Audio keyframes don't move do not

Similar Questions

• Satellite M40x Audio CDs don't play do not

  Hello

  The player will play DVD but not Audio CD it just stopped while I was copying into iTunes. When you put an audio disc you hear that it begins to spin but just gently snaps.

  Alan

  Hello

  I've read some articles that sometimes drives has a problem to read the s copy audio CD due to DRM (Digital right management).
  The iTunes files supports this option and I know you can use these files with the iPod.
  Well, it s my suggestion. But if you want to be 100% sure, you should check the CD to other readers. If it doesn't work, so it s a DRM issue

  Good bye

• Does anyone know why audio keyframes do not work in PE13?

  Does anyone know why audio keyframes do not work in PE13? I put in a track audio and changed levels, but audio playback remains constant. Oddly enough, even the level of volume (in settings-> Volume slider) moves from top down during playback of the clip. But the same audio output is completely unaffected. Weird.

  marioj

  On what computer operating system is your first items 13 running? Have you updated to the 13 to 13.1 yet? If this isn't the case, please do.

  Assuming you are not a misinterpretation of the workflow for keyframing property of volume at the level of the timeline or tab/adjustments volume pallet/expanded, please remove the file Adobe Premiere elements Prefs (configuration file). For the elements first 13/13.1 on Windows 7, 8 or 8.1 64-bit

  Local disk C

  Users

  Owner

  AppData

  Roaming

  Adobe

  First Elements

  13.0

  and in the folder 13.0 is the Adobe Premiere elements Prefs file that you delete. If it does not, then delete the 13.0 the folder in which the Adobe Premiere elements Prefs file exists. Don't forget to work with folder Option show hidden files, folders and disks enabled so that you can see the full quoted path.

  Please review and consider, and then we can decide on what was then based on details in your response.

  Thank you.

  RTA

• Reader superDrive will not read audio CD & DVD of movie most

  Hello

  My SuperDrive eject automatically audio CDs and DVDs (movies) after several hours of spinning and slow down.

  I tried with a data CD (an old CD - RW Archlinux), it goes successfully and appears in the Finder without problem. And I also managed to write to blank DVDs.

  Then recently reset the SMC as explained here: reset of the controller of the steering system (SMC) on your Mac - Apple Support , but it has not changed anything.

  Now, I'm looking for any command line, I can put in Terminal that gives me information about what is happening.

  Is BTW, possible to Flash the firmware of the drive SuperDrive?

  Thanks in advance the Apple community

  Optical drives of old iMac aluminum is, generally, the first piece of hardware to fail.

  Reason, essentially, its orientation in the iMac while exposed to heat internal excessive.

  You could try to clean the disc, by the power of your iMac, unplug power, take a credit card, wrapped in a Microfiber cloth to see if you can get one of the dust and dirt on pushing the fabric in and out movement at the same time (wipe off every time you pull out of the slot) until no more dirt won't come off on the canvas. Reconnect your iMac, start your iMac and try the drive again.

  If it failed, plan B is to purchase an external optical drive.

  The external optical drive made Apple only works with recent Macs who no longer have a disc Super bulit.

  If you need an optical drive that works with your year and model Mac, look at these.

  Not all optical drives are Mac compatible.
  Most Mac compatible hard disks you will find only to buy online.
  Here are two on Amazon.com which are inexpensive and compatible Mac

  _3 http://www.Amazon.com/LG-GP10NB20-portable-External-Drive/DP/B004K2Z4MS/Ref=sr_1 ? ie = UTF8 & qid = 1398883289 & sr = 8-3 & keywords = Mac + compatible external + LG + optics + dr I ve

  http://www.Amazon.com/LG-Electronics-portable-external-GP40NB40/DP/B009DS6OFU/re f = sr_1_7? ie = UTF8 & qid = 1398883289 & sr = 8-7 & keywords = Mac compatible + external + LG + opti al c + reader

  Here's another source for Mac compatible optical drives. What are optical readers of best quality.
  They are also disc loading tray.
  Loading optical drives are more reliable, more they are able to read these small discs of mini sizes.

  http://eShop.MacSales.com/item/OWC/VLU2SD24XS/

  http://eShop.MacSales.com/item/OWC/MR3F82SD24S/

  Good luck!

• Saving audio settings of Windows Movie Maker in the film project file

  I understand how to adjust the volume of my audio track, but when I save the file, in the sound adjustments are not saved.  Is there an extra step in the audio recording?

  Hi Gmamma,

  Try the two methods mentioned below if you don't him have not yet tried and check if it works.

  Method 1

  The audio settings by default in Windows Movie Maker is for the audio portion of imported video and any narration or music that you add to play at an equal level, but you can change that setting if it does not give you the balance that you want. To adjust the audio levels, follow these steps:

  (a) click Tools, and then click Audio levels.

  (b) do one of the following:

  to increase the level of audio on the Audio track that is part of a video clip, drag the slider toward Audio from video.

  II. to increase the level of audio that is located on the audio / music, drag the slider to Audio / Music.

  (c) click on close.

  Method 2

  Adjust the volume of each audio clip individually, as follows:

  1. on the track Audio or Audio / Music of the timeline, select the audio clip that you want to adjust the volume.

  2. click on Clip, point to Audio, and then click Volume.

  3. to adjust the volume, do one of the following:

  ·        To reduce the volume, drag the Audio volume level slider to the left.

  ·        To increase the volume, drag the Audio volume level slider to the right.

  ·        To cut the video, select the Mute clip check box.

  ·        To restore the volume to the original volume, click reset.

  Audio setting in Windows Movie Maker: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/adjusting-audio-in-Windows-Movie-Maker-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible to JUST to play audio in windows live movie maker?

  I want to edit some audio in the new movie maker, which is not nearly as good as when it comes to editing. My problem is that I can't get audio unless it is Visual, which really bothers me. Is it possible to just edit audio? I don't have any other live editing except for movie maker software. Unfortunately, I can't use the old movie maker because it's a straw - who is to import the types of files that he dislikes, such as VOB, MP4 and so on. Help, please!

  There is a way to EXTRACT the audio from the video file. Not sure if it will work forthe publishing of music in a video.

  I use Free Video Converter Mp3. Yes, it's free.
  http://www.DVDVideoSoft.com/guides/free-video-to-MP3-Converter.htm

  I use it myself. It is very simple to use.
  Basically just add the video file in the converter.
  Find and select the folder where will be stored in the MP3.
  Click on convert. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Audio keyframes following snippet first CS6 clip

  Greetings,

  I am currently immersed in a marriage which took me some time to run. After viewing the sequence master edit assembled last night, I decided I want to shorten (extract) a stretch of the walk in initially. I tried to use the function from the program monitor, ensuring that all the tracks have been targeted, and the only problem I have is that audio tracks with automation that does not extract. I have also tried to do a manual razor, cut and remove the unwanted section, then tried with the tool of the track and the move tool. Whenever the track volume automation does not follow the cuts. I wonder if I'm missing something really obvious here. So, to summarize: clips are moving, but the titles(there are several audio tracks with volume automation) do not move in time to match.

  Thank you

  Need not do anything.  Audio keyframes are applied on the slopes, not clips.  So they won't move with the clips.  You will need the keys of the items for this images.

• Support ring moves do not

  I'm up and down each time, but I show nothing in the screen of commands. The ring does not move. Has anyone else had this?

  You get a credit for a stand where, after you have been sitting for a while, you get up and move at least a minute or two. No credit will be given if you get and don't move or sit down in no time.

  If you sit for most of an hour a notification should come to your  watch about 10 minutes earlier to remind you to stand up. If you receive this notification and get up then move for a few minutes you will receive another notice that you have received a credit standing.

  If they do not move try resetting your  look first. Press and hold permanently the digital Crown and the side button until the Apple logo appears on your Watch . Then release the button and let the  restart Watch.

• Audio setting in Windows Movie Maker XP

  Hello! I imported a video with audio from a DVD into Movie Maker XP. The audio of the original source is not very good and I was wondering if it is possible to adjust it in Movie Maker.

  Movie Maker has the ability to adjust/change the audio? If so, how can I do that?

  In Movie Maker, audio editing options are mute, melted
  in, fade, volume and split.

  The volume... with a view to the timeline... right click on the Audio
  follow and choose the Volume on the menu... and then drag the
  Slider.

• Removal of audio background in Windows Movie Maker__

  I am trying to remove the background noise in Movie Maker - I use Vista.  Threads say to highlight the clip, click "clip" at the top, down to audio and there will be a mute, discoloration, the volume option - this area is grey outside and non-functional, so it does not work - what should I do, I checked to see if it's the latest version (SP2), no update does seem to be necessary... but I can't use it!  And can't seem to find an answer here, then perhaps that person has had this problem?

  Hello Shelly,

  I want to clarify if you try to delete the audio clips or try to remove static\noise in windows movie maker.

  If you try to remove\adjust audio of the clip, please follow the steps mentioned in the link below

  Audio setting in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/adjusting-audio-in-Windows-Movie-Maker-frequently-asked-questions

  If the noise is part of the file, he was there when you recorded the video, then there isn't anything you can do to remove it.  That would take the studio type unit to filter only specific frequencies and types of control sounds very high-end.

  Reference

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/654f4bf2-A6FA-4CE6-BDA9-189d684a08c2

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• New Logitech mouse will click, but don't move?

  Hey,.

  My mouse wheel broke, but the function of the buttons and moving still works, so I bought a new mouse (Logitech).

  When I plugged the new mouse in the light came, I could scroll left and right click but don't move.

  I already reinstalled the drivers but it won't work. Also when I tried troubleshooting the mouse he says ' your mouse works correctly with USB 3.0, USB 2.0-move. I did it but I still get the same error message

  I really hope there is a solution soon because I can't play or use my PC correctly without a scroll wheel.

  I hope to hear from the community as soon as POSSIBLE,

  Stephen Darcy

  Hello Stephen,

  For a better understanding of the issue, I would need more information on your side.

  1. How do troubleshoot you the mouse?

  2. the problem occurs on a different computer?

  3. What is the number of the model of the mouse?

  This problem could occur due to these reasons.
  1. missing updates.

  2 conflict between third-party applications.

  3. due to material damage.

  Try the steps listed here and see if it helps.

  Method 1:
  I suggest you to download and install all Windows updates available including optional updates. Check if it helps.

  Method 2:
  If you have not tried hardware store running, I suggest you to run the same and check if it helps.

  a. press the keys Windows + C on your keyboard to show the charms.

  b. type Troubleshooting , and then click solving problems under settings.

  c. now, type Hardware Troubleshooter in the search option.

  d. click convenience hardware store to run the troubleshooter.

  Method 3:
  If the problem persists, I suggest to start the computer in safe mode and check if the problem occurs or not. If the problem does not occur in safe mode, configure the computer in a clean boot state, and check if that helps.

  Step 1:
  I suggest you to return the item and check if it helps.
  Start settings for Windows (including safe mode)

  Step 2:
  If the issue happen not in Mode without failure, perform a clean boot and check. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.
  How to perform a clean boot for a problem in Windows

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  If the problem persists, you can contact the Logitech Support for help on this issue.

  http://www.Logitech.com/en-us/support/support-contactus

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool liquify (photoshop cc 2015): what should I do?

  Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool of liquefy; I can't change the size of the brush or hardness. OS win 7 Professional 64 bit, wacom tablet intuos 6.3.14 - 1 driver s pro, Photoshop 2015 CC worm.  2015.0.1 20150722.r.168

  What are your settings of GPU acceleration?  As I understand it, the Alt right click size and hardness adjust needs acceleration GPU to be turned on, but I have a feeling Brush hardness is always set to easy when using fluidity.  You can still see the quick mask as representation of the soft brush when Alt right click, but you can't change the hardness.

  Is that you can change the brush size and pressure (framed in red in my screenshot) Alt right click drag left and right changes size and down to pressure changes, and you can see what is happening in real-time by looking at the sign on the right.  It works independently of your acceleration GPU (IME) settings, but you don't get the effect of soft red quick mask.

  

  Does this fit with what you see, or you are not able to change things at all?  If not, then I've always found that fluidity consumes system resources, if you could check the Task Manager > Performance tab to see what kind of RAM and CPU use is using the fluidity.  That's what I see after direction the lens above with a big brush continuously for 10 seconds.  Note This is on a fairly quick NLE System.

  

• Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it's not

  Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it does not appear or play on the timeline. I can drag an audio file of Ms on the timeline, but I need audio from my original file to synchronize my audio file recorded independently - used to be no problem... any ideas what I can not edit now?

  Hi Neil,

  Drag / drop may not work if you don't have any enabl; e source patch or did not target the track for the same thing.

  https://helpx.Adobe.com/Premiere-Pro/using/source-patching-track-targetting.html

  Vinay

• Is it possible to add audio keyframes to a source clip in the source monitor?

  Hello, is it possible to add audio keyframes to a source clip in the source monitor? (Not the chronology)

  I would like to dive and pre selectively switch off at the source-clip in the trash.

  Bonus round... are waveforms audio visual available somewhere in the source monitor Panel?

  Perhaps with a thread of keyframe-able?

  Thank you very much

  You can not key frames in the source monitor Panel (the Master Clip function applies not to the audio only).

  For the waveform to appear: fiddle the cursor or the playhead in the SM. (this is a bug).

• Install fees HCM 9.1, but the links don't work do not. Help please

  Dear all,
  
  I'm trying to make a move to the SAP to PeopleSoft. I thought it is easier to install TFTP since the number of installation source is much less than SAP. However, I kept getting same error where the links does not work no matter which environment I tried to install.
  
  I downloaded all of the software delivery.
  HCM 9.1, PTOOLS 8.52, Oracle 11 g 64 bit, Oracle Client 32-bit.
  
  First test:
  Install on windows 7 64 bit. Everything works fine until the first connection to the TFTP and all links doesn't do not.
  Hakan suggestion is to apply the patch and gave me a link to the old FTP site. I downloaded the patch 85209 but got the password.
  Finally I managed to get a customer to a friend ID and downloaded Patch 85211 and applied. But received error java so I put discarded it.
  Anyway, Gasparotto said the environment is not certified and will not solve my problem with the patch.
  
  Second test:
  Installed Virtual Box.
  Installed Windows 2008 R2 and apply the SP1.
  Installed all over again.
  Insured the similar PTWEBSERVER the username password.
  Everything works fine, but when connect to TFTP, once again... the links does not and see in the lower left corner there are a javascript error where they don't find some objects of peoplesoft...
  
  Just upgraded to IE 9 because I read somewhere that IE 8 is not certified.
  Tried to log in again, no error message and all seems well, but... the links don't work do not.
  
  Newspapers seems normal to me.
  
  Anyone who ever encountered similar problems before?
  Fact it is normal behavior before the tools patch 85211 applied?
  
  Thank you
  aLuNa
  
  My APPSRV journal:
  ----------------------
  PSSAMSRV.12 (0) [03/11/12 09:04:46] (0) PeopleTools release 8.52 (WinX86) from. Tuxedo server is APPSRV 99/100
  PSSAMSRV.12 (0) [03/11/12 09:04:46] (0) used Cache Directory: C:\APPSRV_CONFIG\appserv\HCDMO\CACHE\PSSAMSRV_100\
  PSSAMSRV.12 (0) [09: 04:46] (0) 03/11/12 server started
  PSRENSRV.2808 [03/11/12 09:04:49] (0) PeopleTools release 8.52 (WinX86) from. Tuxedo server is RENGRP 92/101
  PSRENSRV.2808 [03/11/12 09:04:49] (3) go to the new C:\APPSRV_CONFIG\appserv\HCDMO\LOGS\PSRENSRV_1103.LOG log file
  PSADMIN.2124 (0) [03/11/12 09:04:52] (0) attempt to end on the HCDMO field boot
  PSAPPSRV.1488 (3) [03/11/12 09:13:16 GetCertificate] (3) return of context. ID = PTWEBSERVER, Lang = FRE, UStreamId = 091316_1488.3, Token=PSFT_HR/2012-11-03-02.13.17.193528/PTWEBSERVER/ENG/XxZ3vyJWXF/S1MoQtG2Wox6wGJA=
  PSAPPSRV.1488 (5) [03/11/12 09:13:21 GetCertificate] (3) return of context. ID = PTWEBSERVER, Lang = FRE, UStreamId = 091321_1488.5, Token=PSFT_HR/2012-11-03-02.13.22.193632/PTWEBSERVER/ENG/pS6ec6pIAJJSYc1oOWcNYiR0UFQ=
  PSAPPSRV.1488 (7) [03/11/12 09:13:29 GetCertificate] (3) return of context. ID = PS, Lang is FRE, UStreamId = 091329_1488.7, Token=PSFT_HR/2012-11-03-02.13.30.193285/PS/ENG/3GnOezS6D9PUlzwrjPwqexv4ir0=
  PSAPPSRV.1488 (34) [03/11/12 09:18:47 GetCertificate] (3) return of context. ID = PS, Lang is FRE, UStreamId = 091847_1488.34, Token=PSFT_HR/2012-11-03-02.18.48.194158/PS/ENG//oJB5tvSHYNzsmZ2Gs4g2vBLUVs=

  alunwawa wrote:
  ...
  my configuration.properties file:
  psserver = HARTONO:9000
  joltPooling = true
  DomainConnectionPwd = {V1.1} 6O5vpwGxd5o =
  WebProfile = DEV

  AppDesigner 3tier mode does not care webprofile and Web server. It doesn't use any.

  an idea of the JOLT_CAT:1592 error?

  I think you misunderstandoog 3tier mode.
  3tier with AppDesigner connection is a direct connection to the application through the WSL port server, not on the Web or JSL port server or.
  So first WSL must be activate and port configured on the appserverver.
  Second, your client should point to WSL port (7000).

  You can learn more
  http://Gasparotto.blogspot.nl/2010/03/PeopleSoft-database-connectivity-part_28.html

  Nicolas.