Audio Omni 10 HDMI problem

Similar Questions

• Reference Dell 42 '' Plasma W4200HD HDMI - problems

  Recently had my Plasma 42 "mounted on a wall by using tv HDMI / HDMI / STB. Worked fine for 4 days then screen started flashing several times every second. Audio is fine.  HDMI letters appear at the top in the middle of the TV. Already have cable HDMI/DVI tv box without problem but decided to simplify and go all right HDMI. I had tv for 3 years, works very well so far. Is this typical HDMI problem with this model of tv?

  
  

• The conclusion for M - Audio MobilePre USB driver problem

  The conclusion for M - Audio MobilePre USB driver problem

  Use: iMac

  OS: El Capitan 1011.2

  The latest driver I could find was 1.8.1.

  Error message:

  Installation failed - Setup could not install the software because there was no

  available software

  I would use this hardware with Final Cut ProX 10.2.2 and Garageband 10.1.0.1

  A quick search seems to indicate the latest version of the driver to be 1.2.1 - there was no 1.8.1 I could find. It has been out for more than a year, so no mention of El Capitan, but it could work. I'll make sure that you have the right to download and try again.

• Message that "support virtual bluetooth (including audio) has a driver problem"

  I have a message "virtual bluetooth support (including audio) has a driver problem. How to rectify the Pls?

  [Moved from the community centre of Participation]

  Hello

  1. What version of Windows is installed on the computer?
  2. When you get this error message?
  3. Were there recent changes made on the computer before the show?

  I suggest you install the latest drivers from the manufacturer's website and check if it helps.

  For instructions on how to update the drivers, see the suggestions of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  Thank you.

• Bluetooth hands-free audio has a driver problem.

  My HP g6-1d70us running on 64-bit windows sound 8 just stopped working after it has been switched off.

  When I move my mouse to the speaker icon in the taskbar, it displays the message "no audio output device is installed".

  When I run the troubleshooting, it says "Bluetooth hands-free audio has a driver problem.

  Please, what should I do?

  Hi felixchip,

  I think you have a problem with the hardware at this point with the map his and your case it is a card that is integrated directly into the motherboard. I would recommend that you have someone take a look at the hardware store. You can call HP Total Care at 1-800-474-6836 in North America or Start here if you live outside of North America.

• Laptop HP Pavilion 15 t W0P57AV: Audio HDMI problem

  I have a new laptop that I just got ordered directly through the HP site. I plug the HDMI cable and plug the cable on my TV and I get no sound on my TV. I already have a click with the button straight on the volume icon and selected playback devices and there is no device audio high definiion listed. I also have a click right and select Show Disabled/switches and nothing appears.

  How is it possible to have a new laptop with no Audio HDMI capabilies? Help, please. I tried to figure this out for days.

  Hello:

  See if reinstalling the Intel HD audio driver and restart the PC solves the problem.

  The graphic driver install the HDMI audio driver.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  http://ftp.HP.com/pub/SoftPaq/sp76501-77000/sp76613.exe

• No audio signal through HDMI (dv9700t CTO)

  HP Pavilion dv9700t CTO Entertainment Notebook PC / Windows Vista 64-bit

  I put the audio device by default for the device "Realtek Digital Output. I have no sound.

  I've updated the audio drivers on the HP support site. Still no sound via HDMI. (the microphone quality was reduced at the point of being worthless)

  I have updated the drivers with drivers from the site Web of Realtek. Still no sound via HDMI. (I found micro feature)

  The box of bolt that I'm trying to connect to indicates that there is no audio signal passed him from this source (my laptop). I even tried to connect directly to the tv. Which doesn't work anymore.

  Its almost as if there was no link between the audio and HDMI port.

  

  Message edited by Slybo on 12/23/2008 06:22
  Message edited by Slybo on 12/23/2008 06:24

  I have dv9758ca and I have the same problem. No sound with the yamaha receiver. I sound with my LG TV and I tried with an Onkiyo recevier and it worked.

  Once I had the sound on the yamaha (was a flook). the image was running on the TV and the screen of the computer (which is not normal) at the same time. then I concluded that the problem is the HDCP protection. the yamaha recevier is HDCP.

  I've still did not know what the solution is, I just wanted to share my experience

• Dolby Digital Audio output via HDMI on Satellite A200 cable?

  I don't see how to get a Dolby Digital signal on my laptop!

  I have a screen LCD HD 1080 p television. With the help of a cable HDMI from laptop to TV gives a beautiful image. I then use an optical link between TV and Surround amplifier... However the amp does not recognize the signal as a Dolby Digital signal.

  The record is not clear on issues of Audio. The Toshiba HD-DVD player shows Dolby Digital option and I guess that's out put down the HDMI cable? I hear through the TV speakers.

  Hints would be much appreciated.

  Concerning
  Paul

  Hello

  To be honest I didn t know that there is Satellite A200 laptops with HDMI output. Can you please tell me what A200 you have (A200-xxx)? Are you really sure have an A200?

  Back to your problem: as far as I know the Digital Dolby audio can be sent if the laptop has S/PDIF port. You must also use an optical cable and connect laptop to your amp directly.

  What you do now is send the signal to the TV only. I don't really know if you can browse the Dolby signal to the amp.

• Audio Lenovo 3000 n500 problem

  Hi all

  First of all I would like to concratulate you for the hard work and great, you've done so far.

  In any case, I bought lenovo 3000 n500, which comes with vista basic but popular programms many compatibility problems so I desided to install xp.

  The problem I encounter has to do with audio. the conexant program cannot find my audio, so I can't hear any sound.

  Moreover, I get an unknown pci device which should be my modem (conexant too).

  Is it possible to fix this; Thanks in advance.

  PS there at - it software like ibm control centre (Centre of health if I remember) for lenovo;

  Finally found the solution! It was audio hdmi intel. Everyone can choose to install it manually from the graphics driver intel

• No audio playback on HDMI

  Coonect my pavilion dm4 by HDMI to a monitor of 23 ". No sound on video playback. Using Windows 7. Help, please.

  Hi HoSteven,

  Welcome to the Microsoft community. According to the description of the problem there is no audio over HDMI.

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  I'll help you with this problem. Follow these steps:

  (a) click Start, Control Panel, sound.

  (b) go to the playback tab.

  (c) select the HDMI device and set it as default value. Click OK.

  You can read this article for more information:

  HDTV: Frequently asked questions

  I hope this helps. Let us know if you need help with windows.

• How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

  I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

  Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

  Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

  Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

  I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

  It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

  My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.

  

• IDT High Definition Audio CODEC (NO SOUND PROBLEM)

  My PC Info is:

  Manufacturing: Hewlett-Packard

  Model: HP EliteBook 8460p

  Rating: 5.3 Windows Experience Index

  Processor: Intel (r) CPU of Core i5 - 2520M 2.50 GHz 2.50 GHz

  Installation of memory (RAM): 4.00 GB (2.98 GB usable)

  System type: 32-bit operating system

  Pen and touch: no pen or press enter is available for this view

  Windows 7 Professional

  Product ID: 00371-OEM-8992671-00008

  Problem: I was watching a movie one night before I cut and I forgot to turn on my laptop, today I discovered that the sound does not work, then I tried to restart and still without hope, I tried to disable and don't allow the IDT High Definition Audio CODEC and still no hope, windows says that this device is working properly , but oviously it's not I really need help, I don't know what it is advanced technology, so im helpless.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  FTP://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59291.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Only start the laptop and let Windows load completely - it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Common modules on Windows 7 x 64 and HDMI problems

  Jin
  1.), I want to run my remote, hotkey utility, and so one on my Toshiba Satellite x 200 - 22v. But... I can't find common Modules for 64-bit (even vista) version, I installed the utility Hotkey for XP on this seven and it works because of the absence of EBlib.dll (which I can't find at Google to download).

  2.) my HDMI has stopped working - I watch a HD DVD movie and TV appears black, graphic turns his back on the laptop screen and there is no more - TV this one and others. Cable HDMI and entrance to the TV factory (PS3 connected to try). What will happen? HDMI broken phone?

  1)
  Common modules as a tool exist separately for Windows XP Home edition only, and you cannot use it to Win7. For Win7, you use package of added value.
  The most important part of this package is components Toshiba driver common. It's something like the common modules for Windows XP Home edition.

  2)
  It is not easy to get the right answer. Just restart your laptop and try it again. If the problem persists, try to test on a few other TV to see what will happen.
  Post the results and let's see what may be the next step to solve this problem.

• Quality image 23EL933G HDMI problem

  Hello!

  I bought recently this TV, im really happy with the performance using VGA, DVB,... but when I plug my laptop using hdmi, image (resolution of 1920 x 1080) port is a bit "fuzzy", the definition is far from great.

  Is this normal? What I am doing wrong?

  Thank you!

  Have you tried to contact your laptop manufacturer and request explanations?

  Why do you think problem is TV? You have too much for Toshiba laptop?

• Audio transmission of HDMI to SCART on Toshiba REGZA TV 46SL863

  I have a Toshiba REGZA TV 46SL863

  I use a home theater 5.1 for audio from the TV via a port SCART (only possible connection)

  However, when I receive a signal via HDMI (my ps3) I can't get the sound to play on the home theater. The question is:

  * Is it possible to transmit the audio signal from a digital source to the SCART? *

  If not, what devices should I buy for those who do? Unfortunately, my 5.1 only accepts entries via a port SCART...

  Hmm I never tried this link, but I guess that it is not possible to mix digital and analog signals.

  In my case, I connected the PS3 directly to my HiFi receiver.
  PS3-> HDMI-> HiFi-> HDMI--> LCD

  and generally it s common way how such device must be connected.