700 XPS.  It is equipped with a Blu Ray player driver, and I couldn't customize my to get a Blu Ray burner.  So now I'm ready to buy an internal Blu-Ray burner to add to my system.

  I saw a Poineer unit that seems to be very high-spec - fast, with the latest features. The rate is $ 110 (USD).

  Reference Dell has an offering that I should?

  Hi ColinM_Campbell,

  Internal Blu - ray players that will fit in the 5.25 inch bays can be used with Dell XPS 8700. You try to call the team of spare parts for 18003723355 (US only) to check the options available for readers.