Audio does not add a sequence (mts files)

Similar Questions

• Audio does not appear in my AVCHD files

  I'm evaluating Adobe Premier free trial to see if it will be suitable for the mounting of my AVCHD files from a consumer video camera. The files include a band 5.1 sound. When I import in the first, the sound is not found - first treats them as if they have no soundtrack. I don't have this problem with, for example, avi files, and my files have no doubt sound as I hear it in Windows Media Player.

  In fact, it is said that the AVCHD files are not supported in the trial version. Could be my problem? I am not sure because the video component appears to be present can be used. I want to be sure of that, because I really want to buy the program and then discover that they still do not work.

  Thanks for any help!

  See you soon,.

  Ben

  Ben,

  It is because of the AC3 Audio, which is closer to MPEG-2 - the missing element in the trial.

  One option is that the fully-paid version has a 30 day warranty, refund. Try the full version and if you don't like it, return it to Adobe for 100% of your back $.

  Good luck

  Hunt

• Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording.

  Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording. I used to be able to play any video or audio file in any site!

  Hello

  Try resetting the default associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  If necessary:

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  ====================================

  Also follow these steps:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------

  Then, if necessary:

  Have you recently installed another player?

  Reset your associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  ---------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  --------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? You added another
  reader recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html

  I hope this helps.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it's not

  Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it does not appear or play on the timeline. I can drag an audio file of Ms on the timeline, but I need audio from my original file to synchronize my audio file recorded independently - used to be no problem... any ideas what I can not edit now?

  Hi Neil,

  Drag / drop may not work if you don't have any enabl; e source patch or did not target the track for the same thing.

  https://helpx.Adobe.com/Premiere-Pro/using/source-patching-track-targetting.html

  Vinay

• XJ437PA #ACJ: Pavilion DV6 - Audio does not

  Hello

  The audio has stopped working in my laptop since these days. It started with the audio does not not intermittently, but he has completely stopped working. I shared my PC specs below:

  Product name: HP Pavilion dv6 Notebook PC
  Product number: XJ437PA #ACJ

  Processor name: Intel (r) Core i3 CPU M 370 @ 2.40 GHz (2 400 MHz)

  I went through this forum and tried a few things:

  (1) to reinstall the codec IDT high definition

  (2) using the file available in the Recovery Manager

  (3) using the MicrosoftFixit

  But the problem is not yet solved.

  Can you please provide some suggestions?

  Thank you

  David

  Hi David,

  I would suggest you try a slight variation on the first two methods.
  
  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp47001-47500/sp47393.exe
  
  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.

  Right-click on the Audio display Intel entry and select uninstall - this time check the confirmation box to remove the driver and continue the uninstall.

  Then, right-click on the IDT device and select uninstall - for this entry, also check the box confirmation to remove the driver and uninstalling.

  Once completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation. Once done, restart the laptop.

  Any improvement?

  Best regards

  DP - K

• RealPlayer does not open due to missing file MSVCP90.dll

  I try to open realplayer and every time I get the same error message: Realplayer does not open due to missing file MSVCP90.dll. I tried to uninstall and reinstall a clean version and it's the same result every time! What I am doing wrong? How can I solve this problem? I have a laptop HP 1030NR which uses xp edition sp3 family. Can anyone offer any suggestions?

  The problem is that RealPlayer needs pieces of Visual Studio/Visual C++ libraries and that is not finding them on your system.  You do not have to install all this junk - just distribution (like MSVCP90.dll) files.

  You can look in Add/Remove programs and see what Microsoft Visual C++ redistributes you have installed right now (you can have none).  I installed them in 2005.  You may have none or more installed.

  I would like to download the latest Package Microsoft Visual C++ 2010 redistributable and install it from here:

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=5555

  Reboot and see if RealPlayer is happy now.

• Why aac audio does not work in PowerProducer Windows Vista 32-bit?

  My friend has a Blu - Ray burner that is packed with PowerProducer 5. They have installed on their PC 32-bit of Windows Vista. Its HD files AAC audio camera mp4 video. The audio does not work in the environment creation of PP, or burned discs. I downloaded all the codecs. The audio works fine in WMP and QT, as well as in Windows Movie Maker. Installed the same software on my Windows 7 computer and audio works very well.

  I have contacted Cyberlink, makers of PowerProducer, and they said that the limited packaged version of the software does not support the AAC. They suggested that upgrade to the full version for $50. Obviously, I'm not quite confident in this response.
  Someone has an idea of what might be past or have suggestions of what to try to fix the error?

  Hi ClintWatson,

  Because the problem is specific to this particular application, I suggest you to contact CyberLink support for better support.
  http://Forum.CyberLink.com/Forum/forums/show/3.page

• Dell Latitude D610 Audio does not

  My Dell Latitude D610 has had trouble with its audio. It had Windows XP but I just download Windows 7 above. And since I downloaded it, the HiFi/audio icon has an X on it. When I troublshoot it then it comes up saying "material changes may not have been detected.

  Please help me, it plays videos fine but the only problem its been giving me, it's that sound/audio does not work. The two ways, speaker and headphone, it does not work

  Hello. The D610 was an obsolete type of audio material on the motherboard called AC97. The current type is called HD audio. Windows 7 has a native driver for HD audio but does not have one for the old type AC97, so you must install the driver from a vendor. The seller is a company called Sigmatel, but that the company went bankrupt before Windows 7, so he has never written a driver for windows 7.

  What you have to do is download the driver Sigmatel audio, R99254. This driver works for 2000, XP & Vista32 and will work in 7 by installing using the Vista compatibility mode.

  Extract the files (unzip or decompress) but cancel the installation process. Go to drive hard for:
  c:\Dell\Drivers\R99254

  Find the setup.exe file and right-click on it. Select Properties. Find the Compatibility tab and select Vista. The driver should install after that.

• Problems with my sound doesn't play not even though the settings say that the audio does not work properly

  recently I went on vacation... sound computer works very well before I left. Came back, and now the sound does not work.  I checked all the settings and it says everything is working. I've done some research and there was only one window to come when I rebooted that says a file with the extension dll is not found.  So I restored by computer back to before I left on vacation, but still no sound.  No pop up with the dll is not found though.  I went in the "maintenance" section and found it seems to be a few questions audio below is the scheme which is the filler. Hope this is enough information for assistance.  said the task of event 20 116.  I have an ACER one with windows. the computer has HDMI dolby and realtek.

  -

  -

   

    20

    0

    4

    116

    0

    0 x 800000000000000

   

    3490

   

   

    Microsoft-Windows-Audio/PlaybackManager

    LorrainesPC

   

   

  -

    3

    48000

    fake

   

   

  Judy Hello,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand you have a problem with the sound does not work properly in the computer even if the settings say that the audio does not work properly.

  Certainly, I understand your concern and will try my best to help you.

  I appreciate all your efforts really to try to solve this problem.

  This issue would have intervened if the sound card has went wrong in the computer or audio drivers have been corrupted.

  I would suggest trying the following methods and check if that helps.

  Method 1:

  I suggest you to refer to the procedure described in the article below and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: The above article will help you identify and solve its current problems in Windows, including no sound from your speakers or headphones.

  Also try to install the latest drivers from the chipset in the system and check if it helps.

  If the problem persists, follow method 2

  Method 2:

  How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article explains how to run the tool (SFC.exe) System File Checkerto scan your system files and to repair the missing system or damaged files from Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Windows audio does not

  I looked on many forums and websites I have tried every thing and its still not working.my audio does not work there is a red X on the sound icon and when I click on it it happens something detection of problems, said one or several windows services do not work. I looked on the forums and he said to see if windows audio running I checked and it was not running. I checked to make sure that all the dependencies were running and they were. I checked my virus protector and re-enabled storage what I thought was audio windows (because someone on a forum says it worked) and it still doesn't work.  I also tried the thing of scan to prompt orders and for some reason, he didn't start the scan. I have not now what it takes can someone please help me.

  Is AVG, the antivirus installed?

  If so, other users have reported a similar problem recently and you could look at restore recent files that AVG can be quarantined, as shown in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-hardware/Windows-audio-cant-be-started-error-0x800706cc/2f3cffd7-62e3-4b18-a604-7c1438e6a04a

• Tablespace does not use a certain data file

  Hi all, I am new to Oracle DB. Reported by developer that storage space is full, and then I found that there are two data files associated with the storage space by checking dba_data_files. The first data file size is already full of 32GB, and the second is 8GB. However, it seems that the tablespace does not use the data file second when I check the free space of the tablespace because I cannot find its use. That's why Oracle DB shows ORA-01654 and tell me to add another data file. I fix this by adding another data file. But I'm just wondering why it seems that the tablespace does not use the second data file, I checked the status of second in the data file is online of v$ datafile. Could someone give me an idea about this problem? Thank you very much.

  c115bca7-E432-460f-a0c5-273b2157dcbe wrote:

  Hi all, I am new to Oracle DB. Reported by developer that storage space is full, and then I found that there are two data files associated with the storage space by checking dba_data_files. The first data file size is already full of 32GB, and the second is 8GB. However, it seems that the tablespace does not use the data file second when I check the free space of the tablespace because I cannot find its use. That's why Oracle DB shows ORA-01654 and tell me to add another data file. I fix this by adding another data file. But I'm just wondering why it seems that the tablespace does not use the second data file, I checked the status of second in the data file is online of v$ datafile. Could someone give me an idea about this problem? Thank you very much.

  1 cause the second data file - is not activate with auto-extend and its fixed size, 8 GB, which could deliver the extensions are not free - filled and that you may not able to find any free extends from dba_free_space
  2. Please activate auto extend for this data file and add the new data file based on space allocation.

  -Pavan Kumar N

• Audio does not not on iPhone

  I create a responsive project on Captivate 9.0.2.421. I downloaded the xAPI file to my LMS and tested in my iPhone6s (iOS10). The sound does not work. All other works, but I can't hear anything.

  To see if it was a problem with the file type (xAPI), I went to a class I created about a year in Captivate, what is a SCORM file. This file SCORM course previously worked, but now the audio does not work.

  Thoughts? Thank you for your community support!

  It is now a known issue with the release of HTML5 on IOS 10.

  Please log the issue with Adobe.

• Description Metatag does not show in the index file after the publication

  Although I was able to add the Google Analytics code in the HTML < head > in the field of properties mater as shown below, when I add the metatag info, it does not appear in the index file. Basically, I inserted the metadata in the main template.

  

  The index file in the ftp file server looks is shown below:

  

  The meta tag is missing the closing.

  It is not advisable in terms SEO to have the same description across all pages of the site. See the link below.

  Description of the Meta Tag - learn SEO - Moz

  David

  Creative muse

• Audio does not play is not on the timeline in CS4

  Hi everyone, Sub: Audio not playing is not in AE CS4.

  I am trying to create a video with audio in AE CS4. It must be synchronized average little by little, to say voices to be mapped with the video/animation sequence.

  But im getting a huge problem here, my video works but my audio does not work I can not hear audio at all... I tried to import the audio into mp3, mp4 and wav format but no solution I am facing the same problem. But outside the CS4 audio exhibit very fine, I even used many device to test audio everywhere as the audio works fine... and my hardware (Sound) system are up-to-date.

  I browsed google and tried all sorts of solution here but no use. I used numpad + 0 for voice, but whenever he starts from the beginning as a ram preview. It is difficult to adjust the voice between the two / sync make exactly. I changed the settings by going into preferences and exit but no use

  I seriously need a solution... or I want to know CS4 is better or not or cannot be used for creating object. I feel better for me change, author it and fast.

  Please guide me on this problem, thanks in advance.

  Concerning

  Sunder

  That AE can do for you, it's literally a RAM Preview. You can just use space because only you will get a preview of the video. A preview rather RAM to hear the audio. In the Preview Panel, there is a checkbox indicating "to present" check that so that when you do a RAM preview it would start the wherever is your current-time indicator. Just so place a second or two before are to be synchronized.

• edge animate cc Audio does not play on mobile phones and iPod if it plays perfectly on a mac pro

  I downloaded an animated cc published html with its edge. The html file opens perfectly on my mac pro safari browser perfectly with audio. But when I open the same file on my iphone5 file opens, but the audio does not play. What harm does anyone have an answer?

  Apple mobile devices don't support auto play. You must define a trigger.