DSC-RX10. Level audio Rec in the manual online

Similar Questions

• Need the manual online for Satellite Pro U200

  I heard people talking about the online manual for the Toshiba Satellite Pro U200, especially when it comes to upgrading the memory. But I never saw a link to the manual online. Someone can it give?

  Neffe :)

  Hello

  Visit http://eu.computers.toshiba-europe.com > download & support > Support home page.
  Under download, you will find Toshiba manual. Click on it and choose your model of laptop.

  I check the manual and it is ready for download. ;)
  If you need more help please write again.

• Where can I find the manual online Qosmio F20?

  I like to watch movies via my qosmio but using my tv for screening. I tried fn and F5 but nothing appeared on my TV, computer laptop screen went black however.

  Hello

  You must also change the right channel of the TV. If you have connected the laptop with s-video output port, then turn on the TV.

  If you want to download the manual for Qosmio, so please check this:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_manuals.jsp

• Quality and size of the Image of DSC RX10

  Follows some practical issues, I found no answers on in the product manual, in addition, as in WEB based help to http://www.sony-asia.com/microsite/cybershot_userguides/DSC-RX10/eng/index.html Guide

  What is a practical difference between JPEG images created, except the size (about 7 MB, 11 MB, 15 MB), when Ratio of Aspect 3:2 & L:20 M is defined (by default), for Image quality parameters following: 'Standard', 'Fine' & "Extra Fine"?

  How much image quality will be downgraded, if the quality of the Image 'Standard' will be used instead of a value of "Thin" by default? As long as I understand, "Extra Fine" logical value only when a very large images will be printed, no?

  What quality of the image is going to be downgraded, if 10 M or 5 M must be used instead of 20 M, as well as the value of the Image quality?

  Add a new more question today.

  What is a main difference between the "Intelligent Auto" and "Superior Auto" modes? Be smart mode (the default), I can change to higher mode by means, for example, the fn

  key, during the shooting.

  Thank you in advance.

  Kind regards

  Valery

  Hi Valery, there.

  You do not need to create a new topic, it will be easier for you to review everything in this thread. I will try to give you the answer to your last questions better than I can.

  [Soft skin effect] recognizes skin tones and reduces the appearance of wrinkles and stains without affecting the rest of the shooting. Add levels low, medium, or strong [soft skin effect] depending on how it is defined (see the example below).

  

  As mentioned on my previous post, you can only turn the top display panel on or off. The information displayed on the Panel depends on what your camera settings are light or used. The description of each information on DSC-RX10 Help Guidecan be found.

  [The AEL w / shutter] is a function that can be used when you want to crop the scene, but keep the current risks of change. It allows the camera keep the same brightness between takes. Is set to [Auto], exposure will be set after the update is automatically adjusted when [Focus] is set to [Single-shot AF] and set it on [you] If you plan to use other [Mode Focus] just as it is described in this Guide. [Off] setting is very explicit.

  [SNA] or scene selection is another type of automatic mode where the camera settings are twisted with a configuration preset for common scenarios shooting or scenes and mode [Auto smart] will automatically do everything necessary to provide optimal results. It's maybe not as good as shooting manually, after all the camera is still a machine that does not know how you would like a picture to show. It would be up to you which mode will give you the best result of the image of your making.

  If my post answered your question, please mark it as "accept as a Solution.

• Melted how audio and keep the audio level in clips later

  I have piloted PE 10.  When I add keyframes manually to fade audio output, or simply select the option ' fade out ' to fade at the end of an audio clip, the audio ends at the end of the clip and the audio of the following clips is to initial level.  This creates a large discontinuity to the noise level.

  What happens if I want to the next clip or clips to continue in the same faded audio level, rather than start at their original level.

  In Pinnacle Studio, for example, when you fade down audio, all audio to the right will be adjusted to match the level after the fade, as long as there are no keyframes forward of this final key-frame fade.  Now that I'm getting 10 EP, I'm bored of this behavior.

  In PE10, there is a sequence of keys which allow this behavior?

  If you have only one or a few Clips, where you want to reduce the Volume, I do so at the level of the Clip and simply adjust the fixed effect (appears automatically on all the audio Clips), and add keyframes to adjust the Volume.

  I find it easier since the effect controls panel, accessible by selecting the Clip you want to adjust, and then in the effects tab, choose Edit effects.

  Lets say you have a Clip, where the majority of the Volume is just, but there is a section where you want to turn it down. Go to where you want the Volume to start to get lower, add a keyframe (toggle ON keyframes), then go to where you want the Volume restore the main value and add another keyframe. At this point, nothing has changed, but you added two key frames, which "held" the Volume at the current level. Now, go where you want the Volume to its lowest, to the right of the first keyframe that we added. Add another. Adjust the level to this keyframe (now the second in the Clip) to what you want. Go where you want the Volume first on the rise, just before the second keyframe that you added (now third), and add another keyframe. Adjust so that it matches the Volume you settled in what is now the second keyframe. You will have four key frames: the first, one that keeps the Volume at the beginning of the Clip, the second, which allows to adjust the Volume to its setting, the third, which corresponds to the Volume of the second, then the fourth, keeping the Volume at the level of the initial until the end of the Clip. It will look like this:

  

  Some like to do the with the "rubberbands" Keyframing in the Clip itself, but I like the effect controls panel.

  In addition, keyframes that we added, are linear and if you want to adjust the Interpolation, the smoother changes just Rt-click on each keyframe, to adjust the Interpolation. Interpolation is a little abstract, so I suggest to read the help files on Bezier curves on keyframes.

  Good luck

  Hunt

• Quickly and easily adjust levels dB precisely when the heights of low audio clip using?

  Unless I use a height high enough audio clip, it is extremely tedious to achieve a specific level of dB.

  Is it possible to almost instantly making it easy to slip accurately when the height of the clamp is gray low?

  I know that I can in. the volume up and down by using ctrl - and ctrl = but when I do that I see not reassuring display of the confirmation of the dB level.

  Is it possible to this thumb upward or down while seeing the dB display?

  Ian, if you open the Audio pane of the Inspector and use these keyboard shortcuts to adjust, you see move the volume slider and DB digitally edit to the right of the cursor.

  Russ

  Edit: Insert the volume

• Details of the DSC-RX10 modules

  Following questions about 3 possible SONY modules for this device.

  1. sun visor

  My getting lost. I was not found in the list of spare parts (modules) SONY DSC-RX10 on SONY's site. What are the types of different lens hoods for this lens and where I can find (buy)?

  2. Sony PCKLM15 LCD for DSC-RX1 (black) screen protector

  It really is the DSC-RX10 room?

  3. shoulder strap in-the-box

  I would like to replace it with a more user-friendly, for example, the STP-SB1AM shoulder strap. Because there is

  not any size for this product on your site, I don't understand, if it's the same size as an of-the-box. What is the length of STP-SB1AM ? Fit DSC-RX10?

  Thank you very much in advance

  Valery

  Hello here.

  Thank you very much for your inquiry

  Lentgth of a bracelet of the original box is about 130 cm (1300 mm)

  STP-SB1AM/B is much shorter.

  "Will consider" models stp - xs3, stp - xs2 (length 900 mm) & stp - xh1 (850 mm) Sony Asia site, you sent me

  No, there are now alternative 1-to-1 in the meantime

  Valery

• Ideas and requests for updated Firmware Sony DSC-RX10

  I stay with her to see what fits with the first update of the firmware so I really video features of the large sensor RX10... I focus mainly on the video related updates in this post:

  Menus require a page of favorites to store frequently used functions as connection or wifi card format... Maybe the fn could be broadened to include these selections?

  In Aperture priority mode, it would be useful to define a minimum-Max shutter speed range. In this mode, only the camera often falls to 1/30 that blurs any sort of same subject in slow motion. So, it would be good to have a little more control in this setting without switching to the full manual. It goes same for shutter priority: I would like to specify a range of opening similar to the Auto ISO function

  Add video update options. Outside of a fixed object or interview situation, holding the focus is scary compared to video cameras small sensor and it is very similar to the focus on any DSLR I used for the video. In the auto focus mode S and C background often focus instead of the object in the foreground, if there is a lot of movement, and then the update has had a lot of delay, find the subject in the foreground even when centered in the frame... So, I had to stick to a manual focus for the videos so far. I like the tracking feature, but it is difficult to engage in video mode...

  Development let grow while shooting video. I can't understand how to enlarge a section of the image in manual focus mode when shooting video (you can when shooting still images). I thought this would be a feature of work in video mode, as well...

  Hello jefbak,.

  We appreciate the comments that you have provided about the characteristics of our DSC-RX10. This feedback helps us understand how we can improve our products. You can share these ideas to our page to join the Inspiration which is frequently visited by our experts and engineers.

• CarPlay audio quality of the voice when it is connected through the USB port is poor vs Bluetooth on Pioneer AVH-4200NEX

  Hello!

  I recently installed a Pioneer AVH-4200NEX unit, I was super excited to improve my car with the support of CarPlay, and everything works great except for one thing.  When I connect my iPhone (6s +) to the unit via a USB cable and a standard phone call, the audio quality is very bad - hail, very downsampled, and metallic sounding compared to the use of Bluetooth via the unit to pioneer for the same phone call (I'm on LTE, using HD voice, although the quality difference is quite noticeable on the calls not HD and on the 4 G calls).  I looked for an answer to this question, but the best that I can find mention of limited USB bandwidth and try to juggle than the bandwidth for the rest of the CarPlay experience, although I don't buy not because audio via the iPhone connected with USB playback is just as clear that it is through Bluetooth.  So my question is: How can I submit a bug report Apple about this behavior and (b) do you have other CarPlay users also be known this recent problem on a unit of Pioneer NEX (AppRadio included)?  It would be great if this is a bug of Pioneer for which they can release a firmware update, I'm just worried that it is a codec problem specified by the CarPlay, so non repairable.

  Thank you!

  -Seth

  Hello served,

  Thank you for using communities of Apple Support.

  I understand that when you use the USB cable for your iPhone in your car with the audio CarPlay is mediocre. I know how it is important for you to hear your calls clearly. In a situation like this, I recommend the steps described in the following article to help solve the problem.

  Configure CarPlay to use with your iPhone

  Specifically the section to get help:

  Get help

  If CarPlay does not work as you expect, here's what you can check. After each step, try to use CarPlay again.

  1. Make sure that Siri is turned on.
  2. Restart your iPhone and your car. Depending on your car, you can see the CarPlay home screen when you turn it on. If you do not, look for the CarPlay logo on the screen of your car.
  3. If possible, connect your iPhone to a different USB port in your car.
  4. Try a different lightning to a USB cable. Make sure that the cable is certified.
  5. Update to the latest version of iOS.
  6. Check the manual using your car. You may need to install updates of firmware for your stereo.

  See you soon

• How to change the audio output for the metronome

  Hello

  I would like to send the metronome (and speech signals) for monitors to the scene in the ear.

  I understand that I can do this in MainStage using different output for the above titles vs. the rest of the 'Concert '.

  I tried to follow the instructions of the Manual:

  Change the audio output for the sound of the metronome

  1. Choose the MainStage > Preferences > General.
  2. In the section of metronome on the general tab, choose another audio output on the shortcut menu to exit.

  PROBLEM

  1. on the general tab, only the outputs 1-2 are available/selectable (likely, these are also by default for all "Concert")

  2. Why is this process in the manual if it is not executable (without doing something to another additional Set up)?

  3. it's probably among the requirements of setting up more critical even easier for using MainStage with a live band, so why am I having to ask for help at all!

  Rant on (its been a long day)

  Grateful for any help to solve cela. I guess I can send the metronome (such as a click track) and speech signals on the same outputs, which are separated from the rest of the Concert... or should I change the outputs on the other tracks and keep the outputs 1-2 for the metronome marks / voice?

  Thanks in advance for all advice and my apologies for my frustration. JM

  To access the output audio, you need an audio interface with several outputs.

• audio input to the air of the ipad

  We have an ipad air we want input audio anilog on my ipad. is there a way? We tried the camera with a usb audio adapter, but the ipad says that it is not supported. The 32 plug is heavy and I don't like the way he wants to bend.

  What other way can I place audio level line on recorder pro or another application

  Help, please

  you need a socket Doubler minijack 3.5 mm he splits the connector audio output and microphone input

  Like this

  http://www.eBay.com/ITM/3-5mm-stereo-audio-male-to-2-female-microphone-headphone - Splitter-cable - adapter - / 371299679312

  It's really just a mechanical division of the son in order to get a bunch of different versions

• Driver problem audio dc7800 on the new version of vista

  Hello

  Ive rebuilt a dc7800 with vista ultimate, Ive used the drivers from the HP site for audio, vista installs its own drivers automatically in a first time, Device Manager indicates that they work well, but no sound, so I get the driver for vista off HP site, those in Device Manager, install manually again, vista said they work they are not... If I try and just use the executable on HP website for vista drivers, I get a message saying my hardware is different from installing drivers Im for and installation will not be completed, I so try and add them manually with the *.inf in Device Manager, it adds this way, but they are just used to work...

  Ive has spent a lot of time on it, scoured the forums... Can anyone help? It should be a model of support for vista because it comes with vista enterprise... edition, so there must be a pilot on board sound somewhere for me

  Ive tried the audio drivers for all versions of vista provided on the download page of hp drivers, Ive also tried the xp drivers, Ive been to the realteks site and got the driver generic 29 MB for vista that suggest of some forums, what does not work too...

  Please can someone help?

  Right, Ive solved... FINALLY! If anyone else has this problem heres whats happened... The card Radeon HD 3450 what ive put in the willing dc7800 of an HD Audio Controller integrated into the jury! NA not yet realize that... then I disabled the system HD Audio integrated on the dc7800 and it works fine now! I was that combining HD Audio in the bios as my advice on sound and since I wanted to use that was the last thing I thought of deactivation... but disabling that so it uses the controller audio HD built on the Board now gives me perfect sound through the onboard sound... job done

• How can I print the manual?

  It is a question that applies to my two recent purchases of SONY, a SONY kdl60ex720 TV and now a camera SONY DSC-HX100V. How can I print a copy of the users guide? This must been an oversight by SONYS CE Ministère, it is not very difficult to provide an option to print the manual page in its entirety not only one at a time.

  You can use Adobe Acrobat to print all I have manual from the Web site as a single pdf file. You can use the trial version of Acrobat for this work.
  Choose "Create a PDF file from the Web site" and copy the URL. Make sure "load the entire Web site" is selected.

• Auto volume leveling audio playback

  It's really annoying:

  His sound is amplified to sound at a reasonable level. When a strong part of the song comes automatically to the grave level then produce audio quiet parts annoyingly loud & the annoyingly quiet strong part... Sorry it's the best way I can describe this... once again:

  Only happens when its had seconds on silence (eg. break) - at this time the system begins to 'think' base volumes creeping upward for himself. Then when the song begins again you are treated volume which is quiet quickly when the system realizes, there is a higher level of sound through the...

  It's very frustrating because I use my computer to record & thus need to have audio playback to its correct level - not to the level of the computer think it should play to...

  I've raked by looking for an "auto off" option arrangements and have spent a lot of time looking for an answer online.

  Any help you could offer would be greatly appreciated.

  Thank you!

  Hi pablo647,
   
  Welcome to Microsoft Windows 7 answers Forum!

  We would like to get some more information from you to help solve your problem.

  You use any sound card on the computer?

  You can try to play the song even to a differnet headphones or speakers.

  I think it might be a problem with the sound card drivers.

  You can update the drivers for audio devices and try after that.
  1. click on start and then click Control Panel.
  2. click on system and Maintenance, click System, and then click Device Manager.
  Note that if control panel is in Classic view, double-click System and then click on Device Manager.
  3. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  4. in the device, expland 'sound, video and game controllers' Manager, the "sound, video and game controllers" right click and go to properties.
  5. navigate to the tab Update and then click on set to update driver.
   
  You can also check on the website of the manufacturer of the sound card and check if they have any updated drivers for Windows 7 and you are trying to install it.

  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.
  

  Visit our Microsoft answers feedback Forum

• HP G71-340US low volume when audio sound on the highest rate

  Very low volume with sound levels at the highest point, intermittent reception during audio streaming, loud buzz unknown sometimes for unknown causes. I own a hp G71-340US since 4/10... and am these audio problems.  Y at - it an update to fix this problem?

  Hi Sharopa

  Try reinstalling the audio driver...

  Follow these steps:

  1. click on start and then type devmgmt.msc in the start search box and press on enter.
  2. from the list of devices, expand sound, video and game controllers.
  3. right click on the sound card, and then click on uninstall.
  4 restart the computer.

  After restarting the computer, sound card get installed automatically.

  If the problem persists, please upldate the audio driver following the steps mentioned below.

  Install an updated audio driver