Audio Jack can not insert

Similar Questions

• My Dell XPS 15 audio Jack does not work.

  Hello, my new Dell XPS 15 audio Jack does not work. I just got this thing out of the box.

  I have updated the drivers and stuff, which doesn't seem to be the issue.

  I tried several headphones as well, the helmet is not the issue.

  I've isolated to this: when I plug in the headset, nothing happens. If I ask about 15-20 lbs of pressure, forcing the connector of headphones into the socket as hard as possible, the cell begins to recognize and the helmet works. As soon as I let go of the connector, the laptop will behave as if the device was disconnected.

  What should I do?

  rsidhu89

  What should I do?

  Hello. Your options are to contact technical support to schedule a repair, or return it for a refund or Exchange if you are still in the short return period (twenty one days from the date on the invoice if you got from Dell).

• I'm working on an evaluation version (NL). There are no categories in my insert Panel. So I can not insert a PA element or a named anchor point or... etc. I have download the wrong version?

  I train on a trial version 2015 (NL). There are no categories in my insert Panel. So I can not insert a PA element or a named anchor point or... etc. I have download the wrong version?

  It has changed a lot since CS6 DW is released in 2012.  Often people read the tutorials that have been written for this version and do not understand that it is more relevant for DW CC.  Below of the links that describe in detail the changes in each version.

  List of deprecated features:

  http://helpx.Adobe.com/Dreamweaver/using/the-new-modernized-Dreamweaver-cc.html

  New features in CS6 12.2

  2013.html http://helpx.adobe.com/Dreamweaver/using/Whats-New-Dreamweaver-Creative-Cloud-Release-Feb-

  New features in CC 13.0

  http://helpx.Adobe.com/Dreamweaver/using/whats-new-Dreamweaver-CC-2013.html

  New features in CC 13.1

  http://helpx.Adobe.com/Dreamweaver/using/whats-new-Dreamweaver-131.html

  New features in CC 13.2

  http://helpx.Adobe.com/Dreamweaver/using/whats-new-Dreamweaver-13-2.html

  New features of CC June 2014

  http://helpx.Adobe.com/Dreamweaver/using/whats-new-2014.html

  What's new in October 20141 CC & February releases

  https://helpx.Adobe.com/Dreamweaver/using/whats-new-2014-1.html

  New features of CC 2015

  https://helpx.Adobe.com/Dreamweaver/using/whats-new.html

  Nancy O.

• E7440: Audio Jack does not detect all connect more

  Hi all

  I am reported a strange problem. I use E7440 with Windows 7 64-bit with Realtek HD Audio driver (as shown below). My computer also has 'AUDIO DELL' management utility.

  

  Previously, external headphones and portable speakers were working well and whenever I used to insert the pin code of my headphones into the audio jack, a small pop-up used (from the utility DELL AUDIO) used to make appear to select the type of device, I just inserted.

  What happened was, as usual, I inserted the headphones and the popup appeared. I somehow click outside (or closed the popup window) without selecting the device type. Since then, whenever I re - insert the PIN in the audio jack, it behaves as if nothing had happened.

  I tried to fix it by the following methods, but always the same problem.
  -Inside the DELL AUDIO utility, there is an activation or deactivation pop up under the menu option "Advanced > Jack Information." I tried to switch it, thinking that he can reset the pop-up.
  -Inside the DELL AUDIO utility, there is an option to restore the default settings in the menu "Advanced > Restore Defaults. But it also did not help.
  -I uninstalled my audio driver from Device Manager. During the restart of the computer after the uninstall, it automatically installed the audio driver again. Once I did, my speakers have also exploded. In other words, no sound of two internal speakers laptop no audio jack. I had to restore my computer to one of the restore points to undo this uninstalling the driver and reinstalling.
  -I also tried update utility DELL AUDIO via the utility "update DELL client system. But it seems that this utility has some problems too, as ever, he proceeded as planned. I had to do a system restore to restore my computer on track.

  Current situation is the internal laptop talk work very well and any plugin for the audio input jack is not pop - up (to select the type of audio device) while the DELL AUDIO has the option to display the pop-up windows when a new device is inserted.

  I have not checked in any other operating system yet. But I'm sure it's the problem of the DELL AUDIO utility.

  Any guidance will be much appreciated by me and the people around me, who have to listen to my stuff because of this problem of the audio input jack.

  Best regards
  Junaid

  Hello. We have a lot of posts this year on taking undetected on laptops Dell with Realtek audio. I suggest that you try to install the native Windows audio driver. The method is similar to what you were doing when you uninstalled the realtek driver.

  Open Device Manager (type devmgmt.msc in the search box), and then expand "audio, video and game controllers".

  Right-click on "Realtek High Definition Audio", and then select uninstall. This time, put a checkmark in the delete files optionand then on ok. When you restart, Windows will install its own native driver or another driver Realtek if there were other versions on the hard drive. Then go back to Device Manager and look for a Realtek driver. Keep the uninstall & reboot (removing the files each time) until Realtek no longer appears under controllers of noise. Finally, you will see "High definition Audio Device" (native Windows driver) instead of "Realtek High Definition Audio"

  Must work with this driver. If it's not, and if you are still under warranty, report the problem to technical support.

  If the Jack is working, then next download and install a new copy of the driver Realtek. The Audio from Dell Manager is really a truncated version of the Realtek Audio Manager. I don't know, but you might get a new copy of the Audio Dell Manager with the new copy of the Realtek driver. The actual address of Realtek Audio Manager has better controls for the headphone jack, but apparently we can't get it in a Dell laptop.

  If it still doesn't work then try a driver directly from Realtek website. (Return to the native Windows driver each time before trying any different Realtek driver.) You can try the Dell offer and the Realtek drivers.

• rear audio Jack does not not HELP!

  Hey im currently on windows vista, my front audio jack is broken on my compaq presario CQ3040AN because my friend is triggered on a Jack already plugged into it. I think that part of the Jack may have violated in there, causing the computer always recognize something hip and I am trying to use the back entrance, but it does not work.

  is he still taking on reading taking back and if so is there a way to disable the front to operate the back?

  Help!

  Timm

  Hello

   
  If you are comfortable to open the CPU Tower and disconnect the wiring for the front cable which goes from this Jack to the Audio card, you can go ahead and perform the same. You can also contact the manufacturer of the computer for support.
   
  I hope this helps!

• None of my audio jacks do not work. Front and back (office)

  Recently, I connected my desktop computer for an amp with an attachment to a rope to get sounds. It's a beefy amp and I don't have all the sound cards in addition to that on the motherboard. After that I connected and discovered, he did not. No audio jacks working now and I reinstalled Realtek HD Audio Manager twice and no solution. How can I fix this to get the worksheets?

  Hi MitchellCochran,

  1. have you disconnected the amplifier on the computer and still there is no sound on the computer?

  2. you receive a message on the audio device works is not on the computer?

  Method 1

  Check and make sure that the correct audio device is set as default.

  (a) click the Start button and then click Control Panel. In the search box, type sound, and then click sound.

  (b) click on the read tab, and then look for audio devices. These appear as icons of the speaker and are labeled as speaker, track of the names of the devices.

  If you have multiple devices, the default device has a check mark next to it and is labeled as default value.

  (c) if the wrong audio device is listed as default audio device, click the correct audio device, click set as defaultand then click OK.

  Change the audio device may require that restart you your computer.

  Method 2

  If fails it above step then check out the link below and run the troubleshooter of audio playback, check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• Alienware x 51 R2 before audio Jack does not

  After I upgraded to Windows 10 does not have the front audio jack and it detects that no helmet dell has no drivers on their website for my PC. Any help is appreciated

  Simply reset alienware audio to the default settings and rebooted my computer. Now everything works.

• I have some problems with a ONE_TO_MANY relationship, can not insert the record

  I have some problems with a ONE_TO_MANY relationship:
  
  Imagine the following entities:
  
  -J' have an operational entity with a relationship to workers one_to_many something like:
  

  @SecondaryKey(relate = Relationship.ONE_TO_MANY,
      relatedEntity = Worker.class)
      private Set<String> workers;

  -The category of workers is a simple annotated entity.
  
  
  Now, I want to do the following and I get the error:
  
  -Create a bunch of tasks
  -Insert tasks into the entitystore
  -create a set containing all the tasks of primary key
  -involve workers to tasks
  -Insert the task in the database
  
  
  The above procedure works fine, but when I try to associate the same set of workers with another task I get an exception like:
  

  com.sleepycat.je.DatabaseException: (JE 3.3.75) Could not insert secondary key in persist#Sample#sample.Task#workers OperationStatus.KEYEXIST
          at com.sleepycat.je.SecondaryDatabase.insertKey(SecondaryDatabase.java:887)
          at com.sleepycat.je.SecondaryDatabase.updateSecondary(SecondaryDatabase.java:807)
          at com.sleepycat.je.SecondaryTrigger.databaseUpdated(SecondaryTrigger.java:42)
          at com.sleepycat.je.Database.notifyTriggers(Database.java:1735)
          at com.sleepycat.je.Cursor.putInternal(Cursor.java:1368)
          at com.sleepycat.je.Cursor.putNoOverwrite(Cursor.java:498)
          at com.sleepycat.persist.PrimaryIndex.put(PrimaryIndex.java:366)
          at com.sleepycat.persist.PrimaryIndex.put(PrimaryIndex.java:315)

  Can someone please clarify what my problem is and where I should change for this case study work?
  
  Thank you

  The above procedure works fine, but when I try to associate the same set of workers with another task I get an exception like:

  The table in this javadoc should help. Please think about whether they are 1 of many, many 1 or many is the appropriate link.

  http://www.Oracle.com/technology/documentation/Berkeley-DB/je/Java/COM/Sleepycat/persist/model/SecondaryKey.html#relate)

  -mark

• MacBook pro mid-2009 can not insert disc in the drive

  I can't insert a floppy in the drive of my Macbook Pro mid-2009! It's a s if there is a disc already inside - something is it prevents insertion of entirely.

  I've tried several "cures" I found on the net - one of them worked for a short period but now the problem is back.

  The guys at the genius bar in an Apple store have seen this problem so often, they got some field tools rush this opening and get in and out drives. If who disobeys, they can take in the back and open it to fold the skin of the player, fitness and clear of the issue.

  You an appointment for an assessment is free, guaranteed, or rear. In general, if they can solve this problem in less than a quarter hour without spending coins, there is no charge.

• virus wiped out my audio device can not find device manager on computer not where

  virus wiped out my audio device... cannot find device manager on computer anywhere... all said that it works correctly

  Hello

  Please go to the Microsoft Community Forums.
  Because the question is not clear, please answer these questions, which will help us to help you best.
   
  1. you are unable to find the audio device in Device Manager?
  2. are you unable to access the device on the computer Manager?
  3. What do you exactly mean by "everything that says it's working properly"
  4. do you get an error message?

  Method 1:
  I suggest you to download and run Microsoft Safety Scanner and check if it helps:

  Reference:
  http://www.Microsoft.com/security/scanner/en-us/sysreq.aspx
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
   
  Method 2:
  Check out the link and follow the steps in the article:
  No sound in Windows
  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  If the problem persists, please write to us with the answers to the questions above so that we can better help you.

• Audio Jack does not work after update bios

  I'm not able to use my my helmet after I've updated my BIOS and driver audio audio codec IDT high definition.

  I have a probook 4440 with windows 7 (64 bit) OS. Help about my problem?

  Hello:

  The only suggestion I can offer is to perform a hard reset of the laptop.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=376999&prodTypeId=321957&prodSeriesId=376999&ObjectID=c01684768

  Paul

• burn mp3 to CD audio files, can not put all the files in the 1 disc,

  I am trying to burn mp3 to CD audio, if I choose audio CD, some how when I drag the file in the burn list, it's auto show 1 file in a single disc, how can I put all files on 1 disc? If I choose the data disk, so I put all the files in the 1 disc

  In fact, when you copy MP3 files as such, it is written as such, in digital format. In other words, the size of the file is important here. Depending on the size of CD, 650 MB to 800 MB, you can add files only up to the storage capacity of the CD.

  In the case of the audio CD, the data is written in analog format (as a cassette tape or gramophone record). In other words, in the present case, the duration of the file audio issues. The capacity varies between approximately 74 minutes to 90 minutes, respectively.
  Because each file is 50 + minutes, as stated in your post, it is normal to restrict a file per CD, such as the capacity is 74 minutes to 90 minutes. If you use the MP3/WMA format instead, you can put all the files in a single CD.
  Answer if your problem is not solved.

• Dreamweaver server behaviors, can not insert data into the database

  Hi, I tried to use server behaviors to add registration information in my database in my registration page.

  (1) that I created a login page, and it works very well. This means that connections and the connection works fine database so it can match the record in my database.

  (2) but when I tried to download the news in the form of database, it does not work. When I clicked on the service behavior to double check the action "insert data", it always jumps the error message: "When executing inspectserverbehavior in InsertRecord.htm, a javascript error occurred."

  I copied my code below. Except the form code and a little jquery is written by me, most of the code generated by Dreamweaver.

  <? php require_once('Connections/MAMPPRO.php');? >

  <? PHP

  If (! function_exists ("GetSQLValueString")) {}

  function GetSQLValueString ($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")

  {

  If (via PHP_VERSION < 6) {}

  $theValue = get_magic_quotes_gpc()? stripslashes ($TheValue): $theValue;

  }

  $theValue = function_exists ("mysql_real_escape_string")? mysql_real_escape_string ($TheValue): mysql_escape_string ($theValue);

  Switch ($theType) {}

  case 'text ':

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "long":

  case "int":

  $theValue = ($theValue! = "")? intval ($TheValue): 'NULL ';

  break;

  case "double":

  $theValue = ($theValue! = "")? doubleVal ($TheValue): 'NULL ';

  break;

  case "date":

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "set":

  $theValue = ($theValue! = "")? $theDefinedValue: $theNotDefinedValue;

  break;

  }

  Return $theValue;

  }

  }

  $editFormAction = $_SERVER ['PHP_SELF'];

  If (isset {}

  $editFormAction. = « ? ». htmlentities($_SERVER['QUERY_STRING']);

  }

  If ((isset($_POST["MM_insert"])) & & ($_POST ["MM_insert"] == "Register_Form")) {}

  $insertSQL = sprintf ("INSERT INTO"user identity"(Ui_LastName, Ui_Email, Ui_FirstName, Ui_Password) VALUES (%s, %s, %s %s)", ")

  GetSQLValueString ($_POST ['Register_Firstname'], "text").

  GetSQLValueString ($_POST ['Register_Lastname'], "text").

  GetSQLValueString ($_POST ['Register_Email'], "text").

  GetSQLValueString ($_POST ['Register_Password'], "text"));

  @mysql_select_db ($database_MAMPPRO, $MAMPPRO);

  $Result1 = mysql_query ($insertSQL, $MAMPPRO) or die (mysql_error ());

  $insertGoTo = "LoginSuccessful.php";

  If (isset {}

  $insertGoTo. = (strpos ($insertGoTo, '?'))? « & » : « ? » ;

  $insertGoTo. = $_SERVER ['QUERY_STRING'];

  }

  header (sprintf ("location: %s", $insertGoTo));

  }

  @mysql_select_db ($database_MAMPPRO, $MAMPPRO);

  $query_Recordset1 = "SELECT *"IDENTITY of the user;"

  $Recordset1 = mysql_query ($query_Recordset1, $MAMPPRO) or die (mysql_error ());

  $row_Recordset1 = mysql_fetch_assoc ($Recordset1);

  $totalRows_Recordset1 = mysql_num_rows ($Recordset1);

  ? >

  <! doctype html >

  < html >

  < head >

  < meta charset = "UTF-8" >

  Registeration < title > < / title >

  "< link href="jquery-mobile/jquery.mobile-1.3.0.min.css "rel ="stylesheet"type =" text/css">

  "< script src="jquery-mobile/jquery-1.8.3.min.js "type =" text/javascript"> < / script >

  "< script src="jquery-mobile/jquery.mobile-1.3.0.min.js "type =" text/javascript"> < / script >

  < / head >

  < body >

  < div data-role = 'page' id = "registrationpage" >

  < div data-role = "header" >

  < h1 > welcome!    < / h1 >

  < h1 > register yourself! < / h1 >

  < / div >

  < data-role = 'content' div > < / div >

  < do action = "<?" PHP echo $editFormAction;? ">" method = "POST" id = "Register_Form" name = "Register_Form" >

  < p >

  < label > Email < / label >

  < input name = "Register_Email" type = "email" required id = form register_email = "Register_Form" title = "Register_Email" >

  < label > < br >

  Password < / label >

  < input name = "Register_Password" type = "password" required id = form register_password = "Register_Form" title = "Register_Password" value = "" >

  < /p >

  < p >

  < label > name < / label >

  < input name = "Register_Lastname" type = "text" required id = form register_lastname = "Register_Form" title = "Register_lastname" value = "" >

  < label > < br >

  First name < / label >

  < input name = "Register_Firstname" type = "text" required id = form register_firstname = "Register_Form" title = "Register_Firstname" value = "" >

  < /p >

  < name of entry = "MM_insert" type = 'submit' form 'Register_Form' value = 'Registration' = >

  < input type = "hidden" name = "MM_insert" value = "Register_Form" >

  < / make >

  < a href = "index.php" data-role = "button" > return to connection < /a > "

  < div data-role = "footer" >

  footer < h4 > < / h4 >

  < / div >

  < / div >

  < / body >

  < / html >

  <? PHP

  mysql_free_result ($Recordset1);

  ? >

  Finally I found the problem.

  It seems in my setting, MAIL does not work in live mode DW. But if moved to any explores, it works fine.

  Adobe really needs to improve its management of PHP.

• ORA-01776: I can not insert a view consisting of two tables

  Hello:
  
  I'm doing an insert on a view composed by the join of two tables (services and employees) and it failed.
  
  The view is the following:
  
  CREATE OR REPLACE FORCE VIEW 'EMPDPTO' ('EMPLOYE_ID', 'LAST_NAME', 'EMAIL', 'HIRE_DATE', 'JOB_ID""DEPARTMENT_ID","DEPARTMENT_NAME") AS
  (
  SELECT employe_id, last_name, email, hire_date, job_id, d.department_id, department_name
  E employees, departments d
  WHERE e.department_id = d.department_id
  );
  
  
  My insert command
  
  INSERT INTO empdpto
  VALUES (743, 'Bermejo', '[email protected]', 12 December 09 ', 'IT_PROG', 10, 'Administration');
  
  get an ORA-01776: it is not possible to modify more than one table of base through a union to join.
  
  
  On the other side, I saw in the documentation which, in certain circumstances, can do an insert on a complex view.
  
  Is it possible to do an insert on a view consisting of two tables? Under what conditions?
  
  Thank you

  Reference of SQL CREATE VIEW http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_8004.htm#i2065510 views editable Notes section

  >
  If you want a view of join to be updated, then all of the following conditions must be met:

  *

  The DML must assign only one underlying table of the join.
  *

  An insert, the view does not create WITH CHECK OPTION, and all columns in which the values are inserted must come from a key preserved table. A key-preserved table is one for which each primary key or unique key in the base table value is also unique in the view of the join.
  *

  For an UPDATE statement, the view does not create WITH CHECK OPTION, and all updated columns must be extracted from a preserved key table.

  >

  The first condition is not true for the view that you created.

  Edited by: P. Forstmann on 26 Jan. 2010 20:17

• can not insert tray multifunction color HP Laser Jet Pro 200

  I'm working on a double-sided on 8.5 "x 11.0" document. The printer does a fabulous job but I had to insert another stack of documents and when I tried to close the entry door it just stopped in his tracks and hosts about 3 inches. Paper is inserted properly, although it seems to be seated later in the container than the other two I had printed earlier. When I tried to close the door load paper message went away and despite the door being partially open the document continues to print correctly. I am completely baffled. I took the current load of the book several times and then tried to put the drawer, but it stops. I don't want to force it. Even if it's perfectly printing my project, I'm puzzled that it is not an error message. Has anyone else got a happen to them?

  Well, that was fast! Thank you a lot to solve the problem with the ferry to the paper. You were right. I had inadvertently touched this little blue lever and extended the tray without even realizing I had done. Lesson learned.  Thanks again. I hope one day, I'll be able to help some happless users!