Audio in .mp4 cutting file

Similar Questions

• No sound/audio in MP4 files

  Hi hoping someone here can help out - I use El Capitan 10.11.6 and the audio is missing some MP4 files that I downloaded from a GoPro camera. My sound is fine otherwise, output noise is fine, alert sounds are fine. MOV files off other cameras play well with audio easily here, but I don't hear anything in the files MP4 Quicktime, VLC, Final Cut Pro X, even if in Final Cut Pro X there is an audio waveform on each clip and they were converted to Quicktime using the MPEG stream clip (there no audible sound in the program either). I tried the same files on colleagues Mac running Mavericks and the sound is fine out there so here something to replace or reinstall?

  You run the same exact file on El Capitan and the Mavericks?  Shouldn't be any change unless MPEGstreamclip has been defined to use some esoteric audio codec in the file.  First of all, there is no reason to convert the files off your GoPro.  FCPX will work with native files very well.

  And, if you never convert, use the GoPro Studio app for this.  Nothing I do will have problems with the standard files.

  We use GoPros all the time and didn't have any problems.  What are the settings on the GoPro cameras?

• MP4 video files do not appear in Windows Media Player 12

  Hi, I have Windows 7 64 bit and WMP version 12.0.7600.16667

  I have several .mp4 video files in the folder my videos that do not appear in the video library (other type .avi files). I want to listen to these files on my Sony Playstation so I did already a lot of googling but could not find a solution. From what I checked on my system, I already have a codec and if I click on a such file in play in WMP.

  Can I do to solve this problem? Thank you.

  I don't know if it has changed since Vista but Mp4 video was not a video file type recognized, so a registry change has been necessary to make it usable as MS file formats AVI or WMV etc... MS has (yet?) Default identified it as an audio file format. MP4 is in fact also a video container type of file, such as AVI. You need a separator of suitable as well as audio and video CODECs on the system file.

  The instructions for the installation of ffdshow and Haali splitter should work:

  http://www.Afterdawn.com/guides/archive/how_to_play_mp4_files.cfm

  It is essentially the same thing that I've done and MP4 files appear in my video library WMP.

• Truncated in the output MP4 FLV files

  I have half a dozen isnerted FLV in my presentation. They play very well when I published as a SWF project.

  When I publish as MP4, FLV files is truncated; the last second or so are cut.

  Saw nothing in that regard when searching.

  Any ideas?

  I like some time on the timeline plays FLV files.

  On another less critical note, when published as MP4, loading the FLV is captured in the video. Cheesey.

  OK, my bad. I inserted in the Media drop FLV files, as opposed to video > insert video. The diff between the video and the video of the event was lost for me somewehre along the way.

  Not sure why the Media should get boogered up.

• DSC-WX300. How to keep the vdo as mp4 format file and not mts format on the device.

  My camera would save vdo mp4 format files earlier. Now, he recorded format mts who are difficult to display on computers. Please advise how to set the camera to save in format mp4 vdo files.

  The instructions to change the mode of shooting (MP4 or AVCHD) can be found here: film Format

• During playback of the audio wave or mp3 files or listen to audio on my computer, it is occasionally a few distortions (crackling noise)

  When you play any audio on my computer file, or listening to any audio on my computer, either by e-mail or by using Windows Media Player or itunes, there is sometimes a slight distortion that occurs, is not there when I listen to the audio file using a different medium than my computer.

  Hi, thanks for your very complete instructions. In response to your question, I have a HP ProBook 4530 s. computer I was able to go on the site HP Support help and download an updated audio driver. The question now seems to be resolved. I printed to the top of your instructions, however and keep them for future reference.

  Thank you

• Can I transfer my DSLR camera to XP MP4 video files

  Have tried to transfer MP4 movie files from my digital SLR camera for laptop XP - but nothing happens. I don't want to install PMB supplied with the camera

  Something to try...

  Connect the device to your PC via a USB cable.

  If all the windows launch... Close them.

  Reach... Start / my computer.

  The camera is recognized by a drive letter? Can say removable drive with a drive letter.

  If_Yes_right click on the drive letter and select... Open or explore.

  This should display the directory of the memory card from the camera.

  Now you can navigate through the folders on the memory card until your find the video files.

  Right click / Copy the video file.

  Right click on the folder you want what he recorded in and choose Paste.

• Extract the audio channels to mono files - does not

  When I right click a file .wav stereo in the files Viewer, why are the "extract audio channels to mono files -" option grayed out?

  It worked for me a few weeks before a hearing CC 8.1.0.162 update.  I resorted to using version CS6 where it always works.

  Well, even if I don't use it there, I agree with you - it does not work and is grayed out, and there is no reason that I can see. It still works fine in the Edit menu on the same file, and also you can assign a keyboard shortcut, so you have not really lost all features, even if I would say it was a bug...

  I'll connect it with a reference to this thread.

• Is it possible to add cue points to a MP4 video file?

  Is it possible to add cue points to a MP4 video file?

  Director has a findposnear function that allows to quickly search currently of film in a list of times, giving you an index number that you could use on another list. It is easier to use than benchmarks!

  Adobe Director * findPosNear

• My. MP4 video file doesn't "play video full screen" to Muse after I publish my. OAM outboard animate.

  My. MP4 video file doesn't "play video full screen" to Muse after I publish my. OAM outboard animate.  When I "saw in the browser" through the edge he plays (I created a form and used the extract of "video game full screen") mode full screen very well.  When I "Site Preview in the browser" through Muse and click on the shape to PLAY VIDEO FULL SCREEN, it does nothing.  I am new to both programs and can't understand why it will work out of the onboard preview window and will not work when I publish to Muse.  Does anyone have an answer or a workaround for me?

  Hey watch this video

  If this is what you need, you can get it here .mulib [[zazaalaza]] - Google Drive

• Panasonic P2 import - audio problem of multiple files

  Hello

  I have a problem with MXF Panasonic P2 in first CC 2014 files. We have an a video in 3 parts (3 files on the disk). When I import video ago only audio of the first file. The video is OK. The rest of the clip is without audio. When I import the same clip in the first CC (7.0), everything is OK.

  Hello again,

  I tried record new file to test in the camcorder this morning (1 clip = 5 files on the P2 card). After you ingest using prelude CC 2014 (3.0), its OK there.

  Could be a problem caused by the previous ingest using prelude CC (2.0) and editing using first CC 2014 (8.0)? Could not be here any incompatibility with Prelude CC (2.0) and first CC 2014 (8.0)

• Error "could not get the audio data in the file.

  Hello

  I get a lot of mistakes "Could not get the audio data in the file" when you open a project. Sometimes they will plant Premiere Pro CC 7.01 (Mac). But if no first works as usual, with the audio.

  I tried to convert the audio files (from the hearing) from 32 to 16 bit. It worked while opening a project once, but not the next time.

  Where can it be?

  Edit: I also get this error when importing audio: "error: Premiere Pro version 7.0 is not compatible with the first version of plugin Pro 5.7.4. Maybe it's related.

  I have it! This is the plugin Smartsound hurt. Got rid of him and no more errors.

• Body 5.03 only 'imports' half of the audio while mts compliant file... need help ASAP please

  Hello, it's never happened before: computer hp laptop dv4, card ati graphics, dual-core 2.3 ghz, 8 GB of ram, the mts files camera canon avchd, windows 7 64 bit, maudio profire610 asio driver and interface

  6 files play fine in vlc player and zoom, but body 5.03 imports only half of the audio, while meeting each file

  I do not touch anything until the files are actually

  I started new projects after clearing the cache and preferences and media file cache

  I'm a complete lost... someone can help please

  I built all kinds of things on this laptop with premium production 5.03 and never had a problem with images...

  Thanks in advance, d

  Also the vlc player and zoom are there any other .mts file players out there?

  The specifications of this laptop are far from edit the AVCHD material, only a dual core, AMD, very little graphics memory and a slow disk configuration, I guess than the minimum.  With the resolution of the screen, it does even not meet the minimum requirements for Adobe. The single drive 5400 RPM is less than the minimum needs, in short, it means underspecced for your editing needs.

• HELP PLEASE! I lost about 400 GB of MP4 (film and audio book) using Chkdsk files. He repaired broken sectors/files regardless, but it changed the extentions. How can I find new extensions? they are there, but I don't know how to find them.

  I have Vista Home Premium. I have a huge media collection for my ipod. I save all my video files and files on an external hard drive (my book 500 GB) audiobook while they clutter up my internal drive and so I can store them where my internal drive has failed somehow... Well I got the opposite happens. I started to get my video files would not open in their records. I ran Chkdsk utility to "fix" the files. When the program has finished running he had a Msg: something has changed the names of files and everything I was supposed to go to the files and the rear switch (as far as I can remember... I don't wear SPECIAL attention for the MSG that I thought it was normal and the program would take me to the files when it was done... ERROR. All desktop shortcuts no longer find files directly by going to my computer, then by looking at the HD I cannot find the files.  I used the program REcuva file hippo and it restores the few files that have been deleted out of the dirve and allowed to see some of the video files and audio books (but no tag info remained on the recovered files. I had to so I would like to know what they rename them). Other than these few files... less than 20 I t help either. Records that they are still there, but it asks me to open files with a program from a list of choices and not of the program draw files. (the choice to choose this high program open this type of file is also blacked out). Also when I run the cursor over the records of the size of the files do not match wat I know should be in the files. But if I just look at the my computer screen and run the cursor over the icon of the letter itself it show that there is 435 + GB hard disk info and 50 + GB of space left on it.
  A few questions:
  1. is it possible to see all the possible msg that the command chkdsk can generate so I can find that he gave me when he fixed my files?
  2 - How can I find these files if I don't know the extensions I'm looking for? they were for quicktime mp4 files, but I don't know now.
  3 - If the drive to my drive internal and try to list the backup files is located on the drive where I'd start trying to open the files?
  4 do I just need to cut my losses and reformat the hard disk, crying over 2 years, he took me to build the library and start over again >? (at least I kept some of my files from itunes library since itune on DVD about 1.5 years ago (about 300 GB of data there))
  And by the way the reader is set up to the FAT 32 format, that I did not know until this all happened.

  Go to start / Control Panel / folder Options / View and uncheck Hide extensions for known file types.  You should also check the box to see the system and hidden files while you're there.  This should show you the extensions of all files if that is the problem.  You can then rename the files for extensions are associated with a program that will open and read the files (you may need to experiment first with some programs to find one that works and an extension that works if they have been changed).  I don't know any way to do this for all files at once - they will have to be renamed individually (yes - I realize counts the number of files involved, but I know of no program in Vista or even a 3rd party program that will change the extensions for a group of files at a time - you can check for yourself on www.tucows.com and www.download.com).

  Desktop Shortcuts no longer work because either the file type of the source file has changed and the shortcut does not open the file, or because the file has been moved and the shortcut can not find the path.  You should be able to check the path by finding files (whatever they are now called) and see if they are in the same directories in path as they were before this happened.  I think it's because the source file works more correctly because of the extension (or corruption).

  Recuva to recover lost or deleted files - not the files that are on the system (and you won't not solve your problem by deleting them and then use Recuva to recover because it sounds like the problem is with the extensions and Recuva is not going to be able to correct it (it is not part of his program)).

  There's no list of ALL possible messages that might be generated by chkdsk I know.  Here is an article on the chkdsk command works in XP and some messages it generates - but far from everything and nothing look like the one you receive (and it works essentially the same under Vista): http://www.isd518.net/District/TechDir/Help/Chkdsk.htm.

  The backup on your internal hard disk drive will not solve the problem - just move it.  The 'damage' to the files are already done a backup now will not solve anything.  The fact that the drive is set up in format FAT32 is not the question (and probably not the question in the first place is) and change to NTFS now is not going to solve the problem (although you can do that after all this has been resolved).

  I won't tell you to cut your losses - this is a pretty drastic step and there may still be other options (although I don't know myself).  You can take the reader to a recovery expert data (NOT Geek Squad or one of these other major centres to store) which may be able to recover some, most, or all files.  It will be expensive and only you can decide if it's worth the cost.  These people usually the game fee and do not offer a guarantee of recovery - even if they don't recover anything you always pay.  The decision is yours.

  If none of this works, transfer your question in images and videos Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where people who specialize in issues related to the video may be able to help with your problem, since it's video files.

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• extract audio from mp4 files

  Hello

  Is it possible to split the audio to a mp4 file in Labview? We have used the QT X active component to work with the video images but sees no way to work with the audio portion. We are looking to find the timestamp of a specific image in a mp4 file who is savvy to the audio segment of the mp4 file. Any suggestion would be appreciated. Thank you

  Hey blewis333,

  I don't think that there is an easy way to do it.  My best recommendation would be to find another piece of software that you can call via ActiveX.  I think that VideoCapX (http://www.fathsoft.com/videocapx.html) would be a good thing to look at.  If you can call this program through ActiveX, extract the audio in MP3 format, and then convert it to one. WAV file, I think you might be able to do what you're trying.

  Other than that, I think that your best option is to ask if anyone else has been able to do and if they can share their solution.

  Good luck with your application!

  Best,