audio spectrum moves do not

Similar Questions

• Not first 2015.3 no audio in MOV files

  I have an existing project from 2015 first with MOV files in it. Everything was good in the world until that blasted creative cloud persistently told me to go to 2015.3 so I held. After the upgrade to the first 2015.3 decided not to move the audio in MOV files. I installed Quicktime. And as said before everything worked fine in the previous version of first. I tried to use Media encoder to change the type of file, but it doesn't recognize too much audio in MOV files. What gives Adobe?

  Hi bubbachubby,

  Rampage files cache media to solve this problem.

  FAQ: How to clean the files hide media

  Thank you

  Regalo

• Audio spectrum is not updated to Audio comp

  I have a project that involves a spectrum of audio, the audio of a model. In this model, I have several audio files that I want to change. However, when I do, the audio spectrum does not refresh. Is there a button I need to press a place to force the spectrum to put up-to-date?

  Try to purge the memory & cache.

• Audio spectrum effect works is not the rendering of audio effects

  The Audio Spectrum effect seems to work on the rendered audio effects.

  For example, I have a very simple model with 2 layers:

  1. A solid including the Audio Spectrum effect
  2. An audio file referenced by the Audio spectrum

  The audio spectrum works as expected with the audio file, however, when I apply a ' Audio > tone "to the audio layer (which completely changes the waveform), the spectrum Audio sound effect changes at all."  I tried motorhomes audio layer to cook in the effect of the tone, but results are inconsistent, as the RAM first look seems to work, but then any changes made to the demo seems to have no effect.

  Are there other ways to do (other than export the audio file, which is too rigid of a workflow), or perhaps an audio made flag any miss me?  THX.

  Thanks for the reply, although purge the cache of the images didn't work.

  Before, I was already composing, but any changes made to the demo did not if register on the Audio spectrum in the main computer, and unfortunately, purge the cache of the images did not work.  But it made me think how cache for audio may differ from the image being cached internally within AFX, so I tried purge 'All memory'... but that no longer works.

  However, a "Disk Cache" purge worked (although it takes much longer).  I'm guessing that he may have something to do with the way that audio is staged in the Disk Cache RAM Preview?  Anyway, it's a little tedious workflow of having to constantly purge disk cache after each change of the effects on the audio, but it's certainly better than every time the export of audio files.

  I hope it's one of those issues that gets patched on the line.  Pointing me to a kind of purge helped well, so thx for the comments!

• Audio keyframes don't move do not

  Hello-

  Been charged the research in these forums, in vain, to see if the following is possible (or more likely, what I'm doing wrong):

  Move my audio (as well as my video) to the bottom of the timeline a bit and have (audio) keyframes move with it.

  What I do exactly is:

  -Select the timeline, and Ctrl-A (select all)

  -Then, click my mouse on the selected area and drag and drop a little media to the bottom of the timeline

  -All media moves very well, BUT in my A2 audio track keyframes don't move

  Video key I move very well.

  Track keyframes is currently extracted audio on A2. I tried to select the keyframes of the elements, but no difference when moved. the keyframes remain in the same original place.

  It is even possible to do what I have to do... or do I have to redo my keyframes manually as the keyframes of the elements?

  what I have to redo my keyframes manually as the keyframes of the elements?

  Well Yes.

• Help with an Audio Spectrum custom, as I do

  So the plan, I want to do something like this:

  but to do that I need to use the sound keys (which I have) and I don't know how to use it very well so please keep things simple when you reply.
  So, with sound keys, I can make rectangles move to the rhythm of music as here (does not use the audio spectrum in this vid and duplicate, to hear me) they make solid layers of rectangles and make move upward and down to the rhythm of music using the beaches, I know what as the beaches that I need to use in sound keys , but I don't know how correctly do the job of scaling. When I hang up on the scale of the rectangles with the music, it affects both sides, people have said, you must move the pixels rather than scale, then how can I, when I plug it it ends up being extremely small (the rectangles) so I need help to solve these two problems, so please help me don't forget I'm a noob and have no idea how to use equations and stuff. Thank you!

  You need to move the anchor point for your rectangles on one side or the other, so that, when they scale, they will appear only in one direction.

  If you are a "noob", you should really start here: getting started with After Effects. The resources in this link will start your own in a way that will make you able to come up with such things.

• DriverMax update drivers. Among the updates was for audio and subsequently did not sound. Soundcard (?) is Realtek AC97 Audio, XP Pro 32 bit SP3

  original title: no sound

  I used drivermax (for the first time) to update the drivers. Among the updates was for audio and subsequently did not sound. I tried to restore to a date backup earlier, but without success. My soundcard (?) is Realtek AC97 Audio, XP Pro 32 bit SP3

  Bad move!

  PC manufacturers sometimes 'tie' in the drivers for their machines so that the only reliable method to update either directly through their Web sites. DriverMax will detect your audio device and go to Realtek to obtain the driver. Not the solution, unfortunately

  MS Update also not as he says, is up to date...

  Go to the website of the manufacturer of the PC/laptop and find the support page for your machine. Download the audio drivers from here and install it.

  If it is a machine that you have built yourself, go to the website of the manufacturer of the motherboard and do the same thing from there.

  See you soon,.
  Jerry

• Cuts of audio spectrum?

  Hello, I made this part of the audio spectrum based on a tutorial... I had decided to enlarge a little ghosts, but when I did at some point, they would have cut, I was play with everything and can't find anything, it not there no other discussions that have answered or solved the problem.

  You simply see normal effect behavior. Your magnifying glass effect simply compresses peaks as you reach the edge of the RADIUS because it simulates a curved lens where it happen also. You should moderate your settings in order to avoid it or use other effects.

  Mylenium

• Exporting audio mixer effect is not to the final video.

  I had a problem in the last month. When I do a mix using the mixer Audio Panel to apply the effect of amplitude "Multiband Compressor" to a channel and the "dynamic" on the channel master, everything works fine and I can get a clean mixture in the sequence with voice and music with 20db of separation during live play. For example, the track VO is about - 2 dB. The music is - 20 dB or less Ch2 on.

  But If I now export the sequence into mp4 H.264, it seems the audio effects of layers are not rendered in the audio track or levels are reduced by - 7db at-10 dB. If I export the movie as a mp4 and report audio VO first raises around from - 9 dB and the music-20db. The music is invading the VO. So, I thought maybe the problem is that the effects of channel of the audio mixer Panel are not rendered in audio tracks.

  So I started to do some tests, If I have the same sequence of export in "Preset" H.264 Vimeo and then export to ProRes of Apple Quicktime mov audio is completely different levels. I have no idea why. Here is a screen shot of the same sequence, with compressor on, exported and re-imported in the mp4 and .mov.

  

  Same sequence exported as mp4 AAC 320kb

  

  Then exported as uncompressed audio file.

  

  Any other test I can do. This is confusing me.

  Thank you

  
  Dave

  Do similar tests with 1 k tone would be useful, you would have then exact db number to work with.

• How can I synchronize a new track to the audio spectrum, effects and audio amplitude logo

  Hello!

  How do I paid recently a graphic designer to create a sound model for my music on youtube channel, but the problem is that I do not know how to synchronize a new track to the audio spectrum, the effects and the logo of the audio amplitude (pumps logo to the sound of the track that he gave me in the layout) but I would like to synchronize it instead of a new track at all. [Please help:]

  Click on the tab "LOGO of MOUNTAIN" or double-click the color icon in the Panel layer to open the publication.

  Import the audio file in the project Panel.

  Click on the new audio file in the project Panel to highlight.

  Click on the 'old' audio file in the Panel layer to select it.  (they are both put in evidence now)

  Now, hold down the 'Alt' key and then drag the new audio file of the project on the old audio layer panel in the layer panel.

  Doing it this way will automatically do all necessary connections to the old file to the new file.

  Or... you could just drag the the new audio tracj in the Panel layer compositions 'sound '.

  Select the solid layer that has the applied Audio Spectrum effect.

  Then in the Audio Spectrum effect setting pane, find the list at the top of "Audio Layer" drop-down list, click the menu drop-down and select the new audio layer.

• Audio spectrum remains flat

  Hello

  I have AE CC 2014 and I am trying to create an audio visualization. However, the audio spectrum is flat. I have previewed RAM it - audio works, but the spectrum would still not work. I tried different audio files (mp3, wav, aiff...) neither of them could work. All solutions?

  Thank you very much

  

  No such thing s a stupid question.  You assigned the audio layer in the effect settings?

• Try to resolve the issue of the audio spectrum (analog waves) endpoint.

  Hello, I created a spectrum audio wave (a wave analog face) in After Effects, you see in the image (the right end of the wave), the ends of the wave are detaches the nodal point (middle) of the spectrum and my goal is to keep each end attached to the note.

  

  You double your audio layer modify a copy to get the frequencies you want to drive Audio spectrum and use the other for audio.

  This is your solution.

• Reduced summer of audio spectrum

  

  My Audio spectrum is sawn because it crosses boundaries. Is there a way to extend its limits, then he would not be cut? [Photo]

  It turns out that the positions of your effects are related to measures of the size of the layer.

  Instead of changing the solid, you can try the CC Repetile effect.

  CC Repetile before your AudioSpectrum effect, and then add an amount of padding to enable the effect appears.

  Here are some resources for forums helpx Adobe Cycore effects: using After Effects | Animation and effects presets overview

• Need help with Audio Spectrum Max Height!

  So I have an audio spectrum I want to stop when it gets to a certain height in the computer and not just go on the top and out of sight.

  I thought maybe I could do layer that covers the audio spectrum, but not the other objects in the model.

  Any help?

  Here's and example of what I mean

  https://youtu.be/yiqznDG-uE0?t=25s

  At roughly 0:27 you will see the stops of the spectrum at a certain height and go any higher.

  Snap out with a mask or a linear wipe.

  Mylenium

• Breeze Presenter 5 - Audio import works is not in windows 7

  Hi all

  We currently use presenter Breeze 5, audio import feature does not not in the machine of windowns 7. But it works fine in windows XP machine. Can someone help me on this page or any suggesstion?

  Thanks in advance

  Sajjad.

  Well, there is no such thing as the Breeze or Breeze presenter. The products were renamed years to Acrobat Connect Pro and Adobe Presenter. Acrobat Connect Pro 8 is purchased as a hosted service or your own server. Adobe Presenter 7.07 is the last and Adobe Presenter 7.05 was the first version to support Windows 7. We recommend 7.07 as the latest version and you can buy this version. I don't think there is a upgrade price to move from 5 to 7. You would have to buy version 7.07 presenter.