Linksys SGE2010P resets after power off the power

Similar Questions

• Cisco router WIFI does not work after turning off the power

  I have a CISCO router that worked very well until someone turned off the power for a few minutes.  I tried to unplug the modem, the router and the laptop and waited a bit.  Then I turned on the modem, then the router, then my laptop but it is still not in communication with the modem.  I can use the modem with a hard connection to the laptop but need the WiFi as well as others can use it.  Help, please.

  You need to contact support with your Cisco router.  It looks like it might have been reset and the installation needs again.

• 17 e040us seeing supply and turned on WIFI light after switching off the power

  17 - e040us after HPO updates and Windows Update now when I turned off the computer, power and wifi lights stay on... have to hold the power button in get them to turn off before I turn on the back

  tried the power settings and looked in the BIOS, there is nothing that I see... any ideas?

  Solved returned to the F8 BIOS and the problem disappeared... .has been F14, the origin of the problem

• Airport Extreme (ME918LL/A) must be Factory Reset after power cycling

  whenever I power cycle the router (at the suggestion of Cox), I end up having to reset completely by holding the small button in the back (for factory reset).

  after power failure cycling or power (it is on a surge protector) he will be a solid clear amber and not actually broadcast all networks.  several fun power do not help, the only thing that works is a clean factory reset.  THEN trying to set up the network using an iphone 6 s (macbook air and mac mini/PC portable airport utility never works) it will take two or three tries, even if I am standing less than 5 feet from the base station, in clear visibility.

  its really begins to age, Wastin' 30 minutes each time that the router is the bike power

  AirPort Extreme is defective and must be replaced. Please contact the Apple Support for a replacement unit.

  Click on the link contact us at the bottom right of this page to get the process underway.

• Drive external DRIVE not detected (2 PCs), after turning off the PC during the error checking

  I ran properties/tools/error-check on a (regularly used to back up this PC XP) external HARD drive. After 2 days, error checking was still running and not even 1/3 way 4th Phase but I need PC. It was not possible to stop "Error Check" from the dialog box then I tried Task Manager/Applications, which said that nothing worked, so I turned off the PC.

  When I restarted the PC, external HARD disk was not in my computer. Control Panel of configuration/addition does not see it no more. However, when I plug / unplug the station. HDD USB cable, the computer makes a noise and is also recognized in "Device safely Shut Down" as a USB storage device mass (but no drive letter). I tried to start/run/Cmd/Diskpart/List Disk and it is not listed.

  NB. I checked the post. HARD drive on a Linux PC, which also does not detect not, then it is certainly the post. Drive HARD, not the XP PC.

  Can offer you any advice?

  Hello

  · What is the number and the model of the hard drive?

  As you mentioned that the issue isn't with the operating system but with the drive hard, for better support I suggest you to contact the manufacturer of the hard drive.

  You can also get in touch with any local technician who can help you with the same.

• Processor/fan continues to run even after turning off the laptop

  I'm using Inspiron 15 3542

  I've updated my OS to Windows 10, but sometimes will not stop the fan from the processor/even after discontinuation of the laptop (as well as the display goes off)! The fan continues and continues. And after this laptop won't turn on even! I have to open the battery, and then it lights up!

  I downloaded almost all the software required for my laptop dell for Windows 10 x 64 software download through bit.

  PS: I searched the forum google/checked, and the solution I found was to download Intel Management Engine. I did download and install it, but the problem seems to stay...

  Kindly help and thanks in advance!

  Sorry for the double post!

  Found a solution: https://www.dell.com/support/home/in/en/indhs1/Drivers/DriversDetails?driverId=NFY3D&fileId=3497768106&osCode=WT64A&productCode=inspiron-15-3542-laptop&languageCode=EN&categoryId=FW

  I have installed, be informed after several tests

• Not able to reduce the size of the police after turning off the projector.

  I use my laptop for powerpoint presentation for the students of the University. I use a Lenovo Thinkpad SL500. However, there is no problem to connect to the projector. The last time that I disconnected the projector, the size of the font is not some up to normal. I tried to go to the option of customization and selected the smaller font. Even after a reboot, the font size is not down to normal. The next time I plugged the projector, the size of the font was normal. After disconnecting, the font size is increased further. Help, please.

  Hi MamoonSyed,

  1 - is the maximum resolution (800 × 600 pixels), your computer can get?
  2. what happens when you set a higher resolution?

  You can try to set the resolution higher than 1024 × 768 or higher and check.

• Logging.XML file resets after you restart the managed server

  Hi all
  
  I modified the logging.xml file because I implemented a Logger.But ADF custom after you restart the server, SOA, logging.xml file get automatically back to the unmodified state, all this means that I modified was not.
  
  Am I missing something?
  
  Please suggest!
  Kind regards
  Shah

  Hi Shah
  In the EPS group, usually there is a set of Configuration files are synchronized to all of AdminServer breaks the run. A simple example is like file config.xml and some files of data sources, files, ldap, etc. Whenever we reboot the Soa or bam managed servers, they go to AdminServer and obtain a copy of these files. So, if you make any changes directly on the managed server computers, then can be is getting crushed when you restart the servers. Check the timestamp of all these files. Make the changes on the side means Admin on the machine where you have AdminServer running. If all goes well, soa/bam should get these files at startup.

  Thank you
  Ravi Jegga

• iMac, reloading osx after turning off the power

  No fix for iMac does load not... have tried rebooting and cleaned the discs... everything ok but need to reload OS x to start iMac every time...

  Can you be more explicit about what you did? So please explain exactly what is happening when you start.

• Factory reset after power cut

  I use Cisco sg300-28 switch. When I turn it off and turn it on, he returned to factory reset include login password, it dose normal operation or I miss anything?

  Thank you.

  Sent by Cisco Support technique iPad App

  Hello Jerry, SX300 series switches have a startup configuration and running configuration. For switch settings, you must save the configuration running at startup otherwise, all settings will be lost.

  After a change is made there is a flashing recording icon at the top right. You can click here and follow the windows. In addition, you can go to Admin-> Managemenet file-> copy the file and record there too.

• With Windows Vista, HP printer repeatedly re - moved after turning off the PC, then return and losing sessions.

  I have Windows Vista, Dell Vostro A860, HP PSC 1410 all-in-one printer.  The HP CD work well with Vista.  The printer repeatedly re - installs itself, making it necessary to go into the settings to choose my preferences each time. I did download a fix from HP that has first requires that you uninstall the original software, and then download and apply the fix.  However, the patch will not install unless you have a software for its difficulty.  It is a cycle race.   Any ideas?

  Jeanette

  Hello

  1. don't you make changes on the computer before the show?
  2 did you receive an error message?

  Method 1:
  You can unplug the printer and reconnect the printer and check the issue. You can also uninstall completely printing software and then try to restart the computer and check.
  See the link for help.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Method 2:
  After restarting the computer, you can download and install the drivers and check.
  You can check the link to download the drivers.
  Software downloads & pilot - printers all in one HP PSC 1410v
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=458978
  Also check out the link:
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Method 3:
  After the installation of the printer, you can try to print a test page and check.
  Print a test page
  http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-test-page

• Cannot access internet after turning off the computer during the update

  original title: computer problems

  After windows has been a configuration that we couldn't not get out of the loop from 0% for my daughter close, now it used to connect to the internet, and when we try to watch whatever it is to diagnose why it freezes just straight up

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Bluetooth icon tray disappears after turning off the USB bluetooth adapter in the system tray

  You seem to have a problem with your bluetooth icon. If you cannot match something you can try to remove the device and then put it back. I tried it didn't work. Then, you may need to disable bluetooth adapter on the icon. But if you do that you cannot turn it back on because the bluetooth icon status bar disappears when the adapter is disabled. Also it does not appear in "peripheral" that the adapter is turned off. You must go to the C:\Program WIDCOMM software and double-click BTTray.exe to redisplay the icon, and then turn on the adapter. Come on Microsoft, surely it would be easier to just gray exit icon at its stop, then your right click the greyed to activate the adapter turn it back on. Simple really.

  Follow this link: http://social.technet.microsoft.com/forums/en-US/itprovistanetworking/thread/b09708cd-6c63-4073-b27f-f853aa5a5dc0/

• Satellite A100-062: FN keys do not work after turning off the Flash map software

  Hello

  I just got an A100-062 with Vista. I don't have as so disabled flash card software he. However then the function keys don't seem to work. How can I maintain the functionality of the FN keys, but do not have this software running?

  Thank you

  G.

  Hello

  What dose of the FN key features does not work?
  You are not able to use the FN keys or a particular FN + function?

• EOS 7 d Mark he's my cameras battery continues to drain, after turning off the camera.

  Looking for help and or suggestions...

  I'll check the link. Thank you