Auto power off the radio when WAN breaks down

I have a stand-alone CISCO IOS 12.4 T6 877 wireless router (9)

I want the radio to stop, if there is no output-(habituellement l'ADSL mais concievably Ethernet) port but I can't find the commands.

I had a problem for a long time with an another non - CISCO AP that was to involve local customers because they saw it as a strong signal, but then could not route packets because Ethernet is declining. Other nearby access points could have taken them if his radio had been extinguished.

I can't believe it's not a way to do this, but I look in vain for orders. It works a bit like a backup, but instead of bring a port up when another operation fails, he must stop the radio when the monitored port goes down.

Sorry if this is a stupid question, but I searched on through docs and assignments: maybe I'm the wrong keywords

You must write a script of the EEM

http://www.Cisco.com/en/us/prod/collateral/iosswrel/ps6537/ps6555/ps6815/config_guide_eem_configuration_for_cisco_integrated_services_router_platforms.html

If you need more information, let me know

Tags: Cisco Wireless

Similar Questions

  • AppleScript to disable auto power off

    Hey guys,.

    I was wondering if there was a way to disable the automatic stop for a mac using Applescript.

    Thank you.

    Mac OS: El Capitan

    MacBook Air early 2015

    What did you use to enable auto power off?

    Do you mean the stop programmed in system energy-saving Preferences?

  • HP Color LaserJet M277dw MFP: Disable auto power off after inactivity for HP Color LaserJet M277dw MFP

    What is the purpose of mobile printing solutions if you cannot activate your home printer?
    My printer stop automatically after 8 hours of inactivity and therefore makes it impossible for me to use mobile printing. The printer is connected via WLAN (without active ports to stop the closing).
    In the configuration, there are only options to stop after 2, 4 or 8 hours. No option on disabling of automatic shutdown.
    Pls do that for the people who work on the firmware updates, they must include an option to disable auto power off, many people are already complaining that and nothing has changed so far.
    Its just illogical. You make big announcements for HP eprint and other stuff, but your printers are not able to do so even if you could theoretically make eprint if your standing next to your printer all day.
    I just got this printer pluged and installed and already tired of this BS!
    I know that there is no solution, so just send it to the people who can change it.

    for all of you who read this post, I was in contact with the technical team of HP and they said that they don't give you the ability to disable auto power off on purpose, it is HPs energy-economy-policy to do and there are no plans to change this in the future
    in my case, I only WLAN's, yet is not automatically stop (although it should be), I guess I'm lucky that my router it ping every now and then and is therefore not stop
    If you can't fix it yourself with active ports and may not have at all, it will probably not option left than the back of the printer

  • Is it possible to stop auto power off while downloading?

    Is it possible to stop auto power off while downloading?

    Can you please be more specific with your problem?
    What model of laptop do you have?

    What happens exactly and when?

  • Canon IJ printer utility - disable auto power off

    The manual on my new printer MG2420 says I can "Disable Auto Power Off" of the power settings in the 'IJ Printer Utility'.  However, I have not an IJ Printer Utility in my Canon Utilities downloaded via a Mac driver.  Where is it, or if not, how can disable power off?  I want all the time.  Otherwise, the printer works perfectly.

    OK, no answers so I'll answer I am since I finally figured it.  On a Mac, go to "System Preferences" and click on "Printers & Scanners".  Then click on "Options and supplies."  Then click on "utility".  Then change the "cleansing" in "power settings".

    Then click on 'Auto Power'.  Then click on "Auto Power On" and "turn off".  Finally click 'done '.

    Of course, the Canon online manual is silent on this.

  • Linksys SGE2010P resets after power off the power

    Hello

    I have a linksys SGE2010P and when I configure and save works well, but after a power off the settings are default return. someone an idea?

    Rensk,

    I used to have the same problem in my SFE2000 until I learned that you do the following steps to permanently save your settings

    go to Admin > file management > copy files

    Click the copy settings button

    set the name of the Source as Config file running

    Set the name of Destination as Config Startup file

    Click on apply

  • Turn off the music when I plug into the speaker / earphone cord

    Turn off the music when I plug speake / headphones cord. Have to unplug to get the music to play again.

    Have you ever force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data, but it can cure a few glitches.

    Usually the music stops if you unplug the headphones to the device, and you have to press 'play' again to keep listening via the external speaker.

    If you use the external speaker and plug in the headphones, the song doesn't stop and continues to play through headphones. Just tried it with my camera.

  • HP Officejet 4630: HP 4630 gets printer fault. Must cancel doc, power off the printer, then restart. There is WI - FI connected

    HP 4630 gets printer fault. Must cancel doc, power off the printer, then restart. There is WI - FI connected.

    It then prints until I have change entry. Then it occurs and stop and restart is necessary.

    FAX and SCAN properly.

    Hello

    Thank you for using the HP Forums. You can try the following:

    Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

    http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

    Hope that helps.

  • Cannot convert a virtual machine while it is powere on or suspended. Shut down and power off the virtual machine before the conversion.

    Hi all

    I am currently using preinstalled VMware 7.1 and I try to import a virtual machine, I used to work on my windows XP. Recently, I am using windows VISTA and I am trying to import my VM (.vmx) and I get this error "cannot convert a virtual machine, although it is powere on or suspended. "Shut down and power off the virtual machine before the conversion.

    This virtual machine worked very well under windows XP and VMware 6.5, but now I am not able to import it. Please suggest how I can make this virtual machine running in my VISTA and vmware 7.1.

    I am also attaching the converter file logs and .vmx vmware.

    Thank you...

    Is there a problem with this backup?

    It is possible. How big is she?

    Right-click on the vmdk file in Solution Explorer, then select «Map virtual disk...» "Does it work?

    André

  • HELP PLEASE! I can't power off the virtual machine on host VWware ESXi

    I can not power off the virtual machine on host VWware ESXi is any other command. How can I restart?

    I need to power on the virtual machine, I did not back up!

    Thank you very much

    Hello

    in the ESXi console, run esxtop... you see the functioning of the virtual machine?

    If this isn't the case, you can restart management agents in the ESXi and you will be able to turn on the virtual machine again.

  • How to make a scroll animation constantly fixed after scrolling? I want the animation at the beginning when I scroll down, but I don't want the animated thing to disappear when I scroll to the top again.

    How to make a scroll animation constantly fixed after scrolling? I want the animation at the beginning when I scroll down, but I don't want the animated thing to disappear when I scroll to the top again.

    I know how to start the animation by scrolling down, but I just want that he stay there after him. Could you help me please, guys?

    Hi Tom,

    There is no native function to Muse to achieve this goal.

    Kind regards

    Aish

  • New laptop password AC power to the battery when you play a game.

    I got an IdeaPad P580 (i7, HDD 750 GB, 8 GB of ram, nvidia gt 630 m) a few weeks ago. A week ago I started having this problem where whenever I play a game, he's going off the AC power and the battery or vacillates between the two.

    He did this in Grand Theft Auto IV, Fallout: New Vegas and same Minecraft. Sometimes even outside of the games, but this is rare. After closing a game once, he would be off AC for a few seconds every time I opened a new tab in my browser!

    It doesn't matter what mode of energy that I use. The latest graphics drivers are installed. No matter if I use the Nvidia card or disable it in the bios and use the integrated Intel graphics card. I have tried everything I can think; I plugged the AC adapter into a wall directly instead of a surge protector, etc..

    When the laptop is, there are three lights on the front under the touchpad. The two left are usually, but sometimes when it produces in the Middle it turns red.

    If I remove the battery and just use the AC, the laptop just shut off after a second or two in the real game.

    Someone at - it ideas? Nothing at all, even if you think it's a long shot. It of frustrating to buy a new laptop and then happen, especially since the problem with my old laptop has been playing games would cut (which was overheated, which appears not to be as it is not hot).

    Hmm. you have no overclock your right to gt630?

    cutting like that usually means not enough power is supplied by the power brick, or the connection is loose.

    How many watts is the power brick?

    If the power is firmly connected, first thing to do is call lenovo and ask them to send you a new power brick.

    If the problem persists, you may have a bad mother power connector. It could be opening itself, or the connector on the motherboard.

    How many times you plug and unplug the power cord? and you do it with force? If you are not sweet, the brackets that hold the power port may crack.

  • Re: Satellite Pro L670 - can I turn off the sound when the battery is empty?

    Hello

    Is it possible to disable the bios beep when the battery is empty or the laptop's Hibernate?

    I have a Toshiba Satellite Pro L670.

    Even when the sound in Windows is turned off the laptop do a annoying sound.

    Thank you!

    Maybe it sounds silly, but I put t understand why that should be disabled. When the battery reaches the critical battery level you will be informed about this and portable must be connected to the power running or you have to save your work and turn it off.

    Do you really want to work until the battery is completely discharged?

    Anyway, AFAIK this notification level BIOS cannot be disabled.
    Let's see if someone else is better informed than me.

  • How to turn off the system when finished

    How to turn windows when you are finished using it.

    John Hemphill

    You should always stop and not just pull the seizure of power.

    Open the first Save all work and then close all programs that you had. In Windows Vista and Windows 7, it should just be a case of clicking on the button Start (bottom left of the desktop) then the off button. Windows will then take several seconds to complete the shutdown process - you will know when its finished because the fans will stop and the monitor turns off. Then, it will be safe to swich power off if that's what you want to do.

  • I can't turn off the display when I use screem saver

    I keep my laptop always on, recently the screem saver don't work when I choose when turn off the display. All this time, the show view screem saver, but never active the option off.

    Hello

    ·        Is there wireless devices connected to the computer when you leave it on?

    Wireless devices may also not allow the computer to turn off the screen if there is no interference.

    In addition, it is not advisable to keep the laptop. He could be an update or a facility that has occurred and which requires a stop. Would cause the problem; try to restart the computer and check if the problem persists.

    If the problem persists, check that the power plans settings. For more information follow the link below.

    http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

    Also, try to change the theme of the computer and check if that helps. to change the theme follow the link below.

    http://Windows.Microsoft.com/en-us/Windows7/change-the-theme-to-improve-performance

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • fixing blocks V8 forums SMF downloads

    Since the v8 update, attachments in the SMF forums that I run are not properly recognized and (although the file type can be recognized of pine, for example, a JPEG file) is offered to the economy such as index.php. An attachment of MP3 or midi will

  • 2540 HP all-in-one: how to check the level of ink with windows 10

    Well well, after 7 years using windows XP pro and my various printers HP over the years, I've always been able to instantly use my HP printer on the screen to see the ink level... I would go to programs... Find (printer todays) 2540 HP... Then click

  • Satellite Pro P300-18 - canoe install WIn XP for lack of HARD drive

    I just got a Satellite Pro P300 18 with VISTA pre installed.I need to install XP Pro on it, but when I start installing XP Pro from the CD, it says it cannot find any hard drives. Is that any body can help me?Some of my software works or not or could

  • Number of VS-oriented oriented - report .tdr

    Hi all Me and my colleagues have a problem in reporting .tdr tiara. Our script does the sequence of operations: File loading 1) 2 channel operations) (3) file save (TDM) Report 4) save (TDR) The problem is: after the calculations, if I load the TDM a

  • Intel ICH9 family USB Universal Host Controller updates for HP G60?

    I have a HP G60 laptop and recently there has been updates. It seems that when I restart it, it tries to make updates for numbers of Intel ICH9 Family USB Universal Host Controller updated 2937, 2938, 2935, 2936, 2939, 293 a, 293C and 2934. He tries