Audio support two-way with PCoIP?

Similar Questions

• My Canon PIXMA MG6320 will support two computers with two different access points?

  I have a laptop connected to the router and modem satellite exceeds at home and a laptop connected to a router/modem with internet service from Verizon LTE wireless in the same House.  I would like to print on my printer Canon PIXMA MG6320 of two laptops.  Is this possible?  Whenever I try to connect my printer to a second access point, it rolls too one that was already there.

  Thanks for confirming my suspicions, merrymary247.

• Its two-way view 5

  I just want to know if it is possible... I've read about it, but I do not know... So I need your help to tell me if it works!

  I want to try with Thin Clients.

  Yes, this works very well if you have speakers and a USB microphone. (But not to confuse his two-way with VOIP applications)

  Linjo

• Problem of the printer, I get "the computer is unable to establish two-way communication with the device.

  Original title: printer problem

  "The computer is unable to establish two-way communication with the device. I have pluged a all cables and pluged in that they return.

  Hello
   
  1. What is the brand of your printer?
  2. when the question is is produced?
  3. you remember to make changes to your computer before the problem?
  4. when exactly you get this error?
   
  I would temporarily disable all security software and check if the problem persists.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  If you have an HP printer, you can consult the links below.
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c01868684&product=3737195
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c00301806&product=407677
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Its mixed? While playing the slide with audio, if the customer has hit a tab with audio interaction, two sounds will play together. How to avoid what is happening?

  While playing the slide with audio, if the customer has hit a tab with audio interaction, two sounds play together, which is not a good customer experience.

  How to avoid what is happening? Placing a marker can help, but cannot solve the problem when the compliant/no intentional user, press tab.

  
  

  Better, if the presenter can triggle tab automatically at some point, or click interaction, no game bar function.

  Hi Louie,

  My sincere apologies for not being able to help on your previous question.

  Now, that the Interactions are concerned, they were initially designed to be placed as standalone content on the slide.

  Also if you try to resize your interaction and place it on the slide as well as other content/objects released published will always give a priority to the Interaction that it deemed to be a specific slide of Interaction.

  In the previous project, you shared, you try to time the Interaction with PowerPoint animations and wanted it to appear later on the set of slides, rather than on the start. But, as explained above, presenter honored not this setting in your project, because he in fact has considered a slide of interaction and display interaction since the beginning of the slide room itself.

  Also the number listed in this thread is concerned, there is no direct way to do it but I would like to suggest something that might help.

  If you want to keep the interaction on your slide and other content, Interaction will be available at the beginning of the slide. Surely there is no way that delaying his appearance, but you can still use animation related to Interaction in another goal. Within your presentation-> playback option settings, you can enable the feature of 'Pause after each animation' (see screenshot below). It will essentially help you achieve the function of auto-faisant a break from your animations, using your narration would automatically stop, just before you claim in your narrative and inform the learner to click on the different tabs of the Interaction. All you have to do is your narration and animation correctly so that the slide play does not break too many times in the time interval. Hope you find the idea of what I'm trying to say.

  

  Please mark this answer as being correct, if you find it useful. We would certainly look at such scenarios to be achievable directly at the request of our updates and later version.

  Thank you

  Zeeshan Hussain

  Adobe Presenter Engineering Team

• Two-way-going with USRP n210

  Hi all

  I'm doing a two-way-going using the USRP n210. To be able to do that, I will need to know the exact time that samples have been sent and the time that I have received back.
  Trying to implement that I want to use 2 USRPs linked together.
  (USRP HAS)              (USRP B)
  TX<----------------->
  rx -----------------> tx

  For the porpuses first test, I used a single USRP linking the RX and TX together. With the help of a simple flow in the RRB graph I out a pulse (using the vector source) and at the same time, I have everything from the entrance of the USRP stored in a file (using the file sink block). For comparison, I also used a file sink block in the output.

  Testing again the difference between when I starts the code and the time the impulse arrives at the RX looks like that there is a kind of random delay. The difference between the send and receive in return the pulse fluctuates around 8000 ~ 10000 samples. Because I use a single USRP with RX and TX interconnected I though that this time limit should be almost zero.

  There's a better way to implement what I can get better accuracy in the timestamp?

  One solution that has helped me to solve my problem was using the following code in the code generated by the companion of GNU python:

  now = self.uhd_usrp_sink_0.get_time_now (#Store) the real time of the FPGA
  Self.uhd_usrp_source_0.set_start_time (UHD.time_spec_t (1) + now) #Set the source to start 1 second after the real time of the FPGA
  Self.uhd_usrp_sink_0.set_start_time (UHD.time_spec_t (1) + now) #Set the sink to start 1 second after the real time of the FPGA

  In this way both tx and rx, will begin at the same time.

• Dell v313 printer - my printer is not communicating with my computer - I need enable two-way communication in the printer properties

  My printer is not communicating with my computer. He always tells me to activate the two-way communication option in the printer properties dialog box.

  How can I do this?

  MichaelMcQuillar,

  Please check your virus protection and firewall. They seem to block communications from the printer.

  Rick

• Error "Unable to establish two-way communication with the device" Windows 8 with c309g

  Operating system: windows 8, 64 - bit

  computer: desktop

  Home network: network, the computer is on a wired connection, printer is on a wireless connection

  error message: "the computer is unable to establish two-way communication with the device.

  • When you install first of all my husband's new computer, we were able to install the software and connect the printer very well, and the printed test page.
  • A few days later, I installed the HP ePrint app on my iPad, found our printer and tried to print a page of a Web site. Printing failed, and the iPad app gave a message something like "the Word document may be printed." I cancelled again tried the iPad app, print work, and has not yet. I had not heard of AirPrint, so I did that on my iPad.
  • We tried to print the page of the computer instead, but the task has failed.
  • We looked at the parameters of the printer through the computer of windows 8 and found that there are two differently named c309g printer now displayed in the printer list.
  • My husband uninstalled the printer software, the computer restarted and reinstalled and then got the "the computer is unable to establish two-way communication with the device.

  any ideas on what to do next?

  My brilliant husband fixed it. Power cycling the router.

• New X 220 supported two external monitors with the mini dock plus?

  Hello

  I need to buy a new laptop of Lenovo in emergency.

  But we must ensure that it supports dual display on two external monitors. (VGA)

  My question is:

  (1) we plan to buy with the mini dock more, she has two HDMI port.

  can it support two external monitors for Intel HD Graphics 3000?

  (we will close the covers when to use two external monitors)

  (2) can I use DVI to convert converter VGA to VGA to support two external monitors

  (3) what is the difference in weight to 220 X SATA HDD and SSD HDD?

  Please help to emergency!

  Rgds,
  Sun

  Hello

  Yes, it works.

  He must need a converter VGA (F) display port.

  Thank you.

  See you soon
  Sun

• Unable to use the email from Sony with a two-way authentication application

  Hello

  Currently I use Microsoft Outlook as my default e-mail client, but I'm not satisfied. So I want to switch to clean Sony e-mail but when I want to connect with my account that has two way authentication, he says that there is an error while signing and re - check my password. Even if the password is correct.

  Thank you

  Thanks for your reply, but it did not work. Looks like you need a password app break account.live.com that generated password instead of your e-mail password.

• Two-way sync with Google Apps Gmail/Verizon blackBerry smartphones does not

  To navigate on this forum, I see the two-way synchronization of read/delete messages with Gmail should work since early May. However, I was never able to get the two-way synchronization works successfully on my BlackBerry. (I have a Storm 9530 with Verizon, and I use BIS with Google Apps Gmail on my own domain name.)

  Several times over the last couple months, I've tried different combinations of: deleting my account Gmail from BIS and Add again a few hours later. Reset my device; return service directories; ensuring that all my BIS and parameters in the reconciliation of the enamel on my device are in order. But I read in Gmail messages continue to remain not read on my BB has marked more than a day later.

  Notably, sent messages to Gmail appear on my BlackBerry and have since early May. Contacts sync also works as expected. However, no other aspect of the two-way sync seems to work. Is there anything I can try to make it work?

  Postini disabling and modify records MX for ASPMX. L.GOOGLE.COM. et al., then remove and re - integrate my bis account has indeed fixed my problem. Apparently parts of the BIS use MX one records field to determine whether to use Gmail or IMAP ordinary. That's why reconciliation features for Gmail (and some of the features of the plugin improved too, Gmail it looks to) are not available if your Google Apps domain uses the Postini Services.

  Fortunately, I don't require Postini on my domain (because it is just my private domain, I really useless company features;) I allowed him only because that's where ), so that this action has resolved the problem for me. Although this bug could end up biting small businesses that use Google Apps with Postini and want to use BIS; If all goes well it will be fixed in a future BIS release.

• Two monitors with a view 4.0 using PCoIP on ESX 3.5 hosts (4 VM version)

  You can use multiple monitors View 4 with PCoIP, when it is running on the virtual machines that are on ESX 3.5 (vCenter 4 If) with virtual machines that are running on the virtual machine hardware 4?  We have an environment where we cannot get two monitors to work (installation is correct in the options view pool, VMX file and video memory), although it works 'out of the box' elsewhere.  the main difference is the ESX (and hardware VM) versions.   Any thoughts?

  Thank you

  Brandon

  Maybe this post will help, http://www.thatsmyview.net/2009/12/18/how-to-get-pcoip-with-view-4-to-work-every-time/.   Are there problems with PCOIP display outside both monitors?

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Taken serial port redirection supported with PCoIP?

  Does anyone know if the serial port redirection is supported when connecting through the PCoIP Protocol?

  This works if you are using the RDP Protocol, but not of PCoIP.

  Connection of Windows Embedded Standard View 4 customer via View 4 build 233023 XP SP3 server computer virtual resource.

  No, only USB ports can now be redirected with PCoIP

  Best regards

  Linjo

  If you find this information useful, please give points to "correct" or "useful".

• Two-way synchronization of Lightroom with Flickr?

  I have been using Lightroom with Flickr for a long time. A certain degree of two-way synchronization between the plugin Flickr (the one that comes with Adobe Lightroom) and Lightroom is possible. For example, coomments are uploaded to Flickr. However, there are some strong limitations on this plugin:

  (1) has problems if you have a lot of Flickr photo sets then you can't keep all registered in Lightroom, but you can update after post you them on Flickr. For example if you find an error in a name or retouch a photo. This is particularly the case if you move to a new computer or do a major upgrade and lose games photo appearing on the card.

  (2) If you import pictures from another library where you've set up a Flickr album then this album not imported to Lightroom in the Flickr publish the module. The connection to Flckr is lost!

  I am in no way suggest using Flickr as a backup, but it would be useful to be able to link to the existing albums in Lightroom and locate the existing files in the current library or to the list of missing persons so that the republication are then possible. If someone knows a way to get this answer please then.

  Currently I use Lightroom 4.3 on a Windows 7 PC.

  Thank you
  Marcel

  maholyoak wrote:

  It would be useful to be able to link to the existing albums in Lightroom and to locate the existing files in the current library

  It's this piece from your original post that caught my attention.

  According to http://regex.info/blog/lightroom-goodies/flickr/publish#populate , that he should try to link previous Flickr updated with photos in your catalog.  I don't use Flickr for a long time, so I'm not up-to-date with the current functionality.

• HP Deskjet 1050 (J410 series): unable to establish two way connection printer

  Hello

  My printer is connected to my laptop via a USB port and provides ink level readings. It will not print any documents or test pages and when I try to align/clean ink cartridges a message "Unable to establish two track with device connection".

  Can someone advise me on how to solve this problem as soon as possible? Thank you!

  Hello @West__44,

  I would like to help you today to correct the problems of two-way communication that you encounter when using the USB connected HP Deskjet 1050 all-in-One printer on your computer Windows 8.1. Because you get this error via a USB cable connection there are likely a driver or software conflicts between your HP Deskjet and your Windows computer. Can I please you follow the steps below to resolve this issue.

  • Please, unplug your USB cable from your printer and your computer before you continue.

  Step 1: Remove the driver:

  For the purposes of troubleshooting, it is essential that we have a clean slate to work with. Therefore, I will be having remove you all traces of your HP Deskjet from your computer in Windows before you run the hotfix.

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key.
  2. On the start screen, type programs and features. Click on programs and features to start.
  3. Under the window programs and features will populate a list of the programs installed on your computer. Please scroll through the list and select your Printer HP Deskjet. Click Uninstall.
  4. Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, proceed to the next step.

  Step 2: Remove temporary files:

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key.
  2. On the start screen, type run. Click on Run to launch the run dialogue box.
  3. In the run box type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 3: Install the device:

  1. Please click here to download the package full feature software and driver for your HP Deskjet printer.
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. Do not connect the USB cable until the installation program invites you to
  4. On your laptop, please make sure that the USB cable is plugged directly from the back of your printer to the laptop. Avoid USB Extenders and home stations as they can cause conflicts of USB communication.

  Once the installation is completed successfully, please test print to confirm that the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Thanks for joining the Forums from HP Support. I can't wait to hear strings attached good luck!