AutoCad LT 2004

Similar Questions

• AutoCAD LT 2004, Windows 7

  When you copy an item using X, coordinates and ORTHO, for example 0, -50 mode, the copy is found to the left and below the original. Even if used 0.50, the copy is in the same area. Can someone please help. Is it to do with the UCS, WCs, etc.?

  It is a group of Microsoft Windows support. If you want taken supported AutoCAD, go here...

  http://forums.Autodesk.com/

  .. and don't forget that AutoCAD is up to version 15...

• I have autocad 2004 that installs on windows 7, but I can't register the product

  AutoCAD lt 2004 is running on windows xp how ever when loaded on windows 7 it wont let me register the product that allows only a 30 day trial

  Try to open the program using compatibility and the attempt to save again.

  You can find more information on compatibility modes in the articles below:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question

• Help! My computer is blind not see my files

  I have AutoCAD LT 2004 and running it on Windows Vista. I have a very strange and frustrating problem.  Windows Explorer does not see my most recent AutoCAD drawing files. To save all my drawings on the following path: C:\Program Files\AutoCAD LT\Drawings 2004. In the drawings folder is where I put all my files of drawings. When I bring up Windows Explorer and look inside this folder of drawings, all of my old drawings are listed, but none of the most recent files are listed.  And I KNOW THE FILES IN THIS FOLDER because I can open them in AutoCAD.  Inside of AutoCAD when I click the icon to open the file, it goes to this folder of drawings and lists ALL my files, more ancient and more RECENT. When I open one of my recent drawings, on the top of my screen designs where is shows the name of the file, it displays the full path and it's the path C:\Program Files\AutoCAD 2004 LT\Drawings. But when I followed this path in Windows Explorer, the file is not listed. It's like AutoCAD can see the file in the folder of my drawings but my computer cannot. This causes a real problem because when I do my BACKUP, the most recent drawings are not copy on my external hard drive. This was recently a real problem because I needed to RESTORE a file from my backup drive, but couldn't, because it was not.  Any ideas on what is happening here?

  Hi Loydclayton,

  ·         You have problems with this file?

  ·         You upgrade Autocad?

  The folder may be hidden, encrypted or there could be a change in the settings folder.

  Using the files in the Panel Options, you can change how work your files and folders, as well as the display of the content in your folders.

  You can reset the folder options and check if it works.

  1. click on Start > Control Panel > appearance and personalization

  2. click on options files > view , then click on records reset.

  3. check if you are able to see your files.

  4. you can also check if the folders are hidden.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-folder-views-and-behavior

  Encrypt or decrypt a file or folder
  http://Windows.Microsoft.com/en-us/Windows-Vista/encrypt-or-decrypt-a-folder-or-file

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Unable to load AutoCad 2004 on the new computer that is running Windows 7 Pro

  I tried to load AutoCad 2004 on new computer w / windos 7 Pro, but it does not work. Any thoughts?

  Hi hms9947,

  Auto Cad 2004 is not compatible with Windows 7.

  I suggest you install Auto Cad 2004 in XP compatible mode.

  Follow the steps to install in compatibility mode

  a. you must make a right click on the program and go to properties and click on the compatibility mode.

  b. you must click the run this program in compatibility mode for check box.

  c. you need choose the type of operating system you want from the list so that you can run the program as desired with the operating system compatibility.

• How can install autocade 2004 to win7 64 bit

  I have hp pavilion dv6 i7 operated window 64 bit. Please tell me how can install 2004 t0 atuocade 2009. its used the 32-bit system.

  autocade? or autocad?

  Since Autocad Web site - http://forums.autodesk.com/t5/AutoCAD-2004-2005-Archive/Acad-2004-on-Win7/td-p/2632980 - "actually his native running in Win7x64. No problems so far" so it implies that he can. "I can confirm that autocad 2004 installs and works natively on the regular version and pro to windows 7 (64-bit) without the need of modes of XP" - http://forums.autodesk.com/t5/AutoCAD-2004-2005-Archive/Autocad-2004-and-Windows-7-compatibility-in-XPM-mode/td-p/2567379/page/2

  But the progs W7 compatibility seems to suggest otherwise - http://www.microsoft.com/windows/compatibility/windows-7/en-us/Search.aspx?l=en-us&type=Software&s=autocad&os=64-bit&page=1 and links out of a path of evolution.

  Have you tried installing and running in XP SP3 compatibility mode? - http://www.sevenforums.com/tutorials/316-compatibility-mode.html , try a few parameters as "run as XP - SP3" and check "run as Administrator" may be.

  
  

• AutoCAD 2004 does not work in Windows 8.

  Original title: program programs Application Applications compatibility.

  Hi I bought a new computer with Windows 8 and installed my autocad 2004 software program that worked very well with Windows XP and now when I try to open the program it does nothing that it does not open. help please, thank you.

  JLR925

  It is not compatible.  See here http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=19048377&linkID=12305695

• AutoCAD 2004 is not running under windows 8

  Try to install autocad 2004 on my new Toshiba laptop windows pc 8 and it does not work after installation. Anyone could offer any help. Thank you.

  AutoCAD 2004 is not compatible with Windows 8. You must upgrade to a newer version as AutoCAD 2014. Ironically, this version of AutoCAD is 10 years old.

• Error 1325: [filename] is not a short file name valid when tried to install AutoCad

  Original title: Microsoft is not a valid short file name

  Hi, my name is Kenya Caldwell and I tried to install a program called Autocad, whenever I try to install the program, I get a message that says that Microsoft is not a valid short file name.  I received a response from Autocad, but I don't understand or know if they are correct, could someone help me?  The message from Autodesk is down below.

  Error 1325: [filename] is not a valid short file name

  Question

  The installation fails and the following error message:

  Error 1325: is not a valid short file name.

  Solution

  This error indicates that Microsoft® Windows® install fails to write to the target folder. The following troubleshooting suggestions may resolve the issue:

  • Check the permissions on the target installation location.
  • Check that the target location.
  • Check and remove the spaces or special characters in the installation path target. (Note: this suggestion does not apply to products based on AutoCAD® 2004 and more.)
  • If it is a deployment, make sure the target path is properly formatted (UNC) and defined in theappsetup.inf file, which is located in the folderimage .
  • If the target location is one drive other than the system drive, try to change the target in a directory on the drive system (usually the drive C).
  • Try to re-create the deployment.

  Kenya Caldwell

  Salute to the Kenya,

  Try these steps and check the result.
  Step 1: Check and delete the program AutoCAD
  see How to change or remove a program in Windows XP .
  b. Once you find the program AutoCAD in the list, select it and remove it.
  c. restart the computer.

  Step 2: Install the program by following these steps:
  a. connect you as an administrator, click Start, click my computer.
  b. open the C drive, open the Program Files folder.
  c. right-click in the empty space and click on new folder, call it as AutoCAD program.
  d. open the AutoCAD installation file and start the installation.
  e. find the C:\Program Files\AutoCAD program installation location, and then click ok.
  f. check if installation continues and completes successfully.

  For Windows Installer errors, see How to troubleshoot issues that may occur when you install a program

  For further assistance, please post your request to AutoCAD Discussion groups.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Export from Adobe Illustrator and AutoCad 2009

  Hello

  I worked for a while on the profiles in Adobe Illustrator, export as a DWG 2004 file and insert block in a file AutoCad wood molding. I have architects may use these profiles of moulding of wood and I had problems along the way by moving from one program to the other. I have more than 500 of them redrawing in AutoCad is not really wanted an answer.

  When I try to insert the DWG Illustrator files I get an error message saying "the NLS files required to convert the names of entities and text symbol is not found on your system". There is no text in these files, just some line drawings. So it's ok.

  But when I place the DWG file in AutoCad, there is nothing there, or just the points. Someone had a bit of luck integrating an AI DWG AutoCad file?

  I thank very you much for any help.

  Well it depends on the work and the output... but I prefer the format of Raster PNG file (not that it's a dif in the real side of things 'work', also what scale work you need, and depending on the work, you can or mentioned should check the thickness scale.) Also check text.

  G

• help understand my next mac mini... from 2004 model!

  I really admire the mac mini, I bought in 2004 and it works oddly, except for the internet.

  I would like to 'upgrade' or buy one with a more recent CPU/microprocessor. What should I buy? I've heard via internet models end 2012.

  I find it useful to have a disk drive so I can burn CDs, although I suppose that there is a way to connect the old mac mini to the new and so use the old one as a storage unit with a usable CD player.

  The software I have on the old one is perfectly fine, so I would be able to run such things if I can.

  Pointers would be really useful. Particularly on what stage model, what should I look for, or what you think, this is the kind of considerations, I need to assess. (I mean, mega - storage is not a big concern of mine: I does not store the art/film/music to any large degree.). I think it would be interesting to use Bluetooth for listening to music via Bluetooth speakers (which are good quality inexpensive Bluetooth speakers?)

  Just Mac Mini have you? One was introduced in 2005. The 2005 those equipped with a Power PC processor and can go as high as OSX 10.5.8.

  The 2006 and later have Intel processors.

  First applications have been written for Power PC processors and will be running on an Intel processor only if Rosetta is used. Snow Leopard was the latest OSX to incorporate Rosetta. A Mac cannot run an OSX version earlier that OSX initially provided with the Mac as a previous version do not have drivers for the hardware.

  The mid level Mac Mini is a good Mac and comes with 68 GB of memory. I wouldn't buy a Mac with less than 8 GB of memory.

  To share with the other Mac, you can use the sharing of files and sharing of CD disc. Those who work on a network.

  You can also start your old Min I in target disk Mode and connect the two via FireWire (for a Mini more recent yo need a bolt of lightning > FW adopter and a FW800 > FW400 adopting as the old Mini FW 400)

• Designjet 500 proposed purple colors AutoCAD printing gray

  We used the Designjet for years and have several colors put in place to print gray and projected (252, 253, 254 and 25).  They have recently started with purple print.  I have run all diagnostics and calibrations and alignments available, and they are all good.  I looked at several troubleshooting sites and had no luck.  I use AutoCAD v 13.

  Assuming that the print heads are out of all the colors correctly, try this:

  The printer HP Designjet 500 and 800 series printers have a fix that was implemented in the version of firmware A.02.08 and higher. This hotfix provides additional media profiles that prevent blue to mauve color output change. This fix is only applicable to the series 500 and 800 and only if the printer has a version of firmware of A.02.08 or higher. Once the firmware has been upgraded, follow the steps below to make the appropriate changes in the Panel menu front printers:
  
  1.
  
  Highlight the menu paper icon on the display on the front panel of the printer and press ENTER.
  2.
  
  Scroll to the paper type and press ENTER.
  3.
  
  Highlight Enhanced colors and press ENTER.
  4.
  
  Select the type of paper there and then press ENTER.
  5.
  
  Press the Menu key to return to the normal display of front panel

• Qosmio E-10: Win XP MCE 2004 upgrade

  Is is possible to install Windows XP MCE 2004 2005 version on my Toshiba Qosmio E-10?
  What should I do? How much does it cost?

  Hello

  If you want to upgrade your operating system, you can buy an original Microsoft Windows XP MCE 2005. All what you can do with the OEM Toshiba version is to download software updates.
  See the Microsoft Web site:
  http://www.Microsoft.com/windowsxp/downloads/updates/mediacenter.mspx

  Concerning

• Portege R700 - Autocad 2011 does not recognize the graphics card

  Hello

  I have toshiba Portege R700 with 64-bit win 7 installed.
  I need the computer for use with autocad 2011.

  For some reason any auocad does not recognize the graphics card installed on the computer.
  I suspect it because very little memory is allocated for the graphics card.

  How can I change with the memory allocated for the graphics card, or perhaps, can someone show me where can I find a driver that supports autocad.

  Thank you very much!

  Hello

  What Portege R700-xxx you have exactly?
  As far as I know the graphics memory cannot be assigned manually.
  Everything is controlled by the graphics driver and you have no influence on this

  You can try updating the graphics card driver maybe it would help.
  The most recent driver found on the page of the European driver Toshiba
  If not, you should check the manufacturer of the graphics chip driver

  Good luck

• What Macbook should I buy AutoCAD?

  Hello!

  I just want to ask, what macbook should I buy AutoCAD? I plan to buy the Macbook Air w / core i5 but I saw in some discussions that it is not recommended for autocad... is this true?

  BTW... I am a student in engineering, and I'll use it at school it's why I do not prefer the Macbook Pro because it's big, bulky and heavy. I want the Macbook Air because it's elegant, light and it fits into my bag. And also I need the cheapest possible that's why I prefer really the model of Air. (because I'm just a student and my savings from my job part-time is not big so my budget is tight and only around $ 400-600)

  I need it after this break.

  Thank you! Prospects for a helpful answer.

  I'm not familiar with the application, but I suggest that you contact the school and get recommendations from them for minimum requirements as well as the developer of the software.

  Ciao.