authentication fails after adding Gmail like Exchange account with 2 steps of authentication

Similar Questions

• Adding and removing user accounts with PowerCLI

  Hi all

  I was wondering if there was anyway to add and remove users from a Windows Server 2003 using PowerCLI system.  Ideally, I expected to find a way to eventually automate a way to add and cancel the accounts with a script.

  Thanks for any advice that anyone can give or you can push me in the right direction.

  Best

  No, I was aking because you can't do a "psexec \\computername.

  The name must be resolved through DNS or WINS, so there should not be any need to move to IP addresses.

  The fact that you cannot communicate apparently from a VMS on host A to a VMS on host B, could be caused by these two servers have the topology of the network. You have the same portgroup (with the same VLAN) defined on the two hosts?

  Two virtual machines are connected to this portgroup?

• Cannot access Yahoo, Gmail and other accounts with password in Firefox, but can in Chrome. I type the passwords in myself - not registered.

  Started happening today (22/07/2015) - after the re-opening Firefox this afternoon, I couldn't connect to Yahoo, G-mail accounts, as well as other protected by password. Fortunately, I could access these accounts in Chrome. I don't have browsers save the passwords. I always type them in manually. How can I access these accounts in Chrome and not Firefox? JavaScript or what? The whole Flash issue is also boring. I use more other browsers. Please fix, or I forget quite using Firefox.

  Safe mode is a troubleshooting mode that turns off temporarily
  hardware acceleration, restores some settings and disables
  -Add-ons (extensions and themes). If the problem disappears,
  that tells us something. If it is not the case, this tells us something else.

  • Step 1

  Type of topic: preferences #advanced< enter > in the address bar.

  Under Advanced, select General.
  Find and stop using hardware acceleration.

  Restart Firefox. Is always the problem?

  • Step 2

  It could be the work of one of your modules.
  Type of topic: addons< enter > in the address bar to open your add-ons Manager.
  Access key; < Control >(Mac: < command >)< shift > has)

  In the Manager of Add-ons, on the left, select Extensions.
  Disable some add-ons, then restart Firefox.

  Some added addons toolbar and anti-virus are known to cause
  Firefox issues. Disable all of them.

  If the problem persists, disable some more (restarting FF). Continue until the
  the problem disappeared. After, you know which group is the origin of the problem.
  Reactivate the last group ONE AT A TIME (reboot FF) until the problem reports.

  Once you think you have found the issue, that disable and reactivate all the
  others, then restart. Let us know who the suspect is detective.

• Problem of mailbox in Zimbra using as Exchange account

  Hello

  I have problems with my Zimbra mailbox, when I add it as an Exchange account. Calendar can be synchronized, all items of mailboxes are visible, and I can also see the mail, with the exception of its content. Subject, the sender may be visible, but the content of the e-mail is not displayed.

  Adding gmail like exchange account can view the contents of the mail. So of the probem involves only my Zimbra account. Zimbra works on Sony Xperia P and Xperia U to gingerbread, but not with my S Acro with ICS.

  I hope that I will receive a correction.

  UPDATE:

  A colleague with Xperia P used Zimbra to the gingerbread with no problems. He has just updated the device with ICS and he knows the same problem as me. The content of the emails are not displayed.

  So the problem is definitely in the e-mail Exchange of ICS client. Please fix this bug problem as soon as possible.

  UPDATE 2:

  Zimbra works with Exchange / Active Sync on the Samsung Galaxy S II ICS 4.0.4 ROM, the problem occurs only on Sony devices.

  This article solved my problem: http://talk.sonymobile.com/thread/35322?start=20&tstart=0 , post 28.

  I had to turn off the political motive on the Board of Directors of Zimbra.

• Connection option removed PIN when adding the exchange account

  Initially, I set up my account and added a PIN. Next, I added my work exchange account (which has a policy active sync which disables any connection other than the code pin and password). I accepted additional restrictions, but the option to connect via a pin code has been removed.

  So two questions:

  * Is the login to pin on a surface treated differently the PIN on a phone connection

  * Remove my OWA account has no restrictions from field. How can I remove them completely?

  Thank you

  Ross

  Hello DarganR,

  Thank you for the question!

  I'm sorry to know that have problems you with the Exchange account. As I understand it, you need to remove the domain restrictions.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en/w8itpronetworking/threads

  Meet us if you face any problem of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Cannot configure the Exchange account on the iPhone 6

  I have an iPhone installed 6 9.3.2. I tried to add my work Exchange account to the native application and the Outlook application and will not work. He says no more it cannot check account details or it asks me to check the user name and password. My exchange account will not also add to my old iPhone 4S or iPad 3.

  Other users of the iPhone to work added to their Exchange accounts without problem. Mine is the only one Exchange is aware of this does not work. They were not able to help. There is no IMAP settings, so I can only add an Exchange account.

  I tried to reset the network settings, but that didn't help. I even tried the soft CloudMail and does not work either.

  Any ideas?

  I saw a few times at my work. Cause is more than likely the local rather than on iPhone, mail server because it does not work in the Mail as Outlook App application.

  It could be that the settings on the e-mail server does not have Activesync devices – might be useful to check with HER to see if they enabled that.

• Cannot send mail to an Exchange account after v38.0.1

  I set up an Exchange account in Thunderbird and used for years (since the v31.7.0 v3).

  I just upgraded to v38.0.1 and although I can receive/download new emails, I can't send new emails: Thunderbird keeps asking me the password (which is registered and protected with password manager) although I correctly every time, Thunderbird seems unable to authenticate to the SMTP server.

  I use port 465 on the SMTP Exchange Server, with NTLM as an authentication and STARTTLS method for the security of the connection. These are the settings that SMTP server used for years without recent change at all.

  I just down to v31.7.0 and reinstalled my lightning v3.3.3 so module: without modification I can send emails once again, is clearly a problem of authentication in v38.0.1.

  See https://bugzilla.mozilla.org/show_bug.cgi?id=1174159

• Firefox blocks the pop-up Windows Gmail even after adding exception of Gmail

  Firefox Gmail blocks every time I try to open a new window/tab through my Inbox, asking me permission each time. It's a question of low but persistent. I entered the content settings and added Gmail as an exception to the rule of the pop-up and also checked the Info Page to make sure that pop-ups were allowed from Gmail. No solution seems to work. Are there patches? Beyond to allow all pop-ups?

  Oh, which explains it. Redirect block is a completely different framework.

  "3-bar" menu button (or tools) > Options > advanced

  Under the mini general tab in the accessibility section, uncheck the box for "warn me when websites try to redirect or reload the page.

  What is fix?

• Cannot add Exchange account to Outlook on iPhone 6

  I use Outlook on an iPhone 6. No problem adding outlook.com and Google accounts. Failed to add the Exchange account - after minutes of trying to connect to the server, the error message indicates that the connection to the server failed. Strangely enough, it is just another application I use, email + Outlook, works perfectly (mail, calendar and contacts) with the same only inserted settings in Outlook. I had the same problem with my iPhone 5

  It could be something with the way the Outlook application communicates with your Exchange Server. I would check with the Exchange administrator to see if the application is in fact communicate with the server. They can view this information at their end Exchange servers can be very specific with what kind of external devices communicate with the server. If that does not reveal a problem, check with Microsoft, which created the Outlook application, to see if they can provide an overview of this.

• Unable to access Mail on Mac after the Gmail password change.

  I changed my Gmail password after "suspicious activity", but now I can't Mail to work on my Mac. The first error says that the password is incorrect so I signed up via a web browser successfully, so I knew the password worked. Then, I deleted and added re my account but I get an error "the imap login failed." I tried to configure the POP account with the same results ("pop connection failed"). Conversely, I CAN access my account through the web and on my iPhone.

  I can't understand what is the trick for adding Mail on my Mac. Any suggestions?

  He might try to use the old password in the keychain. Unless you go to keychain and delete, it is still there. What operating system do you use? 10.6.8 is? Also if it does not store the new password in the keychain that would.

• "Security error" when setting 'Microsoft Exchange Hosted Services' Exchange account (user in company)

  I am a user in a company with a very large company that actually uses Microsoft Hosted Exchange services hosted by Microsoft employees in their facilities.  I called Palm support and they were clueless and zero help.  The lady pointed me to some Palm article I had already read and only remotely had nothing to do with my problem.  I don't see anything about this error message in the forums and google searches. Sprint has even replaced my other reasons palm pre, and the same error occurs once I configured the exchange account. I also see the error when I set up my account on my pixi nine wives. Our pre and pixi have already exchange accounts set up with success on our phones that are hosted by sherweb. Sherweb's exchange accounts work fine. I tried to set up this account of microsoft hosted exchange 5 - 6 times with the same result. He accepts my configuration information and adds to the list of email accounts available in the meadow. However, it keeps popping up the message stating "error of security policy:"Exchange..." Tap for details"(with a yellow exclamation point). Then he said "Security policy error" the Exchange (first part of my email address) account is disabled because it is impossible to define security policies. "'Leave this option disabled' or 'delete account '. I know that something does not work because it applied a policy of password or PIN on my phone which is not necessary, unless the account has been added. I can also see it in the "Mobile devices" section of outlook web when I login. This is the place in web outlook where you can see the last time the device synchronized, if remote, you can wipe the phone etc. If anyone has an idea how to solve my problem please post. Any ideas? I'm fresh out of ideas on this issue and very frustrated by the Palm developers. Just another example of evil-development and practical tests by Palm. I hope they correct this problem on later versions, but I'm only slightly optimistic that they will never get this medium of exchange e-mail at the level necessary for the support of large corporations. What I know is that my Microsoft Hosted Exchange account works fine on a Windows Mobile phone and an iPhone 3GS (confirmed by the other coworks who have set up their phones using our Exchange services). Accordingly, I have no choice but Palm to blame for this problem instead of Microsoft. Please, Palm fully support microsoft exchange e-mail users!

  After a lot of research on the subject, here is my point of view on the State of support for MS Exchange @ Palm and other companies.

  Unfortunately, Palm Pre and Pixi, WebOS is not fully supported Microsoft Exchange.  This has led to numerous reports of frustrated customers and countless hours of time wasted by consumers and technical support trying to figure out how to connect these Palm devices to the MS Exchange e-mail servers.  Way to go Palm!  Provide support for all the free email accounts worldwide and decide not to develop a product that is able to support your most rich and more influential-based email clients.  These are the people who are most likely able to spend more money on your mobile products or make decisions for companies that are able to buy huge amounts of smart phones.  Way to go guys!  Penny wise and dollar foolish if you ask me!  Palm supports only partially a handful of MS Exchange security policies.  They document what they take in charge, but they do a very poor job of documenting or even explain the limitations of the software.  Their States of documentation that the security policies that are not supported will not be applied and that users will still be able to connect to the exchange server.  This is certainly not true based on the reported error and other similar user reports.  Here is how iPhone and Palm compare in regards to the support of MS exchange security policy.  Notice in the quotes below the iPhone supports the policy of 'require the encryption of devices' which is very probably used by your greater and more security conscious companies or Government institutions.  I'm sure that Palm's inability to support "device encryption" is why I get this error, even if I have really no way to prove it at the present time.  Come on Palm, if you go to support full POP3 and IMAP, you must provide the full support of the binding protocol and political security by Microsoft Exchange product.  Here is the comparison between iPhone and Palm WebOS:

  ' Said the site of Apple, the iPhone supports the camera allow, password enabled, allow a Simple password, alphanumeric password, Password Expiration, history of password, Maximum password attempts failed, minimum password length, maximum idle lock, policy, Minimum refresh interval complex character devices. ", require manual synchronization while roaming and - in iPhone OS 3.1 only - require Device Encryption". (13 security policies)

  "Palm Web site says its WebOS 1.1 and later support active password, alphanumeric password, password history, Maximum password attempts failed, maximum length password, lock of inactivity maximum, Minimum peripheral characters complex and Password Recovery." (8 security policies)

   

  Windows Mobile 6.1 supports all THE policies.

  BlackBerry does not support the EAS (MS Exchange)

  Google's Android is not compatible EAS (they may have recently released some support but not full)

  Conclusion: If you want a mobile device that fully supports MS Exchange, buy something that is running Windows Mobile 6.1 (or higher) or even an iPhone 3 g (or more).  At least, until Palm decides they want to throw a development more $$ to support Microsoft Exchange E-mail to enhance their level of support.

  Reference: "how to avoid the lie of the foreign exchange policy by smartphone' http://www.infoworld.com/d/mobilize/how-avoid-smartphone-exchange-policy-lie-004?page=0, 1

  Message edited by morgan1112 on 12/01/2010 15:00

• [BUG] Unlock failed after the attempts of wrong PIN. However, Message for "SONY" is very often

  Yesterday, I got the Z5 in my pocket and it is turned on (double tap to wake up) and he got the wrong PIN code. A message popped up telling me that the unlock code has failed and I have to enter the word "SONY" to continue. After that, I can enter the right PIN or a fingerprint can unlock the Z5.

  

  Now, whenever I restart the device I get the same message, and sometimes when I want to open the Z5. Is there a solution to this problem?

  Hello

  This seems odd. You should only get this popup if they enter their PIN wrong too many times. This is a feature we've added to prevent accidental data deletion when you have an Exchange account that applies it.

  Could you try to delete the account you have that apply under settings-> accounts, restart the phone and then add the account back again and let me know if that helps?

• BlackBerry 10 cannot delete the email account (unauthenticated) / cannot authenticate the email account with different servers SMTP and IMAP (a gmail)

  After updating the OS on my last night in 10.1.0.4181 Z10 (software) / 4633 (OS), all my accounts set up asked for credentials must be verified. Looks like now that it uses some sort of mechanism of OAuth - worked well for my Gmail accounts with two-factor auth.

  One of my accounts that I have Gmail as IMAP server (using a regular gmail.com account), but another SMTP server, with the address on a different domain. I use Gmail as my email client, basically.

  After the upgrade, I am prompted to authenticate, but at some point, someone on my domain set up Google Apps. Has never been for nothing. I wonder to enter * that * password via Google. I don't, and this is NOT the account that I'm trying to connect. (I want a server with user name [email protected] gmail.com IMAP and SMTP [email protected]).

  So I'm stuck... can not authenticate.

  Even worse: Also, I can not delete the account! Delete option is not available until after you have again authenticated. Because I can not delete the account, I can't try to add it again separately - I get an error indicating that the account is already configured.

  All options except wait for the next update of OS or do a wipe/restore?

  (Wipe/restore is really not an option for me, it takes several hours, and the last time I was forced to restore, I lost a good amount of data that I then had to enter manually in restoring to my old 9790 and then it tapping on my Z10.) Not to take this risk again).

  Try this:

  Open an e-mail account with the same account information and email address, but as a pop account to synchronize the account. Both accounts now appear in a new sub-account. Now you can remove the two accounts together. It worked for me...

• BlackBerry Q10 ActiveSync does not synchronize my Contacts after changing to another Exchange Server

  I changed to another supplier of services of Exchange and now the problems with my Contacts on the Blackberry Q10. After the configuration of the new Exchange ActiveSync account, I observe the folliwng:

  1. New contacts created in Outlook / Exchange Server will not synchronize to the Q10.
  2. New contacts created on the Blackberry are synchronized backed the Exchange Server / Outlook Client.
  3. BlackBerry-Contacts are visible, but won't open (like "zombies").
  4. BlackBerry Contacts from other sources (Facebook, WhatsApp) are no longer bound together, in other words, it seems that the person has multiple contacts entries.
  5. Sending / receiving mails and work on the Blackberry calendar entries.

  I fixed it myself. Now, the Contacts are all back in, deduplicated and healthy. That's what I did, step by step, in settings > accounts:
  1 turn off Sync contact on the Exchange ActiveSync account
  2 delete the Facebook account
  3 remove account Skype and gmail
  4. run "Delete local Contacts"
  5. in Contacts, check the number of Contacts: contact no.
  Then in settings > accounts:
  6. turn on synchronization of Contact for an Exchange account
  7. This brought all Exchange contacts
  8. Add Facebook, Skype and a gmail accounts.

  END

• Smartphone blackBerry, adding Gmail to Storm - problem

  PROBLEMS connecting GMAIL in the storm.

  By choosing Gmail, email facility

  I can't configure Gmail on the storm. It is a choice, then it shgould work. Technical support was not able to help.

  When I selected gmail it then asks for my username and password, then when I click nextI get the message after a long period of trying to connect to messaging settings, "your device had a problem connecting to the server, try again" I clicked retry it finally answers the same thing again. Last night and today I got was "We don't have set up [[email protected]]."  Help, please.

  Search Google help I found a script for adding Gmail to a Blackberry, but it does not mention the storm. When I try to leave out the password as it recommends for the establishment myself, all I get is a message that says password is required, and it doesn't let me do anything else.

  Here's the script of Google for Blackberry.

  To configure IMAP for your BlackBerry access, simply follow these steps:

  1. Enable IMAP in your Gmail settings.
  2. From your BlackBerry home screen, select the BlackBerry Configuration icon, and then choose Personal Email Set up. (On older devices, look for the Personal Email Setup icon.)
  3. Select personal email configuration.
  4. Agree to the terms and Conditions.
  5. On the page "Account Setup Email", enter your full email address (including the ' @gmail.com ' or ' @your_domain.com '), but leave the ' password: "field blank. Select Next.
  6. You will see a screen that says: "We don't have set up [[email protected]]." Select I'll give you the settings to add this email account, then Next.
  7. Select Internet Service Provider Email (POP/IMAP), then Next.
  8. Select I'll give you the settings to add this email account, then Next.
  9. You will see "The BlackBerry Internet Service could not configure [[email protected]] email address." Select the provide settings to continue.
  10. In the "user name:", enter your full email address (including the ' @gmail.com '). Google Apps users, enter your full email address at your domain. Then enter your password in the ' password: "field.
  11. In the ' mail server: "field, enter 'imap.gmail.com', then select Next. Google Apps users must enter the name of the server provided; do not add your domain name in this step.
  12. If IMAP access has been configured successfully, click OK.
  13. Below your newly added Gmail address, select Edit.
  14. Select Advanced settings at the bottom.
  15. Make sure that the port is set to ' 993' and 'Use SSL' is set to 'yes '.
  16. Select Save.

  It should now be a new icon in the box to the letters on your BlackBerry home screen labeled with your Gmail address. Once you see this icon, follow these steps to ensure proper setup:

  1. Open box icon.
  2. Open the menu by pressing the wheel or the BlackBerry menu button and select Options.
  3. Select email reconciliation.
  4. Check the following settings:
     • Delete on: mailbox & Pocket
     • Wireless reconcile: on
     • On conflicts: mailbox WINS
  5. Select Save.
  6. Check our customer recommended settingsand adjust the settings of your client as needed.

  I have gmail and it comes through my storm, no problem.

  Go here: http://na.blackberry.com/eng/support/blackberry101/setup.jsp#tab_tab_email (they appear towards the bottom of the page) to find your carrier's Web site, then go to the website and create an account.

  Once you're connected, you can create/edit/delete emails from here.  You can also create e-mail filters (for example, gmail, no download of mail sent).