Audio / video freezes

Similar Questions

• Audio video players have an intermittent humming/freeze for 1-2 seconds - Dell Vostro 5470 Win 8.1

  Help - all devices audio / video have intermittent hum and freeze the video on my new Dell Vostro system 5470 Win 8.1. This happens with Windows Media player, various audio players, even in Skype!

  I see messages on the removal of the center of support Dell etc. that is not the response that users should have to live with - Dell?

  I have a XPS 17 (L702X, early 2011) and removed Dell help. This solved this problem.

• Inspiron N7110 - video freezes / audio stutters / CPU use spikes

  Hello

  Recently, I'm having a problem watching videos (on my laptop and internet). The problem is that the video freezes for a second, while the audio stutters. What I also noticed is that with this problem, the resource monitor displays this: http://img834.imageshack.us/img834/7656/freezingr.jpg .

  When he first started I thought it was a cooling problem, because my CPU cooling fan had become very noisy. Well, I changed the fan and the continuous problem bothers me. I did a few other things to try to solve this problem: uninstalled and reinstalled the Intel HD Graphics driver, ran chkdsk - both does not solve the problem. I ran a full diagnosis of Dell in http://www.dell.com/support/Diagnostics/us/en/19/ , but he did not take questions. I googled the problem, but I was not able to find a solution. I'd appreciate any help. My laptop is that 8 months.

  Hi Rolland666,

  Have you installed Dell Intel drivers support site video fron?

  Update the BIOs on the computer.

  Click on the link below to update BIOS:

  http://Dell.to/13kNGMc

  • During the update of the BIOS, check that the computer is connected to an AC adapter.
  • Disconnect all third-party devices connected to the computer before performing the BIOS update.
  • Do not turn off the computer during the BIOS update.
  • Do not restart the computer during the update of the BIOS.

  Note: Plug your computer into a wall socket, work before update you the BIOS. If you experience a loss of power or voltage important sag/tip during the BIOS flash, you will need to either buy a new BIOS chip or buy a new motherboard.

  In addition, run hardware diagnostics on the computer. Restart the computer by pressing the power button FN and at the same time. Let the full diagnosis.

  Waiting for your answer!

• After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance.

  * Original title: System Restore

  Windows 7 Home Premium

  Dell XPS L502X

  Intel Core i7-2670QM CPU @ 2.20 GHz

  8 GB RAM

  After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance. The video freezes for a split second. I tried system restore several times, but my computer could not be restored to several dates I've tried. If I do not solve the problem today, tomorrow morning I'll try an advanced recovery method. I have a Windows 7-64 bits of the operating system at the same time, graphics cards Intel and Nividea. I had this same problem several times since I got the computer (Dell). Dell has replaced some hardware. Previously, he was my Western Digital external hard drive software that caused the problem. After that I deleted the software from the computer, the problem has been resolved.

  Does anyone have any ideas on how I could get the system restore to work? Or another suggestion that might help solve the problem?

  Thank you

  Joe

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________________

  And some information for you about Windows updates:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Audio video problems

  Windows 7 on EMachines when playing a video online audio and video starts OK and buffers quickly, but the audio stops a few seconds and the video freezes as well as audio.  Very 'jerky' effect  It stops and starts every few seconds throughout the video.

  Windows 7 on EMachines when playing a video online audio and video starts OK and buffers quickly, but the audio stops a few seconds and the video freezes as well as audio.  Very 'jerky' effect  It stops and starts every few seconds throughout the video.

  Smooth buffering depends on your internet speed. Make sure that your connection is very good.
  Download and install the latest version of adobe flash player.

• Gurgling noise in Audio/video playback

  Hi, I hope someone can help any detailed instructions would be great.

  When playing audio/video, an intermittent gurgling noise (freezes too) occurs if playing stored or streaming media (audio and video) for example iTunes, YouTube, windows media player, etc..

  All solutions please share! Have already updated drivers. Contacted customer service, basically, they did the same drivers uninstalled then reinstalled does not.

  Note After searching questions, which seems to be a problem for other people too, not only of Sony. If it helps, even if the laptop is model SVT13134CXS VAIO T series 13 Touch Ultrabook.

  Thanks in advance for any ideas.

  P.S. Here's an example of how it sounds, in my opinion, it starts at about 01:30
  http://m.YouTube.com/watch?v=CF9Pvdsz0UM

  To further isolate the issue, you can run the Checkdisk utility under windows.  You can also launch the VAIO Care and use the tools in this application.  There are some hardware diagnostics, as well as the VAIO Care convenience store and one-click-care.  These tools can scan your PC and try to solve the problems.  Give it a try and see if that will make a difference.

  If my post answered your question, please mark it as "accept as a Solution.

• Problems with audio/video streaming with USB devices on zero clients

  Hello:
  We are using view 6.1.1 in our environment and problems getting audio/video streaming to work well with the USB headsets, with zero customers.  Helmets are Jabra Link 360 and customers zero Samsung NC241.  Helmets are used as well for the phones to Jabber and also as audio device by default.   We started with the audio driver Teradici and everything seemed to work well, except that users could not answer calls on the headset itself with the button on the headset.  They were able to answer the calls of Windows though and the part worked fine.  In order to get the physical button to work, we had to first fill the USB receiver they use on the zero clients so that Windows will see as the device Jabra 360 and not the audio device Teradici.  Then we had the EHCI USB mode on them as well, and after that he started to work very well.  However, the helmets also serve as the audio device main as well as the communication (phone) device, with audio streaming continuously throughout the day.  With the current configuration, audio streaming will cut in and out during the day, and audio/video is not always to stay in either phase.

  I also applied the registry in this KB hack, VMware KB: improvement in audio quality when you use speakers or USB headsets with a desktop VMware view Horizon 5.2 , which helped clear up Crackle that we originally with the part phone headsets.  But there is still the issue of streaming audio.

  I wonder if the effectiveness of the bridging USB is not as effective and also is there a way to make this work better?  I read that the use of the pilot Teradici is supposed to help with audio/video problems, but do not know how that can be applied to USB devices as we use.  I've been reading upward on Teradici audio/video settings, but do not know where to go from there.  I was hoping that there are some best practices to use USB headsets with a view, but so far I'm not finding anything useful.

  For any help or suggestion would be greatly appreciated.  Thanks in advance.

  We were finally getting help by the people of Cisco after validation in the here and even open a support ticket with VMware, which was open for more than a month without will.  Where others try to implement similar, here are our findings:

  • Zero clients combine traffic USB and PCoIP.  It is not good when there is a lot of audio/video/USB traffic, especially the USB headsets that also carry audio softphone.  In our case, the USB traffic was so dense that it was causing audio and video become troubled and freeze and eventually cause the pcoip_server service to break in the virtual machine itself and cause the client disconnect.  The fix?  Don't use customers zero with USB phones software, they are not just designed for this type of solution.
  • Thin clients are much better designed for USB softphones.  In our case, we used the Cisco VXME client, which is the method of support for the use of Windows thin clients with the client of the Horizon.  There is integration between the two products that isolates the VOIP traffic out of the virtual machine and keeps it local on the client itself.  Regular audio and video traffic still go through the virtual machine using Teradici or VMware RTAV driver.

  Hope this helps others who may run this question.  One thing we did not try was a wired headset using the AV sockets on the zero client and Teradici audio driver.  This can work, but our needs here were the headphones must be bluetooth, so we were forced to stick with USB.

• Win 8/IE 10: video Flash in mode full screen in dual monitor; video freezes on the second monitor

  All,

  At the launch of a Flash video in full screen when you are using two monitors, the video freezes at a still image on the second monitor. This happens in mirror and screen extended mode images.  The video continues to play normally on the first screen, and the audio continues normally as well.  This problem appears only during playback of the video using Internet Explorer, do not not Firefox.

  This seems to be a software problem, not memory or devices.  To be clear, the video is not stutter. rather, it freezes at a still image. I didn't have this problem using internet explore with the same configuration until I upgraded my laptop Windows 8.

  Here is my configuration:

  Windows 8. Internet Explore 10.

  Shockwave Flash Object: 11.6.602.167

  ASUS laptop computer connected to a HD LED TV via HDMI.

  GeForce GT650M graphics card.

  Core i7 and 8 GB of RAM.

  You think, what is happening? Troubleshooting ideas? Thank you.

  I just gave it a try on my setup triple monitor, but could not reproduce the problem.  I tried both stretching and duplicate the work stations, but they all work as expected.  If Firefox works well, then I wouldn't suspect your video driver but it is probably useful to take a look without worrying to do of course, you have the latest driver installed.  Then, try to temporarily disable hardware acceleration to see if that makes a difference.

  How to disable or enable hardware acceleration?

  http://support.Microsoft.com/kb/2528233

  Using IE in desktop mode or modern/metro?

  Thank you

  Chris

• CS3 - video freezes on the Capture and playback - please help!

  Hi all

  Here's the problem:

  When plans to capture via firewire Mini DV, shot in DV standard, within a standard NTSC DV Widescreen 48 k project, the picture freezes after 1 second.  You can still hear the audio and images actually get caught.  However, after the sequence has been met, and load us the clip in the Source window and press play, the video freezes after 1 second game again.  Once again, the sound continues to play and you can move the cursor anywhere on the clip and see that all the images are there, but as soon as you play from any point - the same thing, the picture freezes after 1 second of game, which makes editing impossible.  The clip is captured as a .avi and all acquisition settings appear to be correct.

  Here are the best:

  -HDV video captures and plays back.

  -DV videos entered correctly at the beginning, this has been a recent problem going on now for several weeks, after no change in the system.

  -The biggest kicker - after trying successfully capture, playback and video editing, we closed first, has reopened, has tried to play the previously captured DV sequences and he plays very well suddenly in HDV !  Then we closed the program, reopened and tried again - back to the gel problem and he never played back fine still...

  Here's the specs (I can give more details later if necessary, it's computer of my partner):

  Sony PD-150 DV - Cam (but record on Mini DV in mode standard DV, DV - Cam no)

  Windows 7

  Intel Core i7 3,20 ghz

  Asus X 58 motherboard with onboard Audio and Firewire

  6 GB of Ram

  NVIDIA Geforce 9 Series with PhysX

  Please help if you have an idea how to solve a problem crazy like that.  Thank you!!!

  Greg

  you have windows updates turned on? Sometimes the updates can mess things up. turn off if its on.

  try to disable physx and see if that helps... you don't have that with the exception of the games.

  try to activate hardware acceleration a notch... see if that helps.

  the graphics card is overclockee? If so, go back to normal speed.

  Defragment your hard drives, including the pagefile - get rid of something not necessary on your drive (s) to give you as much free space as possible (before defragmentation)

  Update your video adapter driver to the latest version. something might have messed up the driver...

  If you have a heat on the map problem, it could be a factor...

• Satellite R630-13R - HDMI output only for the audio/video receiver?

  I have the opportunity to play the DVD on my Satellite R630-13R with the release of his passing through the stereo jack to my amp, but now that I have to buy a new amp, I've been watching AV receivers that have the HDMI inputs and pass through the image.

  I won't have a TV screen connected for a while (until what it comes to upgrade), but can I enjoy the HDMI sound transformed in the audio/video receiver in the meantime?

  Hey,.

  Yes, you can use the HDMI connection to an AV receiver as HDMI transfer its too.

  I found a thread similar to the receiving subject audio/video HDMI. Maybe it of useful for you also if you have any problems with correct configuration:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50845

  I hope I could help you :)

• Camileo H30 - Audio & video don't work synchronously with Win XP

  My computer is running Windows XP.

  I downloaded DivX 7 as an actor of HD movies.

  But when I download the videos to my computer and you try to play with the DivX 7, the sound is out of sync. But the videos shot in SD play fine.

  Any idea why this might be happening and how to fix?

  I also have the ArcSoft software installed as well.

  Hello

  I have read a lot about these symptoms and it seems that your material is not keeping up with the reading.
  The reason is that the sound plays back well, because its easy for the hardware of computers to do this, but if it is the video, the system is overloaded. The part big percentage of executives "fall": This means that they are not displayed. The frames are correctly displayed are usually late and this causes audio/video synchronization issues. If you have a video problem fell/delayed due to the computers hardware limitation.

• Preview of Skype audio/video settings

  I use Skype on the anniversary edition of Windows. I have three independent audio devices on my Surface Pro 3 - audio device + a Jabra GN9350 and a Microsoft webcam camera + speaker. Where can I say Skype Preview which device to use for audio or video calls? I used to go to tools-> Options-> Audio Settings but I can't find the menu bar. I looked in the settings and not to see any reference to audio/video. I DON'T want to use the default system that will mess up my sound preferences for non-Skype applications. I also use another device for Skype for business that I do for the preview of Skype, so I need an independent way to configure Skype Preview. Help, please!

  I forgot that I was going to type something else, in order to hear it is...

  You can't use Skype preview, you can still use Skype desktop program, just disconnect from the preview and launch the desktop program and log as you did.

• Skype Audio / video call disconnect after 14 seconds in mac

  Skype Audio / video call disconnect after 14 seconds in mac

  1. call interrupted after 13-14 seconds

  2. cannot hear the caller's voice but may receive on my side

  3. I have reinstall the Skype delete old does not work

  4. even I have remove the whole mac and reinstall is the same question

  5 normal voices of Skype can hear I can do auduio / video on the face time

  so its means something wrong after that I tried everything I decided to inform Skype because I didn't even have no solution or anyone else have problem with that

  Finally I found the solution that my firewall was turned off, I just turn on and work and then I turn off again and its working fine but this solution that I found after post

• Skype video freezes after 30 seconds...

  I use acer e1-e572g, windows 7 x 64, my camera works fine, drivers are updated, connection speed is optimal, but every time I start a video call my video freezes to the other person, so that my living room from the camera that works normally. I tried many things and I'm out of ideas.

  Can someone help me plesae!

  Try to uninstall the currently installed version of Skype and install the previous 6.14.0.104 version by using the download links provided here:

  http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

  Be sure to turn off the automatic updates:

  Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates

• Video freezes and stays frozen

  Hello

  Each time, I use Skype my video freezes after a few seconds. Sometimes it will unlock after a few minutes and sometimes not at all. I am currently using Skype 6.21 and have a logitech c270. The c270 works very well with my laptop. I would be very happy any help that could solve this problem. Thank you.

  Here's my DxDiag and newspapers.

  Try to uninstall the currently installed version of Skype and install the previous 6.14.0.104 version by using the download links provided here:

  http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

  Be sure to turn off the automatic updates:

  Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates