Audio freezes first

Similar Questions

• What causes this? Video or Audio freeze parts?

  I have a new HP Pavilion 23 AMD 6 with processor 3.6.

  During the video play the video and audio freezes but the audio is also with the last blurrping of entry out like a hard F * T.  It's the best I can explain it.  It's only for the second or if but boring.

  Here's a monkey in the works. TV big screen, it's also. Here's the riddle. I think that the PC did this before I went to Comcast, a month or more before that Comcast was introduced into the equation. The first instinct would be to blame Comcast for the big screen TV is too. However, I never noticed on the Tablet, netbook or the older Toshiba laptop. ???? So who could let Comcast picked up, although it is strange that the new HP and the TV as well do it.

  Are there problems with the sound card or video on this particular PC or a setting that might help?  Here is a clip from the Device Manager and I hope that I've shown you the video and audio relevant.  I used all the updates that this pc has asked.

  Thanks much for any help!    «  :-D   Jack

  

  I ALWAYS KUDO AND MARKED RESOLVED. It is THE RIGHT THING to DO... doncha know. «  :-D
  Find thumbs upward, then click on to a KUDO
  Look to the right and see the OPTIONS to mark ACCEPT as a SOLUTION. Thank you!

  BigT55 - well this has been resolved but I don't know if you'll like the resolution. I did a full factory restore and the problem no longer exists.  And it was a couple of months then my statement is proven. So if you feel up to it, it could work for others.

• audio problems freeze first pro cc 2015 for a short period

  Hello! I think that I'm not the only one having problems audio 'new '.

  My system works well, but if I want to cut a clip preview is cold and I have to wait 3-120 seconds, then the preview will work.

  I tested a lot of audio options, but no one will work.

  Someone has an idea?

  (64 bit W7 PC / CC2015 / i7-3930K@3,2Ghz / Nvidia GTX 670 / Blackmagic Decklink / Scarlett 2i2)

  Go to the sequence key and uncheck the preview Composite during Trim.

• Freeze first column in IR Apex 5.0.2

  Hello

  I know, the Apex is not MS Excel, but I got a request on my place of work and I am having trouble with this problem.

  I need to freeze the headers (done!) and the first column in the interactive report.

  I used some CSS and I froze the first column, but only lines. The first heading is still moving horizontally.

  This is my demo app: https://apex.oracle.com/pls/apex/f?p=83445:1

  In the Inline CSS for the Page, I set "u - tR {position: absolute ;}"and this has solved that part of the problem above.} "

  Now, I need to fix the first heading that matches the label of this column.

  If anyone knows how to fix the first column using only css and jQuery for IR, I'd appreciate it.

  PS: I apoligize for my skills in English, I'm Brazilian.

  Hi Bruno.

  We can solve this problem by adding the following code to your DA

  $("#stickyTableHeader_2").css("margin", "0px 70px");
  $("#Id").css("margin","0px -70px");
  

  I hope that this action has resolved the problem

  Concerning

  Mahmoud

• Missing/spoty audio in first pro cs6

  I'm using Premiere Pro CS6. When I import a file, it's missing audio in some parts only. I have double/triple checked that the file has audio in the first place. He plays very well in the windows 'Movies & TV' app. I tried to re import it several times. Nothing. I even tried a completely new project.

  Someone one has any ideas? I've included a screenshot in case someone needs to see. 12 seconds, about when the cursor is, is the missing part.

  

  Right now, I noticed that it's actually a loop audio even earlier in the clip. The empty place was too repeated a place where the microphone is not yet performed. I still have no idea why or how he did it, but somehow he did, probably during the import.

  I discovered a workaround if solution. Open the Tongs in hearing and record audio separately, and then just sync the audio with the video. A bit complicated but at least it works.

• Any way to record Audio narration first and then video then?

  I think it's a better workflow (and ends up being faster than both both audio and recording after). We found another program that will allow us to do (but that has fewer features than Captivate).

  Our work will not spring for the two so we're throwing on the workflow functions (unless someone knows how do - hopefully its really obvious and I were just being dumb).

  I know that in the past, people have used the notes in a PowerPoint slide - just seems weird, you can't do it for other types of video recording and demos.

  Any ideas?

  Scaffolding is a pedagogical concept in education. This is a pretty good explanation (even just the first paragraph): http://edglossary.org/scaffolding/

  Scaffolding of process (and providing limitation or restriction) can be a good way to ensure a higher quality end product. If you use a software like Adobe voice he had built scaffolding process and restrictions. First you choose a structure (who made suggestions on what should cover each slide), and then you save the audio (never longer than ten seconds at a time) and then you adjust your layout and then you choose icons or images or text you sort your music and then you go through and then you export (and adjust export credits and titles). This is a truncated version of the film process that will guide you to make a better product. It's (one of the reasons) for which voice projects come out much more pleasant and the profession you could do on other software. You could do the same thing with PowerPoint, but you would use copious workaround solutions to get your content and PowerPoint does not provide you with this scaffolding as well, even as the most talented producers still fighting produce something better than a typical project of the voice.

  I'm not fussed on the subject all beings in a single product. I use the product adobe for over 15 years now - I can switch between programs that respond to different tasks. The real reason, I can't use both, it's that my work won't pay for two software which have similar results. If Captivate could do screencast-o-matic can do (without the workaround solutions), it would be a simple choice to go with Captivate. It would be even to be in the Captivate program - it could be in a sister program available with package of Captivate. The same way After Effects and first compliment.

  Now, it seems Captivate has more functions, but an integrated of any process which means that we will probably just stick with Screencast-O-Matic.

  What I want to really, it is on Adobe to take the understanding of theories and teaching that they applied to the voice and slate and apply that Captivate (or a program that is packaged in a purchase of Captivate). I think it's weird that they have not yet...

• No AAC audio in first CC 20141? [bug - solved]

  -Original message for reference

  I've just updated for first CC 20141 today.

  I have a set of files that I regularly converted with Handbrake MP4s with an AAC audio stream. I had no problem at all with the CS6, CC and CC 2014. But now with CC 20141, I have no sound when I import the mp4 files.

  The project window says it's a "Vidéo" file, not a 'Film '. The corresponding icon in the project window also missing the wave form on it.

  When I drag him in the timeline, only the video track appears, as you would expect. The only video appears correctly.

  Restart of PP CC 20141 did nothing.

  I've loaded PP CS6 and imported the exact same MP4 file and it works as expected. Windows Media Player has no problem playing the video file with audio either.

  What has changed between 2014 CC and CC 20141 which could have caused this?

  That's what MediaInfo report for the file:

  General

  Full name: D:\temp\Test-MP4.mp4

  Format: MPEG-4

  Format profile: Base Media / Version 2

  Codec ID: mp42

  File size: 45.6 MiB

  Duration: 4 min 46 s

  Overall bit rate mode: Variable

  Overall the rate of bits: 1 334 kbit/s

  Encoding date: UTC-2014-10-07 06:48:03

  Marking date: UTC-2014-10-07 07:18:53

  Writing application: HandBrake 0.9.9 2013052900

  Video

  ID                                       : 1

  Format                                   : AVC

  Format/Info: Advanced Video Codec

  Format profile: [email protected]

  Parameters of the format, CABAC: Yes

  Parameters of the format, Reframes: 4 frames

  Codec ID: avc1

  Identifier of the codec/Info: Advanced Video Coding

  Duration: 4 min 46 s

  Flow rate: 1 200 Kbps

  Width: 1 024 pixels

  Height: 576 pixels

  View picture format: 16:9

  Frame rate mode: Constant

  Frame rate: 25.000 fps

  Color space: YUV

  The chroma subsampling: 4:2:0

  Color depth: 8 bit

  Scan type: Progressive

  /(pixel*Frame) bits: 0,081

  Stream size: 41,1 Mio (90%)

  Library: x 264 130 r2273 base b3065e6

  Encoding settings: cabac = 1 / ref = 1 / unlock = 1:0:0 / analysis = 0 x 1:0 x 111 / = me hex / subme = 2 / psy = 1 / psy_rd = 1.00:0.00 / mixed_ref = 0 / me_range = 16 / chroma_me = 1 / trellis = 0 / 8x8dct = 0 / cqm = 0 / deadzone = 21, 11 / fast_pskip = 1 / chroma_qp_offset = 0 / threads = 18 / lookahead_threads = 4 / sliced_threads = 0 / nr = 0 / decimate = 1 / interlaced = 0 / bluray_compat = 0 / constrained_intra = 0 / bframes = 3 / b_pyramid = 2 / b_adapt = 1 / b_bias = 0 / direct = 1 / plombb = 1 /. graves GOP = 0 / weightp = 1 / keyint = 250 / keyint_min = 25 / scenecut = 40 / intra_refresh = 0 / rc_lookahead = 10 / rc = abr / mbtree = 1 / bitrate = 1200 / ratetol = 1.0 / qcomp = 0.60 / qpmin = 0 / qpmax = 69 / qpstep = 4 / vbv_maxrate = 20000 / vbv_bufsize = 25000 / nal_hrd = none / ip_ratio = 1.40 / aq = 1:1.00

  Encoding date: UTC-2014-10-07 06:48:03

  Marking date: UTC-2014-10-07 06:48:32

  Primaries: BT.601 NTSC

  Transfer characteristics: BT.709

  The matrix coefficients: BT.601

  Audio

  ID                                       : 2

  Format                                   : AAC

  Format/Info: Advanced Audio Codec

  Format profile: LC

  Codec ID                                 : 40

  Duration: 4 min 46 s

  Bit rate mode: Variable

  Flow rate: 126 Kbps

  Maximum bit rate: 164 Kbps

  Channels: 1 channel

  Position of the channels: Front: C

  Sampling frequency: 44.1 KHz

  Compression mode: lossy

  Stream size: 4.31 million (9%)

  Encoding date: UTC-2014-10-07 06:48:03

  Marking date: UTC-2014-10-07 06:48:31

  Thank you!

  Post edited by: Kevin Monahan

  Reason: it is there no first Pro CC 2014.2, you probably mean 20141. If not, please PM me.

  Hi wired.au,

  Thanks for this solution.

  Wired.au wrote:

  OK... after I finished my post below on how 20141 CC PP would not recognize my MP4s AAC mono audio track, I decided to produce the same MP4 with Handbrake, with a stereo audio track instead.

  It worked. After you load the stereo MP4, I re-imported the original mono MP4 which didn't work (without restarting the first or anything like that) and mono audio is now recognized. Looks like there is a strange bug with Premiere Pro CC 20141 and mono AAC audio tracks, which got solved after you import a MP4 with a stereo AAC track for the first time.

  I thought I should leave it here just in case someone else meets the same thing.

  Thank you

  Kevin

• Audio waveform first CC

  Is there a way to bring back the audio wave in first CC original-form because it is not readable?

  There is a checkbox indicating signals display rectified, this must be turned off. I'm not at my PC at the moment and I can't remember where it is. Try to do a search of forum of rectified waveform.

• Lumetri effect freezes first Photo Pro

  Hello.

  I explore the wonder of the Direct link. I applied a LUT to a clip in SpeedGrade. Then I directly linked the first sequence where the clip shows the effect of Lumetri in the effect controls panel. The problem: first will not play back the clip that includes the SpeedGrade changes applied. Audio playback, the CTI moves along it, but reading remains frozen on the last frame of the previous clip.

  I also tried my LUT to an adjustment in SG layer and still first plays not anywhere that the Lumetri effect is present.

  I'm working on a new Macbook Pro retina 15 "with 2 GB of Vram and 16 GB of memory.

  Thank you!

  Johnny

  Yes, you can apply directly to the LUT PrPro. The way I found is to get the free S.redgiant "Lut Buddy' program...

  http://www.RedGiant.com/products/all/Magic-Bullet-Colorista-free/

  It lists only compatibility upward through the CS6, but works everyday in my version more recent-CC PrPro very well. Available for windows and Mac, once installed, it gets with the section "Video Effects" of the "Effects" such as 'Magic Bullet Colorista' pane. Click on that the only registration is "LUT Buddy." Double-click on this point and upward into the area source go to the "Effects" tab, and you will see " fx LUT Buddy ' here." To the right of this line is an icon, a little like an arrow pointing to a dialog box. Click on this icon, you get a very old dialog box that allows you to import the LUT and access them. Of course, you can then use this effect in PrPro controls to fight it... strength? ... and other things.

  Sometimes the LUT can I apply in Sg and return PrPro in the saved project don't like direct work in PrPro and I had a couple that work here, but Sg dislikes. LUT most work, however.

  You can also use this subroutine above in Ae, to copy the effect of Visual controls it in a LUT or make a 'draw model' of your monitor program and then a model of 'read' to create a LUT directly from your work in Ae.

  Neil

• Number of component snap for recording audio in first

  Hello

  I want to give a narrative to a few video tutorials that I do. It may sound crazy, but I am currently doing all the video in first Pro CC (because it's awesome), but I added the narration in the app free iMovie from Apple.

  The reason for this is because iMovie has a large "count-in" before the start of the recording. Count three seconds once you begin to save and allowing the preparation make the clip and above all, the microphone is turned on, but the 'pop' and other sounds are not saved. The result is perfect, fluidity when recording the narration sequences.

  I don't want to do it on iMovie because it is a concern of loading in a second project in a different application. But for the life of me I can't understand how to do this on the first. Is it possible to implement a number of component software plug-in or is first there something different but equally good?

  New features of voice have been added in CC7.2 (mid December 2013), with a countdown. If you're on the latest version of CC, you should find the voice record button in the Editor button for audio tracks in the timeline panel, which you access through this Panel (the wrench) timeline view settings menu > customize Audio connector...

  If the button does not appear here, because several users have reported, then please see this post: http://forums.adobe.com/message/5936201#5936201

• USB microphone is not listed in the Audio of first drop down hardware

  Hi all.

  First of all, I would be grateful very gladly any idea here because I'm totally stuck with this tent to record a voice on the track.

  The title is pretty self-explanatory. I work on Mac OS X and first Pro CS5 and I would like to record an audio track, but the USB microphone is not displayed. I have already read several forum discussions and followed the steps, but this problem has not yet been mentioned.

  That's what I did several times without success:

  1 - Connect the USB cable and check that MacOS recognizes. It works very well.

  2 - in Premiere Pro mark taken as a track record. Error message because no input device has been declared.

  3 - premiere Pro > > Preferences > > Audio-Hardware-> no microphones on the menu drop down.

  4 - Open audio and Midi and I add all microphones to Premiere Pro (Line-In, built-in and USB device).

  5-return to step 3: reopen the project > > Preferences > > Audio-Hardware-> Line-In and integrated appears, but not yet of micro USB.

  I was able to record with the built-in microphone, but I don't know what is happening to the USB one. In fact, if I go back to step 4 and open the audio and Midi, boxes that I had checked once reappear unchecked.

  I don't understand what is happening. Thank you in advanced for your help.

  I'm a PC guy, but if I had your problem I would try to turn off the microphone integrated and entry at the level of the BONE, so that the only possible option for the operating system and applications of line would be the USB microphone.

  I use a Logitech USB headset and Pr CS6 has no difficulty to recognize or record with her.

  Jeff

• Audio elements, first 13 (trial), Samsung Ultrabook NP730U3E with Windows 8.1! The problem: if I transfer a clip in the monitor window to the timeline of the audio disappears

  At the moment I have transfer a scene of the window from the monitor into the timeline, my audio disappears. Monitor play sound in the window. How can I solve this problem?

  The problem is resolved by reinstalling the software.

  Gert

• No audio in first, after you import the clips of the iPhone 5.

  Worked very well and has always been, until midway through a project with the iPhone 5 (.mov) video, no sound.

  There is no sound only appear in the sequence, and I see the video of the sequence.

  The audio plays fine, when I open the file in media player.

  Please help, need a result tonight.

  Thank you, Mac.

  What happened when you load the clip in the Source monitor Panel?

  If you get audio in the source monitor, then I'd bet that the problem is that you have no selected audio track to source patch. If the left side of the Timeline looks something like this, then click on A1 to activate the source patch for audio.

  

• First Freezes / crashes during import & consistent - all better workarounds out there?

  Since the last CC update for the first I had the SAME problem on five different machines. During the import will freeze first, and I have to force quit smoking (mac) and reopen in order to correct. Sometimes it works, sometimes it doesn't - little matter HOW to import (media browser, file/import, and then drag from the finder etc...)

  Also, while in line first will freeze or hang on a clip and I have to save/restart so that the process pick up, where she had stopped. If I try to access the clips for confirming I'm risking clips (MP4 of C100 or of the C300) lack of large gaps in the audio.

  Finally. Once I am able to do import / in line, when editing, I'll open the files to see that many will not be load clips and show "media disconnected" when I try to play them (even if they show the poster frame when still. By opening and closing the first solved instantly.

  These questions don't are NOT material related such as the material has not changed on any computer. It is a software and it is the first which is the origin of the problem. They need to fix immediately. Our workflow is suffering of many man hours lost because of problems which do not arise until set CC to update the software.

  I tried to roll back and some questions were better, but others above were still visible. That save and reboot the software almost always solves the problem until the next time, there arises, makes me confident that it is a software problem. I ask first to do the same thing several times the same way, and sometimes it works, other is not.

  Someone has a workaround that is better than constantly economy/forcequitting/restart the software?

  OK - I figured out how to install the 2015.3 version. Under 'Find additional apps', I changed 'filter the apps' 'previous versions' and was able to select. It installs now - will update if it helps at all.

• Audio / video freezes

  Of most of the sites that play music / clips after clicking AutoPlay or playback the audio starts then stops the video and audio freeze at this stage and will sometimes start back by playing. This problem is every day, but not all of the videos, or other securities, but its pretty than its #$@ &! % of frustrating! Help, please... Al

  I have a windows 7 hp Pavilion desktop

  follow these steps:

  Click Start

  go to the control panle

  Select programs and features

  Locate "Adobe Flash Player" OR "Macromedia Flash player"

  Click on it...

  then click on remove/uninstall part superior of the window...

  now restart your PC

  now, download the latest version from the following link and install it on your PC:

  http://get.Adobe.com/flashplayer/

  Click on the above link and click on download now... you'll have plenty of instruction...