Authorization for each VM (best practices)

Similar Questions

• looking for a networking best practices publication

  The following quote re ESX host network configuration came from one of our technical pre-sales representatives IBM in the Vancouver area...

  "IBM and VMware have long have jointly published a best practice of the 2 Ethernet interfaces (1 Gb/s each) have teamed up for a redundancy and bandwidth - separated into 3 VLANs - to serve the three channels (management, vmotion and vmnetwork).

  Someone at - it a link to this document?  I can't seem to find it, and I really want to read.

  Thank you.

  Hello

  Did not see the document you are looking for, but if you want to learn more about some different network configurations have a look here:

  http://www.NetworkWorld.com/community/blog/7119

  -Pal-André

• Upgrading ESX 3.0.2 for 3.5 - best practices and tips

  Hello

  I am currently managing a virtual environment running on ESX 3.0.2 and VC 2.0.2. I intend to upgrade this year to ESX 3.5 and VC 2.5. Anyone know where I can find information on best practices to upgrade and / or a document of instructions that will take me through the process? I had a glance on the VMWare Web site but cannot find anything.

  See you soon

  G

  I have attached a document with this information.

  First of all you must upgrade the VC and the database, then you must upgrade from ESX.

  Kind regards.

• Best practices to configure NLB for Secure Gateway and Web access

  Hi team,

  I'm vworksapce the facility and looking for guidance on best practices on NLB with webaccess and secure gateway. My hosted environment is Hyper-v 2012R2

  My first request is it must be configure NLB, firstly that the role of set up or vice versa.

  do we not have any document of best practice to configure NLB with 2 node web access server.

  Hello

  This video series has been created for 7.5 and 2008r2 but must still be valid for what you are doing today:

  https://support.software.Dell.com/vWorkspace/KB/87780

  Thank you, Andrew.

• Best practices for the application of page multi Landscape/Portrait

  Hello
  I am looking for information on track to develop auto guide demand in pure actionscript with new components of qnx.fuse, but there is not a good example in real code. Every time I tried to make it resizable layout to get deformated fluid only components in portrait or landscape mode.

  I have a simple application with the point main and 3 displays:

  public class Main extends NavigatorSprite
  {
      public function Main()
      {
          addEventListener(Event.ADDED_TO_STAGE, init); 
  
          stage.nativeWindow.visible = true;
          stage.scaleMode = StageScaleMode.NO_SCALE;
          stage.align = StageAlign.TOP_LEFT;
          stage.nativeWindow.activate();
      }
      private function init(e:Event):void
      {
          removeEventListener(Event.ADDED_TO_STAGE, init);
          navigator.pushView(View1);
      }
  }
  
  public class View1 extends ViewSprite
  {
  
      private var container:Container;
      private var button_two:LabelButton;
      private var button_three:LabelButton;
  
      public function View1
      {
          addEventListener(Event.ADDED_TO_STAGE, init);
      }
  
      private function init(e:Event):void
      {
          removeEventListener(Event.ADDED_TO_STAGE, init);
  
          container = new Container();
          var layout:RowLayout = new RowLayout();
          container.layout = layout;
  
          button_two = new LabelButton();
          button_two.label = "to page 2";
          button_two.width = 150;
          button_two.height = 45;
          button_two.addEventListener(MouseEvent.CLICK, handleTwoClicked);
          container.addChild(button_two);
  
          button_three = new LabelButton();
          button_three.label = "to page 3";
          button_three.width = 150;
          button_three.height = 45;
          button_three.addEventListener(MouseEvent.CLICK, handleThreeClicked);
          container.addChild(button_three);
  
          addChild(container);
      } 
  
      private function handleTwoClicked(e:Event):void
      {
          navigator.pushView(View2);
      }
  
      private function handleThreeClicked(e:Event):void
      {
          navigator.pushView(View3);
      }
  }
  
  public class View2 extends ViewSprite
  {
  
      private var container:Container;
      private var back:BackButton;
  
      public function View2
      {
          addEventListener(Event.ADDED_TO_STAGE, init);
      }
  
      private function init(e:Event):void
      {
          removeEventListener(Event.ADDED_TO_STAGE, init);
  
          container = new Container();
          var layout:RowLayout = new RowLayout();
          container.layout = layout;
  
          back = new BackButton();
          back.label = "Back";
          back.width = 100;
          back.height = 45;
          back.addEventListener(MouseEvent.CLICK, goBack);
          container.addChild(back);
  
          addChild(container);
      } 
  
      private function goBack(e:Event):void
      {
          navigator.popView();
      }
  }
  
  public class View3 extends ViewSprite
  {
  
      private var container:Container;
      private var back:BackButton;
  
      public function View3
      {
          addEventListener(Event.ADDED_TO_STAGE, init);
      }
  
      private function init(e:Event):void
      {
          removeEventListener(Event.ADDED_TO_STAGE, init);
  
          container = new Container();
          var layout:RowLayout = new RowLayout();
          container.layout = layout;
  
          back = new BackButton();
          back.label = "Back";
          back.width = 100;
          back.height = 45;
          back.addEventListener(MouseEvent.CLICK, goBack);
          container.addChild(back);
  
          addChild(container);
      } 
  
      private function goBack(e:Event):void
      {
          navigator.popView();
      }
  }
  

  Is there for example some best practices how to modify this code to have pages and components with the same sizes in portrait and landscape? On presentation buttons size always 150 width and height 45 and wil containers have stageWidth and stageHeight.

  Thank you if someone could help with this problem

  Hello

  Try listening to a shift in focus screen with this code:

  stage.addEventListener(Event.RESIZE, onResizeHandler, false, 0, true);
  

  You can only change the width/height of your components to the event based on the width/height of the floor.

  I will guard against specifying specific sizes, if you want your code to work on devices BB10. I recommend using %'s.

  Kind regards

  Dustin

• HTML and CSS best practices for Eloqua?

  Hello Topliners community,

  My name is Ben and I am a Web Designer. Currently looking for guidance on best practices in HTML and CSS when you work with Eloqua. I am interested in best practices for email and landing pages.

  Thank you

  Ben

  For landing pages, you can use a bit of HTML, CSS, and Javascript like on any other page. For example, we use the Bootstrap on a couple of our Eloqua landing pages.

  Support for HTML and CSS is much more limited. It is one of the best resources I've seen for CSS support:

  http://www.campaignmonitor.com/CSS/

• Just updated to CC, 2014. Interested in best practices for conversion INDD high-resolution print layout of files .jpeg for use on a preview of portfolio site

  Looking for recommendations on best practices to Convert docs INDD Hi-res to .jpgs for web portfolio magazines

  Export to a PDF file in high resolution, then do your conversion in Photoshop where you have more control.

• BEST PRACTICES FOR PL/SQL

  Hi all
  I'm looking for advice on best practices to create c# applications that have Oracle as backend.
  I noticed this insertion, update, and delete procedures are not so dynamic because they are static:
  
  Insertion procedure:

   Create or replace procedure insertion (param1 in varchar2 default '', 
  param2 in number default 0, param3 in float default 0,
   table_to_insert in varchar2, Some_error out varchar2) is
  begin
  if (table_to_insert='table1_spec') then
  insert into table1 (val1,val2,val3) values (param1, param2,param3);
  elsif (ect) then
  .
  .
  .
  end;
  /

  Updated and delete procedures also have the same behavior, I wonder if you use a cursor to do more dynamic values return and the use of native dynamic SQL could not help the developers and I have to have something more dynamic.
  Kind regards
  
  Published by: user650358 on June 9, 2011 08:37

  user650358 wrote:

  I'm looking for advice on best practices to create c# applications that have Oracle as backend.

  What John said. (even if I would have been more blunt and used the expression "+ approach silly +" several times) {noformat} ;-) {noformat}

  The most flexible approach is to abstract the complexities of SQL, the relational database and the physical implementation of it, of the code c# developer.

  No need to know the database design, the joints, the structures table, SQL and others. Instead the abstract layer takes care of that - where this layer is a suite of packages of PL/SQL procedures and functions.

  As the c# developer would use the Win32 API for creating threads, or the use of Sockets of Win, it now uses the layer of abstraction of PL/SQL in a similar way.

  You want to add an invoice? No need to know the name of the table, the structure of the table and SQL - c# code calls simply the CreateInvoice()PL/SQL procedure.

  This code performs the validation. Business rules and logic. The SQL.

  More, the underlying database model can change, the new rules of business introduced and so on - and the call from c# to CreateInvoice() will remain the same and the c# code not affected by these changes in dorsal.

  Oh yes - it does not using PL/SQL code to extract data from line in the PL/SQL variables and then push these data in turn to the c# client code.

  It means that a procedure or a function like GetCustomertInvoices() returns a ref cursor to the appellant to consume. (the SQL to create the slider is abstract - not the actual slider itself because it is correct the only way to access the data in row SQL)

• Recommendations or best practices configuration Oracle HTTP Server Oracle Webcenter 11g Portal

  Hello everyone.

  I'm looking for recommendations or best practices configuration Oracle HTTP Server Oracle Webcenter 11 g Portal

  I appreciate if you could give me some references and/or experiences.

  Thank you very much in advance.

  Best regards.

  Configurations may vary depends on place on your needs, in general you can see Configuration high availability for the Web - 11 g Release 1 (11.1.1) layer components

  Use the configuration WebTier documents to the address above if it is sufficient for your needs.

• Types of discs DC Win2008R2 best practices...

  Hello

  I am trying to upgrade my AD environmental to 2008R2 victory, and I ask for feedback on best practices for the selection of the disk type and the parameters of the virtual machine.  I intend to install new scratch and transfer AD ads and much more thereafter.

  I intend to create a volume of 50Gb for the OS itself and a 200 GB volume for departure records and other data to the user.

  In a virtual environment, it is adviceable to locate the sysvol and AD database in a separate location other than the default system drive?

  For my 50 GB disk OS (domain controller), is this normal / good practice to store it with its virtual machine?

  My drive 200 GB of user data should ideally be able to reassign to another VM intact to keep the data in case of failure.

  Which drive 'provisioning' would be normal to use with these types of discs?

  What disc 'mode' (independent / persistent) it would be normal to specify in this scenario?

  When such a virtual disk is created, is it possible to increase / decrease its size?

  Thank you very much for the comments on these issues.

  Best regards

  Tor

  Hello.

  In a virtual environment, it is adviceable to locate the sysvol and AD database in a separate location other than the default system drive?

  Yes, follow the same best practices as you would in the physical environment here.

  For my 50 GB disk OS (domain controller), is this normal / good practice to store it with its virtual machine?

  Probably yes.  Why would you consider storing elsewhere?  You do something with SAN replication or y at - there a reason?

  Which drive 'provisioning' would be normal to use with these types of discs?

  I tend to use thin for the volumes to the OS.  For the absolute best performance, you can go with thick-eager discs set to zero.  If you're talking about data sharing standard file for users, then all disc types would probably be fine.  Check it out "[study of the performance of VMware vStorage Thin Provisioning | ]. "[http://www.VMware.com/PDF/vsp_4_thinprov_perf.pdf]" for more information.

  What disc 'mode' (independent / persistent) it would be normal to specify in this scenario?

  This can depend on how you back up the server, but I guess you wouldn't use not independent.  If you do, make sure you use persistent, you do not want to lose user data.

  When such a virtual disk is created, is it possible to increase / decrease its size?

  The increase is very easy with vSphere and 2008.  Very easy, and it can be done without interruption.  Shrinkage is a more convoluted process and will most likely require a manual intervention and downtime on your part.

  Good luck!

• ESX 3.5 and SQL best practices

  I searched for info on best practices when deploying SQL on the virtual computer. We already have a couple of lightweight SQL production servers running 2008 x 64 and SQL 2005. We are looking for migrating databases existing physical servers to a 2008 newly deployed x 64 SQL VM, I was able to find documents of Vmware and turned to the forum and information. This are not the giant databases - of things such as BES, EPolicy and other mundane but necessary databases. Even more to divide readers to separate newspapers, the sys and databases? Any advice would be appreciated.

  Take a look on:

  Best Practices for SQL Server

  http://www.VMware.com/files/PDF/solutions/sql_server_virtual_bp.PDF

  http://www.VMware.com/files/PDF/SQLServerWorkloads.PDF

  André

• Just improved m tips on best practices for sharing files on a Server 2008 std.

  The field contains about 15 machines with two domain controllers, one's data is the app files / print etc...  I just upgraded from 2003 to 2008 and want to get advice on best practices for the establishment of a group of file sharing. Basically I want each user to have their their own records, but also a staff; folder. Since I am usually accustomed to using windows Explorer, I would like to know if these actions can be done in the best conditions. Also I noticed on 2008 there is a feature of contacts. How can it be used? I would like to message or send an email to users their file locations. Also, I want to implement an admin at a lower level to handle the actions without making them far in on the server, not sure.

  I read a certain bbut I don't like test direct more because it can cause problems. So basically a way short and neat to manage shares using the MMC, as well as the way that I approach their mail from the server of their actions. Maybe what kind of access cintrol or permissions are suitable also for documents. Also how can I have them use office templates without changing the format of the model.

  THX

  g

  Hello 996vtwin,

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server and would be better suited to the Windows Server TechNet community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Best practices for vsphere 5.1

  where can I find the doc more up-to-date about berries EQL configuration / best practices with vmware vsphere 5.1

  Hello

  Here is a link to a PDF file that covers best practices for ESXi and EQL.

  Best EqualLogic practices ESX

  en.Community.Dell.com/.../20434601.aspx

  This doc mentions specifically that the storage Heartbeat VMKernel port is no longer necessary with ESXi v5.1.  VMware has corrected the problem that made it necessary.

  If you add it to a 5.1 system it will not hurt.  It will take an IP address for each node.

  If you upgrade 5.0 to 5.1, you can delete it later.

  Here is a link to VMware which addresses this issue and has links to other Dell documents which confirm also that it is fixed in 5.1.

  KB.VMware.com/.../Search.do

  Kind regards

• to access the QML attached objects in C++ and best practices for the handling of the user interface in classes

  Hello

  I have in fact 2 queries

  (1) how can we access attachedobjects defined in QML in C++?

  (2) I'm loving development on Blackberry 10 C++ is one of my favorites. But I'm a bit lost when it comes to managing the user interface in classes. For example when we create the project through momentics we have a class called ApplicationUI. It manages all the (default) user interface commands, we in C++. as for example creating the document qml and setting as root user interface, etc. I am now working on an app that have NavigationPane as root, and then I continue to push pages (like the screens). But now the code for all pages is inside my ApplicationUI. What is the best practice to keep the UI for each page logic in a separte C++ class?

  I also develop for Android that a separate class for each activity, this code does not mingle for each activity. Please guide me how can I keep logic of user interface of each Page into a separate class of C++?

  regarding your second question:
  I think this is the simplest approach to keep all things in the UI in QML. You can easily put things into separate files.

  If you want to use c ++ to the user interface: can be done, too. just put it in separate classes and include those in your application class.

• Best practices for the configuration of virtual drive on NGC

  Hello

  I have two C210 M2 Server with 6G of LSI MegaRAID 9261-8i card with 10 each 135 GB HDDs. When I tried the automatic selection of the RAID configuration, the system has created a virtual disk with RAID 6. My concern is that the best practice is to configure the virtual drive? Is - RAID 1 and RAID5 or all in a single drive with RAID6? Any help will be appreciated.

  Thank you.

  Since you've decided to have the CPU on the server apps, voice applications have specified their recommendations here.

  http://docwiki.Cisco.com/wiki/Tested_Reference_Configurations_%28TRC%29

  I think that your server C210 specifications might be corresponding TRC #1, where you need to have

  RAID 1 - first two drives for VMware

  RAID 5 - 8 hard drives within the data store for virtual machines (CUCM and CUC)

  HTH

  Padma