Auto play/auto run does not not for pc games

Similar Questions

• Auto-Lock does not not from the iOS10

  Hello!

  Since I've updated my iPad Pro 12.9 to iOS10, he'll never sleep. The locking/unlocking and auto-lock settings are the same as before the update. 5 minutes and the lock/unlock switch is on.

  I tried to restart, to set another period of sleep, to toggle the switch and nothing seems to work.

  Any solution?

  Thank you!

  Hi Borjazz!

  I see that Auto-Lock does not work on your iPad.  It is important to have automatic locking works, so I'm happy to offer assistance. First of all I recommend you stop the application settings by double clicking the Home button and it slide up. Then restart the iPad and test again. If the problem persists then the how to test to see if this is a hardware problem will be to back up your iPad and restore it to factory settings, without restoring your backup.  Here are the instructions on two processes:

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Thank you for using communities of Apple Support.

  See you soon!

• I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work

  I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work. I put it in a subfolder under photos. The box is there on this subfolder. (My older guns would use) But this scanner and the 7120 times insist on ignoring my selection and use of the pictures folder. (when I save, they won't have a record dated in photos, but I would rather not clutter it.)

  Nobody likes Macs.

  When you open the settings of the utility Scan IJ, there are 3 tabs at the top. The first tab is settings when the analysis is started from the computer, the second tab is for setting when the analysis is started from the control panel. Make sure that you change the destination folder to 'Save to PC (self)' on the second tab!

• iOS 10 Auto-Lock does not.

  Hello

  I just updated my iPhone to iOS 10 6s and now the auto lock does not work, the display stays on, unless I lock it manually, and if I get a notification that locked the rest of the screen turned on, which depletes the battery quickly.

  I checked the settings under display & brightness (I put in 30 sec)

  I checked that assisted Touch is off under accessibility

  I rebooted my iPhone

  I have reset all settings

  If anyone else has encountered this problem, or have any other ideas how to solve?

  Thank you.

  Auto activate password on the lock screen

  
  

  Screen Time out and Auto a time interval of password locking is now separated in iOS 10. Unlock iPhone / iPad screen now possible using the button "home", before access code enabled on the device. We can manage, go to the settings > Touch ID & password > requires the password.

  (The shortest is safer)

• Auto-rotation does not work on my WT8-B-102

  Hello

  I have restored my Tablet WT8B-102 and my auto rotation does not work. I instaled all the drivers and the nohing.

  How can I fix it?

  Hello

  You restored your device with the recovery image?
  I mean do you use your WT with factory settings?

• Auto-Sleep does not work then in the lock screen

  As the title says, I set automatic standby after 30 minutes of idle time of the computer, but it only works when I'm on the desktop, if I'm not connected (lock screen), auto sleep does not work, how can I solve this problem?

  Hello

  A power plan is a collection of hardware and system settings (such as the display, sleep, etc.) who manages the way your PC uses power. Lock screen the console after the deadline option must be added to the advanced power settings.

  Change power management and check.

  Power plans: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows/power-plans-FAQ#1TC=Windows-8

• I get an error, "the executable file that this service is configured to run does not implement the service" when I try to synchronize the time in Windows XP.

  After trying to fix the error of time synchronization by typing net start w32time that receipt of the message in the title.  In addition, type net stop w32time responded that the service was not working.

  Original title: the executable that this service is configured to run does not implement the service

  After checking the configuration in the registry and check or update if necessary from the link below:

  Then the time errors that I got from the command prompt window:
  Order--> net stop w32time & net start w32time
  Response--> The Windows Time service is not started.

  Order--> net start w32time
  Response--> system error 1083.
  The executable program that this service is configured to run in does not implement the service.

  --> Command w32tm/Resync /rediscover
  Response--> sending command to local computer resync...
  The following error occurred: the RPC server is unavailbale. (0x800706BA)

  Hi Mitchell_G,

  Thank you for keeping us posted.

  The steps of items offered in the previous post?

  We know if you need help. We will be happy to help you.

  Thank you.

• Windows media player.cannot play theplayer file does not support the file type or might not support the codec used to compress the file

  Windows media player

  HI. When I tried to play a movie in my windows media player.it says windows media player.cannot play theplayer file does not support the file type or does not support the codec that was used to compress the file and when I click web help it lead me to windows media player error message help.you met c00d1199 error message when you use windows media player.

  Hello

  ·         What is the format of the files that you play when you get this error?

  ·         Do you get what this error during playback of all files or a particular file?

  You may encounter this error message for the following reasons:

  1. the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  2 - the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  You can try the steps and check if it makes a difference.

  a. to determine what codec was used with a specific file, play the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On the file tab, look at the sections of video codec and Audio codec.

  b. download and install Codecs by clicking on the PLAYER tab and check. To connect to the Internet and automatically download the Codecs of the reader.

• How to read files torent on windows media player, I downloaded torrent files and wmp says unable to play because he does not support the format and how it has been compressed

  How do I play torrent files and .torrent file to play on wmp extensions, I doown loaded torrent sons and dossier they won't play I get undeclared can not play because it does not support the file or extension or does not know how he formatted or compressed

  Hi tuellahjones,

  I suggest you to update the codecs and check if it helps to solve the problem.

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

• In the program Panel, when I click the SPACEBAR (that is, 'Play'), the image does not advance.

  In the program Panel, when I click the SPACEBAR (that is, 'Play'), the image does not advance. When I click on 'Play' again once (that is, 'Stop'), the fixed image confirms that we went. Please, what should I do so that when I click the SPACEBAR (that is, 'Play'), the image does indeed move forward? Thank you!

  You send messages in the forum Business Catalyst, you should put this in the forums Adobe Premiere http://forums.adobe.com/community/premiere

• My DVD drive does not recognize DVD game discs.

  My NEC ND-4550-reader DVD - RW does not recognize DVD game discs.
  He has no problem reading movie DVDs and music CDs or access data CD and DVD burnt with data on them.
  I removed and let XP Reinstall the device and high-low filters removed the registry etc nothing works.
  I made a copy of a DVD game on another PC and it is recognized and install my PC.
  All DVD discs work very well on the other PC.
  I am running Windows XP Professional with SP2.
  MS Fixit controls indicate no problems.
  This would be a matter of software protection?
  All tried game DVDs are official records and not copies.
  The NEC ND-4550 uses cdrom.sys as pilot.

  Finally, I replaced the drive for a new one (Pioneer DVR-S18L) and everything now works as it should.
  So I suspect that it's a hardware problem and not one that can be resolved by any of the Windows settings.

• TextArea auto resizing does not work from flex 4.6

  Hello

  before flex 4.6 on air mobile for android, if the height is not specified in a s:TextArea, auto sizing textArea, since flex 4.6 does not work.

  Thank you.

  Try switching it back on the TextAreaSkin instead of the StageTextAreaSkin.   StageText allows you to get a native text input, but there are limits to the way he plays with the rest of the display list.

• HP 6968: Auto Off does not engage

  Hello

  I work on behalf of Epson from a local electronics dealer Superstore but bit the bullet and bought this printer because of its multitude of features and significant improvements on HP 2015 models available in my store (as well as the sale price) competitive $59.99, down from $179.99. Overall, I am satisfied with my purchase, but have noticed that the auto-off function does not work. It is currently set to turn off after 1 hour, but does not. In contrast, regular power off has been tested and works as expected. Mode 'sleep' is currently on a minimum of 15 minutes, well I don't think that this is in no way related to the auto off (which has a limit of 8 hours, unless I'm mistaken). I tried already to switch different things in the power management menu, as to disable the cursor for turning the voltage switch programmed, but nothing works. It does not completely turn off (i.e. the power button stays on and the unit is essentially asleep, not off).

  Any opinions?

  I captured the following JO 6960 Pro series (page 3) user guide available to support HP (http://h10032.www1.hp.com/ctg/Manual/c05135226) page:

  Auto-off is turned on when the printer is turned on, if the printer has no network, fax or capacity Wi - Fi Direct, or does not use these capabilities.

  Auto power off is disabled when a printer wireless or Wi - Fi Direct ability is activated or when a printer with fax, USB, or Ethernet network capability establishes a fax, USB or Ethernet network connection.

  Please check if this feature is disabled in your case because of connections to the computer or mobile devices (with or without wire).

  You can also try send a job to the device to check if the camera is capable of wake up automatically upon receipt of the work (when the unit has not been used for more than 8 hours).

  I hope this helps!

• Auto focus does not work in the creative modes

  I use EOS 600 d for the past three years. I was and I am not able to auto focus in creative modes. I actually thought that there is no installation of the auto focus in creative modes. Only when I attended a workshop in Chennai yesterday, I got to know the automatic update facility is available in creative modes too.  I tried with three lenses and in all cases autofocus does not work in the creative modes only. In basic mode, it works well. I browsed the forum and found to RESET. How a reset should be done? Someone please explain. I can't find any updated firmware for 600 d.

  Thank you, Mr.Waddizzle. I did a reset according to your advice and now AF works in the creative modes also. Thank you.

• Auto Detect does not work; can I switch to MSC?

  After trying all the fixes, I concluded that my auto detection mode just doesn't work and the drivers, or whether it cannot be repaired. my computer (XP S3) simply does not see the sansa clip +.

  But in MSC mode, it see it.  Unfortunately all the audio books that are responsible for now are not visible during exploration mode MSC; Opens the Sansa clip folder, it displays all the empty folders even if there are 4 books out there.

  My questions: 1) is there a downside to using the MSC mode?

  (2) is it possible to get mode MSC to recognize books here now, or do I have to reformat and start over?

  Oh and the other mode is not recognized or the other.

  Thank you, I'd just throw this thing. !

  Phil of the lost

  If I understand correctly, the MTP mode is broken on your PC and the device is in MSC mode.

  No worries, you can use MSC, but you lose the basic functions of the PSG.  According to your audio source, PSG is required for the feature DRM (license).

  I believe that sound can be used by MSC as their DRM is a little different.

  To fix the MTP system (if the device communicates in MSC, you're almost there, like data makes to the device), manually select MTP mode to maintain the function of automatic detection to go back to the other mode and plug.

  If you open Device Manager, find the Clip mentioned under Portable device.  Device Manager can be found starting with the control panel.  Double click on the Sansa, or right click and select Properties > driver > Uninstall.  I like the right click directly to Uninstallshortcut.  easy huh?  Then, unplug the unit, wait a minute (30 seconds should be enough), then plug back in and it will reinstall automatically.)

  Don't forget, the MTP drivers are part of Windows Media Player 10 and later versions.  Windows XP came "out of the box" with 9 WiMP, which can be upgraded by simply installing WiMP10.  The application Microsoft MTP Kit from Portage is available on the Microsoft Web site also, often enough to install the Kit fix a frazzled WiMP 9 and install later.

  Why PSG disappears?  Often, the registry entry for the Sansa is key, as the ability of the PSG is simply "off." The registry is fragile, often changed that you plug into various things about these USB ports, or install different applications.  Windows uses the registry as a pure practical cheat to decide how to manage devices that only can be found on the USB bus.  If the entry is corrupt, we suddenly lose features such as PSG.  Try reinstall thing, it is the simplest solution and generally solves the problem.

  Bob