AutoIncrement for Oracle 12 c?
I wish I had the DDL generated to create an identity column according to the new Oracle 12 syntax when I select the option "autoincrement" under the column settings in the relational model.
For example, I would like this:
CREATE TABLE identity_test_tab)
ID NUMBER GENERATED ALWAYS AS IDENTITY,
Description VARCHAR2 (30)
);
However, the DOF currently being generated use a trigger and not the new syntax of identity even though I 12 c selected for both physical and relational models. SQL Data Modeler takes by generating the DDL with the syntax of the IDENTITY of AS ALWAYS GENERATED?
Hello
SQL Data Modeler takes by generating the DDL with the syntax of the IDENTITY of AS ALWAYS GENERATED?
Yes. You should check your settings in ' preferences > Data Modeler > model > physics > Oracle "you have a few options here. You can change this at the level of the spine in the physical model if some columns do not follow the rule set in the preferences.
Philippe
Tags: Database
Similar Questions
-
Electrodes for Oracle spatial 11.2.0.4.0
What patches are needed for Oracle spatial 11.2.0.4.0?
I don't know what kind of response you expect an open question...
Simply apply the last power supply and go from there.
Bryan
-
Dear Experts,
Is it possible to configure replication of SAN (active-passive) integrated security for oracle for oracle?
To get the RTO < 60 seconds
- If the primary host fails, the remote site should have the option to start the oracle database.
- Sites are geographically remote.
SAN storage replication, can it be used in my scenario?
- I have no option to implement oracle Data Guard as its very expensive.
Is that what someone achieved something similar with SAN storage replication?
- I have oracle SE.
- It is obvious that the all-flash backup can be quick.
What should be the strategy to have DR site get a few seconds, if the primary site failed for some reason any
- Daily incremental backup with RMAN. And archive backup runs for every 1 minutes
- To have the site of DR upward and running within 60 seconds, it still requires too much time to restore the database on remote site and have archive APPLIED setpoint
- What could be the solution with san replication? RTO is 60 seconds
Thanks and greetings
SAN storage replication, can it be used in my scenario?
I have no option to implement oracle Data Guard as its very expensive.
--> If you want to use the data that it is free of CHARGE, additional license is not required for normal data guard
--> additional license is only for the ADG
Is that what someone achieved something similar with SAN storage replication?
I have oracle SE.
It is obvious that the all-flash backup can be quick.
--> Here, I understand that if oraclle EA is going to be expensive
--> Again, you can use manual standby
--> What you are looking for SAN replication, you will need to check with the storage vendor
--> If your intention is to check with oracle storage, then this may be the correct discussion room
What should be the strategy to have DR site get a few seconds, if the primary site failed for some reason any
Daily incremental backup with RMAN. And archive backup runs for every 1 minutes
To have the site of DR upward and running within 60 seconds, it still requires too much time to restore the database on remote site and have archive APPLIED setpoint
What could be the solution with san replication? RTO is 60 seconds
--> If your intention is to check with oracle storage, then this may be the correct discussion room
Check in this
https://community.Oracle.com/community/Server_%26_storage_systems/storage
-
Code review for Oracle 11 g Administration Dataguard
Can all give the code to review for exams for Oracle 11 g Dataguard Administration code.
Thanks in advance.
There is no review of Data Guard 11g. The review of Data Guard Administration 12 c is 1Z0-066:
-
Compatible Linux RHEL (Linux Red Hat Enterprise Server 6.7) for oracle database 11.2.0.4 with grid Infrastructure.
Hi all
We plan to patch Linux Redhat Enterprise Server (6.4 and 6.5) to 6.7.
I tried Searchin' on support of oracle for the compatibility of the database for Linux patches, but not able to find accurate information.
can anyone share the ID document or information related to it.
If OS RHEL 6 update 4 to 6-7 update patch
(1) is it compatible
(2) bugs or problems reported
(3) in addition to the binary link again than the DBA to perform any other
Thank you
Hello
6.7 RHEL is certified for the database 11.2.0.3 or newer. In other words, it is certified for RHEL 6.7 11.2.0.4
Certification information for the Oracle database on Linux x 86-64 (Doc ID 1304727.1)
-Jonathan Rolland
-
We are in the streams we want to use the tools of replication of database of 3rd party for Oracle freeware. Pls suggest
Hello
GoldenGate and shareplex are large databases for heteregenous platforms oracle replication tools.
Shareplex replicates data between heteregenous platforms for example source on Linux and Windows.Shareplex target come from queues so that when we define it a few tables in the configuration of the source files, it will get automatically reproduced in the target database.
SharePlex 8.6.2 technical documentation
Concerning
Rami
-
Hello fellow pioneers OEM.
I am trying to locate the Oracle Application Management Pack for Oracle E-Business Suite Guide 12.1.0.4.0
I have a beautiful SR but still no answer on that of the analyst. Thank you.
DA
Currently the latest version of MPA is 12.1.0.3.0
-
Path of the environments for Oracle EBS (Profile)
I have a question about setting up my profile for Oracle EBS. I just installed Oracle EBS on 2 nodes. Now I have to run the commands manually instead of being able to type them on the command line. An example:
Instead of typing adstpall.sh, I have to do $ADMIN_SCRIPTS_HOME/adstpall.sh.
Also with the automatic configuration service. I have to go on the dbTier in $ORACLE_HOME/appsutil/bin and run adconfig.sh and I have to go on the appsTier in $INST_TOP/admin/scripts and run adautocfg.sh but I want to be able to type adautocfg.sh anywhere and it will work
There are also things as adpatch and adadmin, etc., I want to be able to run
I don't know that there are several environment files in Oracle EBS. Anyone can guide me please to put up my profile so that I can use one of these commands from anywhere in the file system. I've never had to do before. I know they have to be in my .bash_profile, but I don't know what should go and what should not go. Please help me in this regard.
Thank you
-Change the .bash_profile
-Add the following entry to the file:
source
/APPS Nom_du_contexte > .envOr,
.
/Apps Nom_du_contexte > .env - there's a point before the script-Save the file
-Connect again as the operating system
-Issue "env | ranking"to check
Thank you
Hussein
-
ODI 12 - problem with LKM SQL for Oracle
Hi again,
Three days ago, that I asked about the problem with the data types of data warehouses in models that were missing. After you apply the ideas suggested by Rita (thank you very much ) I got from their work.
But after that, we came across a new problem. When you run a mapping (Oracle for Oracle databases), it failed on the second stage - ' "work table create. "When we checked the generated code was something like this: '(" CREATE TABLE < work_table_name >). None of the names of columns or data types have been described in parentheses and as expected, the ODI execution error was "invalid identifier". It seems that API
odiRef.getColList(params)%>
does not work. I tried loading using LKM Oracle Oracle (DB LINK) but once again the columns are missing in the generated script.I have to mention the master and work repositories are different databases from Oracle and ODI Agent is not installed because of some problems.
We are still beginners of ODI and would appreciate any help from more experienced guy (or other beginners).
Thank you in advance.
Just by chance, we found the soluton today!
The reason of missing generated code was that the description of the types of data was not entirely cofigured.
We found that the fields "create table syntax" and "'syntax of data accessible in writing' in each type of data in the topology definition were empty." After filling them, the generation of the script is running properly.
Before that we had problems with missing data types in models and we realized the reverse engineering of the types of data, but obviously it is insufficient.
Thanks to all those who participated in the discussion and tried to help us!
-
How can we export itno csv data file for oracle forms
Hello
How can we export itno csv data file for oracle forms
For example. I have the block called A.what never the data displayed on a block, when I click on a button, displays the block data, must be exported to the csv file.
My application is running on the unix operating system.
Please help on this.
First of all. What is your version of forms (for example: 11.1.2.2.0 not 11g). Finally, who will use the .csv file? If it is a user on their client computer - CLIENT_TEXT_IO TEXT_IO or WebUtil are standard packages used to export data to a file of Oracle Forms.
The amount of data to be exported? If you export only a couple hundred lines - export of Froms will be OK. If you export more lines than that (300 + lines) then the export will be extremely slow to your username. Keep in mind that forms is not designed to perform data exports - there are better tools available for this...
Craig...
-
Not a dba and need help for Oracle 11 G
I have install an output db in space and I can't get the client that I work to install the spacewalk to connect to the db.
output in the configuration of the client space (research forward and reverse and can ping by short/longname and IP.)
# output extravehicular-installation - disconnected - external-db
* Setting the Oracle environment.
* Setting up database.
* Database: set up the connection of database for Oracle backend.
Name of the database service (SID)? spcwlk
Name of database to host [localhost]? spacedb.domain.com
Database (listener) port [1521]?
The database connection error: ORA-12543: TNS:destination host unreachable (DBD ERROR: OCIServerAttach)
DB server
listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = spacedb.domain.com) (PORT = 1521))
)
)
ADR_BASE_LISTENER = / u01/app/oracle
lsnrctl start $
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 18-SEP-2014 11:17:37
Copyright (c) 1991, 2009, Oracle. All rights reserved.
From /u01/app/oracle/product/11.2.0/dbhome_1/bin/tnslsnr: Please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
System settings file is /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/diag/tnslsnr/db-obrien/listener/alert/log.xml
Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=spacedb.domain.com) (PORT = 1521)))
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start date 18 - SEP - 2014 11:17:39
Uptime 0 days 0 h 0 min 0 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file
The listener log file /U01/app/Oracle/diag/tnslsnr/spacedb/listener/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=spacedb.domain.com) (PORT = 1521)))
The listener supports no services
The command completed successfully
Hello
Please add below lines to your listner.ora file and reload the listner.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME =
) (ORACLE_HOME =
) (GLOBAL_DBNAME =
) )
)
Thank you
Jihane Narain Sylca
-
Edition of database repository for Oracle Grid Control
Can the repository database for Oracle Grid Control standard edition? Company limited license and cannot use enterprise edition for Oracle Grid Control. Please notify. Thank you very much!!
The requirement is due to the EM dependency on partitioning, which is an option of EE.
EM 12: Enterprise Manager Cloud control 12 c requires a repository database Enterprise Edition (Doc ID 1438655.1)
Overview of the prerequisites set EM
To ensure that the existing, certified Oracle database has the Option of partitioning enabled (therefore, make sure that install you it in Oracle Database Enterprise Edition.) Installation and use of the option of partitioning in the Enterprise Manager repository don't add fees to customers when it is only used by Enterprise Manager.
-
Database / reference for Oracle Financials 12.1 Manual techniques
Hello
In 11.5.X there used to be a large number of textbooks, which had detailed data bases; -Starter key, foreign key, columns, table names, etc. I think that they have been called MRT.
I am struggling to find the equivalent document for Oracle e-Business Suite Financials 12.1, anyone can help please?
Thank you
Robert.
Found!
-
SnapManager for Oracle error when creating profile
Hi all
I am deploying Snapmanager for Oracle on Windows and I get the error below, while I am trying to create a profile for a DB. Can help me solve this problem.
-[WARN] SMO-12104: unable to connect to the database to perform the check. Database may not exist, may not be running, or the listener cannot be executed. Error's Oracle: ORACLE-10005: unable to connect to the instance of database ST88 using JDBC connection string JDBC: thin: snapmanager_ora/XXXXXXXX @(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = HostDB1)(PORT = 1521))) (CONNECT_DATA = (SID = ST88))). Error: Listener refused the connection with the following error:
ORA-12505, TNS:listener is not currently of SID given in connect descriptor
Used by the client connect descriptor was:
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = HostDB1)(PORT = 1521))) (CONNECT_DATA = (SID = ST88)))
.
-[ERROR] SMO-05075: profile create failed: ORACLE-10005: unable to connect to the instance of database ST88 using JDBC connection string JDBC: thin: snapmanager_ora/XXXXXXXX @(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = HostDB1)(PORT = 1521))) (CONNECT_DATA = (SID = ST88))). Error: Listener refused the connection with the following error:
ORA-12505, TNS:listener is not currently of SID given in connect descriptor
Used by the client connect descriptor was:
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = HostDB1)(PORT = 1521))) (CONNECT_DATA = (SID = ST88)))
Thank you
Noelie
> ORA-12505, TNS:listener is not currently of SID given in connect descriptor
How is the * auditor * configured?
You try to use a SID in the connection descriptor. The listener listen to this SID? Check the STATUS of the listener.
Hemant K Collette
-
Developer equivalent Edition for Oracle?
I'm a software developer and database which currently specializes in Microsoft SQL Server, but I'd like to be able to offer Oracle to my customers as well. I use SqlServer MS SQL Server Developer Edition on my laptop, which has all the technical features of SQL Server, but is allowed only for development purposes and is very cheap (under $ 150).
I took some training for Oracle, but I would get something similar for learning, practice, try things and development on my laptop. Is there something equivalent available for Oracle developers? I tried Google this, but that just begins to turn upward of "SQL Developer for Oracle" which I * think * is just the developer GUI and not the DBMS itself. (?)
If it's important, my laptop is running Windows 7 x 64. Thank you...
You can use the version business development for free and download from OTN.
See the license here: terms of the OTN Developer license
But if you want to go to production, you will need a permit.
Do not use XE for development - because it has several limitations - if your customer is going to buy a license.
Post edited by: Zoltan Kecskemethy
Adding link license
Maybe you are looking for
-
Windows XP, battery indicator disappeared
After that I did the update of Windows (Windows XP), the blue battery indicator disappeared from the taskbar. Normally when the computer ran on battery there is a battery next to the clock indicator and shows the battery level. Now I see the battery
-
CVI, deletion of a prototype of CB...
.. translation I update my .uir file. The prototype in question is a reminder, but not for a user interface element (I suspect this is the reason why it is deleted). It is a reminder to the ConnectToTCPServer() function. Anyone can shed some light on
-
How to find programs that run in the background?
My computer is slow to open. I ran the Viper virus program regularly. I feel like there is much running in the background that is not visible to me.
-
Windows 7 unable to save any file - "there is no file" message appear in the control box.
Hi all, Thank you in advance for you answer my questions: Windows 7 can't save the file after I've updated yesterday. I can't save any file of all applications including Microsoft office (Word, excel, Powerpoint etc), I can't save any download from t
-
Why Windows 7 Prof 64 bit because most of the games are placed on 64 bit 32 bit
Don't work very well on this system at all.