Two-way synchronization of Lightroom with Flickr?

Similar Questions

• Synchronization of Lightroom with Bridge changes

  I'm having a problem with synchronization between Lightroom 2.4 and the bridge (using Photoshop CS4, Camera Raw version 5.3.0.21).
  I lighroom preferences defined as follows: unsaved metadata are checked for the icons of the cell in the grid view and automatically writing turns into metadata is selected in the catalog settings. In addition the Camera Raw settings are set to save image settings in sidecar xmp files.
  Here's the problem:
  If I make a change in Lightroom, the changes are automatically reflected in Bridge. However, if I may make a change to the bridge (Camera Raw) changes are not recognized in Lightroom. In fact, the up arrow on the Lighroom cell which indicates that the metadata was changed externally does not appear automatically. Is there a required refresh? How can I tell that a file has been modified outside? If I make a change in the file in question and then undo the Update icon change appears! but it is a strange way to know that the file has been changed. Any suggestions? much would appreciate your comments.
  Thank you.

  If I make a change in Lightroom, the changes are automatically reflected in Bridge. However, if I may make a change to the bridge (Camera Raw) changes are not recognized in Lightroom. In fact, the up arrow on the Lighroom cell which indicates that the metadata was changed externally does not appear automatically. Is there a required refresh? How can I tell that a file has been modified outside? If I make a change in the file in question and then undo the Update icon change appears! but it is a strange way to know that the file has been changed.

  Lightroom is not continuously monitor what is happening outside the catalog and the method it uses to check periodically for external changes is a bit slow. The best way to ensure that catalogue Lr faithfully all externally applied changes to the metadata that has been applied to an image is to use the command to synchronize the folder. This command analyzes the file looking for external changes and new images. You then have the option to read the changes and returns to the Lightroom Catalog.

  

  BTW: upgrade of Camera Raw 5.4

• Two-way synchronization of Gmail from BIS Smartphones Verizon blackBerry?

  Is it possible to use IMAP instead of POP with gmail only for this, as the two-way sync with Yahoo mail? You would think that would work this basic function...

  Rarely, it takes six hours, but it may take some time (from the server to your handheld).

  And I don't know why... I don't like watching sausage being made, I just enjoy eating.

  Was all that was not working? You get the reconciliation in the other direction ok?

• Two-way synchronization of blackBerry Smartphones Gmail?

  I've seen reports in a rss news feed about two way to end gmail sync and it is in the Gmail and Google Blog. I guess if I'm missing something. Are they talking about enhanced Gmail plugin that came out? Or they talk about a Gmail program update which is downloadable? Or even an upgrade to the Gmail plugin improved?

  This is one of the links that I receive my information

  http://www.softsailor.com/news/25910-2-way-syncing-for-BlackBerry-is-now-available.html

  It is not necessary.

• I lost my install cd is a way to download lightroom with the serial number or my user name?

  I lost my cd in our move and I can't find it anywhere, I bought a laptop and I wanted to download it to the mobile edition. is it possible to download it with the CD?

  Once you have your serial number, you can reinstall the latest update for the version that you have.

  See the link below for info.

  Update of Lightroom

• Two-way sync with Google Apps Gmail/Verizon blackBerry smartphones does not

  To navigate on this forum, I see the two-way synchronization of read/delete messages with Gmail should work since early May. However, I was never able to get the two-way synchronization works successfully on my BlackBerry. (I have a Storm 9530 with Verizon, and I use BIS with Google Apps Gmail on my own domain name.)

  Several times over the last couple months, I've tried different combinations of: deleting my account Gmail from BIS and Add again a few hours later. Reset my device; return service directories; ensuring that all my BIS and parameters in the reconciliation of the enamel on my device are in order. But I read in Gmail messages continue to remain not read on my BB has marked more than a day later.

  Notably, sent messages to Gmail appear on my BlackBerry and have since early May. Contacts sync also works as expected. However, no other aspect of the two-way sync seems to work. Is there anything I can try to make it work?

  Postini disabling and modify records MX for ASPMX. L.GOOGLE.COM. et al., then remove and re - integrate my bis account has indeed fixed my problem. Apparently parts of the BIS use MX one records field to determine whether to use Gmail or IMAP ordinary. That's why reconciliation features for Gmail (and some of the features of the plugin improved too, Gmail it looks to) are not available if your Google Apps domain uses the Postini Services.

  Fortunately, I don't require Postini on my domain (because it is just my private domain, I really useless company features;) I allowed him only because that's where ), so that this action has resolved the problem for me. Although this bug could end up biting small businesses that use Google Apps with Postini and want to use BIS; If all goes well it will be fixed in a future BIS release.

• Calendar two-way sync blackBerry smartphones not

  BlackBerry Desktop Manager 4.7 informed me there was (4.5) updates to my Blackberry Curve 8330. I downloaded & installed the updates on my device; However, his calendar is therefore more two-way, synchronization with Outlook 2007. Initially, sync told me that he had a number of Outlook calendar events to add... This actually created duplicate on the device. I checked synchronization has been set for two lanes, removed duplicates and re-sync... She wants to add the events again. I let him, but he had no overlap. The new calendar in Outlook items are added to my Blackberry when a synchronization is performed; However, it keeps wanting to add the same calendar events 80 + every time (although he does not overlap them). New events added to the Blackberry calendar do not appear in Outlook after syncing. If an event is deleted on the Blackberry, it reappears after synchronization.

  I backed up my camera and erased his calendar items in the backup restore & > Advanced Options... no luck. I uninstalled Desktop Manager, version 4.5 (from the CD that came with my camera)... no luck. I have re-installed Desktop Manager 4.7... no luck. I have not eliminated items in calendar again... no luck.

  I use the Blackberry & Outlook 2007 only - no BES. I only have a calendar on the device and a calendar in Outlook. Address book information synchronizes perfectly every time; I does not synchronize e-mail or tasks.

  Anyone have any suggestions for the restoration of the two-way Calendar synchronization between Outlook & Blackberry?

  Contact Bell Mobility support, who advised to wipe the Blackberry. This solves the problem.

• Two-way-going with USRP n210

  Hi all

  I'm doing a two-way-going using the USRP n210. To be able to do that, I will need to know the exact time that samples have been sent and the time that I have received back.
  Trying to implement that I want to use 2 USRPs linked together.
  (USRP HAS)              (USRP B)
  TX<----------------->
  rx -----------------> tx

  For the porpuses first test, I used a single USRP linking the RX and TX together. With the help of a simple flow in the RRB graph I out a pulse (using the vector source) and at the same time, I have everything from the entrance of the USRP stored in a file (using the file sink block). For comparison, I also used a file sink block in the output.

  Testing again the difference between when I starts the code and the time the impulse arrives at the RX looks like that there is a kind of random delay. The difference between the send and receive in return the pulse fluctuates around 8000 ~ 10000 samples. Because I use a single USRP with RX and TX interconnected I though that this time limit should be almost zero.

  There's a better way to implement what I can get better accuracy in the timestamp?

  One solution that has helped me to solve my problem was using the following code in the code generated by the companion of GNU python:

  now = self.uhd_usrp_sink_0.get_time_now (#Store) the real time of the FPGA
  Self.uhd_usrp_source_0.set_start_time (UHD.time_spec_t (1) + now) #Set the source to start 1 second after the real time of the FPGA
  Self.uhd_usrp_sink_0.set_start_time (UHD.time_spec_t (1) + now) #Set the sink to start 1 second after the real time of the FPGA

  In this way both tx and rx, will begin at the same time.

• Dell v313 printer - my printer is not communicating with my computer - I need enable two-way communication in the printer properties

  My printer is not communicating with my computer. He always tells me to activate the two-way communication option in the printer properties dialog box.

  How can I do this?

  MichaelMcQuillar,

  Please check your virus protection and firewall. They seem to block communications from the printer.

  Rick

• Error "Unable to establish two-way communication with the device" Windows 8 with c309g

  Operating system: windows 8, 64 - bit

  computer: desktop

  Home network: network, the computer is on a wired connection, printer is on a wireless connection

  error message: "the computer is unable to establish two-way communication with the device.

  • When you install first of all my husband's new computer, we were able to install the software and connect the printer very well, and the printed test page.
  • A few days later, I installed the HP ePrint app on my iPad, found our printer and tried to print a page of a Web site. Printing failed, and the iPad app gave a message something like "the Word document may be printed." I cancelled again tried the iPad app, print work, and has not yet. I had not heard of AirPrint, so I did that on my iPad.
  • We tried to print the page of the computer instead, but the task has failed.
  • We looked at the parameters of the printer through the computer of windows 8 and found that there are two differently named c309g printer now displayed in the printer list.
  • My husband uninstalled the printer software, the computer restarted and reinstalled and then got the "the computer is unable to establish two-way communication with the device.

  any ideas on what to do next?

  My brilliant husband fixed it. Power cycling the router.

• Problem of the printer, I get "the computer is unable to establish two-way communication with the device.

  Original title: printer problem

  "The computer is unable to establish two-way communication with the device. I have pluged a all cables and pluged in that they return.

  Hello
   
  1. What is the brand of your printer?
  2. when the question is is produced?
  3. you remember to make changes to your computer before the problem?
  4. when exactly you get this error?
   
  I would temporarily disable all security software and check if the problem persists.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  If you have an HP printer, you can consult the links below.
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c01868684&product=3737195
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c00301806&product=407677
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Unable to use the email from Sony with a two-way authentication application

  Hello

  Currently I use Microsoft Outlook as my default e-mail client, but I'm not satisfied. So I want to switch to clean Sony e-mail but when I want to connect with my account that has two way authentication, he says that there is an error while signing and re - check my password. Even if the password is correct.

  Thank you

  Thanks for your reply, but it did not work. Looks like you need a password app break account.live.com that generated password instead of your e-mail password.

• Synchronization in active two-way replication tables

  Hello

  I have a table on two sites A and B with the same name and structure but with different records. How can I synchronize two tables before you activate the active replication.

  Thanks and greetings

  Mohamed Ahmed

  Hi Rudy,.

  Yes, you can... Manually, you need to insert the missing records at both sites (wherever necessary). Because to enable replication goldengate, records must be the same on both sides (two sites).

  I think that, if you go ahead with replication without organizing, then you will end up by with duplicate records. Sometimes the process may ABEND. It comes to creates data integrity problems.

  If the table has the primary key?

  Kind regards

  Veera

• How to increase or decrease the effect of an adjustment brush in Lightroom CC? In Lightroom 5, I could hover over the PIN and drag the two-way arrow left or right. This feature seems to have disappeared in the CC version.

  How to increase or decrease the effect of an adjustment brush in Lightroom CC? In Lightroom 5, I could hover over the PIN and drag the two-way arrow left or right. This feature seems to have disappeared in the CC version.

  I'll answer one of your three messages that asked this question.  If possible, please remove the other two.

  Hover and dragging moves the axis as it should.  The cursor turns into a hand to indicate the area brushed, it moves.

  Hover over the pin code, press the Alt/Opt key and drag left and right and the effect will become less and more.   The cursor turns into a two-headed arrow to indicate that the function of the drag has changed.  If you are not hovering over a pin code and press the Alt/Opt, then the cursor turns into a brush to erase to remove the adjustment every time you paint.

• If I buy Adobe CC photography, how mobile devices can I synchronize Lightroom with?

  If I buy Adobe CC photography, how mobile devices can I synchronize Lightroom with?

  Hi Mark,

  There is no limit - it is dependent ID

  Have fun

  Joerg