authentication of connection iMessage

Similar Questions

• No authentication of connection - no connection not necessary

  Hello
  
  Acutally I won't have this login page and validation as I run the application.
  
  I tried to create no authentication of connection and make it current but his does not work.
  
  Any ideas?
  
  Thanks in advance.
  
  
  Kind regards
  Aurélien

  OK, in my personal workspace on apex.oracle.com, in the sample application.

  1. create the authentication scheme:

  1.1 click on create
  1.2 leave the default - "based on a pre-parameter schema of the gallery.
  1.3. do not select "No authentication (with the help of DAD)"
  1.4 give a name. I call usually mine "No. Auth".
  1.5 click on the button 'create plan '.

  2. before as I have change to the new regime, make sure application runs as expected. Click run. Because it's the example application, the authentication scheme is username: demo, password: the name of the workspace.

  OK, that connects as expected. I click sign out.

  3. change the current authentication to the newly created scheme.

  3.1 go back into the shared components-> authentication schemes.
  3.2. the way I usually do it is via the tab "current change.
  3.3. in the downgrade of decline for the field ' available authentication schemes: ", select the newly created scheme." In my case "No. Auth".
  3.4 confirmation page is displayed. Review and click "Make Current"

  (The alternative to this method, on the list of authentication schemes (report), there is a link click "Make Current" for the authentication scheme desired.) Click on that and then step 3.4 is displayed)

  4. check that it works.

  If you click on run after changing the current regime, it does not (well, at least he didn't the first time I tried)-it just outputs ' Location: ' on a blank white page, so come back to the application interface and click on run from there. At this point, everything works as expected for me.

• Developer SQL 4.1.2 uses Windows authentication to connect to SQL Server

  I'm using SQL Developer 4.1.2 and tries to connect to SQL Server through Windows authentication.  If I use SQL Server authentication, everything works so the jTDS driver appears to be installed and working properly (I use jTDS 1.2).  When I switch to Windows authentication, I get the error

  Status: Failure-Test failed: IO error: failure of the SSO: library Native SSPI has not loaded. Check the system java.library.path property.

  Of course, I googled the error and came up with dozens of people asking the same question and is told to move the ntlmauth.dll from the \SSO directory to the jTDS directory in various other directories.  That seems to work for others so for the last few hours, I was copying the DLL in each directory that I can find someone on the internet suggesting without success (I do restart SQL Developer each time).  In the Directory SQL Developer, I tried

  Developer c:\Oracle SQL 4.1.2.20.64\sqldeveloper

  Developer c:\Oracle SQL 4.1.2.20.64\sqldeveloper\sqldeveloper\bin

  Developer c:\Oracle SQL 4.1.2.20.64\sqldeveloper\jdk\jre\bin

  
  

  On the off chance that something was still making reference to a directory of a SQL Developer previous install, I put it in the same directories in the front THAT SQL Developer installed on this machine.  On the theory that she was using the FMV of the machine rather than that I downloaded and installed with SQL Developer, I advanced and dropped the DLL in the directory \bin for each installation of Java, that I could find on the system.

  
  

  c:\Program Files\Java\jrd1.8.0_45\bin

  C:\Program Files (x86)\Java\jre1.8.0_45\bin

  C:\Program Files (x86)\Java\jre1.8.0_60\bin

  
  

  Still no luck.  SQL Developer, I went to help. Everything | Properties and checked that the first way to java.library.path is what I expected and where I dropped the ntlmauth.dll first.  I even put it in c:\windows and c:\windows\system32 just to be sure.

  
  

  Java.Library.Path

  C:\Oracle SQL Developer 4.1.2.20.64\sqldeveloper\sqldeveloper\bin. C:\WINDOWS\Sun\Java\bin; C:\Windows\System32; C:\WINDOWS;

  
  

  Despite the DLL just about everywhere that I guess I would need to have it, I still get the same error.  I must be missing something obvious.  But at this point I was looking at it so long that I just can't see it.

  
  

  Justin
  

  
  

  
  

  I use SQL Developer 4.1.2 and tries to connect to SQL Server through Windows authentication using jTDS 1.2

  Not sure if this has anything to do with your problem, but according to jTDS - SQL Server and Sybase JDBC driver / newsand since SQL Developer 4.1.x requires Java 8, '' you should stick only to jTDS 1.2 If you need to use a version of Java before Java 7 '' . Perhaps using a version 1.3.x jTDS driver might help.

• How to put mod_tuxedo authentication to connect field of Tuxedo?

  Hello

  I'm trying to connect apache with mod_tuxedo to the 12cR2 with USER_AUTH Tuxedo domain. But all http requests does not tpninit error 8 in the apache log and in the journal of smoking are the password application error message.

  When I put no security side tuxedo, http calls are OK.

  Apache has basic auth with the file provider. I tried Smoking tpusr file and the file passwd apache with the same users and passwd - apache authenticate.

  How can I configure apache/mod_tuxedo connect field with USER_AUTH Tuxedo?

  I can't find documentation.

  Apache config - part

  < location ' / CSMW/WS / ">".

  User need valid

  Order allow, deny

  Satisfy all

  AuthType basic

  AuthName "Tuxedo WS.

  AuthBasicProvider file

  # AuthUserFile/srv/app/at1/mw/httpd/conf/passwd/passwords

  AuthUserFile/app/mw/tux/at1/tpusr

  < IfModule mod_tuxedo.c >

  SetHandler Tuxedo-script

  Tuxconfig "/ app/mw/tux/at1/conf/TUXCONFIG.

  TuxService ENTRYSOAP

  < / IfModule >

  < / location >

  Part of Tuxedo config

  * RESOURCES

  IPCKEY 160002

  NETWORKID TuxAT1

  MASTER TuxA, TuxB

  MAXGTT 5000

  MAXACCESSERS 8000

  MAXSERVERS 6000

  MAXSERVICES 14000

  MAXGROUPS 190

  MAXDRT 600

  MAXRFT 4

  MAXRTDATA 2000

  MODEL MP

  LDBAL Y

  PERM 0666

  USER_AUTH SECURITY

  LAN OPTIONS, MIGRATE

  DBBLFAILOVER 2

  
  

  ......

  
  

  
  

  AUTHSVR SRVID = 1000 SRVGRP = MAIN1 SEQUENCE = 95

  
  

  ......

  
  

  DEFAULT: SRVGRP = ESP1 MIN = 6 MAX = 10 CLOPT = "-o /app_log/mw/tux/at1/stdout.entrysoap EI /app_log/mw/tux/at1/stderr.entrysoap s TP_REQ1:SERVER - C conf/middleware.env s ENTRYSOAP" SEQUENCE = 33

  entrysoap = 6800 RQADDR SRVID = SOAPA01

  ......
  

  Apache config

  
  

  
  

  Log Apache

  [Game 28 mai 12:39: 05 2015] [error] mod_tuxedo: don't tpinit/app/mw/tux/at1/conf/TUXCONFIG: 8

  [Game 28 mai 12:40: 11 2015] [error] mod_tuxedo: don't tpinit/app/mw/tux/at1/conf/TUXCONFIG: 8

  [Game 28 mai 12:57: 41 2015] [error] mod_tuxedo: don't tpinit/app/mw/tux/at1/conf/TUXCONFIG: 8

  Journal of smoking

  
  

  125741.ttux1! httpd.5406.896858080.1: LIBTUX_CAT:6244: ERROR: Application password does not match

  125741.ttux1! httpd.5406.896858080.1: LIBTUX_CAT:6247: ERROR: could not establish the security context. Error code 60, minor_status 4294967289

  125741.ttux1! httpd.5406.896858080.1: LIBTUX_CAT:6234: ERROR: authentication fails with error 70

  Kind regards

  Michal Fürst

  Hi Michal,

  It is an ovesight in the implementation of mod_tuxedo.  If you need mod_tuxedo to run a tpinit() with the credentials of the user to a secure USER_AUTH area, please fill out a bug with My Oracle Support.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo

• ADF/authentication to connect using the security of ADF (with Page of custom Login)

  Hi all!

  I am trying to achieve a simple project where I need my Application users to open a session before access to these pages in the application.

  I found some tutorials, but most of them manually added user security, and I need them to be ONLY on the database, because I use a Web service to retrieve the data.

  Here is my business needs:

  • Create a custom Login page, requesting identification by name of user and password information
  • Extract data using the Webservice (this part is done)
  • If the data matches a Session must be opened.
  • Some data user as username, preferences... must be registered on a SessionBean
  • The session must be opened up to disconnection of the user or the timeout.

  Any tips/advice on how to set up the login page and follow the data Session and status?

  PS: Using jdev 12 c

  
  

  Best regards

  Luis Cabaco
  

  You can enable the ADF security in your application and configure the authenticator RDBMS on WLS.

  http://Biemond.blogspot.BA/2008/12/using-database-tables-as-authentication.html

  For the custom login page, see: https://docs.oracle.com/middleware/1213/adf/develop/adf-web-securing.htm#ADFFD2008

  Dario

• vMA 5.5 the session is not authenticated after connect you to the target ESXi

  Im trying to add targe ESXi 5.5:

  VI-admin@localhost:~ > vifp addserver esxi1 authpolicy - fpauth - username root - password Passw0rd

  VI-admin@localhost:~ > vifp mailing lists

  esxi1 ESXi

  VI-admin@localhost:~ > vifptarget s esxi1

  VI-admin@localhost:~[esxi1] > list of network adapter for the network esxcli

  Runtime error: the session is not authenticated.

  

  In the task of the vSphere client inform me about create users:

  

  

  but when im trying to execute commands remotely I get:

  
  

  Runtime error: the session is not authenticated.

  
  

  A suggestion?
  

  In this post, I answered my second question, and I think

  Re: vMA 5.5 error: cannot add users.

• authentication failed connecting to the adobe content viewer

  Mr President.

  When I login in my iPhone, the message came:

  failed authentication

  same email and password are 100% correct. Please give a solution

  Make sure you visit digital publishing.acrobat.com and agree to the terms here.

• Beta 2 - authentication for connections user [schema] issue special succeeded.

  Sorry for all the threads, tried many things. :)
  
  I have a special account of my DBA on the development server which gives me additional access to things and rocking also my diagram to the main with all tables, which makes the Assistant EF works much more reliably. It uses a username of the form user [schema] (in the above example it would be Tester [SOMESCHEMA]), which allows me to access the scheme in question.
  
  I found that this does not work in the managed provider. I'm username/password invalid logon denied when I try. Switch to the provider unmanaged, it works fine. I don't know if this is a bug or a known limit, so I thought it was worth notice. Here's the script that the DBA uses to create the account:
  

  CREATE USER tester IDENTIFIED BY somepassword;
  GRANT CREATE SESSION TO tester;
  ALTER USER SOMESCHEMA GRANT CONNECT THROUGH tester WITH ROLE RL_App_Connect, RL_App_Master_Prxy;

  RL_APP_CONNECT has: create session, alter session.
  RL_APP_MASTER_PRXY has: how to create, create synonym, create the view.
  
  Thank you!
  
  Published by: Tridus on April 17, 2013 09:46

  I was able to reproduce this problem and have filed a bug (16727322).

• Oracle UCM CIS - user authentication and connection to the virtual computer

  Hello
  
  I have a few questions. I'm trying to integrate the University Complutense of MADRID with my custom web application.
  
  (1) is it possible to authenticate users (password validation) if we use CIS to integrate. If this isn't the case, then if the server of the University Complutense of MADRID uses its own database backend and not no matter what LDAP for user management, must make us a call to the database table directly? Any idea on the table?
  
  (2) if I am trying to connect to a server of the University Complutense of MADRID that runs on a virtual machine, but in the local network, I always get an error like this.
  Failed to retrieve the configuration information for the content Terminal item. Permission denied. Address < < ip address > > ' is not an authorized remote socket address.
  However, if I connect to an instance of the AAU runs on a server instance, the same code is running.
  The server within the virtual machine console is accessible from my m/c through browser. So should I give access to this port to the socket connection 4444. Couldn't find anything on it. Any help will be appreciated.
  
  Thank you
  In depth.

  Hi deep,

  You can restrict access to the content server port 4444 using a filer of ip address in the /config/config.cfg file of

  There is a property called SocketHostAddressSecurityFilter

  You can for example set
  SocketHostAddressSecurityFilter = 192.168.1. * | 10.102.3.3 | localhost
  the list is led separate

  connections from addresses other than these raise the error that you have demonstrated

  Please consider maring this thread as answered if that solves the problem to help others facing the same

  Tim

  Please consider maring this thread as answered if that solves the problem to help others facing the same

  Published by: Tim Snell on December 15, 2010 07:57

• Authentication of connection Cisco AAA to shelf (MS IAS) Nexus 1000v

  Hey

  I have a link, I'll add to my radius for the logon server.

  On a sw IOS, I need to do more

  Number of attribute change to '1 '.
  Set the Format of the attribute to "String".
  Type "shell: priv-lvl = 15" in the value of the attribute field

  But should I put in the "shell", so I'll work on a Nexus 1000v

  Shell: roles = "network-admin".

  (or replace any role to assign the user to network-admin)

• Is it possible to have a secure FTP connection using private key authentication?

  Is it possible to have a secure FTP connection using private key authentication to connect to a folder on Business Catalyst?

  Hello

  Not available at this stage that the only options are in the article to Setup SFTP.

  - http://helpx.adobe.com/business-catalyst/partner/connecting-site-using-ftp-client.html

  Kind regards

  -Sidney

• VPN connection error - pppd limited

  Hi I think I have a problem with OX, the captain and the networks, I sail perfectly with the team but since update stops running the VPN, I tried the possibility to go to recovery mode to 'disable csrutil' then ' sudo chmod u + s / usr / sbin / pppd "but it does not work when you use Netextender or FortiClient." I have another Mac with Lion and works properly the only difference I notice in the file 'pppd' Captain makes me 'limited, compressed' and only 'compressed' Lion I put a photo and a newspaper of netextender:

  15/09/2016 10:15:59.271 [603 General info] NetExtender 8.1.788 for Mac OS X initialized

  15/09/2016 path of the bundle app NetExtender 10:15:59.299 [General info 603] = /Applications/NetExtender.app

  15/09/2016 createLogPanel() 10:16:01.045 [gui info 603]

  15/09/2016 10:16:01.730 [config info 603] loading saved profiles...

  15/09/2016 10:16:16.507 [connect info 603] user: "prueba".

  15/09/2016 10:16:16.507 [connect info 603] domain: "abcd.hos."

  15/09/2016 10:16:16.509 [connect info 603] Server: 'vpn.abcd.es:444 '.

  15/09/2016 10:16:16.581 [603 general notice] connection to vpn.abcd.es:444...

  15/09/2016 10:16:16.820 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:16.821 [General notice 603] retry...

  15/09/2016 10:16:16.822 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:16.823 [General error 603] authentication failed: connection failed. See the log for more details.

  15/09/2016 10:16:16.823 [General error 603] NetExtender connection failed.

  15/09/2016 10:16:16.823 [General notice 603] SSL VPN disconnect...

  15/09/2016 10:16:17.058 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:17.058 [General notice 603] retry...

  15/09/2016 10:16:17.060 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:17.061 [General error 603] disconnect command failed

  15/09/2016 10:16:17.063 [General notice 603] SSL VPN connection is completed.

  15/09/2016 10:16:17.063 [config info 603] loading saved profiles...

  15/09/2016 10:16:17.065 [gui info 603] connection failed. See the log for more details.

  

  I think that the problem is a network file or because I put the wrong password and I cannot detect this error. as I said the VPN working properly with another MAC using the same network.

  Help...

  You shouldn't be messing with the security features of the operating system.

  Problems may have to do with the network, or client software that you use.

  I start by making sure all the software are updated and then create a new entry, vpn, double control system that everything has been entered correctly.

  FWIW, I use the built-in features of VPN on El Capitan to connect to my University regularly and without problem.

  I'm not familiar with "Fortinet", and I suspect that you may need to be updated, or simply use the built-in VPN.

• iMessage on iPhone, iPad and Mac Mini issues

  So, here's a nice.

  Mac Mini, iPad Mini, iPhone5. All are on the latest versions of the OS. Connected to the identical services iCloud and iTunes on all three devices. The iPhone 5 is delivered to US, the others are the European Union (NL) issued.

  When I send an iMessage on the phone, the message sent is not the Mac Mini or Mini iPad. sent iMessages to iPad or Mac appear on both devices, but not on the phone.

  Incoming messages only appear on the phone, not on the other two aircraft.

  People receiving my messages of either the Mac Mini - combo of the iPad and the iPhone5, have two separate conversations in their messages, but an entry from me in their list of contacts.

  In iCloud online, all devices can be considered to be connected with the same account. All have been disconnected from iCloud, password has been changed and reconnected. All devices were restarted. All to nothing does not.

  Other services such as calendar function without any problem at all, an appointment has been made on what devices instantly extends to the two other devices. New contacts are shared between all the devices too. If the problem is limited to the iMessage.

  In short, I suspect there is a difference between EU and devices of the American unit, preventing them to be treated equally. Does anyone else have this problem or something similar?

  Post edited by: mackert

  Hello mackert,.

  Thank you for using communities Support from Apple. I know that Messages does not properly or sync with your devices is not what you expect. Based on what you said, it seems that you encounter some problems of synchronization with connected devices to your Apple for message ID. Good news is I had this problem myself and I solved this problem by following these steps:

  1. Firstly, you disconnect from your Apple ID for iMessage on all your devices. On your iOS devices, go to settings > Messages > Send and receive and sign for your Apple ID. Then go to settings > Messages and turn off of iMessage.

  2. on your Mac Mini, open messages, then go to the Messages menu > Preferences > accounts. Click your iMessage account in the left sidebar, and then click Sign Out and then sign out again.

  3. restart your devices as closing down and starting process is important to keep the software works correctly:

  Restart your iPhone, iPad or iPod touch

  How to turn on or off your Mac

  4. now sign in iMessage on your iPhone first. Go to settings > Messages, turn on iMessage and connect you to your Apple ID in settings > Messages > Send and receive. Make sure that you are successfully connected, iMessage is activated, and you see your phone number and e-mail available for both "you are reachable by iMessage to ' and"Start new conversations." That's because iMessage uses your iPhone SMS to activate iMessage on your Apple ID.

  If you get an error when you try to activate FaceTime or iMessage

  5. Once your iPhone has configuration iMessage, then sign into your other accounts and check the synchronization of Messages. You can also turn on "Text Message Forwarding" under settings > Messages on your iPhone to better ensure that all devices have the same messages.

  Use Messages with your iPhone, iPad or iPod touch

  Messages (El Capitan): Set up Messages

  Continuity of use to connect your iPhone, iPad, iPod touch and Mac

  See you soon!

• Help my Photosmart HP 7510 a wireless connection.

  Test report said trurn off MAC filtering. It was not on. Use WPA with AES. I am able to connect Blackberry, iPhone, Ipad, laptops with success, even SONY TV. I even tried to book the 198.162.0.111 IP address.  Routwer newspaper said 7510 authenticated and connected, but the error message on the printer itself.

  I just couldn't connect with the D-Link, even after updating the firmware. I bought a CISCO Linksys E3200 and the printer connected immediately.

• Remote access Windows Server 2012 through internet with desktop connection

  Summer messing about with it for days and don't get no love.

  Try to connect with Windows 7 Ultimate edition to Windows Server 2012 Data Center version from outside my home network, Starbucks or McDonald's or my server at home.

  Tried all these steps found in this promising and useful article:

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  1. Allow connections to the computer you want to access remotely. DONE - ADDED to THE SERVER AND NON-ADMIN ACCOUNT to RDP GROUP of ROLES, using network level authentication. Connection of Win 7, so this method of authentication should not be a problem, I assume.

  2. Make sure that remote desktop is able to communicate through your firewall. DONE - FOR BOTH PUBLIC AND PRIVATE RULE.

  3. Find the IP address of the computer on your home network you want to connect. MADE - by using the ipconfig/all command

  4. Open your router configuration screen and worms forward port 3389 for TCP IP address of the destination computer. DONE - NOT TCP/UDP but TCP only, internal and external port goes. Note: The use of a booster signal wifi at the end of the House, it is a problem that requires additional configuration? I don't think he has an ip address or acts as a router. But in desperation I can try unplugging then again head the local Starbucks to try to connect.

  5. Find the IP address of the router so that the remote desktop can be found on the Internet. DONE - using "what is my ip", pretty easy.

  6. Open Remote Desktop connection, and connect. ACTUALLY, I think THAT, IN ENTERING [ip router]: 3389.

  But the result of the message is always the typical:

  (1) remote access to the server is not enabled.

  > But this is not true, that I am capable of the DRC at home on the server machine.

  (2) computer remote is not off.

  > But this is not true, as I just left home 30 minutes and sometimes it's rarely, only restarted.

  (3) the remote computer is not available on the network.

  > Don't know what that means. Of course the remote computer is not on the network, I am on right now. It's on my home network. But I can ping my router ip via cmd, then coming to the outside can be done; through my router, I should be able to access inside my home network port forwarding w. But no love.

  So... what to do, what to do...

  The wifi booster is a problem?

  Connects to the Data Center edition a problem?

  What happens if I uncheck the option ' use authentication NLA, is that the passage of the security risk?

  Any ideas about the configuration I could be missing before giving up and go for VPN or TeamViewer. I would really like to see materialized during all the time that I put in trying to run the DRC.

  Thanks for any input.

  / Markus

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.