Authentication Proxy Service by group mode

Similar Questions

• Add Basic authentication to the Proxy Services in OSB

  Hello
  
  I just need to add basic (browser pop-up with usr and pwd) authentication to a proxy service.
  
  How can I do?
  
  Thank you!!

  For an HTTP service choose the HTTP Transport label, and then select Basic for the authentication property.

• using weblogic unit-of-order (PUA) in the osb proxy service

  Hello
  
  I have a deployed on Weblogic server JMS queue. The messages in the queue are grouped using Weblogic JMS_BEA_Unit-of-order (PUA).
  
  Now, I have an OSB 10 g of Proxy Service that reads messages from the queue. The problem is, upon receipt of a message, acknowledgement of receipt is sent immediately, thus eliminating the message from the queue and the next with the same unit-Of-Order message is ready for processing.
  
  But the business scenario is the first message to read, processed and then decide to recognise or not. The second message should not be interpreted, unless the previous message is processed successfully.
  
  Can someone help with this scenario?
  
  Thank you
  Alex
  
  Published by: user9024636 on February 11, 2010 02:57

  with PUA, you'll need to do the syschronous transaction.
  1. make transacation enable XA
  2 using the road for the sychrounous transaction
  3. use the routing options, and then select mode = request-respone
  4. If the Proxy service is based on the jms then you should also together WHAT JMS Transport-> Advance settings-> XA is required-> checked

  Kind regards
  http://SOA-Street.blogspot.com

• No Internet access. error 1747. and the dependency service or group could not start

  Have a laptop dell inspiron 1545 with vista (build 6002: service pack 2).  Have a wireless network at home.  laptop stopped connecting to the network 2 weeks ago.  When I try, I get a message "dependency service or group was able to start.  When I go to manage networks, there is no detected networks.  Cable internet access also does not work with this laptop. cards (minimap dell 1397 Wireless) wireless and ethernet say thet controller work correctly.  2 other laptops in the House are normally working on the network.  Reviewing service autoconfiguration WLAN and Wired AutoConfig and when I try to start the two ths get message... "Error 1747 the Authentication Service is unknown".  Another little thing, I noted... isatap.home don't works do not-message says to download the drivers- but not on net so cant)... don't know if this is related.

  can you help me?  Thank you, Aodhanm.

  I just wanted to post that I used the

  netsh winsock reset

  command to fix this same error 1747 known when you try to manually start the WLAN
  on a Windows 7 Pro computer.

  After a restart it worked fine.

  Chuck
  NerdForce.com tech

• State of the unknown connection, dependency service or group do not start.

  Original title: unable to connect to the internet.

  I can't connect to the internet. He said unknown state with a Red Cross of the connection and the dependency service or group does not start. My diagnostic policy Service stopped and can not turn on the firewall

  Hello

  -What security software is installed on your computer?

  I suggest you perform the methods mentioned below.

  Method 1: Security Microsoft scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Safety Scanner WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2: Enable disabled services and start the services.

  To enable the disabled services and start the services:

  a. click Start, type services.msc in the box start the search.

  b. Select Services in the programs list. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  c. right click on phone and then click Properties.

  d. under the general tab, click Manual next to startup type.

  e. under the general tab, click Start under the Service status and then click OK.

  f. Repeat steps 3 to 5 for service remote access connection manager and Remote Access Auto Connection Manager service.

  Method 3: Remove unwanted entries from EAP (Extensible Authentication Protocol) of the register.

  ESTABLISHMENT OF THE REGISTRY:

  Serious problems can occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

  a. click Start, type regedit in the box start the search.

  b. Select regedit list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  c. navigate to the location HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan\PPP\EAP

  d. identify the subkey used by your modem.

  e. remove the other subkeys other than the default (13, 25 and 26 are by default).

  Method 4: If the methods above does not help then I suggest you perform the restoration of the system to the point when the service worked very well.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Hope this information is helpful

• Connection status: unknown. The dependency service or group was able to start.

  Greetings!  I have a year old Dell Inspiron.  Everything worked fine last night, but when I woke today I couldn't connect to the internet.  When I put the cursor on the network icon, it says "connection status: unknown."  The dependency service or group was able to start. "My Windows Firewall is also disabled and I can't activate it automatically or manually.  In addition, the Windows Diagnostic tool cannot be turned on, and whenever I try to activate the Diagnostic Policy Service it also can not be done. It says "error 5: access is denied" when I try to turn it on manually.

  My antivirus (Avira) software is fully up to date from last night.  I even took it into Best Buy and they did a diagnostic test to ensure that a virus is not the cause.  The guy there said it was a software problem.  I tried resetting TCP/IP (netsh winsock reset) without success.  I also tried sfc/scannow in safe mode and windows without success.  Are there other options?

  Thanks in advance.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• Network is inactive: the dependency service or group could not start

  After you install windows vista sp1 on my new computer dell laptop, network lan connection is not active and when the mouse via the network sign in the notification area in the taskbar, the following error message appears:

  The dependency service or group was able to start.

  When you check the services, I found the following services should be started automatically but currently has started:

  DHCP client
  Network list service
  Network location awareness service
  NTRU TSS v1.2.1.27 tcs

  When you try to start one of them, get the error that the dependency service is not provided on except this one:

  Network location awareness, trying, start getting the following error: Windows cannt start local service...

  I checked the event log and found a number of errors like:

  -----------------
  Failed to initialize the Security Kerberos for authentication package on the server side. The data field contains the error number.

  -----------------

  The network location awareness service stopped with the special service 3221226008 (0xC0000218) error.

  --------------------------

  The volume shadow copy Service error: error unexpected mark of the IVssWriterCallback interface. HR = 0 x 80070005. This is often caused by incorrect security settings in the process of the writer or the applicant.

  Operation:

  Data collection of Writer

  Context:

  Writer class ID: {e8132975-6f93-4464-a53e-1050253ae220}

  Author name: System Writer

  Writer Instance ID: {855aa7e1-4b71-4448-bae8-84e347d26b85}

  -----------------------

  Network list Service service depends on the network location awareness service which failed to start because of the following error:

  The service has returned a service-specific error code.

  --------------------------

  NTRU TSS v1.2.1.27 TCS depends on the TPM Base Services service which failed to start because of the following error:

  The service has not been started.

  -----------------------------

  The network location awareness service stopped with the special service 3221226008 (0xC0000218) error.

  And this last error repeats several times...

  Please help solve this problem as soon as you can, its really serios error.

  Awahaba

  This article explains how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista. It describes how to use the System File Checker tool to analyze and replace system files in scenarios where you are troubleshooting a problem in Windows Vista: http://support.microsoft.com/kb/936212/

  You might analyze you the computer to check for malicious software that could of damaged service this type are suggested anti-malware analysis: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/fa30853d-719a-4265-9e7b-9287567d31e3

  Please let us know Justin M. Microsoft Support Engineer Answers visit our Microsoft answers feedback Forumand let us know what you think.

• Unable to connect to networks wireless on laptop Windows 7 Enterprise. Cannot start the autoconfiguration WLAN service. "Error 1068: the dependency service or group could start."

  original title: cannot start service autoconfiguration WLAN and EAP services

  I am not able to connect to my wireless network. When tried to connect, it shows just "unable to connect."

  I have the Intel WiFiLink 5100 adapter with the latest driver for Windows 7 Enterprise 32-bit installed. The laptop is not a wireless connection manager and I am trying to connect using the Windows wireless connection manager.

  I checked in the Services and found that service autoconfiguration WLAN and Extensible Authentication Protocol services are not running.

  When I tried to start the WLAN auto configuration service, I get the following error...
       Windows could not start the service WLAN autoconfiguration on Local computer.
       Error 1068: The dependency service or group could start.

  When I tried to start the service of Extensible Authentication Protocol, I get this error...
       Windows could not start the service on Local computer Extensible Authentication Protocol.
       Error 1053: The service did not demand launch or timely control.

  I found that all dependent services for the EAP are running. And all dependent services for autoconfiguration WLAN service are running except the EAP service.

  I searched the internet for the solution madly before posting here. Any help is greatly appreciated!

  Take a look at this > http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/f9b835f2-c2da-43b9-883f-2b2a157c3921

  This link has the solution that worked for me.

• Message access control in the OSB proxy service when the Service Type is the Any SOAP Service

  Hello

  We have a proxy OSB service where the Service Type is 'no matter what SOAP Service'. We use Auth.xml to authenticate messages to achieve this proxy service.

  It is, ca we apply Message this proxy access control so that only user A is allowed to sent message has and only user B is allowed to message sent B?

  Us know if the proxy OSB service is based on a wsdl, then we can apply access control message for each operation in the Security tab - and thus specify which user can access the operation. But unfortunately, we have not a wsdl, because this service proxy is a proxy gateway and must accept any SOAP message reaches.

  For example, if the user name in the SOAP header is msgAUser, get is accepted.

  "< soapenv:Envelope xmlns:soapenv ="http://schemas.xmlsoap.org/soap/envelope/">"

  < soapenv:Header >

  "< xmlns:wsse wsse: Security ="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">."

  < wsse: UsernameToken >

  < wsse:Username >msgAUser< / wsse:Username >

  < wsse:Password >msgApwd< / wsse:Password >

  < / wsse: UsernameToken >

  < / wsse: Security >

  < / soapenv:Header >

  < soapenv:Body >

  <Get>

  ...

  < /Get>

  < / soapenv:Body >

  < / soapenv:Envelope >

  If the user name in the SOAP header is msgBUser, then MessageB is accepted.

  "< soapenv:Envelope xmlns:soapenv ="http://schemas.xmlsoap.org/soap/envelope/">"

  < soapenv:Header >

  "< xmlns:wsse wsse: Security ="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">."

  < wsse: UsernameToken >

  < wsse:Username >msgBUser< / wsse:Username >

  < wsse:Password >msgBpwd< / wsse:Password >

  < / wsse: UsernameToken >

  < / wsse: Security >

  < / soapenv:Header >

  < soapenv:Body >

  <MessageB>

  ...

  < /MessageB>

  < / soapenv:Body >

  < / soapenv:Envelope >

  Any suggestions please?

  Understood.

  My current client, we have faced the same problem and implemented a similar design which nevertheless has important benefits.

  The problem with proxy input all SOAP is not only in the complexities of authentication. Most important, resources fine grain (thread) management becomes impossible: proxy entry has a workmanager, one constraint of son max. If any single service behind entered proxy knows an influx of requests (because of a peak or a misconfigured customer), he eats the workmanager dry and the rest of the services become too inadmissible.

  In this spirit, we have implemented the following diagram. It's a little more complicated, but it serves us well for a few years already:

  EntryProxy 1-> Interceptor entering Proxy-> Proxy 1

  EntryProxy 2-> Interceptor entering Proxy-> Proxy 2

  ...

  Enter proxy doesn't do Nothing but shall forward the request for interception of incoming traffic. Power of Attorney of the entry, however, has its own WSDL, authentication and the workmanager which allows precise control.

  Another important aspect of a proxy of the entry, it is that it passes a custom header containing the name of the destination of the interceptor, e.g. TargetURI = "ProxyService/Paypal/Paypal.

  Incoming Interceptor Proxy performs all recording, the error handling and other common tasks.

  Then, according to the last header, the proxy of the interceptor makes a dynamic call to route to the specified destination.

  Yes, this design has an additional moving part - a proxy entry - but he a) works b) guard control all in our hands. The entry proxy is a very small point; When I need to make a new one, I just copy an existing one and replace the WSDL file and the value of the TargetURI - 30 seconds of work.

  Hope that helps.

  Vlad

  http://vladimirdyuzhev.com

• How the proxy service can get the client certificate in Oracle Service Bus

  Hello everyone, now I'm confused in how can get service proxy client certificate in Oracle Service Bus. I have configured bidirectional SSL in Weblogic, the client sends its cerficate to Weblogic and Weblogic checks this cerficate if have access permissions Weblogic, but my proxy service cannot obtain this certificate to do more work, who can help me?
  And my proxy service service type is the messaging service.
  
  Thank you!!!
  Sea

  Hi, if you have configured for client certificate authentication, weblogic maps an attribute in the DN of the client certificate to a user of weblogic security realm. The attribute is controlled by the default configuration to map the user in the default identity asserter in the WLS Console--> security--> kingdoms--> suppliers--> default identity Asserter. Generally, the CN attribute is selected for this purpose. You must also create a user in the security field, with the value of this attribute in the client certificate for authentication to succeed. Once the authentication is successful, the user is used as the authenticated user. So if you want to set permissions for authorization on the proxy, you can do it based on this user. For this you need not the certificate of the client. In the pipeline of message, I guess you can get the authenticated user of $inbound, which in turn corresponds to an attribute in the DN of the client certificate.

• install problem - c:\users\ &lt; NAME &gt; \appdata\local\temp\7zS171C.tmp\setup.exe the dependency service or group was able to start

  I use Win 8. I recently uninstalled Firefox on C: and am looking to reinstall on F:

  I downloaded the installation package full https://www.mozilla.org/en-US/firefox/new/?utm_source=firefox-com & utm_medium = referral, but when I ran the installation package, I got a popup window after the extracted package:

  c:\Users\ < NAME > \appdata\local\temp\7zS171C.tmp\setup.exe
  The dependency service or group could not start

  Any ideas?

  You may need to temporarily disable your security software (antivirus).

• Print Spooler error 1068: the dependency service or group could start. __

  I tried - unsuccessfully - restart the print spooler on a box of XP with SP3.  I read the previous posts for this error and this box refuses to restart the service.

  Is there an easy way to fix this without reverting to a system reset?  Can I run a repair?  If so, it will fix the problem?  I tried to run a restore of the system to a previous date and who could not do anything for me either.

  When you attempt to start the Print Spooler Service, error 1068 means "the dependency service does not exist. the dependency service or group was able to start. »

  Depending on your environment and your type of printer installed, your Print Spooler Service will have other dependent services that must run before the Print Spooler Service starts.  If the dependent services do not work, you will see an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  Some Lexmark printers add their own XP services and start the Print Spooler Service, lists them as dependencies and that is why these Lexmark Services must run before the print service spooler will begin.  It may be listed as the LexBce Server.

  You now or have you ever have all installed Lexmark printers?  If Yes, do you still use Lexmark printers?

  Depending on your printing environment, if you use another type of printer, you can have other Service listed tab in the Print Spooler Service dependencies.

  Use the Applet of Services XP to check the dependencies of print spooler and options.

  Click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet.

  Locate the Print Spooler Service, right-click, choose Properties, and then look at the Dependencies tab.  Services listed there must run before the Print Spooler Service starts.  If they don't, you'll get an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  You should always see the service remote procedure call (RPC) and maybe a few others depending on the type of printer that you have installed (Lexmark printers can add some dependency Services to your configuration of XP).  All dependent services must run before the Print Spooler Service starts.

  Dependent Services may vary according to the type of printer that you have installed.

  The RPC service is also required for many other things to work properly and is usually still running and the autostart value.

  If the RPC Service does not work and does not start automatically, you can have other problems, but start with the easy stuff first.

  Of the Services Applet, find the service remote procedure call (RPC) and if it does not, right-click and start it and set it to automatic.

  Then find and all the other print spooler dependency services listed in the Print Spooler Service Dependencies tab.  They will be lance automatically the next time you reboot your system (if that is your desire), set the startup type for these Services to automatic.

  When everything works as you want, restart and check your Services again to be sure that they start correctly and solve any addition
  questions.

  If the remote procedure call (RPC) service is not listed as a dependency for your Print Spooler Service, you must inform XP that the print spooler service depends on the RPC service.

  Click Start, run, and in the box type (including important space after the "equal" sign):

  dependent on the spooler of sc config = RPCSS

  Click OK to assign the RPC service for the print spooler service, and then make sure that the RPC Service is running and start your Print Spooler Service.

  If you still can not understand it, react with the items that you see the tab of the Print Spooler Service dependencies.

  Don't forget to restart and check that everything works correctly after each adjustment.

  Please note that using the above command will effectively remove all the current (and perhaps old) Print Spooler dependency assigned for the Print Spooler Service and assign it only dependent on the RPC Service.  It would be 'normal '.

  The dependence of CPP Service would be typical of most facilities, or after you have uninstalled all the time some printers (Lexmark), but your printer may have a few other dependencies.  If it still does not respond, we'll fix it!

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• What dependency service or group must be enabled for ICS start the firewall can be turned on

  Uninstalled BitDefender 2012 and installed Microsoft Security Essentials.  I tried to activate Windows Firewall and got: "Windows Firewall setting cannot be displayed because the associated service is not running. You want to start the Windows Firewall / ICS (ICS) service. Press Yes and I get Windows cannot start the Windows Firewall / ICS (ICS) service. This option is OK. Hit that and I will return to the window Security Center in Control Panel. Tried to manually turn on ICS and got error 1068: the dependency service or group could start. What service and / or the Group?

  It was more than a notice of an answer to the question I posted earlier to not be able to activate Windows Firewall once I uninstalled Bit Defender and installed MS Essentials.  Sorry that if I crossed all the protocols forum this is my second attempt to get a question an answer, luckly I kind of figured it by myself.  Thanks for the response if and the offer of future assistance.

  I you merge your two threads, but your problem is perhaps due to incomplete removal of BitDefender.

  -steve

• Unable to connect to the web proxy/services

  Unable to connect to the web proxy/services used for officejet pro 8600 as well as using verizon fios actiontec router.  I tried wireless and ethernet.  Connectivity seems good.

  Resolved.  Port forwarding blocked by another application of verizonwebcamera problem.

• Unable to start Windows Media pPlayer 11 to share media: Error 1068 dependency service or group could not start

  1068

  Cannot start media player 11 to share media. Error 1068: the dependency service or group could not start

  Hello! I found the solution to my problem here:

  http://wiki.answers.com/Q/Why_do_I_get_an_Error_1068_when_I_try_to_share_my_media_in_WMP11_in_WXP_pro_sp2_start_service_in_services

  It is possible that it would be more useful for someone.