Auto execution after SSLVPN Login URL.

Similar Questions

• Yet WT8-A-102 screen auto rotation after update not

  Yet WT8-A-102 screen auto rotation after update not
  I have re installed the drivers

  Now the Tablet does not start-> error - system thread unhandled exception

  The system Thread Exception BSOD error unhandled in Windows 8 arises especially due to incompatible or old graphics card drivers.

  I assume that you have installed drivers that were not compatible
  To solve this problem I recommend you choose the Windows repair procedure

  You should start the tablet in the menu boot device
  Press on and hold the flight button + and hold also the power button until the device turns on and the boot device selection menu appears.

  Now you should be able to choose the option of HARD drive recovery.
  Then choose troubleshooting and got advanced options
  Here, you should be able to repair the system automatically.

  Useful info:
  http://APS2.toshiba-tro.de/KB0/HTD4103K90000R01.htm

• How the Boolean value off the coast in the system bell auto College after 5 seconds?

  How the Boolean value off the coast in the system bell auto College after 5 seconds?... and also the Bell has to ring only the days... Please help me

  basically take the time, times of beginning and end, including the days of the weeks...

• Vista Home Premium, black screen after my login and my password entry

  Hi all

  A month ago I bought a new Dell Inspiron 15 comes pre-installed with Vista Home Premium. Like many others I am now a problem with a "black screen" that hang up the machine after my login and my password. "

  When I start the machine it seems to load normally I do it at the login screen, I select my account (admin) and enter my password. The windows logo appears, and then a status bar starts indicating that the OS is laoding. Shortly after that I get a black screen on (which means that the display is on but list black). I tried to start safe mode, but I get the black screen it so.

  Like others the machine was working great until this point. I was using AVG Free edition and I am always very careful on viruses.

  Can someone help me?

  Thank you

  Travis

  Kindly stop posting the same question.

  Questions are answered as soon as possible.

  http://support.Dell.com/

  As it is only a monthe old, contact Dell Support as soon as POSSIBLE.

  It is under warranty, for all hardware and software problems.

  Report, in case of future problems.

  See you soon. Mick Murphy - Microsoft partner

• after user, login and welcome screen, the screen is black no office

  after user login and welcome screen, the screen becomes no black no office, no error no display nothing. did the same thing in safe mode except with the border around the black screen safemode. System Restore didn't help, nor fact startup repair. the only thing I get is safe mode with command prompt and the system recovery options. Inspiron 1526 less then years.

  Hi Lilrockmike,

  Thanks for posting your question on the Forums of Windows Vista.

  Have you tried opening the the Task Manager on the screen by pressing CTRL + ALT + DEL?

  If you are able to open the Task Manager, please follow the steps in the data:

  1. click on the processes tab.

  2. scroll to the bottom and check if explorer.exe is listed under the name of the image.

  3. If explorer.exe is not in the list,

  (a) click file and then click New task (run).

  (b) type explorer.exe, and then click Ok.

  (c) check whether you have the back office.

  4. If explorer.exe is listed,

  (a) click on explorer.exe, and then click end process.

  (b) click file and then click New task (run).

  (c) type explorer.exe, and then click Ok.

  (d) check whether you have the back office.

  If the problem is solved, I recommend an antivirus on the computer analysis.

  I will recommend you to a virus on the computer scan using a good antivirus.

  You can also use Microsoft Live Onecare anti-virus.

  http://OneCare.live.com/site/en-us/default.htm

  Hope the above information helps. Please post back and we do know.

  Thank you & best regards

  Ashish Gupta
  Microsoft Answers Support Engineer

• Blue screen in Vista 7 just after the login screen

  We get a blue error screen 7th on Vista 64-bit SP1 right after the login screen appears.  The blue screen immediately goes, and system restarts (or sometimes just hangs).  I was not able to find the codes of the 7th in the research:

  (took a picture of the screen...)

  STOP: 0x0000007E (oxFFFFFFFFC0000005, 0xFFFFF80002325C87, 0xFFFFFA60165BE3E8, 0xFFFFFA60165BDDC0)

  I am able to boot in safe mode.  Do you have a chkdsk C: /F and which did not help.  Do you have a repair system using the Vista startup disk and that did not help.   Went to safe mode and MSCONFIG and position the clean boot and that did not help.  I tried to update to SP2 and unable to complete safe mode.

  The ideas and the sage advice would be greatly appreciated.

  Pete

  Hello

  Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available from the OneDrive or other
  file -sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  ------------------------------------------------------------------

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  

  Bug SYSTEM_THREAD_EXCEPTION_NOT_HANDLED control has a value of 0x0000007E. This bug check indicates that a system thread threw an exception that the error handler did not.

  Important info if you received a STOP Code
  
  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED parameters

  The following settings appear on the blue screen.

  To view the settings, click on this link.
  http://msdn.Microsoft.com/en-us/library/ff559239 (v = VS. 85) .aspx

  CAUSE

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates an unaligned data reference was encountered.

  • 0 x 80000003: STATUS_BREAKPOINT indicates a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• m475dn Auto CR after LF

  This printer has setting somewhere to support auto cr after lf?  We print reports from EAR (Reynolds) software and used to use lexmark printers who have supported it.  Now, we use HP m475dn color laser printers and they do not print the forms properly.  Reynolds & Reynolds explained to find the setting of the printer if it supports.  Thank you for your help in advance.

  • Point your browser to the the printer TCP/IP address.
  • Select the print on the page Server Web part that appears.
  • Select the subtopic PCL5 .
  • Replace the parameter Append CR to LF No. Yes.
  • Click the apply button to save the changes.

• BPEL process instance does not start execution after restarting the BPEL server

  I use the server Oracle BPEL 10.1.2 under Windows with the data store of dehydration Oracle lite 10G.
  
  I have an a BPEL (proc1) process that calls another BPEL (proc2) to synchronously process. PROC1 is also called proc3 (also a BPEL process, but probably is not serious) synchronoulsy in parallel with proc2.
  
  proc2 has a wait of ~ 30 seconds into it. Call of proc1, proc2, as soon as I stop BPEL. Now, when I restart the server BPEL, proc2 instance completes execution. But I don't see the bodies of proc1 and proc3 in the BPEL console.
  
  Here are my questions:
  
  1. If proc1 called proc2 and proc3 at the same time, shouldn't see the case of the proc2 proc3 at the same time? I can only see proc2 does not even proc1.
  
  2. why proc1 resume execution after the BPEL server restarts?
  
  Pointers appreciated.

  2. why proc1 resume execution after the BPEL server restarts?

  Are there points any dehydration proc1 as receive or control point?

• Login URL details form backend

  Hi all
  
  How can I get EBS 12i login backend URL?
  
  How to check how many application that runs on the server?
  
  Concerning
  Sandeep.

  Hello

  How can I get EBS 12i login backend URL?

  There are several profile options, you can check for the backend to get the connection URL - query execution in (Note: 463249.1 - after Clone forms is trying to connect to the target Instance), it should be useful.

  How to check how many application that runs on the server?

  If you already have the application services facing up and running, use "ps - ef | grep apache-i' command, or ' netstat - a | grep-i ".»

  Kind regards
  Hussein

• After I login, strange "resizing" and the bar menu solid white

  MacBook Pro (retina, 13 inch, mid-2014)

  3 GHz Intel Core i7

  16 GB 1600 MHz DDR3

  Hi, I recently noticed this strange event with my mac. After I typed my password to connect I see my photo account reappear down and right a little and a larger size as if the screen was resized or zoomed in. Then, the display "adjusts" to the expected size, but the menu bar appears as a white line continues. After a few seconds, everything becomes normal. Everything happens all the beachball comes in and out... once almost immediately after, I hit return to log in and the second time after everything seems normal.

  Is not exactly a brick wall, as it does not prevent me from doing anything either, but it seems to be symptomatic of something causing a slower connection speed.

  Something unrelated with is that my mac seems to freeze randomly for a few seconds when I run the network connectivity. It's strange to me because of the plug of my macbook.

  I'm generally taken care to make sure that I have not bogged down my computer with the software shit etc, so I'm not sure what gives.

  Thanks for ANY help at all!

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• BootCamp "preparation-auto-repair" after the triple-boot Linux install.

  Hi everyone and thank you in advance for your help, I'm pretty desperate here...

  I use a retina MacbookPro 13 "with dual-boot OS X el-captain and Win8.1 for years, with also a small third partition"shared file ".

  Today, I needed to install a small partition (ubuntu14), so I decided to take a part of the macOS (26g) of Linux Ubuntu partition.

  Everything went well during the installation process, but now I can only access my OSX. When starting with "command-key" Linux is not appear at all and Win8.1 goes to 'prepare-auto-repair' blue screen without other information.

  I tried to install refit or without success.

  Running diskutil list:

  disk0s2 is my OS X partition

  disk0s3 is my OS X recovery partition

  disk0s4, that's where I think I installed correctly Ubuntu14

  disk0s5 is my shared files Partition (worked between osX and win8.1)

  disk0s6 is my Bootcamp Partition of Win8.1

  

  Running diskutil list of cs:

  

  TPG - vv - r see the/dev/disk0 : running

  

  Running disk/dev/disk0:

  

  Thank you in advance to those who can help me on this.

  All the best,

  Yoln.

  In addition, with regard to this topic: 'not bootable after Ubuntu Installer Bootcamp. "

  I have the exact same blue screen when you try to run Win8.1, but I never see the reclamation / screen, only right boot to OS X, if I don't press any keys.

• Z600 workstation: workstation Z600 not auto start after power loss

  I use a HP Z600 workstation.

  BIOS version

  786 G 4 V0.3.54

  OS is duel boot Windows 7 Professional 64 - bit Ubuntu & 14.04LTS

  Using Setup F10 I have:

  1. active Advanced-> Bios Power On for all days of the week and took one hour for power on

  2. under Advanced-> Device Options, I enabled wake on lan

  3. under advanced-> power on-> Options after the loss of power, I put the option "always on."

  If push the power on button on the front of the machine, it auto starts with Linux.

  If I pull the plug, the machine switches off immediately.

  If I plug the machine in, nothing DON'T get PAST!

  It lights up. I have to press the button.

  If I unplug the machine and then plug it in and wait for the moment Pwoer of BIOS on, do NOT start machine or turn on at the set time. Again, I must press the button to turn it on.

  What I'm missing or doing wrong. The machine is used as a remote server. It should restart automatically after a power loss.

  Any help would be greatly appreciated.

  Nothing changed and the problem disappeared.

  Had a power outage for 4 hours in the building.

  When the power was restored machine automatically restarted.

  So pulling plug on Z600, machine is not self-priming.

  Be able to fail the entire building: boots of router, monitor, Z600 and machines.

• HP Envy 15 black laptop after the login screen.

  The laptop was working OK up to now just get a black screen after login. I can hit Ctrl alt del, but nothing happens

  Hello

  Try the following - this implies that you are under Windows 8/8.1.

  Stop of the laptop and leave it like that for 10 seconds.

  Tap here to f11 as soon as you press the power button until you see a message "Windows is loading.

  On the next screen, select your Keyboard Layout and on the next screen, select Troubleshooting.

  Select 'Advanced Options', and then select System Restore.

  Click on yourcurrent system O and then wait as the system restore window opens.

  Pick a point to restore at least 48 hours before that this problem occurred first and then proceed with the system restore.

  Kind regards

  DP - K

• Windows auto-serrures after 10 minutes of inactivity.

  Can someone help me solve this problem? Windows Vista sends me back the connection after 10 minutes of inactivity screen, which becomes inconvenient when there is 5 to 10 times a day. First of all, it is NOT related to the screen saver, I have the "on RESUME, display login" unchecked, as well as my screen saver is disabled. It is also not related to the option to sleep in the advanced power settings, I have my computer never sleep. Vista is not sleep, hibernation, Logging Off ot, it is blocking. Basically it's just to send me back the login screen after 10 minutes of inactivity, and when I log in all my stuff is still there. Web pages or applications I had open are all still there, but it's always a pain the the _ because if I have any program configured to run automatically (as virus scans etc.) in the middle of the night programs start if the system is locked.

  I searched online for a while and could not find any help. It seems that everyone who has this problem just gets told to check their settings to screen saver and power, but this problem is not related to those.

  Hey Nick,

  This is sometimes possible when you computer from the fan or the computer gets hot. Go to BIOS and enable two fans cause by default only one fan is turned on.

  Let me know it works...

  DOM.

• SOLUTION EXPLORER. EXE must always run at the start of the TASK MANAGER after the LOGIN/WELCOME screen.

  Trying to restore the empty desktop icons by the recommendations, I have a white screen with a pointer after login and WELCOME screen.  CTRL-SHIFT-ESC gives me the TASK MANAGER. and I returned 'explorer.exe' I then the full desktop with white icons.  I need to do this every time I have start or restart the PC. I checked the regedit and the only entry to WINLOG, SHELL is "Explorer.exe" any ideas about a problem?  Thank you!

  Hi Eric1029,

  You can check if the following registry entries are correct.

  a. open the start menu, in the search bar type regedit, and then press ENTER.

  b. navigate to the following location and check the entries for "Shell" and "Userinit" on the right pane:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  "Shell" ="Explorer.exe" (REG_SZ)

  'Userinit"="C:\WINDOWS\system32\userinit.exe '.

  c. also check if you have the correct permission for this registry key (winlogon)

  d. right-click and select permission. Make sure that at least with that you have group administrators, system and installer of confidence with full control and users group read permission.

  e. check if you are able to launch explorer.exe in the window running in the Task Manager.

  Important: The above method contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.